My 2nd gen. ipod freezes after a few min. of use and shuts down completly and restarts itself.. ive reset it several times..help!

after turning on my ipod any app i go into will freeze after a few min. and after a while it will turn off and restart by itself

Have you tried restoring the iPod from an older backup?
If that doesn't work try restoring it to factory settings.
See this article for information on backing up and restore your iPod.
http://support.apple.com/kb/ht1414
B-rock

Similar Messages

  • I tried downloading the iOS8 to my iPod 5th generation and when it finished downloading it shut down completely and it said there was an error and no the iPod is in recovery mode. What can I do to restore it and update it? Please, I need help.

    Hello,
    I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
    I really need help.

    What happens when you connect to computer and restore via iTunes?
    Without knowing that:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    Did you purchase the Mac new?
    You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
    Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
    message edited by:  cs

  • 2nd gen iPod Touch - can earphones with mic be used?

    My daughter just got a 2nd gen Touch. She wants to buy some apps that use a microphone for input. I realise the 2nd gen doesn't come supplied with inline mic earphones (as opposed to the 3rd gen, which does), but can she buy any brand of earphone with inline mic and expect them to work?
    Or does she need official Apple ones?

    I have a 2nd generation ipod touch with the 3.1 software loaded. I don't see a menu available to pair a Bluetooth stereo headset. Is this capability available on the 2nd gen ipod touch?

  • I deleted the applications on my 2nd gen iPod accidentally, now I can't download anything because everything's updated and the newest software isn't available for 2nd gen iPods?! What's the point of buying apple devices then?? They're meant to last long.

    So basically, am I now suppose to throw the device away??
    I was really disappointed in Apple when I found out that 1st and 2nd generation iPods cannot be updated. So my device is pointless now?
    Or is there any kind of solution?

    Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Your iPod still plays music, gets and sends mail, surfs the web and does other things. to. It is old by electronics standards.

  • [SOLVED]Freezing after a few hours of use once SSD is installed.

    I installed a SSD a few months ago and ever since I have been dealing with system freezes, from time to time. I cron.daily fstrim; so, that isn't the cause. I completely unsure what is causing this. I am using a SSD adapter mSATA to SATA III. I am not sure if that is relevant to the issue.
    Last edited by neighborhoodhacker (2015-02-11 01:32:04)

