Music wont play after updating iPhone 4 to iOS 6.

After upgrdaing my iphone 4 software: my music library wont play any songs. It just skips all of them until it reaches the end of the list. I't seems that subscribing to iTunes Match will solve this problem but i dont want to pay for it. Is there any other solution that dosnt involve subscribing?

I'm having the exact same problem! Only some of my songs are on there. Like it will show that the song is there but the content is not. It keeps skipping until it finds a song that actually downloaded. I've restored my phone twice since upgrading to ios6 and nothing helps. I hate this update and wish I never did it.

Similar Messages

  • HT1386 My purchased music wont play on the iphone

    My purchased music wont play on the phone even after syncing it with itunes. Only the music that I loaded into itunes from CD will play on the phone. I've tried everything to sync and reload the phone library!!! Now what?

    Consider yourself lucky!  I have been unable to disable music on my iphone. Let's trade phones!

  • Music wont play after OS4 update

    Hello People,
    I updated my iPod this morning and I just noticed that I no longer have use of the music function. It loads find but closes itself after a few seconds, (4 perhaps?)
    Has anyone else experienced this, is there a solution?
    Regards,
    David.

    I resolved the issue,
    1. Plug your iPod into your computer / mac
    2. Allow the iPod to Sync
    *_I did two things here, not sure which fixed the problem_*
    3. Play a song on your iPod from your computer / Mac through iTunes.
    4. Add a new song.
    When I ejected my iPod the problem had gone and I could play music again.
    Regards,
    David.

  • Music wont play after pause

    I have a little issue with mpd+ncmpcpp.
    When i start a song, and then pause it, if i want to listen to youtube fx. when i then wanna hear the music again it wont start.
    When i start a song, it says playing for about 1 second, then just change back to pause. To make it work i have to logout and in again, or reboot. It's really annoying. Do any of you have an answer to this?

