Multiprovider is not acting properly
Hi Gurus,
Need some help on the following issue.
A multiprovider built on 4 cubes and profit centre info objects. For a new reporting requirement on this multiprovider, i had to filter based on navigational attribute. i found after filtering using that navigational attribute one key figure is not populating in the report at all. After detail analysis on the issue i found that the navigatinal attribute is enabled on the multiprovider level but in one of the cube where the unpopulated key figure is based, the navigational attribute is not enabled. So, i enabled the navigational attribute on the cube level. But the key figure is still not populating in the report.
I did the list cube both on multiprovider and on the infocube,
In the infocube's listcube the navigatinal attribute is populating along with key figure.
In the multiprovider's listcube i choose all the field along with field infoprovider to see from which cube data is coming.
I found that navigational attribute is populating for all the cube except for the infocube where the key figure is based on.
I have done some analysis in RSRT using the report. I have run the report with multiprovider explain option. It shows in the infocube some genenal restriction for the navigational attribute. That is why the navigatinal attribute is excluded.
Please help me.
Hi Mitu,
Right click on the navigational attribute in the multiprovider and choose identify/assign.
Check the assignment of the navigational attribute of the infoprovider(cube) with respect to the navigational attribute of the multiprovider.
The checkbox for the assignments should be checked for all the four infocubes.
Hope it helps,
Best regards,
Sunmit.
Similar Messages
-
Has anyone had this problem. I just deleted and reinstalled
FW because my toolbars will not expand on the ones that have
groupings, for example, the rectangle tool. It should expand to
show me many polygon shapes. All the grouped ones will not expand
when it is acting this way. Sometimes I can get it to work properly
but lately it is very frustrating. I have to keep clicking on it in
different places. MX 2004 version. Time to upgrade I guess.That's a problem at the server end, not at your end. If your mail can't be delivered, the server should send back some sort of error message. If it doesn't, that might be because your mail is being flagged as spam, or it might be for some other reason.
-
Position keyframes for titles not acting properly; keep moving backwards near end keyframe
I have no clue what in teh world is going on here. i will set a keyframe in the beginning for the titles initial start point. Move ahead 2 seconds. Set a keyframe. Move the title to where I want it. Play it back, and then right before the end keyframe, the title will go the complete opposite direction if I have another keyframe ahead of it I want it to go to. So yeah, it moves back then moves forwards to the next keyframe. Please help me understand this lunacy.
Having recently encountered this issue, I searched the web for a solution and stumbled upon this thread, which to my surprise was not only left unanswered, but also seemed to be the only search result that was directly relevant to my problem. Luckily, I was able to adapt some advice from a similar situation. Since I finally discovered a solid method, I figured I would offer my knowledge to anyone else treading the same path as me.
I guess they call something like this a "wobbly" keyframe. In After Effects, someone gave the advice to right click and change the temporal interpolation to LINEAR. In premiere, I noticed that they were ALREADY linear, but then I recalled Shooternz post about a spatial ease.
Highlight ALL the keyframes, right click, then select Spatial Interpolation and click on Linear. This should solve the issue. You can then add eases and such to meet your goals.
I knew from the beginning that it must have been an invisible knot in the bezier curves. I pulled the bars in every direction, but all it did was tighten or loosen the knot, causing the motion to speed up or slow down, but it would always hit the knot and reverse before continuing forward. You know how Illustrator will create crazy-looking lines when you try to add too many points with strong curves? Well the same logic applies to this, but Premiere has a much more difficult interface when dealing with bezier curves. In other words, by getting rid of the extra curves instead of trying to fix them like you can in Illustrator, it fixes the problem much more easily.
I hope I helped to clarify the issue and help you understand the logic of what went wrong, so you can move on now and perhaps adapt this knowledge to future obstacles. -
Mail 7.0 not acting properly...
Recent up-grade to OS X 10.9 and now the new Mail doesn't allow me to send Group emails - what gives?? I have customized my Mail window to show the Contacts icon in the header but when I select Contacts I cannot click and drag Groups or individual addresses into the To:, Cc:, or Bcc: fields. If I select any of these fields I get a blue '+' at the right side of the field and when I click on the '+' I get a drop-down of the Contacts but I still cannot click on a Group to add it to the selected field. The only solution seems to be to click on the individual names in the drop-down list and then select the actual email addresses - one at a time. This is a real pain in the butt and very time consuming... THERE MUST BE A BETTER WAY!! This was NOT a problem with OS X 10.8 and earlier.
https://discussions.apple.com/message/23491056#23491056
https://discussions.apple.com/thread/5505203?tstart=0 -
All of the sudden, when I attempt to send an email to anyone with a domain name ([email protected]) instead of internet service provider ([email protected]), the email does not go through.... It appears "sent" on my end, but recipient never gets it. What happened???
