Must I have Numbers 2 in order to run 3?

Just to free up some operating space, I deleted previous version of Numbers. Now Numbers, the latest, won't open...
Do I need to reinstall older versions to run the latest?
ks

Numbers 2.3 is not required to run Numbers 3.x. I would have advised againsts removing Numbers 2.3 until several other items are fixed. Wheat happens when you try to launch Numbers3.x?

Similar Messages

HT6114 I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS. Since this OS is fairly old, what steps must I follow to get my computer up to date? I seem to recall hearing that it may take several

I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS. Since this OS is fairly old, what steps must I follow to get my computer up to date? I seem to recall hearing that it may take several steps and may require new versions of iWorks and iLife (at least)

The relevant information is:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.93 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
Chipset Model:          NVIDIA GeForce GT 120
Type:          Display
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0655
Revision ID:          0x00a1
ROM Revision:          3370
Displays:
iMac:
Resolution:          1920 x 1200
Depth:          32-Bit Color
Core Image:          Hardware Accelerated
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Built-In:          Yes
Display Connector:
Status:          No Display Connected

I have Numbers 2.3 installed on my IMac and have created several spreadsheets when I try to open the latest one I get a message "You need a newer version to open this spreadsheet. Do have to buy the new one and will it work with my OS - 10.8.5?

Do I have to purchase the new Numbers to replace my version 2.3 in order to open spreadsheets already created? Will the new version work with my OS - 10.8.5?

If you are running Mavericks, and the Mac App store says you are up to date, then you have Numbers 3.2 as well as Numbers 2.3. You are getting the "Need a newer version message because your Mac is trying to open the document using Numbers 2.3.
Launch Numbers 3, then open the document from within that app, or right click/control-click the document and choose Open with Numbers 3.x.
Regards,
Barry

Keep Quote line item numbers in Sales order

While creating a Sales order from Quote, SAP always creates line items with 100,200,300...and so on.
If quote has 3 line items say 100,110, & 120 and we create a sales order with reference to this quote in VA01. The sales order line items become 100,200 & 300.
The requirement is for Sales order to also have same line item numbers i.e. 100,110 & 120.
To retain quote line item numbers in Sales order the ABAP change will be in VOFM or user exit?

Hi,
It is not a straight forward thing. Adding data to table XVBAP won't work. It will create inconsistency. There are so many other tables involve here too, like, VBPA, VBUP, VBKD, KONV. There can be other tables too based on how your sales order is configured.
Also, modifying these tables (XTAB, YTAB ) in this user-exit may cause database inconsistency.
Regards,
RS

I have numbers on mac mini and need to email as an attachment one sheet instead of the 30. Can this be done

Can anyone help please. I have just downloads the numbers app. I have a very large document of which i need to send a separate sheet each week as an attachment via email. Can this be done?. Sadly, I am used to Neo and that was rather easy to do. I could not find the answer for excell either! Surely, saving each sheet separately is not the only answer.

File > Print
set the print range "From " = 1, "To" = 1 in the print dialog, then
click the "PDF" button the bottom left and select "Mail PDF"
If you must send a Numbers document, then I think I would copy the germane content into a new document and save as the current month (or week), then attach that document.

Keep Original Position Numbers in Purchase Order Creation

Hi community, i'm trying to solve the following problem in purchase order creation using BAPI_PO_CREATE1:
I'm loading a file with several order numbers and positions to be created in R/3. This file has a structure similar to:
OrderNumber;PositionNumber;Material;Quantity;Unit;.......
The purchase order is created successfully, but i need to keep original position numbers in the order. i.e:
Supposing this input file:
1900;08;993322;10.00;KG.....
1900;13;994455;12.00;KG.....
the positions in purchase order are created as
00010
00020
But i need positions to be created as:
00008
00013
Any ideas?????
Thanks you for your cooperation
Leonardo

