Must my BC for my Tables be related in the Package.Module?

Hi,
To create an application with related pages/tables, must my Modules be in a 'parent/child' setup in the Package.Module? If not, How do I keep the pages related to eachother (i.e. customer, phone, etc)?
Any help would be greatly appreciated!
Rob

In addition:
I am using viewlinks that carry over into enabling Master/details for the BC inside the Pakcage.Module. Else, viewlinks don't work. So I end up creating a
master-Detail-Detail-Detail-etc. with say Customer as the Master. If I wanted to start a search say on Address, I need to set up a whole new Master-Detail-Detail-etc so the Address can "drive" the data. If this is the route I have to take to create a flexible application, I will have redundant .jsp pages. This will cause problems when an update needs to take place on a page becuase there will be multiple copies throughout the applicaiton. Can I pass parameters between Masters so that they can all take a Master or Detail role in the application? if so, how can I?
I hope I expained well becuase I appreciate any help you can offer.
Thanks,
Rob

Similar Messages

  • How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows.  The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

    I cannot make these directions work
    I downloaded media on Overdrive MEdia on my PC
    I have the overdrive media ap on my I pod touch 4g
    this media is suppossed to be compatible w/I pd touch
    Notes on Transferring OverDrive MP3 Audiobooks…
    Most MP3 capable devices should play OverDrive MP3 Audiobooks.
    If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
    iTunes® v9.0.2 (or newer) is required.
    The Apple device must be formatted for use with Microsoft® Windows®.
    The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
    Connect the iPod® to your computer.
    If it does not launch automatically, open iTunes v9.0.2 (or newer).
    In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
    The 'Summary' screen is displayed. 
    Place a checkmark next to 'Manually manage music…'.
    Click the 'Apply' button.
    The iTunes 'Summary' screen refreshes, and the changes are saved.
    If desired, close iTunes.
    Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Also you said " I want to add them to my iCloud, and also back to my computer.   " Note that unless  subscribe to iTunes match, only iTunes purchases are stored in iCloud.
    Also,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Table to find out the function modules used in a particular program

    Hi,
    Is there any standard table to find out the function modules used in a particular program?
    Such as there is a table D010TAB to find out the tables used in a program .

    Hello
    There is no exist such table.
    But try this snippet:
    REPORT ZSEARCH.
    PARAMETERS: P_NAME LIKE D010SINF-PROG.
    DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
    DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
    DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
    DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'RS_GET_ALL_INCLUDES'
         EXPORTING PROGRAM    = P_NAME
         TABLES    INCLUDETAB = INCL.
    LOOP AT INCL.
      READ REPORT INCL-MASTER INTO TMP.
      APPEND LINES OF TMP TO PROGTXT.
      REFRESH TMP.
    ENDLOOP.
    READ REPORT P_NAME INTO TMP.
    APPEND LINES OF TMP TO PROGTXT.
    LOOP AT PROGTXT.
      IF PROGTXT CS 'CALL FUNCTION'.
        SEARCH PROGTXT FOR ''''.
        IF SY-SUBRC = 0.
          DO.
            SHIFT PROGTXT LEFT BY 1 PLACES.
            IF PROGTXT(1) = ''''.
              SHIFT PROGTXT LEFT BY 1 PLACES.
              DO.
                SHIFT PROGTXT RIGHT BY 1 PLACES.
                IF PROGTXT+71(1) = ''''.
                  SHIFT PROGTXT RIGHT BY 1 PLACES.
                  CONDENSE PROGTXT.
                  FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
                ENDIF.
              ENDDO.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
      ENDIF.
    ENDLOOP.
    SORT FUNCT.
    LOOP AT FUNCT.
      WRITE: FUNCT. NEW-LINE.
    ENDLOOP.

