My 1st generation ipod is giving me troubles.
When I try to connect to the internet, I type in my password and it says unable to join. But if I try it again slowly, it will join. The IP address, Subnet Mask, Router, and DNS codes show up. I can then access the internet. When I access the internet though, as soon as I go to Safari or Youtube, the signal goes to one bar strenght and loses connection. I have reset the Network Settings many times and have even restored it twice. How can I fix this? It may be a hardware problem, so should I take it to an Apple Store?
Thanks for the help! It's hard on a 14-year-old without my iPod working right xD
It does happen to all networks. My neighbor has a linksys network and I can't join it.
It also has a very limited space. You have to be very close (1-3 ft.) from the router to be able to pick the network up. I guess I will take it to my nearest Apple store. Thanks for the help!
Similar Messages
-
TS1363 1st generation iPod shuffle does not show up in iTunes (windows 7)?
1st generation iPod shuffle does not show up in iTunes on my Windows 7 PC (but shows up in my computer). Tried all the Apple trouble-shooting steps (some several times). It used to work with Windows 7 on this PC. Are there other steps I can try?
I'm not sure what "all" means, unless you state them, so if you have not done so already, you should use this procedure to reset the iPod shuffle
http://support.apple.com/kb/HT1655
Then, shut down your computer (power off) and start it up, with iPod shuffle NOT connected. Run iTunes. Then, try connecting the iPod shuffle again.
Since this is a first gen iPod shuffle that IS recognized by the computer (so it's probably not a bad USB connector), you can also try using the iPod Reset Utility
http://support.apple.com/kb/HT1238
This is for the first and second gen iPod shuffle only, and does a lower level reset than using a normal Restore in iTunes. -
1st Generation iPod Touch No Longer Recognized by Windows 7 PC
I have a 1st generation iPod Touch (no camera) that can no longer connect to my Windows 7 pc. Plugging in the iPod via USB does not trigger any sort of dialog box in Windows and it doesn't trigger a message saying a device has been connected; the iPod does not show up in either iTunes, Computer, Device Manager or Devices and Printers, either as an Apple mobile device or an unrecognized device, and does not charge when connected to USB (though the wall-charger still works). As far as my computer is concerned this iPod does not exist. I had successfully synced this iPod as recently as one week ago and am ready to pitch the thing in the garbage if I can't find a solution.
I have the latest version of iTunes as well as the most up-to-date Windows updates. I have already followed all the steps listed here (iOS: Device not recognized in iTunes for Windows) multiple times with no success.
I also have tried following the instructions listed here (Re: For those Windows users who suddenly cannot see their device in iTunes. Here's a solution that has worked.) but this also hasn't worked since the iPod isn't recognized in the Device Manager and I am not given the option of updating the drivers, manually or otherwise.
I have uninstalled/re-installed iTunes and all related Apple services multiple times. The Apple Mobile Device Service is functioning normally. iTunes diagnostics indicate that there is no device connected no matter what I do. I have reinstalled my Windows USB drivers and changed the settings on the USB Root Hub in the Windows Device Manager to disable power saving options.
I have tried connecting the device to another PC which detects and syncs another apple device (iPhone 5) with no issues, and had the exact same result: the computer doesn't even recognize an iPod is connected.
I can't update the Apple Mobile Device Drivers because the device is not recognized by my machine in any way.
I even completely reset my iPod and that just left me with a unactivated iPod that still isn't detected.
I am really unbelievably fed-up with the useless "try checking your USB cable"-style advice that people seem to offer on this forum. If anybody has dealt with this issue and has any serious advice other than "re-install iTunes," it would be much appreciated.You said "I am really unbelievably fed-up with the useless "try checking your USB cable"-style"
- Did you try another cable?
