My 4s is dropping calls when switching towers- my 3GS did not have the same problem in the same areas?
This 4S is a major step backward for my compared to my 3GS- Less battery life, much poorer ability to switch signal types without losing the call. What are they thinking adding all these bells and whistles without making a damned battery that can get through a full day and an antenna that can handle a variable network? This stuff was solved YEARS ago by Blackberry.
I've done the location off fix for the battery- no help whatsoever. Any ideas on the tower change call drop problem?! Very frustrated that I spent $400 on this POS
...and the fact that I'm locked into this thing for 2 years is absurd when it's so flawed. What a scam.
Similar Messages
-
I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that I am not authorised to do anything on the account in relation to the transaction. What should I do?
You can view and edit your orders without an Apple ID by logging in with your order number, along with the shipping zip code or email address.
I copied the text posted above from this website.
http://store.apple.com/us/help/viewing_changing_orders
Click or tap on the Order Status link here and you should be able to type in the order number and your zip code.
To view or edit your Apple Online Store order, visit online Order Status and log in with your Apple ID and password. -
I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS. Apple, you have a quality assurance issue. Don't be like Microsoft where they send out pieces of junk with testing it.
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Ok now when I zoom in iBooks in PDF then my pixels get a little weird and the text is not cripy and sharper like it was months ago.. And i was reading same pdf which I used before and when I go to safari and full zoom a very little pixels are not clear. pls help
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) -
Having used the beta 4 version of Firefox, the screen pop up kept insisting to upgrade to the 4.0 beta 5 version. I finally went ahead and did the update, and have had the above issue since.
Firefox 4.0 has not been in Beta testing for months now as it was released back in April and you appear to be posting with Firefox 5.0
Are you using the Firefox 5.0 which was released June 21 and is at www.mozilla.com ?
As for the sudden reboots well it could likely be a issue with hardware or dirver (for graphics card for example) or even a runlevel software as a application like Firefox itself does not cause Windows to reboot. -
The apple store has changed my I broken Iphone to a new one. But when I got it, i did not have all my purchased songs and apps in it.
You will need to plug it into your computer and re-sync them from iTunes. The iPhone is meant to be synced/backed up to iTunes on your computer on a regular basis. It is NOT a primary or backup storage device.
-
I have a new IPhone5c and do not receive texts or calls sent from my daughter's phone; I'll call this phone 2. We did not have this problem with my old Envy Touch. Verizon is our provider. Can you troubleshoot? My other daughter has a new IPhone5c too. She receives calls and texts from sent from phone 2. Any tips for remedying this problem?
Thank you.Turn off iMessage in your phones settings. Apple devices can only use iMessage to other Apple devices.
Turning off iMessage will allow the messages to go as regular text messages. -
When switching spaces application menu is not showing
I'm not sure the is a Snow Leopard specific problem, but I have certain applications assigned to certain spaces. When I switch to a space for that application and it has an open document, everything is fine. But if I close all of the document windows for the application and then switch away from that space and then back to that space, the Finder menu takes over. The application is still running, but I have to either click it's icon in the dock or cmd-tab to the application to get it's menu or toolbars to appear.
Is this normal behavior? It's kind of a pain to mak sure that I at least have one open document window so that when I switch back to that space I don't have to "reactivate" the app. Just so I make sure i'm explaining this correctly...
I have Photoshop in it's own space and then open the program and then don't open a document window and then switch to another space and then switch back to the Photoshop space, I now have the Finder's menu displayed and a blank desktop showing. I then have to click on the Photoshop icon or cmd-tab to the running application to get it's menus and toolbars to show.
Thanks for your help.
MarkFirst off, I meant to title this "When switching spaces application window is not showing."
Just in case anyone else runs into this problem or any other weirdness with switching between spaces, the answer seems to be trashing the com.apple.dock.plist file and then restarting the dock. The preferences file can evidentially get corrupted and create some problems. Spaces does not have it's own plist file but stores it's data in the dock's plist file. Be warned that this will reset all of your dock preferences including which apps you have on the dock.
Mark -
When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?