  • [svn:fx-trunk] 12936: -make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552

    Revision: 12936
    Revision: 12936
    Author:   [email protected]
    Date:     2009-12-14 19:40:23 -0800 (Mon, 14 Dec 2009)
    Log Message:
    -make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552
    -remove (from svn) the en_US/docs directories for textLayout because these directories and dita files are created by asdoc in the doc target
    -updated the main build.xml to not include the playerglobal project
    -updated fat-swc targets in osmf,automation_spark,automation_flashflexkit,automation,airspark, and textlayout to remove the doc directory.
    QE notes: make sure copylocales works properly
    Doc notes: no
    Bugs: SDK-24552
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24552
        http://bugs.adobe.com/jira/browse/SDK-24552
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/projects/airspark/build.xml
        flex/sdk/trunk/frameworks/projects/automation/build.xml
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
        flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
        flex/sdk/trunk/frameworks/projects/osmf/build.xml
        flex/sdk/trunk/frameworks/projects/textLayout/build.xml
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/airframework/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/automation/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/automation_spark/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/framework/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/rpc/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/textLayout/bundles/en_US/docs/

    Well, I've tried compiling a package and I have modified the PKGBUILD file to look like this now. (Keeping it as simple as possible)
    pkgname=dvbcut-svn
    pkgver=16
    pkgrel=1
    pkgdesc="DVBCUT-svn is an application that allows you to
    edit MPEG files. ie: Remove TV ads. (SVN version: Fri, 01 Dec 2006)."
    url="http://dvbcut.sourceforge.net"
    depends=('qt' 'libao')
    makedepends=('subversion' 'scons')
    conflicts=('dvbcut' 'ffmpeg')
    provides=('dvbcut')
    source=()
    md5sums=()
    _svntrunk=https://svn.sourceforge.net/svnroot/dvbcut/trunk
    _svnmod=dvbcut
    build() {
    cd $startdir/src
    svn co $_svntrunk --config-dir ./ -r $pkgver $_svnmod
    cd $_svnmod
    msg "SVN checkout done or server timeout"
    msg "Starting make..."
    make || return 1
    # vim:syntax=sh
    I then run makepkg PKGBUILD and let it do its thing
    It ends with this...
    scons: done building targets.
    ==> Removing info/doc files...
    ==> Compressing man pages...
    ==> Stripping debugging symbols from libraries...
    ==> Stripping symbols from binaries...
    ==> Generating .PKGINFO file...
    ==> Generating .FILELIST file...
    tar: *: Cannot stat: No such file or directory
    tar: Error exit delayed from previous errors
    ==> Compressing package...
    tar: *: Cannot stat: No such file or directory
    tar: Error exit delayed from previous errors
    ==> Finished making: dvbcut-svn  (Sun Jan 21 19:08:28 UTC 2007)
    I'm not sure what's causing this error message.
    tar: *: Cannot stat: No such file or directory
    tar: Error exit delayed from previous errors
    I'll try installing it and see how it goes.

  • I get this error : "content filter of a source for logical table" while I run the Global consistency check.

    ERRORS:
    Business Model DAC Measures:
    [nQSError: 14031] The content filter of a source for logical table: D_END_TIME references multiple dimensions.
    [nQSError: 15001] Could not load navigation space for subject area DAC Measures.
    Thank you!

    Yes ! My Task Hierarchy has 3 dimension tables that form a hierarchy :Execution Plan -> Tasks -> Detail
    All the 3 levels in the hierarchy are 3 different dimension tables.

  • Query for retreiving table names that have the same data

    Hi,
    Does anybody know how to retreive all the table names that have the same data in their respective tables but i dont know the table names or its fields. Is there any possible query to perform this action???
    Thanks in Advance,
    Balaji.

    What about...
    WITH manager_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id
      AND   m.name = :P_MANAGER)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    ), all_list AS
    SELECT name,
            LTRIM(MAX(SYS_CONNECT_BY_PATH(id,','))
            KEEP (DENSE_RANK LAST ORDER BY curr),',') AS employees
    FROM   (SELECT m.name,
                    e.id,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) AS curr,
                    ROW_NUMBER() OVER (PARTITION BY m.name ORDER BY e.id) -1 AS prev
             FROM   manager m,
                    join_table jt,
                    employee e
      WHERE m.id           = jt.manager_id
      AND   jt.employee_id = e.id)
      GROUP BY name
      CONNECT BY prev = PRIOR curr AND name = PRIOR name
      START WITH curr = 1
    SELECT a.*
    FROM   manager_list m,
           all_list a
    WHERE  m.employees = a.employeesWould be easier in 11g, but I don't have an installation here so this is based on 10g.
    Cheers
    Ben

  • AET for CRM 7 not defaulting in the Package...[RESOLVED]

