Multiple SAP Deliveries for a single container

SAP is creating deliveries for single purchase order. Multiple Deliveries are shipped together in the same container. At the end of the day, within WM we only want one ASN (Advanced Shipping Notice)to contain all of the information for the one physical container on WM.
Regards
Manoj

Hi Manjo,
Did you ever get a solution for this?
Kind Regards,
Finbarr

Similar Messages

  • How to create the multiple spool requests for a single report.

    Hi gurus,
                     I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
    now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
    And one more question is can we create a spool request for a report which is running in online.
    waiting for inputs frm gurus.

    Hello,
    As per my knowledge for creating new spool id you will have to set
    output_options-tdnewid = 'X'.
    and then using
    job_output_info-spoolids
    create a pdf using
    call function 'CONVERT_OTFSPOOLJOB_2_PDF'
    Rachana.

  • Multiple PO's for a single PR reg

    Hi,
    The system incorrectly allows multiple PO's for a single PR.Then,I configured message no 00 06 076 & 400 as a error message and system is not allowing mutiple PO's for single PR and if PO Qty is greater than PR it's not allowing and it's ok.
    Now the issue is If PR qty is 2 and as per requirement 1 qty for one vendor and one more qty for some other vendor and two PO's are to be created and the system is not allowing and throwing error message.
    Can you pl.throw some light on this issue.

    Hi
    It is not incorrect to have multiple POs for single vendor as we might have different vendors for the same item. Secondly the message setting what you have on 00/06/076/Materials of requisition & item & alr. ordered in full- E is used to stop POs being created from the PR once PR quanitity gets consumed.
    Now i do not think system will ever stop you from allowing to create multiple POs for a PR if you are distributing the Quantities between different vendors.
    By setting the message 00/06/400/Materials/services for requisition & & already ordered with & & to E mode you are blocking the PO creation with altaernate vendors change it to warning mode.
    Regards
    Edited by: samuel mendis on May 8, 2009 8:42 AM

  • Multiple Sales Order for a single complaint in QM Notifications

    Hi Folks,
    We have a situation in a company i.e. migration from legacy system to SAP QM Notifications for customer complaints.
    The business needs to accomidate "Multiple Sales order for single complaint".
    Can someone suggest are there any customizing options "Assigned Objects" ?? or how can we achive this functionality.
    Thanks,

    Dear Sandeep,
    1) We don't have facility like One notification capture Multiple sales order, but you can do one thing day first you create one notification with reference sales and capture all sales orders in subject so that when ever you check Notification  you will get idea  This many sales order link with the notification.
    2) Diffects also you can capture agaist sales order like enter manually in Text
    I think this is help full for your business reqirement

  • Multiple Shipping Addresses for a single Ship-to-Party

    Hi all,
    How can we maintain multiple addresses for a single ship-to-party.
    The customer has 4 locations and whenever he places a order he wants the goods to be delivered to one or more than one address .How to do this?
    I tried to find it in the forum but I din't get a satisfactory answer.
    Regards,
    Ajit

    Ajit
    You may use Text for your requirment...
    Better Create a text type say Shipping Address... and assign to a sales order....
    Keep that in the Incomplete Log... so that when ever you process the sales order end user is in need to complete the Address....
    Another way is Ask ABAB er To change some field relevent to the customer as a Shipping address or may be Z field and use the same to the address..
    I have not used this check with your ABABer
    Reward if usefull
    Muthupandiyan

  • Broadcasting via Bursting to multiple email address for a single vendor cod

    Hello -
    I have a requirement to broadcast out a web template based scorecard to multiple email addresses for a given vendor code.  We have gotten it to work via a single email address, but I need to send it to more than one email per vendor code.
    Has anyone else tried this?
    Thank you!

    Hi Chris,
    If my understanding is right, you must be using the master data of vendor Code(Which has an attribute to store Email IDs).
    You can add multiple email ID to the same master data separated by semi colon ";"
    If you are using user IDs instead, I dont think it is possible to use multiple user ID in the same attribute.
    in this case you need to enhance the master data with a new attribute to store the second user ID and the  create a separate setting for this attribute.
    Hope this helps.
    Regards.
    Shafi.

