Multiple sources to a single table

Hi,
I have two seperate target tables from two seperate mappings. I need to determine the row count from the two tables and feed it in a seperate mapping to a single target table as two seperate attributes. My several attempts have resulted in the error "Attributes flowing into target table have different data sources". Is there someone in this forum that could recommend some solution to this. Any help would be greatly appreciated.
thanks in advance

Hi,
there are several variants:
1) insert your target table into mapping twice
2) use UNION ALL (Set operator)
Oleg

Similar Messages

Why do we create multiple aliases to a single table?

<h4>{color:#0000ff}Hi,{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff} Why do we create multiple aliases to a single table in the same query?{color}</h4>
<h4></h4>
<h4></h4>
<h4>{color:#0000ff}{color:#000000}For Ex: {color}{color}</h4>
<h4>
{color:#000000}select name,address,phone, from emp e, emp e1{color}</h4>
<h4></h4>
<h4>{color:#000000}where e.empid = e1.empid;{color}</h4>
<h4>
{color:#0000ff}ofcourse the above query's where condition is not correct, but i am giving as an example only{color}</h4>
<h4>{color:#0000ff}I have seen similar kind of queries where a single table name is aliased 10 times in the same query{color}</h4>
<h4>{color:#0000ff}can someone help me to understand the logic behind it?{color}</h4>
<h4>{color:#0000ff}Thanks in advance{color}</h4>
<h4>{color:#0000ff}greddy.{color}</h4>
Edited by: greddy on Oct 24, 2008 2:46 AM

Hi,
When you say
FROM    emp e
,       emp e1you are using two copies of the same table.
Can you imagine using two copies of the same book at the same time?
Say you see a word (like "hyrax") that you don't know. You might look up that word in the dictionary.
The English sentence "Open the dictionary to the page containing the new word." is like this SQL query:
FROM    dictionary
WHERE   :unknown_word BETWEEN low_guide_word and high_guide_wordWhat if you saw that word while reading a book (let's call it book_a).
You might want to leave book_a open, and place the dictionary beside book_a, so you can easily compare how the word is used in book_a with the definition in the dictionary.
This corresponds to joining two tables in SQL:
FROM    book_a
JOIN    dictionary ON unknown_word BETWEEN low_guide_word AND high_guide_word
WHERE   book_a.page = whatever -- NOTE: both tables have a column called pageor you can use aliases for one or both of the tables
FROM    book_a      a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNow, imagine that book_a is itself the dictionary. Say you saw the word "hyrax" while you were looking up another word, "ibex".
You can do a side-by-side comparison, as above, if you have two copies of the dictionary. Leave one copy open to "ibex", and open the other copy to "hyrax".
This corresponds to a self-join in SQL:
FROM    dictionary a
JOIN    dictionary d ON a.unknown_word BETWEEN d.low_guide_word AND d.high_guide_word
WHERE   a.page = whatever -- NOTE: both tables have a column called pageNotice that this last bit of code is identical to the previous one, except that book_a is replaced with dictionary.
In this case, you must you a table alias, at least for one copy. It wouldn't make any sense to say "Leave the dictionary open to "ibex" and open the dictionary to "hyrax". You have to have some unique way of referring to each copy, such as "Leave the dictionary on my left open to "ibex" and open the dictionary on my right to "hyrax"."

Extract Multiple Rows from a Single Table into a Single Row in a New Table

I have a table in a database that contains contact data like name, address, phone number, etc.
The folks who designed the database and wrote the application wrote it so that all contact records are placed in that table, regardless of contact type. In fact, the contacts table does not even have a column for "type" even though there are many
different types of contacts present in that table.
I am trying to write a mail merge style report in SRSS, that gets sent to a specific type of contact, based on criteria provided that must be obtained from another table, and that data is then used to get back to a specific set of contacts from the contacts
table.
The attached file directly below describes my problem and all related information in an extremely detailed way.
SRSSMailMergeIssue.pdf
Unless there is a way to make a SRSS Tablix point to two different data sets in SRSS, it looks like I have to combine multiple rows from the same table into a new table.
If anyone can review the details in the attached pdf file and possibly point me in the direction I need to run to solve this probelm, I would greatly appreciate it.
I also included a document (below) that shows the tables I reference in the probelm description.
dbtables.pdf

