Multiple Systems Pointing to One WFM Farm

I am attempting to hook a second SharePoint farm into my one Workflow Manager 1.0 farm. My first farm registered just fine. Now I am attempting to tell a second SharePoint farm to register and I get the following message:
Register-SPWorkflowService : An existing scope named "SharePoint" already
exists in the workflow server. Use the -Force parameter to overwrite the
existing scope. When using -Force, if another SharePoint farm was registered
using this scope, that farm may not be able to continue working with the
workflow server unless re-registered under another scope name.
At line:1 char:1
If I overwrite the existing scope named "SharePoint", will that break the WFM connection from my first SharePoint farm?
Is it possible to have multiple SharePoint farms using just one Enterprise WFM Farm?
Thanks

Thought I would answer this thread in case anybody else was looking.
http://www.wictorwilen.se/sharing-a-workflow-manager-1.0-farm-between-multiple-sharepoint-2013-farms

Similar Messages

Multiple click points for one button and movie clip

I am trying to make a single button into a multiple click
point. I have a movie clip on the stage and I have an invisible
button over it. The movie clip consists of a single timeline that
has an ambient animation running and looping intially. I have three
more labeled sections of that timeline that each contain a
different animated sequence as click point animations for that
movie clip. I want the user to click on the button on the stage and
the first labeled click point animation of that movie clip will
play. I want that action to be stored so that when the user clicks
again then the second labeled click point animation will play then
they will click for the third in the same way. In between user
clicks I want the ambient animation loop in the beginning of that
movie clip timeline to play. When the user has clicked the 3rd and
last animated sequence then the whole thing will reset and be
available again. Can anyone let me know how that can be
accomplished. I originally scripted it through tell target to play
the first but I don't know how to move forward. Thanks!

What version of Flash are you using? Telltarget is very
old... try something like this:
// array of the animations
myAnims = ['firstAnim','secondAnim','thirdAnim']; // these
are also frame labels
// your current animation index in the array, arrays start at
0,
// so we start at -1 which is like before anything
currAnim = -1;
// function to play the next animation
function nextAnim(){
// add one to the current animation index
currAnim++;
// if you've reached the end of the array, start back at 0
if(currAnim >= myAnims.length)currAnim = 0;
// now tell the MovieClip to play based on the value of the
current array index
myMovieClip.gotoAndPlay(myAnims[currAnim]);
Then on the button you just put:
on(release){
nextAnim();
And at the end of each animation on the timeline, put:
gotoAndPlay(1);
And at the end of the ambient loop at the beginning I guess
you have that, too, so it loops.
Hope that helps

Multiple domains pointing to one domain. How best for SEO?

I'm a therapist. I have just created a site eg mytherpaystudio.com I own several domains (currently as individual websites) ie thistherapy.com, thattherapy.com and anothertherapy.com etc. I think I made a big mistake when I created these websites because they are basically clones of each other, which I have learned through reading Google webmaster info etc may well have created SEO problems ie penalised me. I'm revamping the whole thing because I have a new therapy studio - massage, counselling, movement therpist etc
Would I be best:
Deleting the whole content and just pointing the domain name to the therapystudio.com site, or
Only leaving content on the websitess which only pertains to the theraspy type ie thistherapy information, othertherapy information and using hyperlinks and text links to the mytherapystudio site?, or
Anyone have another suggestion altogether
Obviously I want the best possible seo outcome. I've stuck with iweb. I use RAGE iweb seo tool and sitemap automator.
Thanks in advance for help

I am a therapist as well and from my own experiences, I think you might be better forwarding the other domain names to the new therapy centre website.
I did the same as you at one time, thinking that more sites might be better, but then decided that I would be better cutting down, so I tried a little re-branding of my practice and purchased a new domain name and just have 2 websites that advertise what I am doing - namely Structural Integration/Rolfing and Orthopaedic/Sports Massage and Rossiter System.
I have to say though that when I re-designed the 2 websites, I ditched iWeb and one site I re-built using EverWeb (http://www.everwebapp.com), which is a good alternative to the now unsupported iWeb and for the other site I used Joomla, which is one of the Content Management Systems.
The more sites and domain names you have, you more you have to get found, but I then found that I was losing track of what I did have. As well as my now 2 websites and domain names I also make use of the free website building facilities by using WordPress.com, where you can set up a free website and publish to the WordPress severs and sometimes Wix - in this respect, the more you have the more you will be found.
Good luck with it.