    We introduced a new config/development client several weeks back and now all development/config takes place in client 010 rather than client 100. However, today is the first time that I have needed to use the AET tool to create a new field. When doing this I get to select the object that is affacted (ACCOUNT), but notice that the Package is NOT automatically populated, and, as the field is grayed out does not allow me to populate one. However, I obviously can't continue any further without a Package having been defined.
    As a test, within client 010 I created a new package, thinking that maybe it was because our default package was originally created in client 100, but this did not work and still the no package was defaulted in. Plus, we have developed components and views in clilent 010 without any trouble.
    Has anyone seen this particular issue before and know of a solution. I have had a quick look for an OSS note, but to no avail.
    Jason
    It would seem that we needed to allow the package to be extended.
    SPRO ->CRM->UI framework-> UI framework definiton->Application Enhancement Tool ->Define system settings

    See post for resolution...

  • What is the iPhone 4S packaging made out of and where does apple get its materials for it. Also where is the packaging manufactured?

    I need to know what the iPhone 4S packaging is made of and where the materials are brought from to make that packaging. And I would also like to know where this is all manufactured. And please dont just send me links...thnx

    You don't want links, but I'm giving you links. Do your own research.
    http://images.apple.com/environment/reports/docs/iPhone_4_Product_Environmental_ Report.pdf
    http://en.wikipedia.org/wiki/Foxconn

  • Is the  color space conversion needed for optimal uploads to Blurb using the book module automatic?

    Just uploaded my first book to Blurb  using the module in LR4. Blurb recommendations are to upload sRGB if using their software, or to convert to their cmyk profile if using Indesign or a pdf workflow ( I think).
    So, I hope that the proper conversion is done automatically when uploading using the new book module. I uploaded a mix of edited raw nefs, edited tifs, psd's, jpegs which normally I would convert upon export to srgb to use in the stand alone booksmart app with great success color wise.  I'll see my new books in a couple of weeks, but I'd like to rest easy till then.

    Yes, the direct export sends sRGB to Blurb.

  • How to set_value for non-table items.

    I have a form, based on scott.emp, with a button and three fields, empno, ename and xxx. The empno and ename fields are based on the scott.emp table, whereas the xxx field is a non-table based field.
    Setting xxx text type to either a text area or text box makes no difference.
    The following code in the buttons PL/SQL Button Event Handler, Custom section results in a (WWV-00000) error.
    begin
    p_session.set_value(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_XXX',
    p_value => 'Hello');
    end;
    However, if I change the p_value to ename, a table based item, the code works as expected.
    I ran across a post that had the following link
    Re: transactions
    Regarding setting values for non-table items. Unfortunately, the post was made prior to the latest discussion forum reorganization, so it's no longer valid.
    I would appreciate any help on the problem.
    Thanks, Larry

    Hi,
    Try using set_value_as_string
    begin
    p_session.set_value_as_string(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_XXX',
    p_value => 'Hello');
    end;
    Thanks,
    Sharmila

  • How to create view for xmltype table in oracle

    hi:
    Can some one help me how to create view for xmltype table in oracle?
    XMLType do not have column
    Sem

    Thank you !!
    I read it and become very hard to implement what I want to do.
    Can you give me example please?
    My main goal to create view for xmltype table is to XQuery the XML data?
    Do you have any other suggestion?
    Please help
    Ali_2

  • "RUNSTATS and REORGCHK for single table" in DB13

    Hello,
    Our system is ECC 6.0, SAP_BASIS is SAPKB70011.
    "RUNSTATS and REORGCHK for single table" in DB13, I found the parameter, "Parallel Jobs".
    Why there is this parameter? Can we execute parallel runstats for single table in SAP environment?
    Thank you very much and best regards,
    Takae.

    Hi Takae,
    Although this DB13 job is named '.. for single table' it can process more than 1 table if you use wildcards. And only in this case parallelism makes sense, because the job cannot parallelize the runstats for one table but only parallelizes the runstats execution for different tables. Technically this is done be creating further background jobs in the SAP system.
    Best regards
    Ralf

  • "db file scattered read" too high and Query going for full table scan-Why ?