    I see you weren't trying to get me to try a different kernel but instead the fallback's grub entry, and I will try it out. As for dmesg after the issue I think I was able to log it to another harddrive as the system was failing.
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask FE0000000 write-back
    [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xdaffd max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcbd0-0x000fcbdf] mapped at [ffff8800000fcbd0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff]
    [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff]
    [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
    [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xdad2ffff]
    [ 0.000000] [mem 0x40200000-0xdabfffff] page 2M
    [ 0.000000] [mem 0xdac00000-0xdad2ffff] page 4k
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xdad8e000-0xdad8efff]
    [ 0.000000] [mem 0xdad8e000-0xdad8efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xdadb8000-0xdaddefff]
    [ 0.000000] [mem 0xdadb8000-0xdaddefff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xdade8000-0xdaf27fff]
    [ 0.000000] [mem 0xdade8000-0xdaf27fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xdafe8000-0xdaffcfff]
    [ 0.000000] [mem 0xdafe8000-0xdaffcfff] page 4k
    [ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0430 000024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 0x00000000DAFFEE18 000064 (v01 MSI_NB MEGABOOK 00000001 MSFT 00010013)
    [ 0.000000] ACPI: FACP 0x00000000DAF91D98 0000F4 (v04 MSI_NB MEGABOOK 00000001 MSFT 00010013)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xDAFDBE40/0x00000000DAFDBD40, using 32-bit address (20140926/tbfadt-283)
    [ 0.000000] ACPI: DSDT 0x00000000DAF75018 0131A4 (v01 MSI_NB MEGABOOK 00000001 INTL 20091112)
    [ 0.000000] ACPI: FACS 0x00000000DAFDBE40 000040
    [ 0.000000] ACPI: APIC 0x00000000DAFFDF18 0000CC (v02 MSI_NB MEGABOOK 00000001 MSFT 00010013)
    [ 0.000000] ACPI: ECDT 0x00000000DAFDBB18 0000C1 (v01 MSI_NB MEGABOOK 00000001 AMI. 00000003)
    [ 0.000000] ACPI: SLIC 0x00000000DAF92E18 000176 (v01 MSI_NB MEGABOOK 00000001 MSFT 00000001)
    [ 0.000000] ACPI: HPET 0x00000000DAFDCD18 000038 (v01 MSI_NB MEGABOOK 00000001 AMI. 00000003)
    [ 0.000000] ACPI: MCFG 0x00000000DAFDCC98 00003C (v01 MSI_NB MEGABOOK 00000001 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 0x00000000DAF74818 000789 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000DAF73018 000996 (v01 PmRef CpuPm 00003000 INTL 20091112)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x11fdf9000-0x11fdfcfff]
    [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x11fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xdad2ffff]
    [ 0.000000] node 0: [mem 0xdad8e000-0xdad8efff]
    [ 0.000000] node 0: [mem 0xdadb8000-0xdaddefff]
    [ 0.000000] node 0: [mem 0xdade8000-0xdaf27fff]
    [ 0.000000] node 0: [mem 0xdafe8000-0xdaffcfff]
    [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x11fdfffff]
    [ 0.000000] On node 0 totalpages: 1026122
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 157 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13931 pages used for memmap
    [ 0.000000] DMA32 zone: 891565 pages, LIFO batch:31
    [ 0.000000] Normal zone: 2040 pages used for memmap
    [ 0.000000] Normal zone: 130560 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdad30000-0xdad8dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdad8f000-0xdadb7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaddf000-0xdade7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaf28000-0xdafe7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdaffd000-0xdaffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffdfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88011fa00000 s82880 r8192 d31808 u131072
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009930
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9f254867-12c6-4d7b-b249-78fa4053854a rw quiet libata.force=noncq initrd=/intel-ucode.img initrd=/initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3955224K/4104488K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 149264K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
    [ 0.000000] NR_IRQS:8448 nr_irqs:552 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2294.734 MHz processor
    [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.69 BogoMIPS (lpj=7649113)
    [ 0.000042] pid_max: default: 32768 minimum: 301
    [ 0.000048] ACPI: Core revision 20140926
    [ 0.011161] ACPI: All ACPI Tables successfully acquired
    [ 0.011459] Security Framework initialized
    [ 0.011466] Yama: becoming mindful.
    [ 0.011739] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.012624] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.012990] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012996] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.013191] Initializing cgroup subsys memory
    [ 0.013197] Initializing cgroup subsys devices
    [ 0.013199] Initializing cgroup subsys freezer
    [ 0.013201] Initializing cgroup subsys net_cls
    [ 0.013203] Initializing cgroup subsys blkio
    [ 0.013225] CPU: Physical Processor ID: 0
    [ 0.013226] CPU: Processor Core ID: 0
    [ 0.013230] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.013233] mce: CPU supports 7 MCE banks
    [ 0.013244] CPU0: Thermal monitoring enabled (TM1)
    [ 0.013253] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.013364] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.014415] ftrace: allocating 20931 entries in 82 pages
    [ 0.025175] Switched APIC routing to physical flat.
    [ 0.025713] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058699] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.058707] TSC deadline timer enabled
    [ 0.058731] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.058751] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.058754] ... version: 3
    [ 0.058755] ... bit width: 48
    [ 0.058756] ... generic registers: 4
    [ 0.058757] ... value mask: 0000ffffffffffff
    [ 0.058758] ... max period: 0000ffffffffffff
    [ 0.058759] ... fixed-purpose events: 3
    [ 0.058760] ... event mask: 000000070000000f
    [ 0.078871] x86: Booting SMP configuration:
    [ 0.078873] .... node #0, CPUs: #1
    [ 0.092135] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.098879] #2 #3
    [ 0.125410] x86: Booted up 1 node, 4 CPUs
    [ 0.125414] smpboot: Total of 4 processors activated (18365.78 BogoMIPS)
    [ 0.128857] devtmpfs: initialized
    [ 0.131281] PM: Registering ACPI NVS region [mem 0xdaf28000-0xdafe7fff] (786432 bytes)
    [ 0.132223] pinctrl core: initialized pinctrl subsystem
    [ 0.132286] RTC time: 2:39:37, date: 02/08/15
    [ 0.132394] NET: Registered protocol family 16
    [ 0.145458] cpuidle: using governor ladder
    [ 0.158794] cpuidle: using governor menu
    [ 0.158898] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.158903] ACPI: bus type PCI registered
    [ 0.158916] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.158997] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.158999] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.159092] PCI: Using configuration type 1 for base access
    [ 0.159274] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.159275] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.159276] mtrr: corrected configuration.
    [ 0.172601] ACPI: Added _OSI(Module Device)
    [ 0.172603] ACPI: Added _OSI(Processor Device)
    [ 0.172604] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.172606] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.174578] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.176799] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.299249] ACPI: Dynamic OEM Table Load:
    [ 0.299257] ACPI: SSDT 0xFFFF880119779800 00060C (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.312493] ACPI: Dynamic OEM Table Load:
    [ 0.312499] ACPI: SSDT 0xFFFF88011B010400 000303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.325708] ACPI: Dynamic OEM Table Load:
    [ 0.325712] ACPI: SSDT 0xFFFF880119712A00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.339455] ACPI: Interpreter enabled
    [ 0.339467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.339476] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140926/hwxface-580)
    [ 0.339483] ACPI: (supports S0 S1 S3 S5)
    [ 0.339484] ACPI: Using IOAPIC for interrupt routing
    [ 0.339510] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.346701] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.346707] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.346712] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.347245] PCI host bridge to bus 0000:00
    [ 0.347248] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.347251] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.347252] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.347254] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.347256] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.347258] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.347259] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.347261] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.347263] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.347264] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.347266] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.347268] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.347276] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.347364] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 0.347376] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf53fffff 64bit]
    [ 0.347382] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.347387] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
    [ 0.347511] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.347545] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
    [ 0.347661] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.347766] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.347797] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff]
    [ 0.347935] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.347980] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.348033] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.348062] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
    [ 0.348200] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.348286] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.348423] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.348471] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.348517] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
