Mute single frame of audio

Hi all,
I'm a novice Flash user so bare with me, i'm trying to mute a single layer of Audio when a button is clicked.
The idea being that some of the audio will continue to play throughout the Animation but when the button is clicked the main audio (backing music) will be muted/disabled.
So does anyone know some script to Disable a specific layer or mute a layers sound?
I'm working in a AIR for IOS document, using ActionScript 3 in Flash Pro CC.
Any help is much appreciated.
Thank you.

you cannot differentially control the sound on one layer vs the sound on another layer.  you could control the sounds in different movieclips, but it's easier to use the sound class to control your sounds and attach no sounds to timelines..

Similar Messages

  • Videos now single frame with audio only

    My 30g video Ipod's videos now show up under music. When I try to watch them they are just a single frame and I get the audio. The videos are fine when viewed with Itunes. How do I get my videos back to normal videos???

    correction: it works fine on my ipod when I have the "TV out" setting set to "off", but I'm only getting audio on my TV when I have the setting "TV out" set to "on." It has worked fine in the past.

  • Compressor 4.1.1 dropping frames of audio

    When a video is compressed using Compressor 4.1.1 we are seeing single frames of audio dropping at random points in the compressed video. In each of these screen shots the original prores video is the middle track, the bottom track is the first time trying an encode, and the top track is the second time trying the encode. They are going from ProRes 422 1920x1080 to h.264. This happens regardless of the destinatin resolution. The video is uneffected.

    We've been having the same problem, with one difference.  The dropouts aren't happening at random points, they are happening right where the segments are stiched back together.  If I see for example that Compressor is breaking the piece into 3min segments to process, I know I'll have to check for dropouts at the 3min, 6min & 9min points in the final m4v.  (Though in truth, there is not a dropout at every stich point, but quite a few).  We have had this happen not only when using multiple computers, but when simply using multiple instances on our 12-core Mac Pro.

  • Single Frame Displays on External Monitor

    I have been searching online for the past three hours, trying to find a solution to this. I have found threads describing similar problems, however, I have done everything suggested in those threads, and nothing seems to work. I am at my wit's end.
    The problem: When I attempt to play my sequence in my timeline, while connected to an external monitor, then audio plays, but only a single frame shows on the monitor. It updates to the most current frame whenever playback stops, but it only shows a static image. Meanwhile, the canvas window in Final Cut Pro displays nothing.
    Things I Have Tried:
    I have selected "All Frames" under View > External Video.
    I have Refreshed A/V Devices.
    I have made certain that the Canvas display size is small. Currently, it is at 50%, and I have also tried setting it to Fit To Window.
    I have gone to Easy Setup, and selected NTSC, DV-NTSC.
    I have checked "Mirror On Desktop" under Audio/Video Settings > A/V Devices > Playback Devices.
    I have also tried unchecking "Mirror on Desktop."
    I have set Video Playback to Apple Firewire NTSC (720 x 480).
    I have set the Sequence Preset to DV NTSC 48 Khz.
    I have set the Device Control Preset to Firewire NTSC.
    I have exited Final Cut Pro, made sure the deck was on first, then turned on Final Cut Pro.
    I have restarted the computer.
    Further Notes: I've noticed that the problem might have something to do with how sequences are displayed. If I double-click on one of my video files in the Final Cut Browser, and open it in the Viewer window, it plays fine, even displays fine in the external monitor (my deck). Furthermore, if I open different Final Cut Projects that worked fine previously, they now have the same issue. So I would assume it is not a problem with the sequence in this current project I am working on.
    Any help you could give would be appreciated more than I can express.

    Have you set the sequence you're trying to play to DV-NTSC? It sounds to me like you're trying to play a sequence that is not a stock DV sequence through a DV device.
    Try creating a new DV-NTSC sequence, copying all the clips from your current sequence, and pasting them into the new sequence.

  • If I want to make a single-frame importer, e.g. - for WebP image format, do I need to implement an SDK importer plugin? Are there any examples?

    The title says it all really. Was wondering if there's a simpler interface to implement which does not contain video or audio, but just a still frame image.
    I don't care about exporting this format from Premiere, just being able to read a single frame or a sequence of frames to be used as footage.

    Hi Rotem,
    A standard importer plug-in is the way to go for a still image importer.  You could start from SDK_File_Import in the SDK.  There is also a WebM plug-in on GitHub:
    fnordware/AdobeWebM · GitHub

  • Single frame goes ungraded in middle of clip

    Hi!
    I'm having a curious case of a single frame (well a few, actually - however not one-after-the-other) that goes back to it's ungraded state in the middle of a graded clip.
    This is a screen recording of the problem - password is "sg"
    URL: https://vimeo.com/76040782
    Any ideas as to why this is happening?
    Footage is .r3d
    EDIT:
    Just realized this seems to happen on a few clip which I've earlier got the error: "Frame index is out of range" - so I've changed the reel timebase from "Deafault" to "Frame indices" to make the shot appear in the monitor.
    - still, I have no clue why this is happening and what to do about it, so any suggestions are welcomed

    Internal speakers....I'm out of the warranty period. I think I've identified the root of the problem...seems to be with clips whose audio is of a low sample rate...I rexported the clips from Mpeg Streamclip at 44.1 and it's ok now...unless that was a coincidence.

