Multiple slashes additional question

I use the filebrowser to select my links. However Dreamweaver
generates the ../../ (one folder back I was told) and can I change
the dreamweaversettings so that it don't??
Love&peace from Mark Cedermark.

>I use the filebrowser to select my links. However
Dreamweaver generates the
> ../../ (one folder back I was told)
You were told wrong. It's two folders back.
> and can I change the dreamweaversettings so that it
don't??
Why would you want to do that? How *should* that link look?
The most common cause for links that aren't properly made is
a site that is
not properly defined.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mace1975" <[email protected]> wrote in
message
news:gdmtte$je4$[email protected]..
>I use the filebrowser to select my links. However
Dreamweaver generates the
> ../../ (one folder back I was told) and can I change the
> dreamweaversettings so
> that it don't??
>
> Love&peace from Mark Cedermark.
>

Similar Messages

No carry multiplication and addition ....

i have issue with No carry multiplication and addition ,
Ex : of no carry addition
No carry addition is performed just like regular addition except that no carrying is performed, so 98 plus 37 = 25.
This is because 8 plus 7 = 15 and since the 1 is not carried, 9 plus 3 = 12,
and since the 1 is not carried, the answer is simply 25
Same with multiplication
192
X 43
376
4680
4956
in java any class for this type of calculation or how to calculate this type of equation... please help me
Edited by: mylocosoft on Aug 24, 2009 2:49 AM
Edited by: mylocosoft on Aug 24, 2009 2:51 AM

I think I got what it is about.
Still you haven't asked a specific question or told us where you are stuck.
Basically you just dumped your homework at us and ask us to solve it. That won't happen. And even if it would happen it wouldn't help you at all, since you don't learn anything this way.
I gave you some hints on how to proceed but you prefer to ignore them and effectively ask for "teh codez". Please don't do that.
And please [write in clear, grammatical, correctly-spelled language|http://catb.org/~esr/faqs/smart-questions.html#writewell].

What could be causing my multiple response survey question to show a non-response in LMS report?

I have a 10 question survey that has been running fine and providing accurate responses in reports generated from my LMS. I made a property change to a multiple response type question that is now causing the reports to show a date/time (2003-01-01 18:00:00) response instead of the actual multiple responses the user made. The change I made to the question was to change the "Numbers property from" [ a), b), c) ] to [ 1), 2), 3) ]. This property change did not affect the reported responses for the single response questions, only the multi-response. This problem occured Using Captivate 4. I then tried using the same properties in Captivate 5.5 thinking it was a bug in CP4, but got the same results. Has anyone else run into this issue? I'm going to bring this to the attention of my LMS provider, but want to make sure CP is clean first.
Thanks,
Dave

First things first. I am not an LMS expert, so this is not about troubleshooting.
However, to ensure that your course works fine on a SCORM-compliant LMS, you can upload it to cloud.scorm.com and test it out. If the course works fine there, rest assured that it will work fine on any SCORM-compliant LMS. If your LMS team comes back with an issue after this, you can counter them with this evidence that the problem is with the LMS and not your course.
Sreekanth

Partial-credit scoring in multiple response and multiple hot-spot questions

Hello everyone,
I'm calling on your generosity in the spirit of the holidays to help out a noob. I would like to create matching, multiple-response and multiple-hot spot questions where the user receives credit based on the number of correct answers within the question. For example, in a matching question where there are four items; if the user gets 2 out of the four items matched correctly, I would like for him to receive 2 out of 4 points.
I understand that Captivate doesn't support partial-credit scoring of this type, but a few posts have implied that it can be done with variables. Is there anyone who can walk me through this process, or send me to a link that will walk me through it? (I've scoured these forums and tried the Cp tutorials, to no avail.) And if it's not asking too much, please make it understandable to someone who has very little experience with variables.
Thanks, and Merry Christmas.
JR
(Running CP 5 on Windows Vista)

Hello,
I did publish an article more specific on partial scoring, perhaps this could help you:
Partial scores and customized feedback
And since you are asking for more basic information, on my blog I point to some other articles to explain the meaning of variables with/without advanced actions. Feel free to have a look (there are more postings about advanced actions and links to articles over there):
Curious about variables ?
Unleash the power of variables with advanced actions
Lilybiri

