Muvo Slim, sound only in one ea

Hi
I have this (huge i think) problem. When i am going to hear music with my Creative Muvo Slim player, there is only sound in the left earphone. I have just bought a new pair of earphones today, so i found out that, they weren't the problem. It's a little hard to explain but i actually can hear sound in both earphones IF i don't "plug" the cable all the way in to the player. You can kind of say that there is 2 clicks where number 2 is all the way in. If you plug it one click in and turn the cable a little around, i can hear sound in them both. But that just dosn't work, cause if i move then it stops working.
How can it be that this has happened, and what do i do? It's pretty frustration to be listening to music in only the left ear...
Rasmus

I have tried 2 pairs of earphones, and pair of headphones, the problem is there with them all. So i think i can pretty much conclude that the player is screwed. I'm going to send it in to get a new one. Anyway, thanks for you help ~

Similar Messages

  • Brand new Ipod touch G4 with sound only in one earbud

    I have a brand new Ipod touch G4 with sound only in one earbud.  I have tried different types of headphones, but get the same result.  If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
    I have an older Ipod g4 without this problem
    any suggestions?

    Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.

  • Iphone 4.Soundproblems. I have sound only in one canel, its dosents matter if it is earpluggs or iphonedock

    Soundproblems. I have sound only in one canel, its dosents matter if it is earpluggs or iphonedock. And the sound is very low

    Go to Settings-General-Accessibility , make sure the sound is balanced between left and right

  • Why do I have sound only in one headphone, stereo and docking station?

    Why do I have sound only coming out of one side of headphone, car, stereo and docking station when playing itunes?

    Try cleaning out the headphone jack with a cotton swab.

  • Sound only in One speaker

    Got a new computer with VIA KT333 KT3 Ultra series and loaded on Windows 2000 professional.  Everything works fine except can only get sound out of one speaker.  Tried re-installing the audio driver.  Tried all speaker configurations in control panel under multimedial.  Tried three different sets of speakers.  No warning in the system devices in control panel.  Thinking the MB may be bad.

    Hi,
    A couple of generic things you could try, but might not apply to your specific mobo.
    First, make sure that the plug is fully plugged in to the socket. Those 3.5mm plugs don't leave a lot of room for error, and sometimes a combination of the plastic on the plug and the metalwork surrounding the socket will prevent the plug from going in all the way. This is more likely to affect the right channel. (I assume that in trying 3 sets of speakers, there wasn't a common faulty lead involved).
    The second thing to look at depends on your computer setup. Many (but not all) MSI mobos have a 10 pin header called (for example) Front Panel Audio Connector: JAUD1. This lets you connect to an Audio Out socket on the front panel, as an alternative to the rear panel outlet. The audio outputs connect first to the the front panel (green) socket, with a return circuit for each channel which is automatically disconnected when you put a plug into that socket. So the audio out signals travel in lovely unshielded cable from the mobo to the front panel and back, before going to the back panel. If you don't have a front panel socket (and cable to suit), then you have to put a couple of jumpers across (for example) pins 5 & 6, and 9 & 10. If one of these jumpers is missing, you will only get one channel out. You could also lose a channel if there is a fault in the cable taking the signal from the mobo to the front panel, or the return cable, or in the switch contacts of the front panel socket (or in the rear panel socket contacts, for that matter).
    So, if you have a front panel audio out - try that and see if you get both channels. Also, check the wiring from JAUD1 to the front panel. You could also try removing the cable from JAUD1 and installing a couple of jumpers instead (check the mobo manual). If you don't have a front panel audio out, check that the 2 jumpers are on JAUD1. You could even try cross connecting the JAUD1 pins (5 to 10 and 9 to 6) and seeing if the missing channel changes or not.
    Also, try a few different audio sources (CD playback, playing .WAV or MIDI files, using Line Input - and check the advanced options in the Audio Mixer controls to make sure the Balance controls are centred.
    I hope this helps.
    Cheers

  • Sound only works one one headphone =(

    Hello I just bought a brand new hp pavilion dv6 computer with windows 7.. And I cant get the headphones to work properly! I only get sound on one headphone! I tried to update the drivers and I've tried to change to another pair but nothing works! Please help  

    - Apple will only exchange yur iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - A third-party place like the following is less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    - You can purchase and use a pair of Bluetooth headphones.