Hi Leonardo,
I doubt if that is possible.
You can have the configuration set up to set the Item Number Interval to step size like 5,10,15 etc,
based on this value, your line item number will be
5,10,15,20...
10,20,30,40..
15,30,45,60
etc.
to set this value, you should go to SPRO.
Material Management->Purchase Order->Define Document Types
Regards,
Ravi Kanth Talagana

I have deleted a sales order,how to retreve the same document number

Hai,
I have deleted the sales order,so that document number is out.When i craete the next order will i get the same number which i have already deleted.
I want the same number again,for that what should i do...
I dont want that number be missed,the reason is there should be a flow in number,with out missing some numbers in between.
Thx
Venu
Edited by: venugopal on Aug 6, 2008 9:12 AM

Dear Venu
Yes this is possible but should not hand over the responsibility to end users.
B4 implementing this in production, please test a document and proceed.
Go to VOV8, select your order type and execute. There see what numeric value is maintained against the field "No.range int.assgt". Now go to VN01, [click on Status] tab and go to that number. On your right, you can see the last generated sale order number with editable option. You can change it.
For example, if your last created sale order reference is 805, you will see this 805 in the above area. Change it to 804 and save. Now if you create a new order, the reference of that particular sale order will again be 805.
But as I already mentioned, each and every time, you need to go and change this area which is not recommended.
thanks
G. Lakshmipathi

A JRE or JDK must be available in order to run Eclipse

Hello Colleagues ,
I have started with the SAP HANA Basics course offered at OpenSAP .
I am at my first steps for Installing Eclipse .
Please refer to the following link :-
http://hcp.sap.com/developers/learningtutorial111.html
After Downloading Eclipse , i tried to ran the exe file .
"I got an error A Java Runtime Environment(JRE) or Java Development Kit(JDK)
must be available in order to run Eclipse .No Java Virtual Machines were found after searching the following locations".
Please let me know if I am missing something ?
Regards
Nitin

Thanks for all the Replies to my original post
When u start Afresh to Learn SAP HANA and installing the tools on 64 -bit windows :-
Step 1 : Install JDK or JRE .
I found a link to share :
http://www.oracle.com/technetwork/java/javase/downloads/jdk7-downloads-1880260.html
Step 2 :
Once you are done with installation, set the env variables. Right click My Computer> properties> Advanced settings->Envoirmental Variables
Add two system variables:
E.g. if you have installed JDK . Its rests in the following path
JAVA_HOME: c:/program files/java/<jdkfoldername>
CLASSPATH: %JAVA_HOME%/bin
In My case
Step 3 : Download and Unzip
sapjvm-7.1.018-windows-x64.zip
Step 4 : Download and Unzip neo-javaee6-wp-sdk-2.34.16.1.zip
Inside your Folder DRIVE:\<Folderpath>\eclipse-jee-juno-SR2-win32-x86_64\eclipse
eclipse.exe file would be there run it .
Create workspace and start using .
Cheers
Nitin

Is there a way to have numbers in a row show below your slideshow rather than thumbnail images?

I'd like to have just a row of numbers for the viewer to tick through, rather than thumbnail images, to save space around my slideshow...have checked the counter but that must not have been the thing

Hello,
Slideshow thubnails won't accept anything else apart from images. Slideshows only accept images. Use compositions if you wish to insert text etc.
Cheers
Parikshit

Connecting to SAP from VB. Is it MUST to have SAP installed in the machine?

Hi All,
I have a requirement to connect to SAP from VB. I did it by creating an RFC and a Bapi for that. Now, I could execute the SAP function from VB based application. I have no issues so far.
But, when I try to execute the same from the system which doesn't have SAP installed in it, it couldn't execute. Is it MUST to have SAP installed in the machine to execute the SAP function from VB..? or is there any otherway to avoid this problem. Is there any way to execute the SAP function from VB from the machine which doesn't have SAP installed in it.
Please give me your valuable inputs. Thanks in advance,
Thanks & Regards,
Pradeep.