Multiple systems backups to one Volume

Hi all folks,
a question only, today I use one volume (external FW Drive) to backup some macs too, but I think this is a bad idea? It seems to be, the only limit for the used backup space is the space available on the volume.
Also my question, is it recommended to backup each system to a single volume or disc image?
Thanks for any help,
Lutz

You'd be much better off to use one partition for each Mac's backups. That way, each will have it's own, individual space limits, and if you ever want or need to erase all of one Mac's backups and start over from scratch, all you have to do is erase the partition.

Multiple webgates pointing to one access gate entry in OAM

Can we install webgates on multiple boxes and point to same access gate entry in OAM.
Are there any issues with this kind of configuration?
Any opinion?

Hi,
It is technically possible to do this, and makes sense when all the WebGates are logically the same (for example, they all reside on instances of load balanced web servers).
When the WebGates reside on logically different web servers, then it will be more difficult to have different policies protecting similarly named resources on the different web server. For example,eg you may want to protect /admin differently on the different web servers, and you will not be able to use Preferred HTTP Host to achieve this when they share the same AccessGate definition. Also, you will not be able to set different timeouts on the different WebGates, or have different settings for such things as IPValidation or cookie domains.
Regards,
Colin

Multiple Shipping Point in One Plant

Hello.
How to decide if we create another shipping point or not.
We have two warehouses, located far from each other.
The design is to have just one plant, and create two storage locations.
Should I make two shipping points for each warehouse and assign to just one plant?
Share you ideas...
Thank you,

Dear Deriada Gemma
Shipping point requirement is based on physical locations from which shipment is done, in case you are using Logistic execution then based on shipping point shippings will be done.
If you have two wh and want to create seperate deliveries for both wh use two seperate shipping points
you can automatically determine based on plant, loading group and shipping condtion.
from help you will find few other reason for which seperate shipping point decision can be made
list list, printing ...etc
Define, copy, delete, check shipping point
In this step, you define the shipping points in your company or edit
    shipping points that already exist. In order to adapt the functional
    scope of a shipping point to the organization in your company, you
    should process the following check list:
o   The shipping point is the top level in the organization for
        shipping.
o   A shipping point can be allocated to several plants.
o   A shipping point can be divided into several loading points.
o   A delivery is always initiated from exactly one shipping point.
        Thus, all items of a delivery belong to one shipping point. Groups
        of deliveries also belong to exactly one shipping point.
o   You can influence delivery scheduling via allocation to departure
        zones.
o   The shipping point can be proposed automatically during order
        processing depending on the plant, loading group and shipping
        condition.
o   A shipping point has an address.
o   The shipping point is used as a selection criterion for lists of
        deliveries and the work list deliveries.
o   The shipping point is used as a selection criterion for processing
        deliveries like printing, picking or goods issue.
o   You can determine the printer destination for messages differently
        for every shipping point on account of shipping documents.
Regards
Jitesh

Multiple System identifiers for one EDI Party

Hi,
I'm getting a problem when trying to send an IDoc to another R/3 system. I did the first tests with our SandBox and everything was working perfectly. Now, I'm trying to do the same tests against our QAT server.
So first, I have created all the new entries under the party identifiers. Then, new Business Service, receiver determination ... and finally the sender agreement.
So, now the file is getting picked up but I get this error:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_PARTY</SAP:Code>
<SAP:P1>http://sap.com/xi/XI</SAP:P1>
<SAP:P2>XIParty</SAP:P2>
<SAP:P3>Tech_Data</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender XI party http://sap.com/xi/XI/XIParty/Tech_Data to an IDoc partner</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Seems the new identifiers for QAT is not piked up?!? Do I need to do something else if I have multiple identifiers?
Rgds,
Yves

Hi Yves,
In the "Indentifier" section of your party definition for the EDI Party
Change the following:
AGENCY = Change the Business System from SBX to QAT
Scheme = Remains the same
Name   = Change the SBX Partner Number to QAT
         Partner Number(same as QAT Partner Number
         in R/3 Partner Profile)
Idoc Receiver CC for QAT
1) In the "parameters" tab, check the option "Apply Control Record Values from Payload"
2) In the "Identifiers" tab,
   Enter the BS for QAT in "Sender Agency"
   Enter the Scheme for QAT "ALE#<partner role>#<partner function>"(same as in
   the identifiers tab of the EDI party definition)
   Enter the BS for QAT in "Receiver Agency"
   Enter the Schem for QAt as "ALE#LS"
It should work with these changes.
Rgds,
Sam Raju

Creation of multiple inspection points

Hello experts,
I try to figure out how to create multiple inspection points for one operation at process order release.
It means that the release of the process order triggers:
- inspection lot creation (lot origin 03)
- inspection points creation for operation with inspection characteristics assigned to it
In the recipe header, I entered inspection points = 150 - generated inspection point, qty or time
(module function QAPP_CUST_IP_CREATE is activated for "automatic creation of insp. points")
In the operation header, I select time related -and enter 1 HR
However no inspection point is created at process order release. Only inspection point identifier is created automatically when I select the next inspection point in TR QE51N.
Do you have any tips on the subject ?
Thanks in advance
Best regards
Amaury