I found a solution.... and posted it below
select
dk.ucm_docketnumber [UCM DocketNumber],
dk.ucm_docketid [UCM DocketID],
vc.FirstName [Victim FirstName],
vc.MiddleName [Victim MiddleName],
vc.LastName [Victim LastName],
vc.Suffix [Victim Suffix],
vc.Address1_Line1 [Victim AddressLine1],
vc.Address1_Line2 [Victim AddressLine2],
vc.Address1_Line3 [Victim AddressLine3],
vc.Address1_City [Victim City],
vc.Address1_StateOrProvince [Victim StateProvince],
vc.Address1_PostalCode [Victim Postalcode],
oc.FirstName [Offender FirstName],
oc.MiddleName [Offender MiddleName],
oc.LastName [Offender LastName],
oc.Suffix [Offender Suffix],
oc.Address1_Line1 [Offender AddressLine1],
oc.Address1_Line2 [Offender AddressLine2],
oc.Address1_Line3 [Offender AddressLine3],
oc.Address1_City [Offender City],
oc.Address1_StateOrProvince [Offender StateProvince],
oc.Address1_PostalCode [Offender Postalcode],
pc.FirstName [Arresting Officer FirstName],
pc.MiddleName [Arresting Officer MiddleName],
pc.LastName [Arresting Officer LastName],
pc.Address1_Line1 [Arresting Officer AddressLine1],
pc.Address1_Line2 [Arresting Officer AddressLine2],
pc.Address1_Line3 [Arresting Officer AddressLine3],
pc.Address1_City [Arresting Officer City],
pc.Address1_StateOrProvince [Arresting Officer StateProvince],
pc.Address1_PostalCode [Arresting Officer Postalcode]
FROM ucm_docket dk
left outer join ucm_victim v on dk.ucm_docketid = v.ucm_docketnumber
left outer join contact vc on vc.contactid = v.ucm_victimlookup
left outer join ucm_offender o on o.ucm_offenderid = dk.ucm_offenderlookup
left outer join contact oc on oc.contactid = o.ucm_individualid
left outer join contact pc on pc.contactid = dk.ucm_ArrestingOfficerLookup
WHERE (dk.ucm_docketnumber = @DocketNUM)

Multiple Source Structure in single flatfile using lsmw idoc method

Hi Abapers,
we have a requirement for Business partner Data mIgration into CRM system using LSMW idoc method,I got a flat file
which has multiple source structures like(header structure,Tax structure,Mailstructure,Identification structure,bankdetails structure,card strcuture........etc of 12 structures) with identification for each structure. can any one help me how to handle this in lsmw or any link of this kind of scenario will be helpful for me .
Thanks and Regards,

Hi Saeed,
For example if you want t create bom through lsmw then we will *** two files one header and other item one.In the same way .In lsmw start by keeping the idoc method i will only propose at second step how many files it need. Just map the idoc and see. Post if need more help.
Regards,
Madhu.

Multiple sources in a single Connection Pool

Hi Folks,
I have a requirement to import data from two diffrent data sources( for example : Two diffrent database of Oracle in two diffrent servers) using a single connection pool to the physical layers of OBIEE RPD. Can anyone please suggest whether this is possible or not? If yes please provide the steps.

DB Links is an Oracle feature, not an OBIEE. You have to create your DB link in one of the schemas in DB1 so you can connect from there to DB2. Then you can simply create a query that joins data from both DBs:
SELECT * FROM DUAL d1, DUAL@DB2 d2
WHERE d1.dummy = d2.dummy
Search on Google as this is a very popular and simple feature to use. It will allow you to use one connection pool that's connection to two DBs.