    [ 0.348653] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.348702] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.348748] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 0.348886] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.348939] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.348986] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.349123] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.349171] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.349225] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.349256] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
    [ 0.349395] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.349439] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.349489] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 0.349763] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 0.349797] pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
    [ 0.349811] pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
    [ 0.349824] pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
    [ 0.349838] pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
    [ 0.349851] pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
    [ 0.349865] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff]
    [ 0.349953] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.350035] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.350060] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
    [ 0.350098] pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
    [ 0.350273] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.350278] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
    [ 0.350283] pci 0000:00:1c.0: bridge window [mem 0xf7200000-0xf7bfffff]
    [ 0.350292] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.350435] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
    [ 0.350502] pci 0000:02:00.0: reg 0x10: [mem 0xf6800000-0xf680ffff 64bit]
    [ 0.350845] pci 0000:02:00.0: supports D1
    [ 0.350847] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
    [ 0.350912] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.355609] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.355620] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
    [ 0.355629] pci 0000:00:1c.1: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.355644] pci 0000:00:1c.1: bridge window [mem 0xf1600000-0xf1ffffff 64bit pref]
    [ 0.355802] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.355863] pci 0000:03:00.0: reg 0x10: [mem 0xf5e00000-0xf5e01fff 64bit]
    [ 0.356177] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.362277] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.362287] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
    [ 0.362296] pci 0000:00:1c.3: bridge window [mem 0xf5e00000-0xf67fffff]
    [ 0.362311] pci 0000:00:1c.3: bridge window [mem 0xf0b00000-0xf14fffff 64bit pref]
    [ 0.362513] pci 0000:04:00.0: [1969:1083] type 00 class 0x020000
    [ 0.362632] pci 0000:04:00.0: reg 0x10: [mem 0xf5400000-0xf543ffff 64bit]
    [ 0.362684] pci 0000:04:00.0: reg 0x18: [io 0xa000-0xa07f]
    [ 0.363228] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.363333] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.368964] pci 0000:00:1c.5: PCI bridge to [bus 04]
    [ 0.368974] pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
    [ 0.368983] pci 0000:00:1c.5: bridge window [mem 0xf5400000-0xf5dfffff]
    [ 0.368998] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.369530] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 0.369583] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
    [ 0.369634] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
    [ 0.369682] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 0.369731] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.369781] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.369832] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 0.369882] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
    [ 0.370034] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.370088] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
    [ 0.370181] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.370183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.370186] vgaarb: loaded
    [ 0.370187] vgaarb: bridge control possible 0000:00:02.0
    [ 0.370272] PCI: Using ACPI for IRQ routing
    [ 0.373322] PCI: pci_cache_line_size set to 64 bytes
    [ 0.373405] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
    [ 0.373407] e820: reserve RAM buffer [mem 0xdad30000-0xdbffffff]
    [ 0.373409] e820: reserve RAM buffer [mem 0xdad8f000-0xdbffffff]
    [ 0.373411] e820: reserve RAM buffer [mem 0xdaddf000-0xdbffffff]
    [ 0.373412] e820: reserve RAM buffer [mem 0xdaf28000-0xdbffffff]
    [ 0.373414] e820: reserve RAM buffer [mem 0xdaffd000-0xdbffffff]
    [ 0.373415] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
    [ 0.373525] NetLabel: Initializing
    [ 0.373527] NetLabel: domain hash size = 128
    [ 0.373528] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.373541] NetLabel: unlabeled traffic allowed by default
    [ 0.373571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.373577] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.375608] Switched to clocksource hpet
    [ 0.380563] pnp: PnP ACPI init
    [ 0.380704] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.380707] system 00:00: [io 0x1000-0x100f] has been reserved
    [ 0.380709] system 00:00: [io 0xffff] has been reserved
    [ 0.380710] system 00:00: [io 0xffff] has been reserved
    [ 0.380713] system 00:00: [io 0x0400-0x0453] could not be reserved
    [ 0.380714] system 00:00: [io 0x0458-0x047f] has been reserved
    [ 0.380716] system 00:00: [io 0x0500-0x057f] has been reserved
    [ 0.380718] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.380721] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.380756] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.380799] system 00:02: [io 0x0454-0x0457] has been reserved
    [ 0.380802] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.380880] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.380883] system 00:03: [io 0x0400-0x047f] could not be reserved
    [ 0.380884] system 00:03: [io 0x0500-0x057f] has been reserved
    [ 0.380887] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.380953] system 00:04: [io 0x025d] has been reserved
    [ 0.380955] system 00:04: [io 0x025c] has been reserved
    [ 0.380958] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.380960] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.380962] system 00:04: [mem 0xfec10000-0xfec17fff] has been reserved
    [ 0.380964] system 00:04: [mem 0xfec18000-0xfec1ffff] has been reserved
    [ 0.380965] system 00:04: [mem 0xfec28000-0xfec2ffff] has been reserved
    [ 0.380967] system 00:04: [mem 0xfec38000-0xfec3ffff] has been reserved
    [ 0.380969] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.380972] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.381028] pnp 00:05: Plug and Play ACPI device, IDs STLc060 PNP0f13 (active)
    [ 0.381070] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.381106] system 00:07: [io 0x0240-0x0259] has been reserved
    [ 0.381108] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.381297] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.381299] system 00:08: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 0.381301] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.381303] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.381305] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.381307] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.381309] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.381311] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.381313] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.381315] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.381317] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
    [ 0.381319] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.381506] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.381508] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.381510] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.381512] system 00:09: [mem 0x00100000-0xdf9fffff] could not be reserved
    [ 0.381514] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.381551] pnp: PnP ACPI: found 10 devices
    [ 0.388275] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.388279] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
    [ 0.388286] pci 0000:00:1c.0: bridge window [mem 0xf7200000-0xf7bfffff]
    [ 0.388292] pci 0000:00:1c.0: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.388300] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.388304] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
    [ 0.388310] pci 0000:00:1c.1: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.388315] pci 0000:00:1c.1: bridge window [mem 0xf1600000-0xf1ffffff 64bit pref]
    [ 0.388324] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.388327] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
    [ 0.388334] pci 0000:00:1c.3: bridge window [mem 0xf5e00000-0xf67fffff]
    [ 0.388339] pci 0000:00:1c.3: bridge window [mem 0xf0b00000-0xf14fffff 64bit pref]
    [ 0.388347] pci 0000:00:1c.5: PCI bridge to [bus 04]
    [ 0.388350] pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
    [ 0.388357] pci 0000:00:1c.5: bridge window [mem 0xf5400000-0xf5dfffff]
    [ 0.388362] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.388371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.388373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.388375] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.388377] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.388378] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.388380] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.388382] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.388383] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.388385] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.388387] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
    [ 0.388388] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
    [ 0.388391] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.388392] pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf7bfffff]