Multiple Headphone outs question

Hi there,
I recently asked for a bit of help getting my home studio setup sorted and I just need a bit more advice please!
While I'm experienced in the live room of a studio, I'm still very much an amateur on the other side of the glass! Basically I'm just putting together a basic setup to track some demo's / ideas with my band. So far, I've got a Motu 8PRE interface running the drum and instrument mics into Logic and the outs from the 8PRE going to the monitors. My question is this...
How do I set up multiple headphone outputs with independent mixes so band members can have a custom mix in their headphones? I'm having a hard time figuring out how this would work and have no idea what I need to do in Logic to set it up, and also what hardware I might need.
If anyone could explain this, both how to set it up in Logic and the kind of hardware I would need that would be fantastic!
Many thanks in advance

1) Yes
2) Sorry - I assumed that box had 8 outs too - I assumed wrong. You could get an additional multi-channel interface which accepts ADAT inputs as well as analog, which would give you great flexibility. MOTU makes several - better yet check out RME, Focusrite, and others. There are dozens on the market - it depends on your budget and future expansion plans.
3) Yes, or a headphone distribution system - but again, your budget will determine this. Hear, Furman and Aviom all have systems. Or for much less, Presonus headphone amps. Depending on your physical set up, you might need a snake unless you're using an already wired recording room.
Good luck.

Multiple Column Report Question

Post Author: LCS213
CA Forum: Crystal Reports
I'm creating a student transcript report that has multiple columns, and is three groups deep. The first two groups need to be in a columnar layout. However, I'd like the third group to contain a subreport that spans the width of the entire page.
Are there any options within Crystal XI to do this? I know in the Section Expert, i can format the detail level with multiple columns, and on the Layout tab, I can select "Format Groups with multiple columns". But that seems like it either formats ALL groups or NO groups. Am I mistaken? Is there a workaround I'm missing?
Thanks in advance for any help on this issue!

Hi Dan,
According to your description, we are not clear about the “6 sections for each Additional task”. Do you mean six data records? If so, based on my understanding, there are three groups and eighteen records in your report. You want to make those records appear
on eighteen separated pages, right?
In Reporting Service, we can add a page break to groups within data regions to control the amount of information on each page. In your scenario, you should add page break to group “Sub task”, group “Additional Task” and details. As we tested in our environment,
add page break to these records, the report appears in eighteen pages. Please refer to steps below:
1.On Group Properties of Details1, choose “Between each instance of a group” option on Page Breaks page. Please refer to screenshot below:
Choose same option on Group Properties for group “Month” and “Name”.
2.Click drop-down button next to Column Groups, then choose Advanced Mode.
3.Click on Static under Row Groups, set RepeatOnNewPage as True in Tablix Member Properties.
4.Click Preview, the results before and after adding page break look like below:
If you still have any question, please post some detail information or screenshot about the report design you expect.
Best regards,
Qiuyun Yu

Multiple page report question

My client would like to run a report by project. A project can have multiple sub-tasks and each sub-task can have additional tasks. Each additional task has 6 sections on the report which all need to be separated by page breaks. The report
need to separated by the additional tasks so in the example below I would have 18 pages of reports, grouped by Sub task and Additional task. How do I group this report to make it work correctly? Would sub-reports work better - still having trouble
with the grouping issue as well on those.
Project
         Sub task 1
                      Additional Task1
                      Additional Task 2
         Sub Task 2
                      Additional Task 1

Hi Dan,
According to your description, we are not clear about the “6 sections for each Additional task”. Do you mean six data records? If so, based on my understanding, there are three groups and eighteen records in your report. You want to make those records appear
on eighteen separated pages, right?
In Reporting Service, we can add a page break to groups within data regions to control the amount of information on each page. In your scenario, you should add page break to group “Sub task”, group “Additional Task” and details. As we tested in our environment,
add page break to these records, the report appears in eighteen pages. Please refer to steps below:
1.On Group Properties of Details1, choose “Between each instance of a group” option on Page Breaks page. Please refer to screenshot below:
Choose same option on Group Properties for group “Month” and “Name”.
2.Click drop-down button next to Column Groups, then choose Advanced Mode.
3.Click on Static under Row Groups, set RepeatOnNewPage as True in Tablix Member Properties.
4.Click Preview, the results before and after adding page break look like below:
If you still have any question, please post some detail information or screenshot about the report design you expect.
Best regards,
Qiuyun Yu

Additional question: How can I fix the refreshment settings, so that my browser doesn't destroy entered form information?