  • Alsa upgrade: sound only from one app [Solved]

    Hello,
    after upgrade to alsa 1.0.21 only one application can play sound. E.g. if MPD (using ALSA output) plays then any ather application (mplayer for example) cannot. Here's mplayer output:
    [AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy
    [AO_ALSA] alsa-lib: conf.c:4626:(snd_config_expand) Expand error (walk): File exists
    [AO_ALSA] alsa-lib: pcm_hw.c:1325:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Device or resource busy
    [AO_ALSA] Playback open error: Device or resource busy
    [JACK] cannot open server
    [AO SDL] Samplerate: 44100Hz Channels: Stereo Format s16le
    [AO_ALSA] alsa-lib: conf.c:4626:(snd_config_expand) Expand error (walk): File exists
    [AO_ALSA] alsa-lib: pcm_hw.c:1325:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Device or resource busy
    I've downloaded and compiled older alsa-{lib,utils} 1.0.20 from ABS. Now's everything fine.
    Last edited by cinan (2009-09-10 12:15:52)

    I had a similar issue with MPD blocking sound on ac97. Commenting out optional decelerations under audio_output in /etc/mpd.conf fixed it.
    /etc/mpd.conf wrote:audio_output {
            type            "alsa"
            name            "My ALSA Device"
            #device         "hw:0,0"        # optional
            #format         "44100:16:2"    # optional
            #mixer_device   "default"       # optional
            mixer_control   "PCM"           # optional
            #mixer_index    "0"             # optional

  • MSI K8T Neo2 - Sound only at one side.

    Hey guys,
    I just got my PC upgraded, when i got it back from the PC Store i reinstalled everything and such.
    Now here's the problem.
    I have to plug my headphones in the front side of my PC, now when plugging my Headphones in, i only get sound from one side, trying other drivers didn't succeed. Any suggestions?
    Setup:
    MSI K8T Neo2
    AMD Athlon64 3200+
    Kingston 2x 512 MB - Dual Channel
    2x Maxtor 120 GB
    ATi Radeon X800 Pro
    X-Gear Xyclops 400Watt Case
    Hope to have it fixed, can't game without proper sound
    Regards,
    ExO,

    Problem fixed, had to remove the connecters for the front side and had to place two jumpers(written in the manual).
    But does anyone know why the quality is so poor?
    I didn't have this on my old motherboard(also AC97) but there the quality was beter
    Oh well,

  • Airplay sound only showing one output unit

    Is there a way to show more than one airplay audio output unit (while holding down alt + click sound icon in menubar).
    I now have to go to sound settings to enable the other units. Seems unecessary.

    You aren't creating an array. You are giving the variable a string. Pipe $Users to Get-Member to see that it is a string.
    Here is an alternate way to do what you want
    Split-Path (([xml](Get-Content "C:\Sites.xml")).Sites.Site.Url) -Leaf

  • Sound only plays through one earphone

    hey i'm new here so bear with me if i make any mistakes.
    recently my 30GB ipod video started playing sound only through one earphone, i tried several different pairs but the problem was the same. i took it to my local apple shop and they said it can't be fixed, but you could have it replaced for £109, i'm a student i don't have £109!
    he said i could get a radio remote, something like this:
    http://www.amazon.co.uk/Apple-MA070G-C-Radio-Remote/dp/B000MTEER4/ref=pdbbs_sr4?ie=UTF8&s=electronics&qid=1200145716&sr=8-4
    i wasn't prepared to spend that much so just got a standard remote control with no radio function, however i didn't realise that this had to be connected through the headphone socket! what's the cheapest and most convenient way i can get sound going through both my headphones again? can i get a standard remote that just goes through the adapter at the bottom?
    many thanks, jack
    Message was edited by: kaiser_jack

    I have the same problem! Im looking for anyway just to hear music out of both head phones, but I don't care which port I use. If anyone knows any ways I could soder(sp?) together a par of head phones with a iPod usb-thingy could you tell me how to?