    [ 0.388394] pci_bus 0000:01: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.388396] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.388398] pci_bus 0000:02: resource 1 [mem 0xf6800000-0xf71fffff]
    [ 0.388399] pci_bus 0000:02: resource 2 [mem 0xf1600000-0xf1ffffff 64bit pref]
    [ 0.388401] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 0.388403] pci_bus 0000:03: resource 1 [mem 0xf5e00000-0xf67fffff]
    [ 0.388405] pci_bus 0000:03: resource 2 [mem 0xf0b00000-0xf14fffff 64bit pref]
    [ 0.388406] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 0.388408] pci_bus 0000:04: resource 1 [mem 0xf5400000-0xf5dfffff]
    [ 0.388410] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.388437] NET: Registered protocol family 2
    [ 0.388623] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.388704] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.388770] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.388790] TCP: reno registered
    [ 0.388800] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.388816] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.388877] NET: Registered protocol family 1
    [ 0.388892] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.389405] PCI: CLS 64 bytes, default 64
    [ 0.389450] Unpacking initramfs...
    [ 0.448801] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
    [ 0.448811] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.448813] software IO TLB [mem 0xd6d30000-0xdad30000] (64MB) mapped at [ffff8800d6d30000-ffff8800dad2ffff]
    [ 0.449057] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.449111] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
    [ 0.449119] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
    [ 0.449127] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
    [ 0.449135] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
    [ 0.449193] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.449219] Scanning for low memory corruption every 60 seconds
    [ 0.449627] futex hash table entries: 4096 (order: 6, 262144 bytes)
    [ 0.449669] Initialise system trusted keyring
    [ 0.450010] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.451412] zpool: loaded
    [ 0.451416] zbud: loaded
    [ 0.451618] VFS: Disk quotas dquot_6.5.2
    [ 0.451657] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.451787] msgmni has been set to 7731
    [ 0.451844] Key type big_key registered
    [ 0.452071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.452119] io scheduler noop registered
    [ 0.452122] io scheduler deadline registered
    [ 0.452154] io scheduler cfq registered (default)
    [ 0.452746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.452762] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.452794] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.452795] vesafb: scrolling: redraw
    [ 0.452797] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.452812] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 3072k, total 3072k
    [ 0.508687] Console: switching to colour frame buffer device 128x48
    [ 0.564474] fb0: VESA VGA frame buffer device
    [ 0.564491] intel_idle: MWAIT substates: 0x21120
    [ 0.564492] intel_idle: v0.4 model 0x2A
    [ 0.564493] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.564683] GHES: HEST is not enabled!
    [ 0.564749] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.565221] Linux agpgart interface v0.103
    [ 0.565274] rtc_cmos 00:01: RTC can wake from S4
    [ 0.565475] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.565532] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 0.565544] Intel P-state driver initializing.
    [ 0.565703] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.565997] TCP: cubic registered
    [ 0.566275] NET: Registered protocol family 10
    [ 0.566943] NET: Registered protocol family 17
    [ 0.567738] Loading compiled-in X.509 certificates
    [ 0.567776] registered taskstats version 1
    [ 0.568840] Magic number: 3:915:661
    [ 0.568898] platform PNP0C0A:00: hash matches
    [ 0.568912] acpi PNP0C0A:00: hash matches
    [ 0.569034] rtc_cmos 00:01: setting system clock to 2015-02-08 02:39:37 UTC (1423363177)
    [ 0.569312] PM: Hibernation image not present or could not be loaded.
    [ 0.572641] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 0.572646] Write protecting the kernel read-only data: 8192k
    [ 0.577556] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 0.579884] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 0.590832] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.606957] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.609083] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.611298] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.611327] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.611349] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.611369] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.611389] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.613214] ACPI: bus type USB registered
    [ 0.613378] usbcore: registered new interface driver usbfs
    [ 0.613394] usbcore: registered new interface driver hub
    [ 0.613553] usbcore: registered new device driver usb
    [ 0.615034] SCSI subsystem initialized
    [ 0.615111] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.615120] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
    [ 0.615398] xhci_hcd 0000:03:00.0: irq 24 for MSI/MSI-X
    [ 0.615405] xhci_hcd 0000:03:00.0: irq 25 for MSI/MSI-X
    [ 0.615410] xhci_hcd 0000:03:00.0: irq 26 for MSI/MSI-X
    [ 0.615415] xhci_hcd 0000:03:00.0: irq 27 for MSI/MSI-X
    [ 0.615421] xhci_hcd 0000:03:00.0: irq 28 for MSI/MSI-X
    [ 0.615764] hub 1-0:1.0: USB hub found
    [ 0.615781] hub 1-0:1.0: 2 ports detected
    [ 0.615923] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.615928] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
    [ 0.617293] libata version 3.00 loaded.
    [ 0.618400] ahci 0000:00:1f.2: version 3.0
    [ 0.618668] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    [ 0.618756] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 0.618760] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems apst
    [ 0.619035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.619242] ehci-pci: EHCI PCI platform driver
    [ 0.619411] hub 2-0:1.0: USB hub found
    [ 0.619424] hub 2-0:1.0: 2 ports detected
    [ 0.626607] scsi host0: ahci
    [ 0.626747] scsi host1: ahci
    [ 0.626917] scsi host2: ahci
    [ 0.627076] scsi host3: ahci
    [ 0.627210] scsi host4: ahci
    [ 0.627361] scsi host5: ahci
    [ 0.627422] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 29
    [ 0.627424] ata2: DUMMY
    [ 0.627426] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 29
    [ 0.627427] ata4: DUMMY
    [ 0.627428] ata5: DUMMY
    [ 0.627429] ata6: DUMMY
    [ 0.627569] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.627579] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.627598] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.631494] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.631512] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c08000
    [ 0.638822] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.639003] hub 3-0:1.0: USB hub found
    [ 0.639011] hub 3-0:1.0: 2 ports detected
    [ 0.639242] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.639247] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.639262] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.642554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.643177] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.643191] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000
    [ 0.652259] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.652699] hub 4-0:1.0: USB hub found
    [ 0.652710] hub 4-0:1.0: 2 ports detected
    [ 0.922174] usb 1-1: new high-speed USB device number 2 using xhci_hcd
    [ 0.945476] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.945492] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 0.945525] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.956467] ata1.00: FORCE: horkage modified (noncq)
    [ 0.957005] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 0.957805] ata3.00: FORCE: horkage modified (noncq)
    [ 0.958760] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.958784] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 0.958793] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 0.963869] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 0.963879] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 0.968453] ata1.00: ATA-8: MKNSSDAT120GB-V, 522ABBF0, max UDMA/133
    [ 0.968462] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (not used)
    [ 0.969687] ata3.00: ACPI cmd ef/90:05:00:00:00:a0 (SET FEATURES) succeeded
    [ 0.976938] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 0.978816] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 0.978827] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 0.987598] ata3.00: ATAPI: PIONEER DVD-RW DVRTD10RS, 1.00, max UDMA/100
    [ 0.988497] ata1.00: configured for UDMA/133
    [ 0.988969] scsi 0:0:0:0: Direct-Access ATA MKNSSDAT120GB-V BBF0 PQ: 0 ANSI: 5
    [ 1.017495] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.017504] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.023393] ata3.00: ACPI cmd ef/90:05:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.041267] ata3.00: configured for UDMA/100
    [ 1.049538] usb-storage 1-1:1.0: USB Mass Storage device detected
    [ 1.049856] scsi host6: usb-storage 1-1:1.0
    [ 1.050008] usbcore: registered new interface driver usb-storage
    [ 1.050529] usbcore: registered new interface driver uas
    [ 1.053443] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVRTD10RS 1.00 PQ: 0 ANSI: 5
    [ 1.069454] hub 3-1:1.0: USB hub found
    [ 1.069587] hub 3-1:1.0: 6 ports detected
    [ 1.070703] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.070853] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.070861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.070908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.072727] sda: sda1 sda2 sda3
    [ 1.073417] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.082775] hub 4-1:1.0: USB hub found
    [ 1.082823] hub 4-1:1.0: 6 ports detected
    [ 1.087285] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.087291] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.087657] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.268924] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