That's a problem at the server end, not at your end. If your mail can't be delivered, the server should send back some sort of error message. If it doesn't, that might be because your mail is being flagged as spam, or it might be for some other reason.
-
Constant Selection on MultiProvider is not working properly
Hi All,
We have a MP based on 2 DSOs, say DSO1 & DSO2.
DSO1: Char 1, Char 2, Char 3 and KF1
DSO2: Char 1, Char 2, Char 4 and KF2.
Now, I am creating a query by using constant selection. I have kept all chars in Rows pane and 2 KF in Columns pane. I have restricted KF1 with char 4 and KF2 with char 3 by putting constant selection accordinlgy... However, still I am getting 2 rows of display as below...
char1 char 2 cahr 3 char 4 kf1 kf2
A B C # 10 -----
A B # D ---- 10
Could any one pls suggest how to display in single record... Your help is highly appreciable.
Best Regards
Venkat...Thank you Anshu for your suggestion.
Here, I wrongly mentioned the KF details. Both the KFs are existed in both DSO1 & DSO2. The only thing is DSO1 data is coming from ECC(R/3) and DSO2 data is coming from CRM. Now, I want to show the all chars w.r.t infoprovider wise KF vaues in a single row. Shall we achieve it by constant selection approach? Could you suggest any work around please...
Best Regards
Venkat... -
When visiting Roliana the Your Posts and Bookmark sections are suppose to load a list of my previous posts or bookmarks, this section is designed to have a cool down period between clicks. Even if it is the first time in a 24 hour window that I click on the link it acts as though I have double clicked or attempted to access it too quickly.
On another site NeuroGalaxy the games will not work properly, they too act as though I have attempted to access them even though it is the first time in a 24 hour window.
The last site Kingdom of Knuffle is having an event where one has to click the answer to quiz, it too can only be accessed once a day and when I click on the answer it redirects me as though I have tried to access it multiple times.
I have attempted to use these functions on other browsers and they work fine, the only thread of similarity between the issues is Firefox and that they are all timed applications in some manner.
There are no errors to report or other oddities going on, the sites otherwise display and operate properly.Reload web page(s) and bypass the cache to reset animated GIFs.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC) -
Remote not working properly with Apple TV...sporadic fuctioning
Hello,
I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
Please let me know if any of you have ever experienced this problem and what your solution was, if any!
I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
HELP PLEASE!
Thank you,
TravisThe menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV. -
JTextField does not redraw properly
Hi,
I have a JPanel that displays some buttons amongst some textfields and labels. One of my buttons is labeled Add Customer. When the user clicks on Add Customer he is presented with a number of JTextFields and JLabels which are all displayed fine.
However, when the user clicks on Cancel or closes the InternalFrame in which the JTextFields and JLabels are displayed and then clicks on Add Customer again, then the JTextFields are not redrawn properly. I image of this behavior can be seen at
http://www.grosslers.com/totals.07.png
As soon as I start to type text into the textfield then the whole textfield redraws itself as it should, but when it looses focus then the textfield becomes invisible once again.