  • Slow video down to single frame, pause a few seconds, then speed back up?

    I'm working with a video clip where I'd like to show a single frame for a few seconds. I think I can figure out how to slow down the video for a second or two surrounding the desired frame, but I can't figure out how to pause or freeze it at that point.
    I'd like it to be fairly smooth on the slowdown, stop, and start up, I'll also have the audio slow down and stop, I think it will be a neat effect.
    Any good ideas?
    iMac 20"   Mac OS X (10.4.10)  

    I'd like it to be fairly smooth on the slowdown, stop, and start up
    A possibility is to use the Time Remap free filter. Use the default Mode (Variable Speed) and keyframe the Speed control from 100% to 0% on the frame you want still, and back to 100%. You can also use the Smooth contextual command on the 0% keyframe to get a smooth speed change.
    What the filter does not do, though, is to change the audio speed...
    Piero

  • External Video - No longer plays video...? Only shows single frames

    Hey all - thanks for stopping by! I am hoping for help as soon as possible!
    So I've been doing fine on my project up until I did the FCS 2008-03 update today... ugh (I know I shouldn't have).
    I use 2 monitors; one for my timeline, etc. the other for full screen playback. It's worked swimmingly for the past month. Now, it will only play a single frame back - wherever my playhead is, generally. But takes a second to refresh.
    I have external video set to "all frames" and have refreshed the external devices, restarted, reverted to QT 7.5, etc.
    What can I do to get back to where it was working?
    A black magic card is installed but I'm not capturing anything right now. Will that still affect it?
    Thanks to all who stop by
    Specs:
    FCP 6.0.4
    QT 7.5
    10.4.11
    G5 2GHz
    2.5 GB DDR SDRAM

    Try all these?
    Shane's Stock Answer #8: External Monitor Viewing
    CUTTING SO YOU ONLY SEE THE TROUBLESHOOTING THINGS
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
    Shane

  • Converting a single frame swf to a gif

    I have a couple of really cool animated 'shockwave flash
    movie windows projector' images that i would love to convert into
    animated gif's so that I can edit them to work in a theme I'm
    designing for my sony ericsson w580i. I was finally able to convert
    the exe files into swf's... but that didn't really do me any
    good... same issue. Also upon further scrutiny I discovered that
    both animated file types have only 1 frame! What should I do?!
    Please help!!

    I've experienced the same thing sometime long in the past,
    and I probably did a frame by frame Print Screen to get around it.
    If it's single frame swf, then that's probably all you're going to
    get is one frame as an output.
    You may be able to incorporate a jpeg encoder of some sort to
    take snapshots as the piece animates in some form of loop fashion,
    but I'm not savvy in that dept.

  • How to use single frame in a page

    Hello, i would like to now how to make a frame in a page
    without having two or more, i was used to work with GoLive and
    there i could use the grid an put a single frame and make links to
    other pages that would open in that frame, it worked wel for me,
    but since I switched from golive to dreamweaver CS3 i am not able
    to do so. Is there some one how could tel me how to do so, since i
    use a lot of single frames in my pages,
    greetings

    why are you wanting to use single frames?
    They allow having the initial frame address stay in the
    address bar, and not
    show the linked page's address. The problems they cause
    usually override any
    value.
    Or- if we aren't using the same words the same way, please
    give an example
    site of what you want to do.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • HT200044 how to export a single frame in 10.0.6 - I cannot find option?

    With 10.0.5 There was an option on "share" to pick a single frame from the timeline and export the image as a JPEG or other formats.  I do not find this option on the new version.

    It works now, you need to go back to share and a new option is available that was created by the step you mentioned, listed as share frame one -- when selected, this allows for exporting the frame to the desktop!
    Thanks.
    Jon

  • What's the simplest way to export a single frame from an animated gif as gif?

    i have an animated gif and wish to save a single frame as a non-animated gif.
    in the past i've been achieving this by deleting all the frames i don't wish to export and deleting them before exerting, this seems very clumsy though so i figure there's a more sensible solution in there somewhere, but where?

    Thanks, Bill! Actually version 9 looks a little clearer than that, as it has two bold clear white paddles to mark the edge of the work area.
    I was a little frustrated at first, because whatever I did, it still took a year and exported the entire video.
    Then:
    I caught sight of this teeny tiny box waiting for a tick from me, which said:
    Share Work area Bar Only
    We have lift-off 
    Thanks again. So much quicker than all that deleting ahnd hoping you don't accidentally say "yes" when prompted to save changes!