Hi,
No need of SAP environment to execute, but you should provide all the necessary parameters in your application in order to execute the RFC function module like: target host, m/c no, and etc of the SAP server.
best regards
Mahesh

Changing section numbers depending on order

I work on a lot of documents that have numbered sections. These sections are headed by "Section Title: Section Number" on the initial page and "Section Title: Section Description" on subsequent pages of that section. My problem is that frequently the names of the sections change as well as the order that they're in.
I set up custom text variables for the section titles. That seems to work well enough. I can go in and change the variable which changes all instances of it in that section. My bigger problem is that whenever a section get reordered I have to go in and manually update all the section numbers.
Is there a solution to this? Thanks in advance.

Does the section number appear on the document page somewhere, like in a heading? You'd normally pick up smething like that using a Running Head type variable, which can be set to pick up either a paragraph style (so it grabs an entire paragraph) or a character style (limited text). You can apply character style that is nothing but a name, with no acutal attributes, to selected text to make it work in the variable, if you need to.
You also have the choice of first on page or last on page. If there is no text on the page with the style, ID looks backwards through the document until it finds the first instance to use.

CIF error: Slave activity must not have any i/o node

Hi,
When I activated the integration model of orders, an error 'Slave activity must not have any i/o node' occurred.
I don't know why this error occurred.
By the way, what's the meaning of 'slave activity' and 'i/o node'?
Thank you very much.

Hi DB49,
I'm new to SCN while the error occurred several months ago, so I cannot remember the message number. I only had a screenshot below.
Outbound Queue Blocked
System: OD1CLNT120 User: WANGRUIB 2013-12-12 14:22:32
Function/Q: /SAPAPO/CIF_ORDER_INBOUND
Text: Slave activity must not have any i/o-node
I'm sorry it's in Chinese.
The scenario is:
1. The APO has already connected with one ECC;
2. I connect another ECC with the same APO;
3. The order model contains planned orders, sales orders, production orders, POs and PReqs;
4. When I activate the model, the error occurs.
I hope this is useful for you.
Best Regards,
Rui

HT1040 I must not have chosen a hard back book when I started my project of creating a photo book. When I go to buy the book it only allows a small soft cover book. How would one go about changing it to a hard back book?

I must not have chosen a hard back book when I started my project of creating a photo book. when I go to buy the book it only allows me to buy the small soft cover book. How would one go about to chage the settings?

What version of iPhoto?
THe basic answer to duplicate the book as things may change when you change size, select themes again and pic the cover and size you want -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Trying to email customers who have only placed one order.

Im trying to create a report of my customers who have only placed one order in the past so I can create an email campaign. This will help me with customer retention.
If any knows how I can create a report that will filter out customers who have placed more than one order, please let me know.
Thank you
Sam Hashem
www.Hashems.com

Hi Sam,
Unfortunately we do not have a filter that will pull only customers who have one order.
The only workaround is to produce a "customer & orders" report and export. Then in Excel filter the report by customers to see how many orders each customer may have. If more than one you can simply remove them from the exported report.
Then you'll take the updated report and import as a new mailing list (must match the marketing list import template) to acheive what you require.
Kind regards,
-Sidney

Must I have a MAC to submit an app with the digital publishing suite to Apple

Must I have a MAC to submit an app with the digital publishing suite to Apple

Yes.
http://www.adobe.com/products/digital-publishing-suite-single/faq.html
"When will DPS App Builder for Windows® be available?
Currently DPS App Builder is available only as a Mac OS application, which means that in order for Single Edition customers to submit an app to the Apple App Store, they need access to a Mac. To learn when DPS App Builder is available for Windows, check the Digital Publishing Suite system requirements."
http://www.adobe.com/products/digital-publishing-suite-single/tech-specs.html

Must I have Numbers 2 in order to run 3?

Similar Messages

Maybe you are looking for