In addition to the question below, another problem is not only are my email responses erased when the browser refreshes, the message itself is no longer available. I have to start from the beginning point in my email list, rather than remain on the once-opened email.
By the way, I have reset and restored my Firefox as a solution, which didn't help. I did this twice, following instructions. The process was tedious and I had to recover quite a bit of information, not to mention a problem with merged bookmarks. I'd like to avoid this solution, at all costs. Here's what I said earlier. Again, thanks for any/all help you can provide.
For the past several weeks, now, I've noticed that my browser "refreshes" the feed more frequently, so frequently, in fact, that any emails, forms, or survey questions that I am answering get wiped clean. This started happening with the latest update. I am unable to locate any setting in my preferences that will stop the constant refreshment (reload? page update?). This is also frustrating when trying to make purchases on line, and as I said, write emails, complete forms, complete surveys, etc.
Thank you in advance for quickly resolving this most frustrating problem?
I use a Mac, and am running Mavericks. This problem was present with the previous OS, too. Thanks again!

A few moments ago I tried to type an elaborate message and commended your site here for sitting still long enough for me to enter my message without being devoured by the “refresh feed.” Unfortunately, the page refreshed and wiped away my brilliant response to your questions. I will try to answer more briefly, and will cut and paste my reply. I pray that I don’t have to do this repeatedly. Here goes:
1. I used the term “refresh feed” because that was the only way I knew to describe it. For example, the ads change regularly in the NYT Online. I do subscribe to that. The pop-up alert has been coming far more frequently than before, and the ads are coming far more frequently than before. I see a correspondence between the refreshed ads and the change in the webpage. This is why I called the problem “refresh feed.” By the way, I have my pop-up block set to block.
2. I use Desire to Learn (D2L). I don’t subscribe, per se, but it is a password-protected site I have to use for my work. Within D2L, when I try to compose a message or respond to a question, what I write is immediately erased when the page refreshes, which is quite frequently. I am forced to compose on another program, as I’m doing now, and pray that I can paste my message in before I lose the entire email; I have to reenter the “to, from, subject, message,” and so on. I’ve had to do this over and over and over and over for just one message.
3. The issue happens when I use Outlook online. At least there I get a question asking if I really want to leave the page. Of course, I don’t because I’m still composing my message. I’ve taken to saving the messages frequently. I can’t do that in the D2L app.
4. This issue happens when I am just browsing a webpage for which I have no affiliation. The page will refresh and I find I’m back at the beginning of the initial page, or the beginning of an article I’m reading (if I’m lucky) or series of photographs or whatever. My place is lost. I often have to start all over again. It’s as if I’ve never been there.
5. This issue happens when I’m trying to make purchases. It happens immediately when I enter personal data. It’s as if I’ve not entered anything. I only use trusted sites. I’ve run my Internet security software and have checked for viruses. All is well there, at least I hope so.
I hope, too, that this additional information helps you help me. I so need it. Thanks much.

Multiple BW Instance question

Getting lost wading through the plethora of information available, so any direct pointers to information that directly addresses the following would be appreciated, in addition to any direct answers of course!
Consider a multiple BW instance, with a staging layer, and integration layer, and multiple analytic layers (one large one, and a couple smaller ones that operate at different service levels).
If we upgrade staging to 3.5, do all the rest have to tag along (staging feeds integration and one other, integration gets data from staging and feeds all the rest).
If we upgrade to 7.0, or whatever they are going to call it, will every system have to upgrade, or are the BW to BW connections backwardly compatable.
Major reason for considering this architecture is the ability to have a couple target BW's at higher or lower releases/service pack levels as warranted by the specific applications using them (e.g. SEM wanting SP's faster than the uber BW can test and apply them). However, if we have to keep all systems in synch, then this is NOT a viable option.
Mark Marty
EBIS Architect
Mckesson