  • Single invoice against multiple sales order for a single customer PO

    Hi all,
    Customer provide a single order via EDI per Depot.  When the order is received into SAP these are split into multiple order based on the Production or distrubtion location of the products. The customer will receive a number of deliveries to the depot from the various locations.  Each delivery has his own SAP sales order and delivery note.  This creates mutliple invoice against a single Purchase order sent by the customer.
    We have a requirement from two customers that they only wish to receive a single invoice per depot per day.   This means we need to change the way we currently invoice the customers(no multiple invoices needed).We need to be able to combine multiple deliveries with the same PO to a single invoice.  This would mean that the invoice can't be generated until all the deliveries relating to the single PO have been POD flagged or 7 days  have passed from PO date and invoicing is due.
    how to achieve the above,whether through user exit in billing or data transfer routine in copy control(delivery to billing) or through config and how ??
    regards
    sachin

    Hi Sachin,
    You will have to create a new data transfer requirement on the copy control between the delivery and the invoice. In the new data transfer requirement, you will need a programmer to code when there should be an invoice split.
    Regards,
    Finbarr

  • Multiple SAP products on a single server

    Is it possible to install ERP 2005, BW, CRM, SSM and EP on a single server without virtualization? This is only intended for non-productive instances (DEV & QA)
    I would also like to know if SAP has any information on this?
    Thank you
    Aubrey

    Welcome to SDN Aubrey,
    It is possible to do this assuming all the applications versions support the same DBs. You will have to size the server additively - you don't really save a CPU, memory, or Disk.
    You have 2 options here:
    MCOD: All the applications share the same DB but are separate applications with SIDs. Note that all applications must support the same release of your DB.
    Separate DBs: All applications have separate DBs (assuming your OS/DB supports multiple installations).
    There is a lot of good information in the master guides (SAP NetWeaver, mySAP ERP, and mySAP CRM). I'm not sure what SSM is?
    http://service.sap.com/instguides
    I hope this helps,
    Mike.

  • Include multiple SAP applications for implementation in CE ESR

    Hi guys,
    I would like to know whether it is possible to implement different services in the ESR of a CE environment in different SAP applications.
    For example operation 1 of outbound interface of process component 1 is implemented in the SRM system. The operation 2 of outbound interface of process component 2 is implemented in the CRM system.
    Guss it flys, but just want to be sure.
    If this works then use of PI is only necessary for A2A processes with mediation and B2B processes (adapter engine necessary), correct?
    Thanks a lot,
    Mane

    Hi,
    Yes, It'spossible.
    Eventhough we design the process components we implemnt the service interface.
    You can generate proxy for the service interface in multiple systems and implement only the required operations.
    Thanks,
    Abdul Raheem S

  • Multiple SAP systems on a Single LPAR

    Hi Gurus,
    We are planning to install ECC, BW, SRM, PI, EP, SolMan, NWDI on one LPAR on IBM i6.1 OS. I came to know that this is the common practice of installing SAP on IBM iseries.
    Do I need to review for any dependencies or the technical limitations?
    Obviously, the DB2 instance will be the same for all these systems and will be a MCOD solution.
    If you have done any recent installations on IBM iseries, please let me know the lessons learned.
    Thanks
    Kalyan

    Hi my friend
    No problem to have multiple instances installed in one LPAR, like you said it's the common way to place your non-prod environment. Just make sure that OS level parameters of AS/400 are well tuned for this many instances running together from performance perspective, use IT4J JVM for AS Java instead of classic JVM. Here's some FYI:
    Note 484548 - iSeries: 3 tier system installation
    Note 192658 - Setting parameters for BW systems
    Note 541508 - iSeries: Checking the system parameters for BW
    Note 307077 - iSeries: Performance optimization for BW systems
    Note: installing multiple instances in one LPAR doesn't mean it's a MCOD installation. They still have their own DB library, known as database on other platforms. In the case of MCOD, all instances will use the same DB library as database instance.
    Regards,
    Effan

  • OIM 11g R2 PS1 error in App instances page due to multiple prcoess forms for a single RO

      By mistake I attached two process definitions to a single resource object (RO) and it in turn mapped two process forms to the single resource object.
    Now when I go to application instances page and do a searc, it shows the below error in the UI
    IAM-4067027 : An error occurred in findAppInstances and the cause of error is An error occurred in getParentFormInfo and the cause of error is Multiple process forms exist for Test_Emp_RO.. 
    I tried to assign a different RO and Form to the second process def in teh design console, but it throws SDK update failure error. How to resolve this error?  Any inputs are appreciated.

    Check the for duplicacy in OBJ_KEY column of the process defination. If duplicate values exit then set them to 'null'  and commit. Restart OIM if required

  • Multiple payment documents for one single invoice

    How can print multiple checks for each line item on my invoice. I tried using individual payment in vendor master and company code and single payment for marked invoice in FBZP. I tried with both the options as well as combination of options.
    Please let me know how this can be possible..

    Point No. 1.
    If you are booking the invoice though MM module (MIRO, MIRA and MRBP) the accouning entry which will get generate is:
    DR. GRIR Clearing Account  50/-
    DR. GRIR Clearing Account  100/-
    CR. Vendor Account             150/-. (Only 1 line item will get generate and in this case system will no allo you to generate two payment documents)
    Point No. 2.
    If you are booking the invoice through FI module (JV using F-43 or F-02) and the accounting entry should be:
    Dr. PL GL account 50/-
    Dr. PL GL account 100/-
    Cr. Vendor Account 50/-
    Cr. Vendor Account 100/- (Same Vendor).
    In this case you can make the payment line item wise.
    Please check and revert.
    Uttam

  • How to pass multiple MDX values for a single parameter into a drill-through report?