// Some textfields
private JTextField textField_customerEditCompanyName = new JTextField(10);
private JTextField textField_customerEditContactName = new JTextField(10);
* Panel that will hold all the buttons for the quote request details tabbed panel
public JPanel createQuoteRequestDetailsButtons() {
// Panel to act as a container for the buttons
JPanel panel_quoteRequestDetailsButtons = new JPanel();
// Create, register action listeners and add buttons to the panel
JButton button_addCustomer = new JButton("Add Customer");
button_addCustomer.addActionListener(new ActionListener() {
public void actionPerformed (ActionEvent actionEvent) {
// Add a new customer
addCustomerListener();
panel_quoteRequestDetailsButtons.add(button_addCustomer);
return panel_quoteRequestDetailsButtons;
* Display a new internal frame when the user wants to add a new customer
public void addCustomerListener() {
// Master panel for the add customer details
JPanel panel_addCustomerMaster = new JPanel();
// Add the customer details panel to the master panel
panel_addCustomerMaster.add(customerDetailsPanel());
// Ensure that all the textfields are blank
resetCustomerDetailsPanelTextFields();
// Add the buttons panel to the master panel
panel_addCustomerMaster.add(addCustomerButtons());
// Add the master panel to the internal frame
internalFrame_addCustomer.add(panel_addCustomerMaster);
// Add the internal frame to the desktop pane
JupiterMainGUI.desktopPane.add(internalFrame_addCustomer);
// Set the size of the internal frame
internalFrame_addCustomer.setSize(500,420);
// Set other properties of the internal frame
internalFrame_addCustomer.setClosable(true);
internalFrame_addCustomer.setIconifiable(false);
internalFrame_addCustomer.setMaximizable(false);
// Set the location of the internal frame to the upper left corner
// of the current container
internalFrame_addCustomer.setLocation(0,0);
// Set the internal frame resizable
internalFrame_addCustomer.setResizable(false);
// Show the internal frame
internalFrame_addCustomer.setVisible(true);
* Panel that displays the textfields and labels when the user clicks on
* add or view customer details
public JPanel customerDetailsPanel() {
// Create master container for this panel
JPanel panel_customerDetailsMaster = new JPanel();
// Create the container that will hold all the textfields/labels for
// the creation of a new customer
JPanel panel_customerDetails = new JPanel(new SpringLayout());
// Add the details panel to the master panel
panel_customerDetailsMaster.add(panel_customerDetails);
// Set the border for the panel
panel_customerDetails.setBorder(BorderFactory.createTitledBorder("Customer Details"));
// Create textfields/labels, add them to the internalFrame
JLabel label_customerCompanyName = new JLabel("Company Name : ");
JLabel label_customerContactName = new JLabel("Contact Name : ");
panel_customerDetails.add(label_customerCompanyName);
panel_customerDetails.add(textField_customerEditCompanyName);
panel_customerDetails.add(label_customerContactName);
panel_customerDetails.add(textField_customerEditContactName);
//Lay out the panel.
SpringUtilities.makeCompactGrid(panel_customerDetails,
2, 2, //rows, cols
5, 5, //initX, initY
5, 5); //xPad, yPad
return panel_customerDetailsMaster;
* Panel holding the buttons when the user clicks on add customer
public JPanel addCustomerButtons() {
// Container for the buttons
JPanel panel_addCustomerButtons = new JPanel();
// Create the buttons for the panel
JButton button_customerOk = new JButton("Ok");
JButton button_customerCancel = new JButton("Cancel");
button_customerOk.addActionListener(new ActionListener() {
public void actionPerformed (ActionEvent actionEvent) {
// Closing the internal frame. When i re-open this internal frame again
// the labels are re-drawn properly but not the textfields.
button_customerCancel.addActionListener(new ActionListener() {
public void actionPerformed (ActionEvent actionEvent) {
try {
// close and remove the internal frame from the desktop pane
internalFrame_addCustomer.setClosed(true);
} catch (PropertyVetoException exception) {
JupiterMainGUI.desktopPane.remove(internalFrame_addCustomer);
panel_addCustomerButtons.add(button_customerOk);
panel_addCustomerButtons.add(button_customerCancel);
return panel_addCustomerButtons;
}So far I have a solution, and that is to use the GTK look and feel, but it is not really an option. Another way that I have managed to get the textfields to display properly is to create them in the same method, where I create the labels. Again, this is not really an option as i need to access the textfields outside the method scope.
Any help would be greatly appreciated
-- PokkieI added the following :
* Panel that displays the textfields and labels when the user clicks on
* add or view customer details
public JPanel customerDetailsPanel() {
// Create master container for this panel
JPanel panel_customerDetailsMaster = new JPanel();
// Create the container that will hold all the textfields/labels for
// the creation of a new customer
JPanel panel_customerDetails = new JPanel(new SpringLayout());
// Add the details panel to the master panel
panel_customerDetailsMaster.add(panel_customerDetails);
// Set the border for the panel
panel_customerDetails.setBorder(BorderFactory.createTitledBorder("Customer Details"));
// Create textfields/labels, add them to the internalFrame
JLabel label_customerCompanyName = new JLabel("Company Name : ");
JLabel label_customerContactName = new JLabel("Contact Name : ");
panel_customerDetails.add(label_customerCompanyName);
panel_customerDetails.add(textField_customerEditCompanyName);
panel_customerDetails.add(label_customerContactName);
panel_customerDetails.add(textField_customerEditContactName);
// Added this line , but doesn't seem to make a difference. also called revalidate() on the
// internalFrame in which this panel is displayed but no luck either. Called revalidate()
// on panel_customerDetailsMaster but nothing :(
panel_customerDetails.revalidate();
//Lay out the panel.