    [ 1.289425] usb-storage 2-2:1.0: USB Mass Storage device detected
    [ 1.289618] usb-storage 2-2:1.0: Quirks match for vid 174c pid 5106: 800000
    [ 1.289785] scsi host7: usb-storage 2-2:1.0
    [ 1.299447] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.335409] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
    [ 1.348783] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.448440] tsc: Refined TSC clocksource calibration: 2294.788 MHz
    [ 1.586895] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
    [ 1.586941] systemd[1]: Cannot add dependency job for unit cups.path, ignoring: Unit cups.path failed to load: No such file or directory.
    [ 1.586995] systemd[1]: Cannot add dependency job for unit logrotate.timer, ignoring: Unit logrotate.timer is masked.
    [ 1.587072] systemd[1]: Cannot add dependency job for unit systemd-readahead-collect.service, ignoring: Unit systemd-readahead-collect.service failed to load: No such file or directory.
    [ 1.587081] systemd[1]: Cannot add dependency job for unit systemd-readahead-replay.service, ignoring: Unit systemd-readahead-replay.service failed to load: No such file or directory.
    [ 1.604504] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 1.618377] FS-Cache: Loaded
    [ 1.630207] RPC: Registered named UNIX socket transport module.
    [ 1.630210] RPC: Registered udp transport module.
    [ 1.630212] RPC: Registered tcp transport module.
    [ 1.630213] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 1.647066] FS-Cache: Netfs 'nfs' registered for caching
    [ 1.738342] systemd-journald[160]: Received request to flush runtime journal from PID 1
    [ 1.896378] ACPI: AC Adapter [AC0] (on-line)
    [ 1.913050] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.920264] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [ 1.924927] ACPI: Lid Switch [LID]
    [ 1.925021] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
    [ 1.925027] ACPI: Sleep Button [SLPB]
    [ 1.925101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 1.925105] ACPI: Power Button [PWRF]
    [ 1.937531] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140926/utaddress-258)
    [ 1.937540] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIX) (20140926/utaddress-258)
    [ 1.937545] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140926/utaddress-258)
    [ 1.937550] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\_SB_.PCI0.VGA_.TCOI) (20140926/utaddress-258)
    [ 1.937556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.937562] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPXX) (20140926/utaddress-258)
    [ 1.937567] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
    [ 1.937572] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.937574] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPXX) (20140926/utaddress-258)
    [ 1.937578] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
    [ 1.937583] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.937585] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPXX) (20140926/utaddress-258)
    [ 1.937590] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
    [ 1.937595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.937597] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.950241] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
    [ 1.963962] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.963965] ACPI: Thermal Zone [THRM] (59 C)
    [ 1.970019] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.971521] wmi: Mapper loaded
    [ 1.975278] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 1.990904] mei_me 0000:00:16.0: irq 31 for MSI/MSI-X
    [ 2.000986] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 2.008983] [drm] Initialized drm 1.1.0 20060810
    [ 2.016631] AVX version of gcm_enc/dec engaged.
    [ 2.016635] AES CTR mode by8 optimization enabled
    [ 2.018034] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.021376] iTCO_vendor_support: vendor-support=0
    [ 2.022558] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 2.022605] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.022741] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.030079] atl1c 0000:04:00.0: version 1.0.1.1-NAPI
    [ 2.038741] [drm] Memory usable by graphics device = 2048M
    [ 2.038749] checking generic (e0000000 300000) vs hw (e0000000 10000000)
    [ 2.038750] fb: switching to inteldrmfb from VESA VGA
    [ 2.038767] Console: switching to colour dummy device 80x25
    [ 2.038867] [drm] Replacing VGA console driver
    [ 2.044293] atl1c 0000:04:00.0 enp4s0: renamed from eth0
    [ 2.045073] sound hdaudioC0D0: CX20585: BIOS auto-probing.
    [ 2.045573] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
    [ 2.045575] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 2.045577] sound hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
    [ 2.045579] sound hdaudioC0D0: mono: mono_out=0x0
    [ 2.045580] sound hdaudioC0D0: inputs:
    [ 2.045582] sound hdaudioC0D0: Mic=0x1b
    [ 2.045583] sound hdaudioC0D0: Internal Mic=0x1a
    [ 2.046411] sound hdaudioC0D0: Enable sync_write for stable communication
    [ 2.052282] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Fit 1.26 PQ: 0 ANSI: 5
    [ 2.052836] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 2.053603] sd 6:0:0:0: [sdb] Write Protect is off
    [ 2.053607] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [ 2.054309] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.054312] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
    [ 2.055334] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 2.055503] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 2.055623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 2.056699] sdb: sdb1 sdb2
    [ 2.058135] i915 0000:00:02.0: irq 32 for MSI/MSI-X
    [ 2.058142] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.058143] [drm] Driver supports precise vblank timestamp query.
    [ 2.058221] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.058306] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 2.084766] cfg80211: World regulatory domain updated:
    [ 2.084770] cfg80211: DFS Master region: unset
    [ 2.084772] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 2.084775] cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 2.084777] cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
    [ 2.084779] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
    [ 2.084781] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
    [ 2.084783] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 2.084785] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
    [ 2.084787] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
    [ 2.084789] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
    [ 2.088847] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 2.094696] acpi device:22: registered as cooling_device5
    [ 2.095098] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
    [ 2.095200] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
    [ 2.108605] intel_rapl: Found RAPL domain package
    [ 2.108610] intel_rapl: Found RAPL domain core
    [ 2.108634] intel_rapl: Found RAPL domain uncore
    [ 2.136434] ath: phy0: Enable LNA combining
    [ 2.139243] ath: phy0: ASPM enabled: 0x43
    [ 2.139248] ath: EEPROM regdomain: 0x60
    [ 2.139250] ath: EEPROM indicates we should expect a direct regpair map
    [ 2.139252] ath: Country alpha2 being used: 00
    [ 2.139254] ath: Regpair used: 0x60
    [ 2.152499] fbcon: inteldrmfb (fb0) is primary device
    [ 2.161841] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 2.162120] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004840000, irq=17
    [ 2.166029] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
    [ 2.168903] fuse init (API version 7.23)
    [ 2.222218] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.228514] usbcore: registered new interface driver usbhid
    [ 2.228514] usbhid: USB HID core driver
    [ 2.229345] media: Linux media interface: v0.10
    [ 2.232863] Linux video capture interface: v2.00
    [ 2.237860] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M Webcam (05c8:030d)
    [ 2.243121] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 2.255852] input: USB2.0 UVC 1.3M Webcam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input16
    [ 2.255946] usbcore: registered new interface driver uvcvideo
    [ 2.255947] USB Video Class driver (1.1.1)
    [ 2.292079] scsi 7:0:0:0: Direct-Access WDC WD32 00BEKT-60V5T1 12.0 PQ: 0 ANSI: 5
    [ 2.292485] sd 7:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 2.293080] sd 7:0:0:0: [sdc] Write Protect is off
    [ 2.293083] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 2.293676] sd 7:0:0:0: [sdc] No Caching mode page found
    [ 2.293678] sd 7:0:0:0: [sdc] Assuming drive cache: write through
    [ 2.295422] sdc: sdc1 sdc2
    [ 2.296931] sd 7:0:0:0: [sdc] Attached SCSI disk
    [ 2.299154] input: Logitech Unifying Device. Wireless PID:401a as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input17
    [ 2.299231] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:401a] on usb-0000:00:1d.0-1.2:1
    [ 2.311671] mousedev: PS/2 mouse device common for all mice
    [ 2.444835] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    [ 2.447971] Switched to clocksource tsc
    [ 2.483972] random: nonblocking pool is initialized
    [ 2.866501] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.891038] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.892428] Console: switching to colour frame buffer device 170x48
    [ 2.899406] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.899409] i915 0000:00:02.0: registered panic notifier
    [ 2.916714] psmouse serio2: sentelic: Finger Sensing Pad, hw: 14.1.1, sn: 48710, sw: 1.1.0-K
    [ 2.967044] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input10
    [ 3.602210] wlp2s0: authenticate with c4:39:3a:a6:c0:78
    [ 3.615959] wlp2s0: send auth to c4:39:3a:a6:c0:78 (try 1/3)
    [ 3.618511] wlp2s0: authenticated
    [ 3.620632] wlp2s0: associate with c4:39:3a:a6:c0:78 (try 1/3)
    [ 3.639965] wlp2s0: RX AssocResp from c4:39:3a:a6:c0:78 (capab=0xc11 status=0 aid=4)
    [ 3.640118] wlp2s0: associated
    [ 3.640170] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
    [ 3.640252] cfg80211: Calling CRDA for country: US
    [ 3.642310] ath: EEPROM regdomain: 0x8348
    [ 3.642315] ath: EEPROM indicates we should expect a country code