This is based on some work being done by another member of the Terabyte club, and we have similar sized landscapes.
The key concerns are, with a single instance of BW, and ~ 10M rows of raw transactions migrating into the system each night (SD - BO, DD, SO's, MM, COPA, it all adds up), it is not clear to us that BW could handle all data rationalization, transformation and dissemination tasks. We have significant legacy transactions and master data that needs to be merged with a good portion of the R/3 data.
In our current environment, 90% of this is done outside of BW, using Datastage and a Data Provisioning Area. Even with sending only clean, merged, ready to load to target data, our load windows are increasing, and our backup window is scary.
This new effort is an attempt to separate key data needs so that certain things that need to be more responsive can be made available earlier. Additionally, this landscape is going to test out and prove or disprove the ability to do this volume of ETL wholly within a BW environment, rather than leveraging on other marketplace tools and techniques. Needless to say, this is a hot topic, internally we have a slant towards best in breed, and consultatively everyone wants it all to be the SAP suite of tools. Hence, we will build it and see.
Splitting Staging from Integration is not necessary (likely) from a purely technical need, however it has proven useful at another company, and we are going to explore it and determine the efficacy ourselves.

Multiple Machine Render question

Alright, so I just realized that After Effects (I'm running CS3) can utilize multiple machine renderings. At first, I thought this would be great since my typical renders are anywhere from 45 minutes to 2 hours. But, after much playing around, I realized that it only works for sequences.. which isn't much help because I export the majority of my work as DV Streams or MOV files! Is there any way I can get it to do formats other than image sequences or am I SOL?
I also considered buying a few moderate-end machines and putting together a small render farm in case I couldn't, but I wouldn't know where the best place is to start with something like that (I'd imagine determine what software works, but I can't find much info on that, really).