SpringUtilities.makeCompactGrid(panel_customerDetails,
2, 2, //rows, cols
5, 5, //initX, initY
5, 5); //xPad, yPad
return panel_customerDetailsMaster;
Thanks for the response thou, much appreciated -
Subvi does not work properly when called inside a vi
Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip 87 KBI just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.
-
9810 funtions and screen not working properly.
HI all, hoping to find some help here. My 9810 is acting up. None of the keys are working, even the 5 below the screen. Sometimes the track pad works but not when it is pressed, and when the back botton works it puts me into sreach mode and looks for the letter "H" only. The touch screen is fine. This was before upgrading to OS7.1. I have done multiple hard resets and it does nothing at all. This has been going on for three days now. It hasn't be dropped or anything.
Last night I upgraded to OS 7.1 now my back ground does not rotate properly with how the phone is being held it does rotate, When you hold it upright it thinks its on it's side and vise versa.
Has anyone had a similar problem, and how can I fix it? Or is it one of those ones when you just get a new phone. I have only had it since Feb 29, 2012
ThanksHello Champi,
Welcome to the BlackBerry Support Community.
The following article will assist regarding the issue you are experiencing with the keyboard and trackpad on your BlackBerry® Torch™ 9810 smartphone:
Trackpad, trackball, or keyboard not working on a BlackBerry Smartphone - http://www.blackberry.com/btsc/KB29640
We hope this helps.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
Mouse is not working properly on a one month old HP Pavillion 15-NO28US
I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?
Hi Kevin3047,
Thank you for your query, I will do my best to assist you!!
I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help. You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
Here is a step that may help.
Go to the Command Prompt and right click on it to run as Administrator
type sfc /scannow and press enter. This will scan for corrupted files and try to repair them.
Here are links to two documents that may aid with this process.
Troubleshooting Mouse Problems (Windows 8)
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Would you also please try a clean boot to see if it persists. Here is a Windows document to assist you.
How to perform a clean boot in Windows
If none of this has alleviated the issue, I suggest you do a Refresh Your PC to Resolve Problems (Windows 8).
If the issue still pesists, I would do a recovery again. You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
Performing an HP System Recovery (Windows 8)
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance. They are able to remotely log onto your system to help with this difficulty.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Good Luck!!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
I dropped my iPhone 5S and it landed flat on it's face (it was in a protective case). Since then my touch screen display is not working properly. I have white and grey lines and/or blocks crisscrossing the screen both horizontally and vertically. Screen responds to touch in odd random ways, but rarely does what I am trying to do. Can't call or receive calls because can't dial or answer phone via swipe. Can't text or read incoming texts. All functions seem to be working except that I can't access them because the touch screen is acting up. If I move the phone around it randomly accesses different apps or functions, but I have no control over them once the appear on the screen. Touching screen just causes phone to randomly choose something else to open. What have I damaged?
Shanegang77 wrote:
What have I damaged?
We cannot possibly tell. Obviously some hardware inside. Take it in to an Apple Store. They will offer you the opportunity to swap the phone for $269 in the US. Prices vary by country. -
My Trackpad is not working properly, What shall i do?
Trackpad is not functioning properly once i updated my computer last night it worked perfectly but by the end of the night it start to act funny!
Why not describe the funny behavior?
-
My trackpad is not working properly since installing the upgrade. What should I do?
My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?
i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type
Maybe you are looking for
-
As a part of design I have .INC files that contain HTML that is to be processed by PHP. The extension is .INC to separate it from .HTML files which don't need pre-processing. I sometimes need to preview those files as HTML, but Firefox always display
-
Black Sabbath "13" Digital Booklet pdf Will Not Open in Adobe Reader
I recently purchased the new Black Sabbath 13 (Deluxe Version) album in iTunes and the pdf digital booklet will not open in Adobe Reader. I only get errors saying the file is either not supported, or is damaged. Any suggestions?
-
Error 805a0194 When trying to download App
i am unable to download the navigation app and get the error code 805a0194. I have restarted the phone which is a Lumia 620 purchased only a day ago. A full reset has not helped. The reason I purchased a Nokia was for the navigation. Is there anythin
-
Level up or Down in Query Deisgner / BI 7.0
Hi Experts, in the BI 3.5 it was possible in query designer to use a key figure or caharcteristic. I can not find this function in BI 7.0. Could you please help me how to do it or how to find it? Thanks
-
I have an issue with my Cintiq not drawing smoothly in Flash. I need to sketch incredibly fast and loose. Flash used to work just fine but now it suddenly began drawing really crummy. I posted some examples of flash as well as Photoshop, Sketchbook P