    [ 3.642317] ath: doing EEPROM country->regdmn map search
    [ 3.642318] ath: country maps to regdmn code: 0x3a
    [ 3.642320] ath: Country alpha2 being used: US
    [ 3.642321] ath: Regpair used: 0x3a
    [ 3.642323] ath: regdomain 0x8348 dynamically updated by country IE
    [ 3.642357] cfg80211: Regulatory domain changed to country: US
    [ 3.642359] cfg80211: DFS Master region: FCC
    [ 3.642360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 3.642363] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
    [ 3.642365] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
    [ 3.642368] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
    [ 3.642370] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
    [ 3.642372] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
    [ 4.689450] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 4.693368] ISO 9660 Extensions: RRIP_1991A
    [ 7468.450636] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [ 7468.450649] ata1.00: failed command: WRITE DMA
    [ 7468.450660] ata1.00: cmd ca/00:08:bf:4d:b8/00:00:00:00:00/e3 tag 29 dma 4096 out
    res 40/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
    [ 7468.450666] ata1.00: status: { DRDY }
    [ 7468.450674] ata1: hard resetting link
    [ 7473.787815] ata1: link is slow to respond, please be patient (ready=0)
    [ 7478.478618] ata1: COMRESET failed (errno=-16)
    [ 7478.478635] ata1: hard resetting link
    [ 7483.815897] ata1: link is slow to respond, please be patient (ready=0)
    [ 7488.506735] ata1: COMRESET failed (errno=-16)
    [ 7488.506752] ata1: hard resetting link
    [ 7493.843906] ata1: link is slow to respond, please be patient (ready=0)
    [ 7523.535132] ata1: COMRESET failed (errno=-16)
    [ 7523.535150] ata1: limiting SATA link speed to 3.0 Gbps
    [ 7523.535155] ata1: hard resetting link
    [ 7528.552491] ata1: COMRESET failed (errno=-16)
    [ 7528.552508] ata1: reset failed, giving up
    [ 7528.552513] ata1.00: disabled
    [ 7528.552523] ata1.00: device reported invalid CHS sector 0
    [ 7528.559179] ata1: EH complete
    [ 7528.559221] sd 0:0:0:0: [sda]
    [ 7528.559227] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559231] sd 0:0:0:0: [sda] CDB:
    [ 7528.559235] cdb[0]=0x2a: 2a 00 03 b8 4d bf 00 00 08 00
    [ 7528.559252] blk_update_request: I/O error, dev sda, sector 62410175
    [ 7528.559263] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 282445 (offset 0 size 0 starting block 7801272)
    [ 7528.559270] Buffer I/O error on device sda1, logical block 7801264
    [ 7528.559303] sd 0:0:0:0: [sda]
    [ 7528.559306] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559310] sd 0:0:0:0: [sda] CDB:
    [ 7528.559313] cdb[0]=0x2a: 2a 00 03 cf 02 97 00 00 08 00
    [ 7528.559327] blk_update_request: I/O error, dev sda, sector 63898263
    [ 7528.559332] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 282445 (offset 0 size 0 starting block 7987283)
    [ 7528.559337] Buffer I/O error on device sda1, logical block 7987275
    [ 7528.559379] sd 0:0:0:0: [sda]
    [ 7528.559383] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559387] sd 0:0:0:0: [sda] CDB:
    [ 7528.559390] cdb[0]=0x2a: 2a 00 06 c5 c6 27 00 00 30 00
    [ 7528.559404] blk_update_request: I/O error, dev sda, sector 113624615
    [ 7528.559474] Aborting journal on device sda1-8.
    [ 7528.559501] EXT4-fs error (device sda1) in ext4_do_update_inode:4298: Journal has aborted
    [ 7528.559507] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4758: Journal has aborted
    [ 7528.559560] sd 0:0:0:0: [sda]
    [ 7528.559564] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559569] sd 0:0:0:0: [sda] CDB:
    [ 7528.559572] cdb[0]=0x2a: 2a 00 06 c4 00 3f 00 00 08 00
    [ 7528.559587] blk_update_request: I/O error, dev sda, sector 113508415
    [ 7528.559593] Buffer I/O error on dev sda1, logical block 14188544, lost sync page write
    [ 7528.559609] sd 0:0:0:0: [sda]
    [ 7528.559617] JBD2: Error -5 detected when updating journal superblock for sda1-8.
    [ 7528.559624] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559640] sd 0:0:0:0: [sda] CDB:
    [ 7528.559643] cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
    [ 7528.559660] blk_update_request: I/O error, dev sda, sector 63
    [ 7528.559666] Buffer I/O error on dev sda1, logical block 0, lost sync page write
    [ 7528.559704] EXT4-fs (sda1): I/O error while writing superblock
    [ 7528.559718] EXT4-fs error (device sda1) in ext4_dirty_inode:4877: Journal has aborted
    [ 7528.559776] sd 0:0:0:0: [sda]
    [ 7528.559781] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559785] sd 0:0:0:0: [sda] CDB:
    [ 7528.559788] cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
    [ 7528.559804] blk_update_request: I/O error, dev sda, sector 63
    [ 7528.559809] Buffer I/O error on dev sda1, logical block 0, lost sync page write
    [ 7528.559835] EXT4-fs error (device sda1) in ext4_dirty_inode:4877: IO failure
    [ 7528.559844] EXT4-fs (sda1): previous I/O error to superblock detected
    [ 7528.559895] sd 0:0:0:0: [sda]
    [ 7528.559899] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.559902] sd 0:0:0:0: [sda] CDB:
    [ 7528.559915] cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
    [ 7528.559931] blk_update_request: I/O error, dev sda, sector 63
    [ 7528.559935] Buffer I/O error on dev sda1, logical block 0, lost sync page write
    [ 7528.559981] EXT4-fs (sda1): previous I/O error to superblock detected
    [ 7528.560003] sd 0:0:0:0: [sda]
    [ 7528.560007] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.560010] sd 0:0:0:0: [sda] CDB:
    [ 7528.560013] cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
    [ 7528.560037] blk_update_request: I/O error, dev sda, sector 63
    [ 7528.560041] Buffer I/O error on dev sda1, logical block 0, lost sync page write
    [ 7528.560122] sd 0:0:0:0: [sda]
    [ 7528.560130] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.560135] sd 0:0:0:0: [sda] CDB:
    [ 7528.560138] cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
    [ 7528.560154] blk_update_request: I/O error, dev sda, sector 63
    [ 7528.560161] Buffer I/O error on dev sda1, logical block 0, lost sync page write
    [ 7528.560177] EXT4-fs error (device sda1): ext4_journal_check_start:56:
    [ 7528.560182] EXT4-fs error (device sda1): ext4_journal_check_start:56:
    [ 7528.560186] Detected aborted journal
    [ 7528.560191] EXT4-fs (sda1): Remounting filesystem read-only
    [ 7528.560195] EXT4-fs (sda1): previous I/O error to superblock detected
    [ 7528.560199] Detected aborted journal
    [ 7528.560212] EXT4-fs (sda1): ext4_writepages: jbd2_start: 9223372036854775807 pages, ino 4456487; err -30
    [ 7528.560242] sd 0:0:0:0: [sda]
    [ 7528.560247] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.560254] sd 0:0:0:0: [sda] CDB:
    [ 7528.560259] cdb[0]=0x2a: 2a 00 00 00 00 3f 00 00 08 00
    [ 7528.560281] blk_update_request: I/O error, dev sda, sector 63
    [ 7528.560288] Buffer I/O error on dev sda1, logical block 0, lost sync page write
    [ 7528.565759] sd 0:0:0:0: [sda]
    [ 7528.565768] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.565776] sd 0:0:0:0: [sda] CDB:
    [ 7528.565781] cdb[0]=0x2a: 2a 00 03 cf 02 f7 00 00 08 00
    [ 7528.565813] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 282445 (offset 0 size 0 starting block 7987295)
    [ 7528.565823] Buffer I/O error on device sda1, logical block 7987287
    [ 7528.565878] sd 0:0:0:0: [sda]
    [ 7528.565884] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.565892] sd 0:0:0:0: [sda] CDB:
    [ 7528.565896] cdb[0]=0x2a: 2a 00 08 80 01 af 00 00 08 00
    [ 7528.565923] Buffer I/O error on dev sda1, logical block 17825838, lost async page write
    [ 7528.565970] sd 0:0:0:0: [sda]
    [ 7528.565976] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.565982] sd 0:0:0:0: [sda] CDB:
    [ 7528.566000] cdb[0]=0x2a: 2a 00 08 80 02 bf 00 00 08 00
    [ 7528.566026] Buffer I/O error on dev sda1, logical block 17825872, lost async page write
    [ 7528.566071] sd 0:0:0:0: [sda]
    [ 7528.566077] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566084] sd 0:0:0:0: [sda] CDB:
    [ 7528.566088] cdb[0]=0x2a: 2a 00 08 81 24 7f 00 00 08 00
    [ 7528.566112] Buffer I/O error on dev sda1, logical block 17835144, lost async page write
    [ 7528.566159] sd 0:0:0:0: [sda]
    [ 7528.566166] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566174] sd 0:0:0:0: [sda] CDB:
    [ 7528.566178] cdb[0]=0x2a: 2a 00 00 05 91 a7 00 00 10 00
    [ 7528.566206] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 4457218 (offset 0 size 0 starting block 45622)
    [ 7528.566216] Buffer I/O error on device sda1, logical block 45613
    [ 7528.566225] Buffer I/O error on device sda1, logical block 45614
    [ 7528.566271] sd 0:0:0:0: [sda]
    [ 7528.566276] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566284] sd 0:0:0:0: [sda] CDB:
    [ 7528.566288] cdb[0]=0x2a: 2a 00 00 05 93 07 00 00 08 00
    [ 7528.566316] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 396766 (offset 0 size 0 starting block 45665)
    [ 7528.566324] Buffer I/O error on device sda1, logical block 45657
    [ 7528.566362] sd 0:0:0:0: [sda]
    [ 7528.566367] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566378] sd 0:0:0:0: [sda] CDB:
    [ 7528.566382] cdb[0]=0x2a: 2a 00 00 05 93 27 00 00 08 00
    [ 7528.566409] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 396766 (offset 0 size 0 starting block 45669)
    [ 7528.566418] Buffer I/O error on device sda1, logical block 45661
    [ 7528.566456] sd 0:0:0:0: [sda]
    [ 7528.566462] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566469] sd 0:0:0:0: [sda] CDB:
    [ 7528.566473] cdb[0]=0x2a: 2a 00 00 05 93 37 00 00 08 00
    [ 7528.566501] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 396766 (offset 0 size 0 starting block 45671)
    [ 7528.566508] Buffer I/O error on device sda1, logical block 45663
    [ 7528.566547] sd 0:0:0:0: [sda]
    [ 7528.566553] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566560] sd 0:0:0:0: [sda] CDB:
    [ 7528.566565] cdb[0]=0x2a: 2a 00 00 05 93 47 00 00 08 00
    [ 7528.566593] EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 396755 (offset 0 size 0 starting block 45673)
    [ 7528.566600] Buffer I/O error on device sda1, logical block 45665
    [ 7528.566637] sd 0:0:0:0: [sda]
    [ 7528.566643] Result: hostbyte=0x04 driverbyte=0x00
    [ 7528.566650] sd 0:0:0:0: [sda] CDB:
    [ 7528.566654] cdb[0]=0x2a: 2a 00 00 05 93 67 0