Mapping Multiple Source fields to Single Target Fields with differnt Values

Hello Friends,
I am having a senario where I have to mapped multiple fileds from source str. to same Idoc Fields with ( differnt default values )
E.g Source Str.
- ShopNO
- OrderTyp
Has to mapped to Idoc Str E1EDK14-Orgid.
E.g Mapping:
So when ShopNo will mapped to E1EDK14-Orgid the default value should be "MOP" & E1EDK14-Qualf should be 019
and when OrderType will be mapped to E1EDK14-Orgid the default value should be "STD" & E1EDK14-Qualf should be 012
So I tried of using node "UseOneAsMany".....but there I cant define the vaule of field orgid, and seconly how to specify the values of field Qualf?
Do i need to write my own specify function ? or I can sovle this issue using standard avaiable functions ?
Regards,

Hi Ravi,
Thanks for your reply....
I am facing following problem... when I try to duplicate the segment and do mapping....... and then when I save, I got following error msg:
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KSCHL. Skipping mapping
Target structure has no such path: /ZARVO_ORD/IDOC/E1EDK05[1]/KRATE. Skipping mapping
Any suggestion ?
in other words, when I do duplicate it creates me the segment, but when I save it, it gets disappered .........
Regards,
Edited by: Shah H on Oct 26, 2009 3:17 PM

Multiple source values to single target in value mapping

Hi Experts,
I have to acheive below thing using value mapping.
Source                        Target
ABC                            111
CBA                            111
XYZ                             222
ZYX                             222
When I am trying to do this in ID, It is not allowing me.
Is there a way to do this?
Regards,
Prasad

Source            Target
ABC               111
CBA               111
XYZ               222
ZYX               222
For the above source and target you have to create 2 value mapping groups.
In more detail I want to say is,
1. Just create your value mapping by using Source & target Agency & Schema.
2. Create your first value mapping group which will return the traget value as '111'.
3. Create your second value mapping group within the same Agency & Schema which will return you '222'.
While creating it If get any warning just ignore it..
Note: You can add multiple value mapping groups if you have different outputs for different sources.
Regards,
Sarvesh

Multiple rows in a single table cell - Adobe forms

Dear All
I am developing an adobe form which conatins a table alongwith other screen/ form elements.
This table is bound to a data node and contains only two columns. Number of rows will be determined at run time.
Each cell of the table will contain three rows seperated by a space in between them. Please refer to the diagram below for more understanding.
Yes
ABC
No
PQR
Not Known
XYZ
I have no idea how to achieve this. Can anyone help?
Regards
Vineet Vikram

Hi,
Here are the steps how you can do it.
1. Create a table.
2. In the Library palette, click the Standard category and drag the Table object into a cell in the main table.
Note: If you selected Donu2019t Show This Again in the Insert Table dialog box, when you select the Table object from the Library palette, LiveCycle Designer automatically inserts a table with the same number of columns and rows that you inserted the last time you used the Insert Table dialog box.
3. In the Insert Table dialog box, enter the number of columns and rows. You can enter a maximum of 20 columns and 50 rows. You can add more columns and rows after the table is created by using the Insert commands on the Table menu.
4. To add a header row, select Include Header Row In Table.
5. To add a footer row, select the Include Footer Row In Table.
6. Click OK.
Regards
Runal

How to map multiple source structures to single target structure

Hi all,
I have the scenario of 2 input files so i am using BPM for it. I have created the message types of the 3 input files. I have to finally generate an XML file which will contain the data of all the 2 files. That is i have to do 3:1 mapping.
Source Structure of File 1:
<b>DT_PWC_Customer</b>
<i>RECORDSET</i>
<u>CUSTOMER</u>
   <i><b>REF_NO</b></i>
   <i><b>CUSTOMER_NO</b></i>
Source Structure of File 2:
<b>DT_PWC_Customer</b>
<i>RECORDSET</i>
<u>METER</u>
   <i><b>REF_NO
   METER_NO</b></i>
Target Structure of Final Output File:
<b>DT_PWC_CustomerMeterData</b>
<i>RECORDSET</i>
<u>CUSTOMER_METER</u>
   <i><b>REF_NO
   CUSTOMER_NO
   METER_NO</b></i>
Above nodes i have shown in a heirarchical order..nodes with same indentation are at same level.
Can anybody tell me how to do this mapping in IR in graphical editor.
RAJEEV GUPTA