Dear Amuary
Doubt if there is any solution in standard. Use exit so that thr first 3 inspection points gets activated quickly. Try these exits
QAPP0001
User exit QAPP 1 (create inspection point)
| QAPP0002 |User exit QAPP 2 (create inspection point & other data)
Regards
Gajesh

Multiple receiving points for BPEL

Can we bind one BPEL to multiple Adapters, for e.g. File and JMS adapters calls the same BPEL as well as we should be able to send SOAP messages from a SOAP client to the same BPEL? (Multiple receiving points for one BPEL)
here is what i need to do
To create an adapter we create an partner link and bind that partner link with the "receive activity", as I understand we can bind only one partner link with "receive activity", but if I create a "file adapter" partner link and a "JMS adapter" partner link, how do I bind both of them with "receive activity"? so i dont need to write a seperate BPEL for each adapter.

I have a similar problem but the tutorial does not solve my problem and I think it does not solve the jms and file process either.
I want to have a process to receive a message, do things and then receive another message. The difference with the tutorial is that in the tutorial the Buyer is called, it calls to the seller and gets the response. In my case (and in the jms and file example), we wanto to get to receive the second time without invoking first to a process.
(In my case the client is the same, but need to send two messages, in the first message ask for a operation and gets an Id. In the second message it sends the Id to confirm the operation. I could do that with two processes, but I prefer to do it with one process if possible. I am trying to use the Id to correlate the second receive).
I am using correlations set and two roles for the process entry point (one for the first receive in the process and another for the second receive in the middle). But in the second role, when I see the generated WSDL from the console, the endpoint is something like http://set.by.caller, instead of a real endpoint.
How can the second client call my process ? what endpoint should it be using ?
Can a process expose two endpoints to be called ? How ?
Thanks.

Multiple Industry Solutions in One System

Hi,
Could anybody please confirm if multiple Industry Solutions can be turned on within a single SAP instance (e.g. CPG and Life Sciences)?
Thanks in Advance.
Regards,
Mahendra
Edited by: Mahendra Parachuri on Mar 28, 2009 4:06 AM

Hi,
Please click [Multiple Industry Solutions in One System|http://www.entegreat.com/eg_industrysolutions_casestudies_foodandcpg_mde.htm] for your reference.
With Regards,
Krishna.

'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies

Dear Experts
I am currently facing an issue when I want to connected multiple PI instances to one ECC client for
ABAP Proxy purposes.
In transaction 'SPROXY', in the Enterprise Service Brower, only one PI instance is shown and accessable.
Can this setting be changed to allow multiple PI systems in this Enterprise Service Browser?
Thanks for your ideas.
Mathias

Hi,
Check these replies.
R/3 connected to multiple XI instances
'SPROXY' - Multiple PI Systems connected to one ECC System for ABAP Proxies
Multiple XI Instances
Multiple XI instances or multiple app server
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 4, 2008 11:43 AM

Different System Alias in one iView

Hi all,
I have an ESS/MSS Szenario based on EP7 SP13 and HCM (ECC 6). I have setup the business package and all is working fine. I have setup the different System Aliases like SAP_R3_HumanResources and SAP_R3_HumanResources_Meta etc. and I have a working Single Sign On between my Portal and the HCM system.
I now face the challenge to change one link within the working time iView to point to a different system than all the others!
Let me explain: I have a second ERP 6 system that provides for the actual working time Web Dynpro and this Dynpro is not provided by the HCM system. I think I need to change the target for this one Dynpro to point to the ERP instead of the HCM system while all the other links in the working time iView still have to point to the HCM system!
I have no idea whatsoever, how to do this. I checked the PCD but I can't seem to find the right place where to adapt the System Alias for an iView at all. Can someone point me in the right direction?
Kind regards,
Christian

No you're not
In fact you lack the System and System alias that point to you're new ERP 6.
Here a link with a demo that explain how to create the system and define its alias : [demo|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24d8faf9-0701-0010-c99c-aabbdb7e95f4] .
Informations needed are the same you can find in a saplogon for the system you want to connect to.
Once you'll have defined system and alias you'll see it in you're listbox!
Anyway you'll still face the last problem : you can't define multiple system alias for the same iView.
Hope that helps!!
Edited by: Seb on Jan 9, 2008 4:34 PM

Multiple domains pointing to 1 site

Hi..
If I add multiple domain names to a BC site, just using the "New Domain", does the system handle it in such a way that its not regarded as duplicate content? There is 1 default domain, so how are the rest of the domains treated if added, ie does it use 301 redirects so as to avoid the possibility being penalized by Google?
If this is not the way to do it, can anyone explain how to deal with this, as there is nothing in the knowledge base on how to go about it.....