  • Converting a 2nd Gen iPod to Windows

    I want to convert a 2nd generation iPod to the Windows (Fat 32) format so I can give it to my girlfriend to use on her Windows XP box. Any help will be appreciated.

    Actually, that guide is incorrect (out of date).
    You will need at least firmware 1.26 on your iPod in order to be able to update it to the latest firmware for 2nd gen iPods (in order to be able to use iTunes).
    If you don't currently have at least 1.26 you can download it from this site. After it's installed on the iPod (and you can do this either on the PC or the Mac) then just download the latest firmware version and update that and you'll be good to go.

  • HT204266 is there a way to get older versions of apps? I have a 2nd gen ipod touch with ios 4.2.1

    is there a way to get older versions of apps - for a 2nd gen ipod touch with ios 4.2.1

    The only way is to jailbreak and download cracked apps, but I would recommend you wouldn't do that as this is piracy and jailbreaking is illegal in some countries.

  • Just restored 2nd gen ipod touch music won't play and screen freezes

    I don't know if anyone can help, but i had a secound hand 2nd gen ipod for xmas, i restored and updated it on the computer and i was working fine, then over ther weekend it started to freeze so i striped again back to factory setting now it will down load stuff but won't play games ( it freezes) and when i put music on there is know sound. i have tried it on a nother computer and i have scaned for a virus. please can anyone help?

    Try to set it up as new device without using the latest backup, explained here:
    How to back up your data and set up as a new device
    Has the device been jailbroken by the former owner? If yes, your problems could be a result of that:
    Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • HT5569 cannot connect to wi-fi network with my 2nd gen itouch even after following most troubleshooting solutions; have 3 other devices that connect with no problem (using wndr3700v3 dual router)

    cannot connect to home wi-fi connection with my 2nd gen itouch even after following most troubleshooting solutions. i have 2 5-gen itouch ipods and a kindle fire hd 8.9 that can connecto to my wi-fi network and even download from my e-mail accounts with no problem. it had no problem connecting with my old a/b/g netgear router nor the first time i installed my new netgear wndr3700v3 router. since then, no connection. don't know what happened.
    help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could it be this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • I can't see songs on 2nd gen ipod classic and no there is no "on this ipod"

    I cannot access contents of ipod 2nd gen classic.  Summary - music - movies etc photos - info and the blue button DONE.  The ipod is full and I can't upload podcasts.  Every one who helps, and others asking this question are all told to click "on this ipod" but that is not an option among the itunes pull down menus.
    I fear Apple inc wants to force me away from my perfectly functional 2nd gen ipod by not supporting it properly in itunes.