    Here you go, my mpd.conf file
    # An example configuration file for MPD
    # See the mpd.conf man page for a more detailed description of each parameter.
    # Files and directories #######################################################
    # This setting controls the top directory which MPD will search to discover the
    # available audio files and add them to the daemon's online database. This
    # setting defaults to the XDG directory, otherwise the music directory will be
    # be disabled and audio files will only be accepted over ipc socket (using
    # file:// protocol) or streaming files over an accepted protocol.
    music_directory "/mnt/windows/Musik"
    # This setting sets the MPD internal playlist directory. The purpose of this
    # directory is storage for playlists created by MPD. The server will use
    # playlist files not created by the server but only if they are in the MPD
    # format. This setting defaults to playlist saving being disabled.
    playlist_directory "/var/lib/mpd/playlists"
    # This setting sets the location of the MPD database. This file is used to
    # load the database at server start up and store the database while the
    # server is not up. This setting defaults to disabled which will allow
    # MPD to accept files over ipc socket (using file:// protocol) or streaming
    # files over an accepted protocol.
    db_file "/var/lib/mpd/mpd.db"
    # These settings are the locations for the daemon log files for the daemon.
    # These logs are great for troubleshooting, depending on your log_level
    # settings.
    # The special value "syslog" makes MPD use the local syslog daemon. This
    # setting defaults to logging to syslog, otherwise logging is disabled.
    log_file "/var/log/mpd/mpd.log"
    error_file "/var/log/mpd/mpd.error"
    # This setting sets the location of the file which stores the process ID
    # for use of mpd --kill and some init scripts. This setting is disabled by
    # default and the pid file will not be stored.
    pid_file "/var/run/mpd/mpd.pid"
    # This setting sets the location of the file which contains information about
    # most variables to get MPD back into the same general shape it was in before
    # it was brought down. This setting is disabled by default and the server
    # state will be reset on server start up.
    state_file "/var/lib/mpd/mpdstate"
    # General music daemon options ################################################
    # This setting specifies the user that MPD will run as. MPD should never run as
    # root and you may use this setting to make MPD change its user ID after
    # initialization. This setting is disabled by default and MPD is run as the
    # current user.
    user "mpd"
    # This setting sets the address for the daemon to listen on. Careful attention
    # should be paid if this is assigned to anything other then the default, any.
    # This setting can deny access to control of the daemon.
    # For network
    bind_to_address "any"
    # And for Unix Socket
    #bind_to_address "~/.mpd/socket"
    # This setting is the TCP port that is desired for the daemon to get assigned
    # to.
    port "6600"
    # This setting controls the type of information which is logged. Available
    # setting arguments are "default", "secure" or "verbose". The "verbose" setting
    # argument is recommended for troubleshooting, though can quickly stretch
    # available resources on limited hardware storage.
    log_level "default"
    # If you have a problem with your MP3s ending abruptly it is recommended that
    # you set this argument to "no" to attempt to fix the problem. If this solves
    # the problem, it is highly recommended to fix the MP3 files with vbrfix
    # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
    # point gapless MP3 playback can be enabled.
    gapless_mp3_playback "yes"
    # This setting enables MPD to create playlists in a format usable by other
    # music players.
    save_absolute_paths_in_playlists "no"
    # This setting defines a list of tag types that will be extracted during the
    # audio file discovery process. Optionally, 'comment' can be added to this
    # list.
    metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
    # Symbolic link behavior ######################################################
    # If this setting is set to "yes", MPD will discover audio files by following
    # symbolic links outside of the configured music_directory.
    follow_outside_symlinks "yes"
    # If this setting is set to "yes", MPD will discover audio files by following
    # symbolic links inside of the configured music_directory.
    follow_inside_symlinks "yes"
    # Zeroconf / Avahi Service Discovery ##########################################
    # If this setting is set to "yes", service information will be published with
    # Zeroconf / Avahi.
    #zeroconf_enabled "yes"
    # The argument to this setting will be the Zeroconf / Avahi unique name for
    # this MPD server on the network.
    #zeroconf_name "Music Player"
    # Permissions #################################################################
    # If this setting is set, MPD will require password authorization. The password
    # can setting can be specified multiple times for different password profiles.
    #password "password@read,add,control,admin"
    # This setting specifies the permissions a user has who has not yet logged in.
    #default_permissions "read,add,control,admin"
    # Input #######################################################################
    input {
    plugin "curl"
    # proxy "proxy.isp.com:8080"
    # proxy_user "user"
    # proxy_password "password"
    # Audio Output ################################################################
    # MPD supports various audio output types, as well as playing through multiple
    # audio outputs at the same time, through multiple audio_output settings
    # blocks. Setting this block is optional, though the server will only attempt
    # autodetection for one sound card.
    # See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
    # other audio outputs.
    # An example of an ALSA output:
    audio_output {
    type "alsa"
    name "My ALSA Device"
    device "hw:0,0" # optional
    format "44100:16:2" # optional
    mixer_device "default" # optional
    mixer_control "PCM" # optional
    mixer_index "0" # optional
    # An example of an OSS output:
    #audio_output {
    # type "oss"
    # name "My OSS Device"
    ## device "/dev/dsp" # optional
    ## format "44100:16:2" # optional
    ## mixer_device "/dev/mixer" # optional
    ## mixer_control "PCM" # optional
    # An example of a shout output (for streaming to Icecast):
    #audio_output {
    # type "shout"
    # encoding "ogg" # optional
    # name "My Shout Stream"
    # host "localhost"
    # port "8000"
    # mount "/mpd.ogg"
    # password "hackme"
    # quality "5.0"
    # bitrate "128"
    # format "44100:16:1"
    ## protocol "icecast2" # optional
    ## user "source" # optional
    ## description "My Stream Description" # optional
    ## genre "jazz" # optional
    ## public "no" # optional
    ## timeout "2" # optional
    # An example of a httpd output (built-in HTTP streaming server):
    #audio_output {
    # type "httpd"
    # name "My HTTP Stream"
    # encoder "vorbis" # optional, vorbis or lame
    # port "8000"
    ## quality "5.0" # do not define if bitrate is defined
    # bitrate "128" # do not define if quality is defined
    # format "44100:16:1"
    # An example of a pulseaudio output (streaming to a remote pulseaudio server)
    #audio_output {
    # type "pulse"
    # name "My Pulse Output"
    ## server "remote_server" # optional
    ## sink "remote_server_sink" # optional
    ## Example "pipe" output:
    #audio_output {
    # type "pipe"
    # name "my pipe"
    # command "aplay -f cd 2>/dev/null"
    ## Or if you're want to use AudioCompress
    # command "AudioCompress -m | aplay -f cd 2>/dev/null"
    ## Or to send raw PCM stream through PCM:
    # command "nc example.org 8765"
    # format "44100:16:2"
    ## An example of a null output (for no audio output):
    #audio_output {
    # type "null"
    # name "My Null Output"
    # This setting will change all decoded audio to be converted to the specified
    # format before being passed to the audio outputs. By default, this setting is
    # disabled.
    #audio_output_format "44100:16:2"
    # If MPD has been compiled with libsamplerate support, this setting specifies
    # the sample rate converter to use. Possible values can be found in the
    # mpd.conf man page or the libsamplerate documentation. By default, this is
    # setting is disabled.
    #samplerate_converter "Fastest Sinc Interpolator"
    # Volume control mixer ########################################################
    # These are the global volume control settings. By default, this setting will
    # be detected to the available audio output device, with preference going to
    # hardware mixing. Hardware and software mixers for individual audio_output
    # sections cannot yet be mixed.
    # An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
    # setting is used other sound applications will be affected by the volume
    # being controlled by MPD.
    #mixer_type "hardware"
    # An example for controlling all mixers through software. This will control
    # all controls, even if the mixer is not supported by the device and will not
    # affect any other sound producing applications.
    #mixer_type "software"
    # This example will not allow MPD to touch the mixer at all and will disable
    # all volume controls.
    #mixer_type "disabled"
    # Normalization automatic volume adjustments ##################################
    # This setting specifies the type of ReplayGain to use. This setting can have
    # the argument "album" or "track". See <http://www.replaygain.org> for more
    # details. This setting is disabled by default.
    replaygain "album"
    # This setting sets the pre-amp used for files that have ReplayGain tags. By
    # default this setting is disabled.
    #replaygain_preamp "0"
    # This setting enables on-the-fly normalization volume adjustment. This will
    # result in the volume of all playing audio to be adjusted so the output has
    # equal "loudness". This setting is disabled by default.
    #volume_normalization "no"
    # MPD Internal Buffering ######################################################
    # This setting adjusts the size of internal decoded audio buffering. Changing
    # this may have undesired effects. Don't change this if you don't know what you
    # are doing.
    audio_buffer_size "2048"
    # This setting controls the percentage of the buffer which is filled before
    # beginning to play. Increasing this reduces the chance of audio file skipping,
    # at the cost of increased time prior to audio playback.
    buffer_before_play "10%"
    # Resource Limitations ########################################################
    # These settings are various limitations to prevent MPD from using too many
    # resources. Generally, these settings should be minimized to prevent security
    # risks, depending on the operating resources.
    connection_timeout "60"
    max_connections "10"
    max_playlist_length "16384"
    max_command_list_size "2048"
    max_output_buffer_size "8192"
    # Character Encoding ##########################################################
    # If file or directory names do not display correctly for your locale then you
    # may need to modify this setting. After modification of this setting mpd
    # --create-db must be run to change the database.
    filesystem_charset "UTF-8"
    # This setting controls the encoding that ID3v1 tags should be converted from.
    id3v1_encoding "ISO-8859-1"