Hi,
To elaborate my requirement, I want to tell that since i will be having 2 input files- one for Customer & one for Meter. I want to finally generate one XML file which will have data from both these 2 input files. That is, if Customer file has 3 records(3 REF_NO, 3 CUSTOMER_NO) and Meter file has 4 records(4 REF_NO, 4 METER_NO), the final output XML file will   have 7 records(7 REF_NO, 3 CUSTOMER_NO,4 METER_NO).
Thanks,
Rajeev Gupta

Multiple hierarchy levels from single table

Happy 2014 for everyone!
Here is my first problem of the year: I got a product table with "coded" hierarchy, like this:
1
Level
11
Level
111
Level
1111
Level
11111
Product
11112
Product
11113
Product
1112
Level
11121
Product
112
Level
1121
Level
11211
Level
112111
Product
112112
Product
112113
Product
How should I go about to create an hierarchy from this table? Keeping in mind that products could be in different levels.
Any ideas please?
Thanks very much!

I think you can model this as a parent-child hierarchy. More info here: http://technet.microsoft.com/en-us/library/ms174846.aspx
If you are using multidimensional: http://www.brustblog.com/archive/2008/06/22/analysis-services-2008-wizards-is-the-magic-gone.aspx
If you are using tabular: http://sqlblog.com/blogs/alberto_ferrari/archive/2011/07/19/parent-child-hierarchies-in-tabular-with-denali.aspx
Christian Wade
http://christianwade.wordpress.com/
Please mark correct responses as answers!

Issue-Mapping Multiple Source Occurence to Single Target Occurence

Hi Gurus,
I have a requirement where the source has occurence 0 to 4 where as the target has occurence 1 to 1 .
Let the source segment be S where the child elements for S are S1 and S2 .
S1 takes the values 1 , 2 & 3 .
S2 takes the values X , Y & Z .
I need to map S2 to target field T1 if and only if S1 has the value "2" .
How can we achieve this ? I tried using the node functions but couldn't achive as i want the 2nd value of S2 from the given set of values ( X , Y & Z ) .
Please help me out in this issue.
Thanks in advance .
Regards,
Sarat

Hi,
You can use this mapping:
S1 --> removeContext --> equalsS --> ifWithoutElse --> removeContext (used to remove suppressed values) --> T1
constant: 2 -
> / ____________/
S2 > removeContext--
> /
Hope this helps,
Edited by: Mark Dihiansan on Nov 11, 2009 1:44 PM

Streams configuration multiple source-single destination

hi all,
can we configure streams capturing changes from multiple source databases and applying at single destination?
to configure table level replication is it mandatory to enable suppliment logging foe enrire database?
is it possible to configure streams without setting GLOABAL_NAMES parameter to TURE.?
if i enable table level suppliment logging ,will my dependent objects on the table go invalid?
there may be some silly questions,PLease answer my questions.
regards
Sangeeth

>
can we configure streams capturing changes from multiple source databases and applying at single destination?yes you can, just should care about conflict resolution when multiple source tables are replicated into the same destination table.
to configure table level replication is it mandatory to enable suppliment logging foe enrire database?no, you can have it for specific tables, which are replicated.
is it possible to configure streams without setting GLOABAL_NAMES parameter to TURE.?yes, you can, but it's error-prone and will be every time pointed by Oracle Support in case of any streams problems.
if i enable table level suppliment logging ,will my dependent objects on the table go invalid?why? I didn't catch it.