    Mac Daddy\'s Nemesis wrote:
    Summary - music - movies etc photos - info and the blue button DONE.
    I don't understand what this means.
    Mac Daddy\'s Nemesis wrote:
    The ipod is full and I can't upload podcasts.
    Remove something from the iPod then.
    Mac Daddy\'s Nemesis wrote:
    Every one who helps, and others asking this question ...
    What question? You've simply made a few random statements, the meaning of which appears to be lost in translation (to me anyway!).
    You need to be more specific.
    Do you use Sync to manage your iPod? If so, make changes in your iTunes Library, that will remove some media from the iPod at the next Sync, thus leaving room for the Podcasts.
    Then connect the iPod to your iTunes Library and look on the iPod/Podcasts pane. (I assume that your reference to "on this iPod" is related to this step.) Do you mean this?...
    or, if you have the Sidebar turned on,  this....
    Whichever screen you have, click on the device, and then look on the Podcasts pane and choose the option to Sync Podcasts to your iPod. You may need to click on Sync (if you made your choice after iTunes has reached the Podcasts step).
    If this does not address your issue, try alittle less drama and a bit more information about which steps you have made, and what did not happen that you expected to happen. Then we might get somewhere.
    Mac Daddy\'s Nemesis wrote:
    I fear Apple inc wants to force me away from my perfectly functional 2nd gen ipod by not supporting it properly in itunes.
    Fear not, it is properly supported.

  • 2nd gen ipod touch sleep/wake button will not work

    Like the title says, the sleep/wake button (top button) doesn't work on my 2nd gen ipod touch. In short, I can't put it into sleep mode (I have to wait the one minute), turn it off to save the battery, take screenshots, or even reset it (without iTunes, anyways).
    I don't have any guesses on why it's not working. It just stopped working one day. I don't see water damage (via the water damage detector in the earbud jack), and I don't think I dropped it in a way that would harm it (unless dropping it on carpet counts).
    I should also mention that randomly, one day after school, I was messing with it, and the button worked. I think the battery had died, and I managed to turn it on then. It worked for a few hours (I charged the battery), and then it went back to not working.
    The warranty's up (and I'm broke), so I can't repair it. I also want to point out that the problem started not long after the warranty expired. What, at this point, is my best option? Should I just save up for the newest model? Or would it be cheaper and more efficient to save up just enough for a repair? Any other options I should consider?
    Thanks in advance.

    As I said, you can move on to Restore. Backup everything then Restore as New. Restoring from backup would just copy whatever software issue you may have. But it sure looks more and more like a hardware problem. Take a close look at the button to see if perhaps some dirt particles are stuck there.
    You can also make an appointment with a Gnius at the nearest Apple store to have it diagnosed. Apple does not fix iPods, they just replace them with refurbished units, so it won't be cheap. Prices are here: http://www.apple.com/support/ipod/service/prices/
    You can Google for third part repair hops or do-it-yoursel kits.
    Good luck.

  • Ipod shuffle 2nd gen wont sync music it always gets stuck on a different song everytime and the puts the ipod into recovery mode!

    Hey guys
    My dads 2nd gen ipod shuffle will not sync music. I try to sync the music by autofill and manually and it freezes for a long time,and then says the device cannot be found. It then puts the ipod shuffle into recovery mode and i then have to restore the ipod and loose all the data.

    The shuffle may be losing its data connection to the computer during the time it is syncing.  If you have not already, you should shut down (power off) the computer.  Disconnect all USB devices (except for standard keyboard and mouse if normally used), including hubs.  Do this to Reset the shuffle
    http://support.apple.com/kb/HT1655
    Start up the computer, run iTunes, and connect the shuffle to a direct USB port.  Try repeating the action that is causing the error.
    If that does not help, select the shuffle in iTunes and go to its Settings screen.  There is a checkbox for Enable disk use.  If that setting is checked, uncheck it.  If it is not checked, check it.  Basically, reverse the current setting.  Apply the change.  See of that makes any difference.

  • 2nd gen ipod shuffle will charge with one computer (vista) but not the other computer (windows 8).  Please help!

    My 2nd gen ipod shuffle will charge on my old vitsta computer but not my new windows 8 computer. Does anyone know why that might be? The new computer recognizes the ipod and I can see everything on it, change settings, etc. it just won't charge. Is there a reason as to why this should be happening?

    Just bought a refurbished 2nd generation ipod
    shuffle. I am running the very latest version of OS X
    and iTunes on an iBook G3 600 mhz with the slower USB
    ports, not 2.0 ports. The ipod mounts and is
    regognized by itunes, but I cannot seem to register
    the ipod from itunes, it always has an error message
    when I submit to register (all forms are filled out
    correctly). The registration window in iTunes shows
    that this ipod is formatted for Windows (from the
    previous owner I assume) and may be causing my
    problems?
    No. ALL shuffles are FAT32 format.
    The other problem is that it will not sync and
    transfer any music from itunes library. I am trying
    to transfer simple mp3 files that should be compliant
    with the ipod specs. No luck even after multiple
    restarts on the ipod. Any help would be appreciated!
    Thank you.
    Try this: http://docs.info.apple.com/article.html?artnum=305204

  • Convert 2nd gen iPod from Windows to Mac

    Hi, my 2nd gen iPod (touch wheel) is in Windows format. (I know, I know). It's the only iPod I have that is not recognized by my Mac.
    It works fine, but I don't have a Win system with support for firewire except for one running Win7, and that is not (yet) supported in Xplay.
    Now that I'm Macified I'd like to restore the iPod to Mac factory default. Is this doable? iTunes doesn't presently recognize it as an iPod, OS X sees it as a disk drive so the cabling and ports are o.k.
    Thanks for any suggestion you'd care to make.

    Hello there,
    First of all, I would like to note that using a Windows formatted iPod is possible on your Mac, because Macs can read and write to FAT32. So you don't necessarily have to reformat it. However, if you would still like to format the iPod to Mac's native format, I would Disk Utility. For instructions on how to do this, see this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    After reformatting, you will have to restore the iPod through iTunes. If iTunes still does not recognize the iPod, I would maybe check out this article related to the issue and follow the troubleshooting steps provided.
    http://support.apple.com/kb/TS1410
    Hope this helps.
    B-rock

Maybe you are looking for

  • Bridge not opening

    I started having this problem on PS CS3 but have recently upgraded to CS4. When I open bridge by itself or through PS, nothing opens at all and I get the box saying it has encountered a problem and needs to close. What could be causing that? Also re-

  • Regarding Run operating system command

    Hi experts, I have a requirement of creating an empty file onto the same folder where my reciever file adapter writes the result file. Is it possible in case of FTP as well or is just supported for NFS? Regards, Amol

  • Lost pictures not backed up

    I lost my Iphone. I did not back up my pictures on icloud.  Is there anyway to retrieve them?

  • How to scan an image bottom to top?

    I know how to do the top to bottom, but the oposite complains about ArrayIndexOutOfBoundsException I try something like: for (int y = height; y > 1; y--){ for (int x = width; x>1; x--){ any ideas? Edited by: gmf on Nov 15, 2007 6:12 PM

  • Type quality

    I've just had my first book delivered from Apple. The picture quality is great; but the type is rough. It's not quite bit mapped quality, but not far off and unacceptable. The design was produced in iWork "Pages" and the print option "print to iPhoto