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Try on another computer -
HT4972 upgrade 1st generation ipod
I have the 1st generation ipod touch and its fast becoiming obsolate as I am no longer able to download the latest applications as I'm advised I need to have the software updated, I have since had it reset and updated on the apple web portal but the latest I can have seems to be version 2.2.1. I will require IOS version 3xx and above. How do I proceed to upgrade my software?
iOS 3.1.3 is the last update for the 1G. You get that here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
Updating the 1st generation ipod
I have a 1st generation ipod touch and I had to reset it.
Since the reset I can no longer put any apps like skype,
facebook etc... It says that the software needs to be updated,
but when I try to update it says that it is up to date (3.1.3). HELP!!In actuality, the 1G can go to 3.1.3.
stedman1 wrote:
iOS 3.1.1 is the highest possible for the 1st generation iPod Touch. -
1st generation ipod nano's shuffle feature stoped working
my 1st generation ipod nano has a shuffle feature, but now it doesnt work. when i turn on the shuffle feature and try to play all songs it only plays the one song you select to be the first song in the shuffle order. when i pick a list of songs it only plays the first song and says in the top corner: song "1 of 1" as if there were no other songs. please help me or else im getting rid of my ipod and not using apple technology ever again.
Message was edited by: badrubberpiggy25good luck with that
-
1st Generation iPod (5GB) not working with new iMac
Hi,
i have the Problem, that my 1st generation iPod is not detected by my new imac (20'' 2,4 Ghz). When i plug in the firewire cable, nothing happens. DiscUtility sees no disc at all.
But when i plug in the iPod "behind" another Firewire disc (acting as a fw-hub), the iPod ist detected within a second, and everything works fine.
I just wanted to know if someone else is having this Problem, or if someone else has a working iPod 1.Gen on the new iMac.
Thanks
JoergHi JvdL,
I am one with a 1st gen iPod (Windows, 10GB).
But I have no problems with it and I also don't have a last gen. iMac.
However, in the iPod Forum http://discussions.apple.com/category.jspa?categoryID=151 and in the iTunes Forum http://discussions.apple.com/category.jspa?categoryID=149&start=0#threads there are quite some threads with similar problems.
Sorry
Stefan -
1st Generation Ipod touch keeps crashing/going into stand by mode 3.1.3
I have a 1st generation ipod touch that I recently restored to the newest firmware 3.1.3. My problem is that after this restore and subsequent restore attempts is that the device keeps clicking off to a black screen when I use wifi or transition from different desktop screens. The device does not completely crash as once the screen goes black I can hit the home button an slide to unlock. I have found that if I disable wifi this problem does not occur. I have tried to both reset and restore with no success. Any suggestions or ideas?
If a restore did not help, I'm afraid you have a hardware issue there.
Basic troubleshooting steps.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
MacOSG: An Apple User Group iTunes: MacOSG Podcast Follow us on Twitter: MacOSG -
1st Generation Ipod Touch not recognized by Itunes 10.3
Just updated Itunes on my PC to the most recent version. My 1st generation Ipod Touch is not recognized now. I get an error message 0xE800000A. Looking for suggestions. Thanks!
Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
Why wont my 1st generation ipod let me download some apps?
Please help!
it says i need ios 3.2. can i get it?
1st generation ipod touch, 16GBYou can't. The 1G iPod can only go as far as iOS 3.1.3. There are not that many apps that are now compatible with the 1G.
-
Where is my 1st generation ipod nano replacement?
I sent in two 1st generation ipod nanos that qualified for the replacement program. I received one two weeks after I sent both in, through fedex. I'm still waiting for the second one, and it's been 3 months already. The website said it takes up to 6 weeks. I haven't received any emails or messages relate to this problem. Fedex received both ipods and I still have the receipt to prove it. What's going on?
I called apple and tried to find out what happened. Turns out everything was going smoothly until it reached their end. I tracked it with fedex and it said it was delivered to a city in california. The guy I was talking to said apple would get back to me in a couple of days, because they, "have to set up an investigation". It's been a week and 3 days. I'm a big apple fan, but this whole situation is really disappointing.