    Hi,
    I had a big table of around 200mb and had a index on it.
    In my query I am using the where clause which has to use the
    index. I am neither using any not null condition
    nor using any function on the index fields.
    Still my query is not using the index.
    It is going for full table scan.
    Also the statspack report is showing the
    "db file scattered read" too high.
    Can any body help and suggest me why this is happenning.
    Also tell me the possible solution for it.
    Thanks
    Arun Tayal

    "db file scattered read" are physical reads/multi block reads. This wait occurs when the session reading data blocks from disk and writing into the memory.
    Take the execution plan of the query and see what is wrong and why the index is not being used.
    However, FTS are not always bad. By the way, what is your db_block_size and db_file_multiblock_read_count values?
    If those values are set to high, Optimizer always favour FTS thinking that reading multiblock is always faster than single reads (index scans).
    Dont see oracle not using index, just find out why oracle is not using index. Use the INDEX hint to force optimizer to use index. Take the execution with/witout index and compare the cardinality,cost and of course, logical reads.
    Jaffar
    Message was edited by:
    The Human Fly

  • Why do we create indexes for DSOs and Cubes.What is the use of it?

    Hi All,
    Can you please tell me why are indexes created for DSOs and Cubes.
    What is the use with the creation of indexes.
    Thanks,
    Sravani

    HI ,
    An index is a copy of a database table that is reduced to certain fields. This copy is always in sorted form. Sorting provides faster access to the data records of the table, for example, when using a binary search. A table has a primary index and a secondary index. The primary index consists of the key fields of the table and is automatically created in the database along with the table. You can also create further indexes on a table in the Java Dictionary. These are called secondary indexes. This is necessary if the table is frequently accessed in a way that does not take advantage of the primary index. Different indexes for the same table are distinguished from one another by a separate index name. The index name must be unique. Whether or not an index is used to access a particular table, is decided by the database system optimizer. This means that an index might improve performance only with certain database systems. You specify if the index should be used on certain database systems in the index definition. Indexes for a table are created when the table is created (provided that the table is not excluded for the database system in the index definition). If the index fields represent the primary keys of the table, that is, if they already uniquely identify each record of the table, the index is referred to as an unique index.
    they are created on DSO and cube for the performance purpose ..and reports created on them wil be also more efficent ..
    Regards,
    shikha

  • XSLT Related to the mapping part.

    Hello all ,
    Can You send me the Details related to XSLT for Mapping and Links Related to the same.
    Thanks,.
    Srinivasa

    HI Srinivas
    Go through these
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
    Some scenarios
    /people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    see the below links
    XSLT Mapping
    /people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
    /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    XSLT Mapping with java enhancement
    /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
    XSLT - /people/dirk.roeckmann/blog/2006/07/26/grouping-xml-with-xslt--from-muenchian-method-to-xslt-20
    Dynamically sending a mail to the PO creator using XSLT- ABAP Mapping -
    /people/rahul.nawale2/blog/2006/11/01/dynamically-sending-a-mail-to-the-po-creator-using-xslt-abap-mapping
    xpath functions in xslt mapping -/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
    Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
    Using XSLT Mapping within the J2EE Adapter Framework -https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3823 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
    Cheers..
    Vasu
    <i>** Reward Points if found useful **</i>

Maybe you are looking for

  • Creating a new library

    I have a question about creating a new library by holding the shift button and starting iTunes. What exactly does this do? What I'm hoping will happen is that it will allow me to remap the location of my iTunes music folder without actually creating

  • How can I see pictures not imported using iphoto within iphoto?

    I just got a new iMac and am converting over from a Dell PC.  I have thousands of pictures that I copied over.  I then synced my ipad and all those pictures imported using iPhoto.  I liked the ability to see Events and Faces and ws thinking I might l

  • Tnsping is not working in client

    Hi All, I have restored 2 databases from cold backup in SUSE Linux with Oracle 9i. Listener.ora is started sucessfully. tnsping is working in server machine. But same tnsping is not working client machine. Client is windows platform. I following erro

  • Oracle profile and password limits

    Hi there, I don't understand what's limiting my password selection. It appears that the profile is default and doesn't have limitations. Any help would be appreciated. Thanks db2> alter user system identified by "xxxxx"; alter user system identified

  • Private data members vs. local variables

    Hi This is more of a basic design question. I have a code that retrieves a lot of data from a text file and puts them into the database. I have one function per table for inserting rows which are called from various functions in the code. I have all