Try these places:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101
https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718 -
I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update. Before the update if i had minimized windows they would stay minimized when i opened a new window. Please help ,I would guess it is just a setting somewhere but i cannot figure out where the setting is. Thanks jason
This issue can be caused by the ASK.com Toolbar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
My service was interupted DAILY between 2:45pm - 6pm and sometimes 7pm. I contacted someone in the chat room and explained, they said they would send someone out and there would be NO CHARGE...I made sure and they said, Rest assured that there will be no charge" They did send someone out, around 11am, and said, hey, it's a gold signal splitter, I'll replace it with this new one. Well, they did. A few minute job. Well, 2:45pm rolled around and guess what? SIGNAL LOSS on tv and cable...till about 6pm. Well, next day i contacted them, and same scenario. They sent someone out-around 12pm, and said, oh the coaxial connecters are a "little loose". Well, he tightened them...a few minute "fix". Well, 2:45pm rolls around and AGAIN SIGNAL LOSS, no internet and NO TV till 6:30pm. Well, I've had enough so I cancelled service..Now I check my bill and 2 service calls for $70 each plus $15 tax totalling $155. I talked to someone in the chat room and told them this scenario. Well, they said they can waive 1 of the service call, but since my equipment is owned by me and not rented, I have to pay and that in their notes, it never said that I would get a free service call. The problem is that it NEVER was fixed and the problem had nothing to do with the signal splitter or connections, but something in the neighborhood, in which I saw 2 Xfinity service trucks on my street when I came home. So I am out $85 for something they did not fix-apparently something going on connectionwise in the neighborhood. ALSO WATCH OUT FOR CHAT ROOM REPS THAT SAY IT WILL BE A FREE SERVICE CALL. THEY LIE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Anybody know how I can contact the CEO of Xfinity?I was also billed on July 15, 2014 for tech support that did not fix my computer problem.
I was billed $99.99 to my credit card to a tech in the country of India.
I tried to get my money back but the number I was referred to would not answer.
I immediately went to my bank which took all of the info and changed my credit card number.
The bank also did their own investigation and said it seemed to be a scam. My money was redeposited into my account within 36 hours - not because of anything Verizon did, but my BANK!! I was so grateful.
Such service from Verizon's tech department is unethical and inexcusable.
Verizon customers deserve better tech service than this. "Ma Bell" would turn over in her grave if she knew how far down the service of the original phone company has gone. It's a disgrace!! A SCAM perpetuated and sanctioned by Verizon.
I complained to the Verizon Customer Correspondance Claim Dept. Do you think they will straighten this mess out? I doubt it - I am a retiree with an excellent payment record.
They don't care. This hurts the American economy. -
Error 3014 when trying to load ios6. I have cleared 2.5GB on the phone (4s) as it seems you need that ridiculous amount of space. Every time it just gives me 3014 error code within a minute of trying to download? Any help?
All,
I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
Thanks,
Clif Bridegum -
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!
I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...
-
When going to update it says there is a billing problem with the previous purchase when I go to update it still won't let me download and all the info is correct. How do I fix this?
You have to email iTunes Store Support about this issue now. You can get started here. Change the country in the upper right if necessary.
https://ssl.apple.com/emea/support/itunes/contact.html
Maybe you are looking for
-
A fatal error occurred preventing product use, LaserJet Pro 200 color MFP M276nw
When trying to install the full printer software suite, as soon as I click the button to install after the .exe is extracted, I get an alert window with, "A fatal error occurred preventing product use." No error code, just an option to close the dial
-
Missing functionality - Bank statement processing - details
Hello When using the Bank Statement Processing in SBO 2007, you have 3 fields for additional references: 1. Reference: this is copied into the journal entry in Ref3, but you only have 8 characters. However, the Ref3 field is 27 characters. So why lim
-
Is there a way to have a key figured sorted automatically in a query without using a condition? I'm trying to set up the Sales Quantity key figure so it is always sorted in descending order when a query opens. I'm using BI 7.0 on the portal. Thanks!
-
Hi Mr Rajesha , I read ur ans. on thread of "BOM". Can we give the default seting for T-code Co11n for particular user. I want default exucution start date and time with exe. finish date and time in CO11n. wat i have to do for this? Please suggest. t
-
I still haven't found a satisfactory answer to this problem. That problem raises lots of complaints but apparantly Apple doesn't care...