  • Mouse over HTML link causes single frame to display at top of page Netscape only

    Having a wierd problem. When you run the mouse over HTML
    links on the page a single frame of the flash movie apears at the
    top center of the page. It only happens in netscape in firefox
    mode. IE, Opera, and Firefox do not have the problem.
    Problem site
    Thanks in Advance,
    Vorsch

    The problem goes away if i modify my .css file by removing
    the
    border: 1px solid #999999;
    line from the "a:hover" style.
    I ran my css file thru the validator at w3c and its fine. The
    Page also validates as xhtml transitional.
    and just a note the same file version is on my public server
    and my testing server.
    Has anyone ever seen this before?? I have several sites with
    a:hover effects and flass media and have never run across this
    before.

  • How do I position to panels in a single frame?

    Hi,
    Can someone tell me how i can position two panels in a single frame using the BorderLayout class.
    I have included my code below. When it is run it shows two JPanels positioned at the top and the bottom, a text area to the right, a panel in the center and a panel on the left. I want to get the panel on the left - the yellow panel - to be positioned in the lower third of the center panel. I have tried to use the BorderLayout.SOUTH statement - but this positions the panel across the very bottom which causes the bottom JPanel and part of the text area to disappear.
    Can anyone help with this please???
    Many thanks
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class Panels extends JFrame implements ActionListener
         private TopPanel topPanel;
         private BottomPanel bottomPanel;
         private JButton open;
         private JButton close;
         private JButton connect;
         boolean openClicked = false;
         boolean closeClicked = false;
         public Panels()
              super("Panels");
              setSize(1000,600);
              setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              setVisible(true);
              Container contentArea = getContentPane();
              topPanel = new TopPanel();
              bottomPanel = new BottomPanel();
              JTextArea textArea = new JTextArea("Text Area",20,20);
              JScrollPane textScroller = new JScrollPane(textArea);
              open = new JButton("Open");
              open.addActionListener(this);
              close = new JButton("Close");
              close.addActionListener(this);
              connect = new JButton("Connect");
              connect.addActionListener(this);
              JPanel topBar = new JPanel();
              topBar.setBackground(Color.red);
              topBar.add(open);
              topBar.add(close);
              JPanel lowerBar = new JPanel();
              lowerBar.setBackground(Color.red);
              lowerBar.add(connect);
              bottomPanel.setPreferredSize(new Dimension(100,100));
              contentArea.add(topPanel);
         contentArea.add(bottomPanel,BorderLayout.WEST);
              contentArea.add(textScroller,BorderLayout.EAST);
              contentArea.add(lowerBar,BorderLayout.SOUTH);
              contentArea.add(topBar,BorderLayout.NORTH);
              setContentPane(contentArea);
    public void actionPerformed(ActionEvent e)
         if(e.getSource() == open)
         openClicked = true;
         topPanel.repaint();
         if(e.getSource() == close)
         {closeClicked = true;
         bottomPanel.repaint();
    class TopPanel extends JPanel
         public TopPanel()
         public void paintComponent(Graphics painter)
              super.paintComponent(painter);
              painter.setColor(Color.white);
              painter.fillRect(0,0,getSize().width,getSize().height);
              if (openClicked == true)
              drawTopMessage(painter);
         public void drawTopMessage(Graphics painter)
              painter.setColor(Color.black);
              painter.drawString("This is the top panel", 20,20);
    class BottomPanel extends JPanel
         public BottomPanel()
         public void paintComponent(Graphics painter)
              super.paintComponent(painter);
              painter.setColor(Color.yellow);
              painter.fillRect(0,0,getSize().width,getSize().height);
              if (closeClicked == true)
              drawBottomMessage(painter);
         public void drawBottomMessage(Graphics painter)
              painter.setColor(Color.black);
              painter.drawString("This is the bottom panel", 20,20);
    public static void main(String[] args)
         Panels example = new Panels();

    One solution would be to create a new panel, bothPanels and adding the two panels that you need to this panel.
    Once you have done that, you can add bothPanels to contentArea.add( bothPanels, BorderLayout.CENTER)
    hth

  • Concatenate two single frame swf's into one singleframe swf?

    Hi
    Is it possible to combine multiple swf's into one "single frame" swf?
    I have an flex application, that has a scroller with a swfloader inside, and the swfloader should load the "single frame" swf and it is possible to navigate up and down, via the scroller.
    Any help is appreciated.
    /Allan

    I've experienced the same thing sometime long in the past,
    and I probably did a frame by frame Print Screen to get around it.
    If it's single frame swf, then that's probably all you're going to
    get is one frame as an output.
    You may be able to incorporate a jpeg encoder of some sort to
    take snapshots as the piece animates in some form of loop fashion,
    but I'm not savvy in that dept.

Maybe you are looking for