Open Hub - Data from multiple sources to single target

Hello,
I am using Open Hub to send the data from SAP BI to Flat files. I have a requirement where I want to create a single destination from multiple sources. In other words in BI we have different tables for attributes and text. I would like to combine the data from attributes and text into a single file. For eg. I want to have material attributes and text in the same single file as output.
Is this possible in Open Hub? If yes could you please help me to understand the process.
Thanks,
KK

Hi,
1. Create the Info Spoke and activate it
2. Change it and go to transformation
3. Check the box InfoSpoke with Transf. Using BAdI
4. You are asked if you want to generate the spoke. Say yes & Simply set some texts and activate here, then return.
5. You can now change the target structure. Simply create a Z structure with all the attributs & text field in it in the SE11 and enter it here.
6. Double click on BAdI implementation & then double click again on "TRANSFORM" method of the implementation. It will take you to method
"IF_EX_OPENHUB_TRANSFORM~TRANSFORM"
7. Write a code to select & fill the text field & map other filed with the attribute fields.
Example:
ZEMPLOYEE_ATTR_STRU - Target Structure for InfoSpoke EMPLOYEE_ATTR
EMPLOYEE     /BI0/OIEMPLOYEE     NUMC     8     0     Employee
DATETO     /BI0/OIDATETO     DATS     8     0     Valid to
DATEFROM     /BI0/OIDATEFROM     DATS     8     0     Valid from
COMP_CODE     /BI0/OICOMP_CODE     CHAR     4     0     Company code
CO_MST_AR     /BI0/OICO_MST_AR     CHAR     4     0     Controlling Area of Master Cost Center
HRPOSITION     /BI0/OIHRPOSITION     NUMC     8     0     Position
MAST_CCTR     /BI0/OIMAST_CCTR     CHAR     10     0     Master Cost Center
TXTMD     RSTXTMD     CHAR     40     0     Medium description
Note: Text and attribute are in same structure.

Numbers: Copy/Paste from multiple tables into 1 single Table?

I would appreciate some guidance in creating a copy/paste script from multiple numbers tables into a different single table within the same numbers document.
The columns in the source table are in different positions to the destination table.
So for example, i would want to copy…
Sheet 1, Table 1 Cell A3 copy to Sheet 2 Table Z Cell B2
Sheet 1, Table 1 Cell B3 copy to Sheet 2 Table Z Cell C2
Sheet 1, Table 1 Cell C3 copy to Sheet 2 Table Z Cell E2
Sheet 1, Table 1 Cell D3 copy to Sheet 2 Table Z Cell F2
Sheet 1, Table 1 Cell E3 copy to Sheet 2 Table Z Cell G2
Sheet 1, Table 1 Cell G3 copy to Sheet 2 Table Z Cell I2
Sheet 1, Table 1 Cell J3 copy to Sheet 2 Table Z Cell H2
and repeat the copy/paste on subsequent rows of each table until there is an empty row in Sheet 1 Table 1 (or if this is difficult, say set the repeat to a max of 30 rows).
The script would then need to move on to Sheet 1 Table 2, and do the same copying to Sheet 2 Table Z (from where the previous copy/paste finished in Table Z).
Repeat process would finalise with Sheet 1 Table 6.
The Paste part would need to be pasting values, as the cells in the source tables do contain some formulas.
At the moment this is all done manually and does take some to to undertake.
If anyone can help, i would be very grateful.
Thanks,
Colin

Interceptor,
are you trying to aggregate data from severl tables into a single table? If so you whould be able to do this without a script. The function indirect() will allow you to construct the proper formula, which you may fill over (in the same row) to the appropriate cells, then fill down.
Here is a small example:
There are three data tables ("Table 1", "Table 2", and "Table 3"). And a summary "Table Z"
In table Z make the first row a header (as shown):
Use column A to enter the Sheet name and colomn B to enter the table name.
In row 1 (the header), enter the cells you want to get
in cell C2 type (or copy and paste from here) the formula:
=INDIRECT($A2&"::"&$B2&"::"&C$1)
now select cell C2, copy now select cell C2 thru H2, paste
now select the cells C2 thu H2, hover the corsor over the bottom edge of the selection, and drag the yellow cirlc down as needed to fill the formula down.
Update the sheet and table names as needed for each row

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Multiple sources to a single table

Similar Messages

Maybe you are looking for