  • Twitter app broken after update (iPhone 3G/iOS 3.1.3)

    I updated the Twitter app on my iPhone 3G to version 3.0.2 earlier this week. The app does not work at all. I click the app, it goes to a white screen, and then closes again. I'm on iOs 3.1.3; no problems at all with the phone since upgrading to 3.1.3. Any thoughts?

    After posting this, I found @twittermobile, where the following was posted:
    "Pre iOS 3.2 1st gen iPhone users, we still care about you! A fix is on its way asap."

  • Music stopped playing after updating

    I'm not sure when this quit working, but I suspect after I installed the latest update. Sound works fine when playing a movie, or podcast, but nothing works with music. I can't play my own music (which I stream from a Windows XP PC) and I can't even play music from the iTunes store directly.
    This used to work just fine, but now, nothing.
    Any ideas?
    Dan

    It's fixed. I just re-synced the Apple TV with iTunes and now it works.

  • Sound wont play after updating latest OS

    Hi,
    I just updated my OS to the 10.8.4 and now my sound will not play?  Any suggestions? 

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. Reinstall Mountain Lion 10.8.4 Combo Update.
        http://support.apple.com/kb/DL1659

  • Alot of my music wont play after getting ios7

    can anyone help me out with this?

    Try to unsync all of the music and then resync it.

  • Some of my podcasts are in a light grey font and wont play after update and sync. They appear but I cant listen to them.... Why not?

    I guess the title kinda says it all....

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

  • HT5262 I've updated to iOS 6 and now my music wont play in my Audi - anyone else had this problem?

    I've updated to iOS 6 and now my music wont play in my Audi - anyone else had this problem?

    What do you mean by "on the days that should be marked"?  Are you calendar events displayed on the wrong days?

  • After i publish my website the music wont play.

    After i publish my website the music wont play. It just shows a question mark. I have updated the quick time software but it's still not working. It use too but one day it just stopped. I have it on autoplay but still nothing. Please help!!

    Are you referring the the small ? at the bottom of the page under this graphic: , ?
    It appears that the audio file is in the footer of the page.  Move it into the bottom of the body and see if it will display and play correctly.

  • Appstore wont open after update ios 6.0

    appstore wont open after update ios 6.0. my imessages undelivered too. ps help

    yes i have connection. its solved already thanks to
    watanabe_apple
    This solved my questionRe: Install apps from AppStore after update ios6 is not working 
    Sep 25, 2012 9:26 AM (in response to pkruitz)
    1) Quit App Store in multi-tasking.
    •From the Home screen, click the Home button twice.
    •Tap and hold on the app.
    •When it starts to jiggle, tap the red in the top corner to close it;
    ***Please close all open apps on your phone***
    2) Tap Settings.
    3) Tap Safari.
    4) Tap Clear History.
    5) Tap the Clear History button.
    6) Tap Clear Cookies and Data.
    7) Tap the Clear Cookies and Data button

  • Hey,... My battery extremely drained after update the last iOS, My iphone must be charged less than 7 hour,.... How could it be?

    Hey,... My battery extremely drained after update the last iOS, My iphone must be charged less than 7 hour,.... How could it be?

    Hey,... My battery extremely drained after update the last iOS, My iphone must be charged less than 7 hour,.... How could it be?

  • I did the new update and now my music wont play through speakers

    help I did the update and now music wont play or text sounds dont work

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

    SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

Maybe you are looking for