for PC's only =====
i wrote my own dos scripts to setup network rendering (remotely start after effects engines, copy projects to a watchfolder, and setup RenderControlFiles, copy and install fonts, etc ... took me a while to write and set up and is really the property of the company I work for), but the basics are below and from my in-house help file. Works better for us than collecting footage, basically, just substitute local drive volume names with UNC names, save the project, submit to the watchfolder, in its own directory, and add an RCF text file (try collecting footage, an RCF file will be generated so you can see whats in it). The thing that took me longest to debug was to install required fonts remotely ... any way read the basics
THE FOUR BASIC REQUIREMENTS
The basic requirements for any software that can network render, are that
(1)
all participating computers are able to access the original source footage,
(2)
any required fonts are loaded and active on the participating renderers,
(3)
any plugins and codecs used are also installed and available, and
(4)
all rendered frames, ie, output are send to a common storage area; single frames sequences are the best output format, a single streamed format, like an AVI, MPEG, or Quicktime Movie cannot be created by more than one computer at one time. However if your render queue has multiple single file streams queued, multiple render slaves can render the multiple queued streams, with one slave rendering one of the streams at a time two or more render slaves cannot render the same stream at the same time.
SETTING UP YOUR PROJECT TO NETWORK RENDER
Source Footage Paths
The first problem in the below example is that all the source footage is referenced using local paths. The default network rendering method Adobe use is really best suited to archiving, wherein the footage is collected from the source computer and copied to a common server in a hierarchial tree structure. In this example the source footage is comparatively short, but still over 900mb long, so there is a time issue involved, a network traffic issue, a storage issue at the server end, a server management issue, and if the network render fails, or needs to be redone, this step will need to be repeated or the process hacked by an appropriately skilled person.
To network render, all source imagery should use a file path that can be seen by other computers on a network. The best method is to use UNC (universal naming convention) paths, ie \\computername\sharedvolume\foldername\foldername\imagename.
In the above example a badly pathed file N:\TV1 Promos\sas\sas1.aif could be made legal by re-pathing to \\regan\zone2\TV1 Promos\sas\sas1.aif assuming that zone2 is an explicitly shared volume.
TIP: you can create as many share points as you want. You could, for example create an additional share point N:regan\one2\TV1 Promos\sas and call it SAS so it appears as the share \\regan\SAS. Just right-hand click on the folder you want to share, select SHARING from the menu, create the new share and give it a meaningful name; on XP systems, you also need to specify read/write access permissions.
You can create a shortcut to this or any other share, leave it on your desktop, and that will save you time navigating to that point or typing out \ \ r e g a n \ s a s
Alternatively, you can highlight a network path in explorer, copy that text, and keep pasting it when subsequently specifying paths.
There are not limitations on how many share points you can create.
An further alternative method would be to use the administrative share path, \\regan\N$\TV1 Promos\sas\sas1.aif. Here the drive letter N: is replaced by \\regan\N$. This method is particularly useful where the volumes are not explicitly shared.
One other method is to map shared volumes or folders to a drive letter, but for this to work, the drive mapping must be consistant across all participating renderers, so you would have to run around these computers mapping network shares to drives on a per job basis as required, so it is not at really very practical.
After Effects 6.5 introduced a smarter way if the project is opened on another computer on the network, it will attempt to replace the locally specified footage paths, with network paths. Mostly it works okay, sometimes it doesnt. Footage that is sourced from mapped network drives, for example where W: drive refers to \\Gfxserver2\graphics2, will have problems.
The best way is to use the UNC paths from the begining of the projects construction, then there is never an issue, and the project will always be portable, but if you forget or cant be bothered, or think that using network rather than local paths is slowing you down, ...
1) save your project,
2) open your project on another machine
3) reload one of the missing footage files ... the rest should fill themselves in, if they dont they are probably on another drive
4) check the output is network pathed
5) save the project, and submit that version to the render farm
Ultimately, for this project to network render successfully, the source footage needs to be completely specified in a manner where it is accessable by any machine on the network, so use must be made of
\\computername\VolumeLetterDollarSign\foldername\foldername\imagename, or
\\computername\sharedvolume\foldername\foldername\imagename, or
\\computername\sharedfolder\imagename methods.
Output Footage Paths and Render Settings
Once the source files have been amended to include a full network pathname, the parameters for the render can be set.
STEP ONE
In the Render Queue window, firstly choose a single frame Output Module, such as TARGA or JPEG; a single file streamed format, like an AVI, MPEG, or Quicktime Movie CAN NOT be created by more than one computer at one time. However if your render queue has multiple single file streams queued, multiple render slaves can render the multiple queued streams, with one slave rendering one of the streams at a time two or more render slaves cannot render the same stream at the same time.
STEP TWO
In the Render Settings, make sure you turn off storage overflow and turn on skip existing frames so that once any frames that have been network rendered, those frames will not be rendered again by another machine.
STEP THREE
The destination for the outputted animation should include the full network pathname, so that all the outputted files end a up in the same place.
Warning: If local paths are inadvertently used here the rendered files could be scattered over any local hard drive of the machines that will be rendering the animation, and each rendering machine would not be able to determine which frames had been rendered by other machines, so each machine could end up rendering the entire sequence itself, it the drive letter exists on that rendering machine.
Again it doesnt really matter which of the network naming methods is employed; either
\\computername\VolumeLetterDollarSign\foldername\foldername\imagename, or
\\computername\sharedvolume\foldername\foldername\imagename, or
\\computername\sharedfolder\imagename will work.
STEP FOUR
The project with its network pathed source and output files specified, and render queue setup would then be saved.

Multiple TOCs Security Question

Hello,
Just getting started with RH7. I'm building a project with
approx. 30 TOCs and will be limiting access to them for multiple
user types for a software application. I had a question from the
tech group and am wondering if someone can help. Forgive me if this
seems like a 'duh' question... just not thinking about this
straight. The tech guys are concerned that if we publish multiple
TOCs that they then integrate into each of the user groups for the
app, security from one group to another might be an issue. The
system is educational and the concern is that students might be
able to get their hands on the help files since they sit on the
server. Again - new at this and want to know if anyone has
encountered this or if there is something that I can tell them to
help them wrap their minds around what is actually produced when
webhelp is published so that they can build in the proper security.
As a further note, each user group enters a password protected
area.
Thanks so much for not laughing and for helping!

