Mumble, alsa update and veromix probs

So I updated today to the newest kernel and it pulled down the newest alsalib too. I tried launching mumble but no kdeplasma has run away cpu usage.
I tried installing veromix-svn and mumble-git, but neither fixed this issue.
I'm fairly sure that mumble is to blame here; it never worked with pulseaudio selected as the input or output and I always had to leave it as alsa. Now I can only hear sound and the mic is broken along with the high CPU usage when I run the program.
Can anyone confirm that this is happening to them too?
Thanks,
DF

pacman -S base-devel && pacman -Suy should give you everything you need, except specific dependencies.
Ahh that what I get for posting without refreshing OP.
Last edited by jwbirdsong (2010-01-16 17:04:28)

Similar Messages

I SOLVED UPDATER AND ITUNES PROB

Ight what you have to do is uninstall any itunes and ipod updater progams then restart pc. then simply install ipod disc again and it should work now hear me out ITS NOT ITUNES FIVE PUT THAT IN RECYCLE BIN. it worked for me. you think you dont have your playlist well you goto file
Add folder to library. then
itunes link then
itunes music link
and its all there
but its a long process to put all songs on
-Mock

Alright, I've just done the the what is apperantly Apple's "Final Solution" to all iPod problems, the reformat of my iPod using my mom's computer. What this proved is:
A. My USB cable works fine.
B. My iPod is perfectly okay, since iTunes recognized it on her computer.
So the problem has got to lie with the PC (go figure). And I suppose that, while this would eliminate the responsibility of Apple to offer any help to people experiencing this issue, it is still really lame of Appleto not even bother to point us in a general direction to where we could find help.
My next step is a full reformat of my PC, since it used to work on here. Also, an extra bit of info; this whole "ipod not being detected by itunes" problem popped up when I installed a scanner to my computer. This was a few months back before I had to send the thing in to get repaired. So what I did after I installed the scanner was a system restore to before I installed all of the scanner software, and my iPod worked again. I later tried installing the scanner again, and I had the same problem. Except that time, instead of the computer not detecting my iPod, it practically murdered my iPod forcing me to send it in.
My theory at this point is that something in the scanner drivers interfered with my iPod, even though that doesn't really make any sense, it doesn't seem coincidental.
Since I was away from my computer and iPod for a month I wasn't able to system restore back that far again, so I tried uninstalling my scanner software and WIA driver. This hasn't helped one bit.
Anyways, maybe you guys should test you iPods on other computers, and if they work, try to remember if you installed anything the day they stopped working to see if we can find any actual links.

HT1414 i have a 2008 ipod. trying to update and getting -1 error. Have reset Ipod and then tried, same prob

I am trying to update and ipod touch 2008 8g. I keep getting the -1 error. I have reset and taken the apps and music off and am still getting that error.

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I HATE THE NEWEST ITUNES UPDATE. how can i uninstall this latest update and keep the older version??

I HATE THE NEWEST ITUNES UPDATE. how can i uninstall this latest update and just use the previous version??

I have same prob as Mizz Gibbs.
itunes = 11.1.3.8
OS = Win 7 Home Preimum Service Pack 1 (with latest updates applied)
thx for any help you can offer ...

ALSA updates break dmix

I just updated to the latest alsa packages and udev.
Before I was running software mixing (dmix) with alsa just fine.
But now after the update it is not working at all anymore:
ALSA lib conf.c:1165:(parse_def) dmix is not a compound
ALSA lib conf.c:1578:(snd_config_load1) _toplevel_:9:10:Invalid argument
ALSA lib conf.c:2823:(snd_config_hook_load) /etc/asound.conf may be old or corrupted: consider to remove or fix it
ALSA lib conf.c:2686:(snd_config_hooks_call) function snd_config_hook_load returned error: Invalid argument
ALSA lib conf.c:3052:(snd_config_update_r) hooks failed, removing configuration
alsamixer: function snd_ctl_open failed for default: Invalid argument
Anyone know what has changed and how to fix this?

Lots of dmix related changes:
http://www.alsa-project.org/changes/v1-0-8--v1-0-9.txt
and the most important one I think
For ALSA 1.0.9rc2 and higher you don't need to setup dmix. Dmix is enabled as default for soundcard which doesn't support hw mixing.
Maybe you just need to... empty your config?