Hi Liam,
Couple of things...
"You have google indexing multiple domains. If those domains contain the same content - Duplicate Content."
That's clear - thanks.
"You say 301 redirects so I am gathering there are multiple domains to point to one set of content. "
Yes, the client has bought a few different domain names, all which they want pointing to the same website. (Bad practice huh?)
"Was it an attempt to improve SEO"
Yes, seems everyone is a self professed SEO expert these days!
Anyway, what is the best/simplest way to deal with this type of thing?

Multiple IQ databases on one host ---- NLS for BW-HANA

Hi,
We are planning to build a Sybase IQ NLS landscape to support BW on HANA landscapes.
We have thought of installing DEV/QA NLS (IQ) on one server and accordingly have created the file systems on the Linux host. My question is whether we have to install sybase IQ 16 SP8 PL27 twice on the server to have two seperate $SYBASE install directories, from which we can source the environmenmt profiles while launching each of these databases.
The FS layout is as follows --- All FS's will be owned by sybase (2 sets of FS will be created with SIDs for DEV and QAS)
/usr/sap/SID/sybase ------------- sybase install dir
/usr/sap/SID/database -------- catalog DB
/usr/sap/SID/main -------------- IQ_SYSTEM_TEMP
/usr/sap/SID/log -- ---- Transaction logs and other system logs ----- Can the transaction log be stored here for Point in Time Recovery?
/usr/sap/SID/messages --------- messages
/usr/sap/SID/html ---------- html query plans
/usr/sap/SID/sapdata1 to /usr/sap/SID/sapdata4 --- for iq db spaces (user db spaces)
/usr/sap/SID/temp/temp1 to /usr/sap/SID/temp/temp4 --- for iqtmp spaces (both the sapdatax and tempx have same sizes)
Question ---- can the base directory /usr/sap/SID/temp become the IQTMP16 and will it access the other file systems (temp1, temp2 and so on) undreneath it or do we have to just create one file system - /usr/sap/SID/temp?
/usr/sap/SID/tmp ----- path for -dt option in the config file to store server dependant files. - I am not sure what this -dt stands for and how different is it from iqtmp FS (usr/sap/SID/temp....)
Question - In the First Guidance guide, this filesystem is mentioned as (IQ for Sort)... Does /usr/sap/SID/temp (iqtmp) and /usr/sap/SID/tmp (.tmp) have same sizes?
Question - Does the /usr/sap/SID/sapdata, /usr/sap/SID/temp and /usr/sap/SID/tmp have same sizes?
We will install DEV under /usr/sap/DEV/sybase and configure it to use the above file systems. Similarly, we will have filesystems for QAS but the install will begin from /usr/sap/QAS/sybase.....
Is it a viable way of installting multiple NLS databases on one server?
Please help....

already answered here - http://scn.sap.com/thread/3717450

How To Install Multiple OBIEE Instances On One Linux Machine

Hi,
OS: Red Hat ES 5.2
OBIEE : 10.1.3.4
We one development server(Linux) where one OBIEE 10.1.3.4 was installed with os user as 'ora1a' (Deployed on Oracle Application Server 10.1.3.4)
and now I have installed OBIEE 10.1.3.4 on same Linux Server with different user(ora2b) and different mount point (Deployed on Another Oracle Application Server 10.1.3.4 )
But My OBIEE was not working and I came to know that only one can be working by default.
After following few notes i have update NQSConfig.inc and odbc.ini with different ports ie from 9704 to 9725 and bounced BI server and presentation server
But still its not working can any one tell me what are all needs to update to make it work
Thanks in advance
Regards,
Bhanu Chander
Reference's i used: HOW TO: Install Multiple OBIEE Instances On One UNIX Machine (Doc ID 605582.1)

Hi
I was not much clear about what you are telling
See my first OBIEE instance URL is http://hostname18.oracle.com:7777/analytics (As i deployed OBIEE on Application server 10g(OAS1))
and second one is http://hostname18.oracle.com:7778/analytics (As i deployed OBIEE on another Application server 10g(OAS2))
Also My port for first OBIEE instance is 9704 and second one is 9725(Which i changed to this)
Now tell me what are all i should update
Thanks,
Bhanu Chander

Multiple Systems Pointing to One WFM Farm

Similar Messages

Maybe you are looking for