Hi PeggyUF and welcome to our community
Wow, 30 TOCs? I'm unclear on exactly how you will be limiting
access. Are you building 30 different versions of your help? That's
the only way I can fathom using 30 different TOCs. You certainly
can't do it by publishing a single WebHelp to a common area. You
would need to generate WebHelp 30 different times to 30 different
folders. Then publish each output folder to a corresponding server
folder. Then restrict each user to only seeing their assigned
folder.
Hopefully that helps... Rick

Multiple Database Servers Question

Hi,
Please forgive this ignorant question, but can someone tell
me how one would go about using multiple database servers?
Just as there comes a time where one would need more than
one web server and would need to use a load balancing
solution, what happens when one would need more than one
Database Server?
How does one go about implementing that solution?
Is there some way to have two database servers carrying the
same information with some kind of load balancing solution
in front of it(?) or does one place some tables on one
Database
server, and other tables on the other database server?
(I have no clue as to how things would work.)
Thanks in advance,
Joe

Microsoft SQL allows for clustering of SQL databases, so for
instance two servers connected to a fileshare and a virtual address
shared across the two physical boxes. Database connections are made
to the virtual addres which will then be handled by the active
node. Becuase a database is ultimately a file(s) on a disk it can
only be attached to one node at a time so you end up with an
active/inactive cluster.

Multiple-jar applet question

Here's a basic question that none of the examples seem to address. If my applet is comprised of multiple jars (some dynamically loaded based on system configuration), do they all have to be signed, or does just the jar file containing the applet entry point need to be signed?
Conversely, could it be that only the jar files that contain code that wants to write files to the local file system need to be signed, or does everything need to be signed?

Conversely, could it be that only the jar files that contain code that wants to write files to
the local file system need to be signedThe Stack needs to be "trusted" code. If an unsigned applet "not trusted" calls a method
of the signed applet it should not be allowed to do "trusted" things.
One example is when you call a public method of the applet from javascript. There is a
sollution other that signing all.
http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
second post

Multiple AP Managers Question

Hi,
I've got a question concerning the configuration of multiple AP manager interfaces on -for example- a cisco WLC 2504. I've read the configuration guide but I'm not sure whether this is the way the protocol works. Say I want to distribute AP's (and traffic) across various AP Manager interfaces on the WLC. I would configure the following:
Create one management interface (which will automatically also be an AP-Manager interface)
Configure 1 (or more) Seperate ap-manager interfaces, assign them to a port number, and select "Enable dynamic AP Management". VLAN ID's will be the same.
Create a WLAN and configure it's interface to "management"
Is it correct if I state that the LWAPP protocol takes care of the discovery from the Access Point and sends information about the available AP-manager interfaces back to the AP and the AP knows which ap-manager interfaces are available, connecting to the least loaded one?
Thanks in advance for your time.

The AP manager communicates with the AP's using CAPWAP. The use for multiple AP managers to me doesn't make sense to do especially since its a 2504. I have always just used the management interface for AP management and assign a primary and backup port. You can do it the way you have stated, but what is the benefit. I have seen 5508's deployed using only one gigabit port and over 250 AP's and they had no problem.
Thanks,
Scott Fella
Sent from my iPhone

Multiple Image Uploading Question

Please forgive my ignorance here but I saw the question on multiple image uploading and this is something i have been trying to do for a few days now without any success.
I am using CS3 with ADDT and PHP
I want to allow my users to be able to upload say 5 pictures at a time, each user has multiple photo albums the names of which are stored in mysql table, the image name is stored in a different table with a reference to the album id.
So, I assume that i put an insert record on the page, I followed the usual process used to have a single image upload and thought it would give me or add the extra file field options on the form when telling the multi upload to allow 5 images to be uploaded, not the case. Do i have to create a form on the page first with 5 file fields or am i just missing the plot here.
Sorry if this is just something that seems simple but i just don't seem to be able to get it to work at all. I have no working example to look over and have serach google to see if there are any tutorials for doing this but can't find any at all.
Thank you in advance of any help and guidance given
Regards
Ray

Hi Günter
Thank you for your reply and also for the great tutorial site you run which has helped me quite a lot with several things.
ok, so i am maybe a little confused here, so what is the multiple image uploader for if not for uploading multiple images, and how does it give you the option to select more than one file or is it that you can't use it when inserting the image file into a database?
Please forgive my ignornace again, i can see when i have tried using the multiple image upload thatit puts a text link called upload, what is that for because it doesn't seem to do anything on the page i have tried it on?
Kind Regards
Ray

Multiple slashes additional question

Similar Messages

Maybe you are looking for