Problem with the latest alsa updates

After the latest alsa-lib and alsa-utils updates, I cannot use 5.1 surround any longer.
Even a "speaker-test -Dplug:surround51 -c6 -l1 -twav" gets stuck at :
Playback device is plug:surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 5440
Period size range from 32 to 2720
Using max buffer size 5440
Periods = 4
was set period_size = 1088
was set buffer_size = 5440
0 - Front Left
and will not go any further.
If I start mplayer with "-channels 6" - it will hang. Same thing in vlc if I select the 5.1 device in the audio menu.
It all used work fine before these updates.
Any ideas?
Last edited by zamolxis (2008-11-09 00:24:06)

There is now a fix for this at alsa git. I sent it to Arch bug tracker so it might get fixed pretty soon.
For the restless, look http://bugs.archlinux.org/task/12225
Applying it to the current PKGBUILD is trivial, add "patch -Np1 -i ../pcm_softvol.c.patch || return 1" before configure at line 20.

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

HT5381 i did a software update and now mail wont open at all

Help......my mail app is coming up with an error "You can't use this version of Mail with this version of Mac OS X". Can I uninstall the update?

!! WARNING !!
about the September 2012
"Security Update 2012-004"
If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
**BEFORE** INSTALLING THE "004" UPDATE!!
Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
Been through it all, already. In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation. So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD?? Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
My recommendation for this particular September 2012 "004" update:
If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT. DO NOT DOWNLOAD IT USING SOFTWARE UPDATE ! Instead, download the actual update file itself.
Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
#2. Go here: https://support.apple.com/kb/DL1586
And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
Then, after restarting, run Disk Utility's "Repair Disk Permissions."
Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
THEN fire up & install "SecUpd2012-004.dmg."
Reboot.
After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
Happy Mac'in!
Kevin Kendall
Macbook 7,1
(Apple's very last all-white Macbook model)
2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

HT204053 Our family uses one Apple ID for all of our iPhones. We installed the update and now we are all getting each others photos and texts. How do we stop this?

Our family uses one Apple ID for all of our iPhone 5's. We installed the update and now we are all receiving each other's pictures and texts. How do we stop this?

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

I do updates and then have to reinstall previous versions - time and time again because of the number of unsupported add-ons

4 or 5 times I've updated Firefox only to have to reinstall the previous version due to incompatibility with add-ons / plug-ins / toolbars. I'm not a big user of Toolbars but I have some add on I use daily.
The last 3 times I did a "suggested by Firefox" update I've had to reinstall a previous version from my saved files in order to use Firefox. This problem has caused me to return to IE as my default browser - but unwillingly.
My current setup is Firefox 4.0.1 Beta and I had to reinstall a version 3 in the Firefox folder until addons starting working in this 4.0.1 Beta. However 4.0.1 has always hung up, even opening a tab and ceases to respond; sometimes for minutes.
I run Win XP - SP3 Dell Pentium 4 - 3.0ghz with 4 gigs of DDR2 - GX520. So it's not an equipment problem - (I have 4 PC's on my home LAN - although each serves it's purpose and seldom are 2 used at the same time.
When I installed 4.0.1 and then reinstalled 3.x ... I've been hoping for an update --- I love Firefox - have ever since first use - and then today I saw the update versions had jumped from 4 all the way to 7. I was enthused.
Same issue. On install over the V 3.x it showed 6 items of add-ons that were incompatible. I did not remove the V 7 ... I simple reopened the 4.0.1 beta. I use it for single page browsing as tabs locks it up or slows it to a crawl.
I'm having to continue using IE as my default --- I always keep a backup browser, but I don't care for much of anything that has an MS on it's name.
I've never posted to Mozilla ... but the idea crossed my mind over a year ago when I updated and had to back-up and reinstall. WHY can't a program precede the update to check for compatibility, just as an upgrade adviser from one OS to another?
This was the biggest list of all. NET Framework Assistant, Google Toolbar, Yahoo Toolbar, Roboform ... there were 2 others. I don't use the Yahoo Toolbar. I have Google Toolbar installed but keep it hidden except when I need it (for Page Rank, etc., I work websites).
But I won't use a browser that doesn't support AI Roboform.
I honestly love Firefox. I code webpages - .asp, .html and do SEO ... but I don't know the difficulty of writing even a small application. Would it be too difficult to have a small program that would check for these add-on incompatibilities before installing the updates.
I was impressed with 4.0.1 beta until I realized that opening a new window or tab bogged it down.
I want Firefox back but not with band-aids and work-around bandages. Is there a version between 4.0.1 and v7 which I tried tonight that would support my plug-ins / add-on. My experience with Firefox using versions up to 3.x has been great. But for months and months I open 4.0.1 and open my TV guide at ZapIt and then I've had to use IE 8 for all my web browsing.
My most important add-on is for Roboform and 2nd would be for Google Toolbar - but on a scale of 1-10 Roboform is a 10+ and Google Toolbar a 3.
If this post does not go to the support team at Firefox then how would I go about suggesting an Update Adviser prior to installing an update?
Anyone with a flexible solution - even short term - that would allow me to see Firefox improvements since the v4 I'm using would be more appreciated than I could ever express.
Since I've never posted before I'm not even sure how I'll get a response or be able to see any responses. Something during the registration said I could get an email when a reply was posted.
Thanks again for listening to me whimper and beg for a workable Firefox; I miss it.