-
Trying to install 1st generation iPod Nano on Windows 7 OS laptop.
When trying to open i Tunes installed from my original software CD, I get a message ""The files 'i Tunes Library.itl' cannot be read because it was created by a newer version of i Tunes." I have a 1st generation iPod Nano and a Windows 7 OS laptop. The newer i Tunes wouldn't work with my iPod (said it was corrupted), and when I restored the ipod, my CD-DVD quit working and I had to do a system restore to fix that. Now I am trying to get my ipod working with my PC again and get the above message. What do I need to do to get everything working together?
Don't use the original software CD, because its software is outdated.
Download the latest version of iTunes here
http://www.apple.com/itunes/
It works with all iPods, going back to the first one from 2001. -
I have rediscovered my 1st generation iPod nano in a drawer and am attempting to use it again but it will not sync with iTunes. The do not disconnect message is on the iPod but nothing is happening on the progress bar on the laptop. I have gone through the 5R's but still no luck. Does anyone have any ideas?
ThanksDoes the battery charge properly? If not, Apple has an iPod exchange program for products with defective batteries.
-
1st generation ipod nano question
Hey everyone,
i have a what i believe is a 1st generation ipod nano ( it's blue )(??) and i had it connected with itunes on another laptop ( windows based ). That laptop died and i recently purchased a new MacBook. So i tried to connect my ipod to the Macbook today but i can't seem to get it to work, i have purcahsed a bunch of songs through itunes that are on the MacBook and i'd like to add them into my ipod.
Is this possible? or because i used my ipod for an older computer am i not able to put the existing songs on my ipod into my MacBook and vice versa, MacBook songs onto the old ipod???
Any help you can give would be great...
Thanks!I have an actual 1st generation ipod and am having a similar problem. I had a windows based laptop, which my nano worked on. When I bought my iMac in December '07, I reformatted my ipod to use with my mac. After restoring my ipod, I added some songs and used it for a few days before I got a message telling me that I must restore my ipod. I don't know why the message appeared, but I connected my ipod and restored it again. After that, however, my Mac no longer recognized my ipod in Disk Utility, iTunes, or Finder. I've tried using other Macs, no luck, Windows computers (which actually recognize that something is connected, but it doesn't know what), but nothing seems to work. My ipod turns on fine, I can do everything except add/remove music. It will charge if I plug it in, the entire menu system works. I've done the all the tests in Diagnostic mode and everything seems to be fine, but it still doesn't work. >.<
Any help will be greatly appreciated. -
I cannot get my 1st generation iPod Nano to sync my new downloads from itunes on my macbook air. Is this possible or not?
Are you noticed that there are replacement program for iPod Nano 1st gen?
I've had replace my iPod nano 1st with 8 Gb iPod Nano 6th gen last year.
Check this out --> http://www.apple.com/support/ipodnano_replacement/
Maybe you are looking for
-
Using thread to read a big number of files
Hi all, I got a question with THREAD. Can you help me, please? I have a class, PragFileLoader, to read many files in a folder. First readDir() reads whole directory and gets a list of file name. Then readFile() reads each file. And finally readLine()
-
Hello every one. I'm considering buying a Creative Vision:M 60GB player but I have a small question first. I'm affraid that the 60 GB won't last for long and the free space will run out(I have many many CDs and as CDs store worker it will only get la
-
Hello all, I'm relatively new to Oracle Primavera but love it so much. Here's my question; On your Gantt Chart, I know a blue line indicates the Data Date. What exactly does a red line indicate?
-
Hi, I have a signed that I need to make changes to. I thought it would be possible to do this by removing: 1.The digest entries in the manifest 2.Signature file 3.Signature block file However, I get: java.lang.Error: Unresolved compilation problems:
-
Hello all! Can anyone give any information as to how Productin Order IDOC is generated? The requirement is that IDOC should be generated when the production order is "released". Thanks a lot ! Deepak