    I'm thinking this will be an easy question for any experienced SSRS/MDX developers, at least I hope so!  I've created a report that gives the user the option to choose viewing data for the current/active week, or YTD.  Depending on which link the
    user selects, the report simply calls itself and needs to pass in the parameter value for Active week.  If it's active week, the parameter value will simply be "true".  If it's YTD, the parameter value needs to be both "True" and "False" so the current
    week's data is accounted for as well.  I've set everything up except for the final step, and I have no idea what to type into the Value field below.  I've tried different things: false, as you see below (it errors saying I'm missing the parameter
    value), the value in MDX format: =[School Dates].[Active Week].&[True] (it said I was missing a bracket), a 1 instead of the word true (again, missing a parameter value).  Nothing is working.
    So my question is kindof two-fold: 1) how do you pass in the value at all and 2) more specifically, how do you pass in multiple values (both true & false) ??

    I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
    To answer your initial questions, you are correct with both your assumptions:
    1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
    2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
    So in following your instructions, well that's the problem I'm not quite following :)
    1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden?  If so, I've done this.
    2) I'm not quite sure where to use the statement you provided me.  You said to put it in the dataset, but I don't know which dataset.  I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
    as a parameter).  If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties.  I tried this, and it did not generate any errors, but it also kept my report groups from displaying
    -- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
    I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there.  When I did this and ran the report, I would get the following error:
    The 'SchoolDaysActiveWeek' parameter is missing a value
    So what am I missing!? 
    Also, thanks for taking the time to respond!!

  • How do I select multiple email address for a single person in my address book when creating a new email?

    I am coordinating a large group of people and created a group list of over one hunderd people.  The group is families and each person in the address book has several e-mail addresses. How do I select all the email address under each person in the address book so every family member recieves the e-mails?
    It appears I can select any ONE email address but selecting multiples from any one person is not allowed, why is that? Any tips would be appreciated, thanks.
    LBD

    Not sure about this problem. But if you don't get an answer soon, go here which is the Mail forum for Leopard (which you listed in your sig).
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.5_leopard?view=discu ssions#/?tagSet=1017

  • How to add Multiple XML Tags for a single column for an RDF

    Hi Gurus,
    I have Requirement in the Oracle D2k Report from which we are generating the xml tags.
    My Requirement is in a table i have 2 columns say A and B.
    i am able to generate three xml tags separately using the report builder by clicking on the column name and in the xml setting giving the xml tag.
    eg: table Acount contains 2 columns A and B with respective data
    A B
    QT 1
    QTS 0
    QTR 2
    i am able to general xml tags like this
    <ACount>
    <AStatus>QT</AStatus>
    <HeadCount>1</HeadCount>
    </ACount>
    <ACount>
    <AStatus>QTS</AStatus>
    <HeadCount>0</HeadCount>
    </ACount>
    my requiremnt for the xml tags is
    <ACount>
    <AStatusQT>1</AStatusQT>
    <AStatusQTS>0</AStatusQTS>
    </ACount>
    kindly help me out how to achieve this requirment in the rdf file mulitple xml tags.
    all your input are most valuable to me, thanks in advance
    Edited by: 909577 on Apr 9, 2012 3:10 PM

    I'm sorry for being so dense, but I'm not quite following, although what I've tried makes me think if I can follow you, it will work :)
    To answer your initial questions, you are correct with both your assumptions:
    1) detailType is the parameter that specificies YTD/Weekly, this is a "report defined" parameter that I am using to determine which Row Group to display (either YTD or Weekly)
    2) SchoolDaysActiveWeek is the parameter that is being set to either true or false -- this is a field in the cube that states whether that record is for the current week or not
    So in following your instructions, well that's the problem I'm not quite following :)
    1) When you say Delete the SchoolDaysActiveWeek parameter from the report only, do you mean to mark the parameter as Hidden?  If so, I've done this.
    2) I'm not quite sure where to use the statement you provided me.  You said to put it in the dataset, but I don't know which dataset.  I assume you mean the "main" dataset (as opposed to the hidden dataset that gets generated when you mark a field
    as a parameter).  If this is the case, the only place I could see that would allow you to use such a statement is in the Filter section of the properties.  I tried this, and it did not generate any errors, but it also kept my report groups from displaying
    -- it just showed a blank report, so I think it probably wasn't bringing back any rows to populate them with.
    I also tried going into the Expression section for the SchoolDaysActiveWeek parameter in the second screenshot and placing the statement there.  When I did this and ran the report, I would get the following error:
    The 'SchoolDaysActiveWeek' parameter is missing a value
    So what am I missing!? 
    Also, thanks for taking the time to respond!!

Maybe you are looking for