this is all I can find, thank you for your time.
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Files that help describe the problem
Mini010710-11.dmp
sysdata.xml
Version.txt
View a temporary copy of these files
Warning:If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode: 1000007f
BCP1: 00000008
BCP2: 80176000
BCP3: 00000000
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. This is an APPLE Itunes issue. Help!. HPPavillion DV6 64 bit, windows 7

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.

I downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

i downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

What version of iPhoto?
What format is the disk?

Windows Update in Endless Loop of 'Installing updates" and "Undoing changes" on New Windows 8.1 Pro Install

I am setting new Windows 8.1 Pro computers, and am installing Windows 8.1 Pro to bare drives. Everything goes fine until Windows Update starts installing updates, and then the computer goes for hours installing updates, and then "We
could not complete the updates Undoing changes". It's an endless loop. It seems to be the same 38 updates. This is a recent phenomenon. I have not run into this until the last week or two on several new computer installs.
Again these are brand new installs, so something is clearly wrong with the Windows updates.
If anyone can please tell me how to avoid this, it would be much appreciated.
Michael

Hi Michael,
" This is a recent phenomenon"
Have you made any modifications to the machines ?
To resolve this issue ,running the built-in troubleshoot tool is a very good beginning .It will automatically diagnostic the windows update components and check the configurations for us .
Control Panel\All Control Panel Items\Troubleshooting\Fix problems with Windows Update
If there are antivirus software installed in these machines, please turn off them temporarily to have a check.
The command line included in the link as S.Sengupta posted is very useful and convenient to repair the windows corrupted files .We can have a try .
"sfc /scannow" ,"DISM.EXE /online /cleanup-image /restorehealth "
We also can check the windowsupdate.log for more information to troubleshoot this issue .
Run "windowsupdate.log"
If you have trouble in analyzing the log ,please upload them to the OneDrive and paste the link here .
Best regards

I attached my perfectly functioning iPhone 4 to my computer to update and came back to an error message saying I have to do a factory restore which cause me to lose everything recent because I'm not even sure that the backup completed correctly

I left my iPhone attached to my computer to do an update and now I can't use the phone at all. It was taking so long I left it, when I came back there was an erroe message saying that I need to do a factory restore on the phone. It wasn functioning perfectly before I attached it to iTunes to do the update and now since I can't even be sure that the back up completed, I'm faced with losing a lot of stuff recently added to my phone.
I don't want to do a restore, I just want my phone back to how it was this afternoon before I connected it to iTunes.

If the screen shows a plug going to itunes, then you have no choice, It's in recovery mode. You'll be given the chance to restore from a backup either from itunes or icloud.
I assume when you got the message to update (was this for the ios or update some apps?), that was before the device when dead. At any rate, doing a restore does not change the ios.

When I plug in my iPod and it syncs it says that a bunch of my apps cannot be loaded because my iPod does not have the latest software to support them, but I have done all of the iPod software updates and the same apps were working fine just weeks ago...?

I plug in my iPod to charge from my computer and it syncs with my iTunes, but I've been getting a message that a list of 13 of my apps cannot be loaded onto my iPod because it doesn't have the latest software to support them. I have done all the software updates for my iPod and iTunes says it is completed up-to-date. Do I need to delete the apps and redownload them or what?
Any help is appreciated! Thanks.

ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

Mumble, alsa update and veromix probs

Similar Messages

Maybe you are looking for