  • MuVo Slim works perfect except Recovery Device Mode. H

    Hello,
    Recently my MuVo Slim has started to be recognized by my PC as a STMP3500 device and so I have run the "Mass Storage Drivers" programm to make it a Player Recovery Device to handle it.
    Currently everything about the device works perfect except causing extra work while connecting to the PC: I have to run the Firmware update program each time I want to browse the files in MuVo Slim.
    Only after the message "A device has been detected in recovery mode and is being initialized. Please wait..." is seen, recognizes the PC the MuVo as an external storage device. (Thereafter I simply close the window of firmware update program)
    Btw, at that point if I click 'start' and upgrade the firmware of MuVo (or downgrade, that makes no difference) it is then again not recognized by PC! In this case, I have to go through the step I've described again: Run the Firmware update program , see the "A device has been detected in recovery mode and is being initialized. Please wait..." message and close the firmware update window, and so on...
    Now what I'd like to learn is if there 's a way to skip this step of making the PC recognize the MuVo Slim? Please remember that my MuVo Slim works perfectly except that.
    Thanks

    Does anybody have solution? I still have to run Firmware Update program
    "MuVoSlim_PCFW_LF__3_02.exe" each time I want to browse files within my MuVo Slim.
    Please help!

  • Sound only from left channel

    I bout an IPhone 3G for my wife last friday. She complained about the music quality saying that her little cheap MP3 player sounded better. I plugged in the headset and found that there was sound only fro one channel (Left). I plugged my headset from my 3GS and it also only had sound from one channel. Any suggestions?

    Try restart, reset, then restore.
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    If this doesn't help, you may need to make an appointment at the Genius BAr ( Apple Store). The iphone has a one year warranty.

  • MuVo Slim 512mb - track or

    I love my MuVo slim but there is one thing that dri'ves me bonkers. I can't figure out why it insists on playing songs alphabetically! I have a couple of CDs ripped on here that need to be played in order as they are songs that are mixed together, no pauses between tracks. Does anyone know how I can get it to play the songs in the order they were ripped?

    To get them to play in a particular order, just add track numbers in front of the filename, like this
    SampleSong.mp3 becomes 0 - SampleSong.mp3
    Check this knowledgebase case for more information.
    Cat
    Message Edited by Catherina-CL on 08-30-2005 02:40 PM

  • Sound only plays from one application at a time

    I've been having a problem recently with my laptop where it will play sound just fine, but only for one application.
    Explained differently, if I try to start anything that would play sound, and if something else is already playing sound, there won't be any sound from the newer source, and if I want it to play sound, I would have to mute the first source and restart the second.
    Another oddity to this problem is that I can work around this problem by first muting the first source, then starting up the second source, and un-muting the first. This can also be done with additional sources by muting everything that came before it. However, this does not work in every case, and having to do so everytime is rather tedious. I've looked for a few solutions already (Checking drivers, etc.) but nothing seems to work.
    Laptop: Satellite L755D-S5104
    OS: Windows 7 Home Premium Service Pack 1

    Hi V07,
    Here is what I've notice when Im playing a video sound using K-Lite Codec [Media Player Classic] then while the sound plays on the background. I started to play the game LOL (Leagua of Legends) and it provides me both sound the LOL and video sound with no issues.
    I tried playing video using Media Player Classic and open another video using VLC Player both of this application works fine with no conflict. Both of the player provide good quality sounds.
    You can try installing K-Lite Codec [Media Player Classic] and VLC player.
    K-Lite Code for Win7
    http://www.codecguide.com/download_kl.htm
    VLC Player for Win7/Win8
    http://www.codecguide.com/download_other.htm#videolan
    Im hoping it will work to your laptops because on my Toshiba laptop it works perfectly.
    BTW IF YOU THINK IT HELPS ALOT. PLEASE DONT BE AFRAID TO CLICK KUDOS star^_^
    - cokies

  • Sound only works from one port

    My sound only works when I use the output port on the back of my computer, but I'd also like to use the one at the front of my computer for convenience. What setting am I supposed to change to do this? Here is some information about my system.
    ~ > cat /proc/asound/version
    Advanced Linux Sound Architecture Driver Version 1.0.24.
    ~ > aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: VT1705 Analog [VT1705 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 2: VT1705 HP [VT1705 HP]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    My guess is that I want to use device 2 of card 0, so I tried creating a ~/.asound.rc containing
    defaults.pcm.device 2
    but this didn't seem to do anything.

    The "Front" channel isn't the same thing as the front panel. From the ALSA wiki:
    "Front, Surround, Center, LFE (subwoofer) and Side (these are the names of the channels with Intel HD Audio, they may vary with different hardware)."
    How many sounds cards do you have?
    [dspider@arch ~]$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: HDA Generic [HDA Generic]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [dspider@arch ~]$
    What are the other HDMI devices? The video card?
    And have you tried googling the problem?
    http://ubuntuforums.org/showthread.php?t=1462288

Maybe you are looking for