My Airport Express will not update from 7.4.1 to 7.6.1.

No matter how many times I press the button, the update never seems to occur. Anyone have any ideas?

Power-Cycle it, including your device.
If it still doesn't work... factory re-set and start from there.

Similar Messages

Airport express will not update firmware.

The unit works fine, it's about one month old. Every time I open up the airport utility it says that 'This Airport Express should be updated to the latest firmware. Current version: 7.4.1 Available version 7.4.2" I've run this update at least four times and every time it completes 'successfully.' Upon returning to the airport utility mainpage, it just says the same thing again. It's just stuck at 7.4.1.
Any ideas?

Welcome to the discussions!
I've been able to fix this issue in the past by doing a factory default reset on the AirPort Express and then updating the firmware before reconfiguring the device.
To do this, power down the Express
Hold in the reset button and keep holding it in as you plug the device back into power
Release the reset button after approximately 10 seconds
You can also return the device to factory defaults when it is selected and you have AirPort Utility already open. From the Base Station menu at the very top of your screen up by the Apple icon, select Restore Default Settings
It might be a good idea to temporarily connect an ethernet cable from you computer to the Express to help AirPort Utility "discover" the device once you have done the reset.

Airport Express will not update

My Airport Express is 7.4.1 and over the last two years where it asked me to update to 7.6.1, it never works. Why?

I have had a similar problem with one of my AEX's.
The hard reset & direct ethernet connection would not allow a reset or a firmware update.
I have just discovered that if one hovers over the device at hand when it appears in the Airport Utility list (column on the left) & right-click (or control-click), a virtual menu appears that includes "Restore to Default Settings," which was successful. The device was ethernet-connected for the reset & once it was restored I was able to update the firmware to 7.4.2.
It now is back in working order wirelessly.
Hope this may be of help to others!

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

IPad 2 will not update from version 4.3.5 (8L1).

I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

Naalamc wrote:
It's an ASUS, Windows 8, Version 11.1.3.8
Thank you.
Your iPad has iOS 4... See Here > http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

HT201210 My ipod touch 2 gen will not update from IOS 4.2.1

My Ipod 2Gen will not update from IOS 4.2.1 keeps saying this is the most up to date software. Does the 2 Gen Ipod not allow anything higher than 4.2.1. HELP PLEASE!!!!

iOS 4.2.1 is the highest supported iOS version for the iPod Touch 2nd Generation.

My iPhone will not update from version 4.1

My iPhone will not update from version 4.1, everytime I try to update on the iTunes iPhone screen, the response says "your iTunes version is current"....I am not trying to update iTunes, I just want to update my iPhone. How do I fix this?

You must purchase 10.5.8 from an Apple store, either in person or online. You can also update to 10.6.8 (Snow Leopard) if you have an Intel Mac. The current version is Lion, (10.7), but you must have Snow Leopard installed to upgrade to Lion. You also need an Intel Mac.

AirPort Express will not extend Wireless Network

Hello. My airport express will not extend my wireless network. It was green for about the first 4 hours and then I've had a flashing yellow light since that time. I've reset it a bunch of times and even have the AE in the same room as my AP Extreme. I complete the setup and then it continues to flash yellow. Can ayone give me a hand?

In the cases where the AirPort base stations would be interconnected by Ethernet you want to configure then for a roaming network, NOT an extended network. Apple uses the term "extended" when the base stations use wireless connection. Regardless of naming convention the end results is pretty much the same.
The link I provided should provide you with the necessary steps to set this type of network up.
If you need additional help, please start a new post as the solution for you will be different than the OPs. Thx!

Airport Express will not talk to my router

I have 2 airport express stations that are 6.3 and they have always been able to connect to my qwest wireless router no prob. I've recently updated to Leopard and was surprised to see the new airport utility instead of the airport admin and airport setup tools. I like the new utility and interface as it seems less confusing than the old but now I'm having issues.
1. I can get the new utility to recognize my airport express ONLY when I do a hard reset to the airport express.
2. As I've done many times in the past, I go through the following setup protocol to join my current wireless network. I simply want to join my current network so I can talk to my stereo and printer wirelessly.
3. When I finish the setup and hit update, the airport utility updates the express successfully and then attempts to restart the express in order to join my network. This is where the problem lies.
*Here's the error message I get:*
AirPort Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.
Now, I've tried repeating this process 10 times with both airport express stations and the same result happens? Remember, the only way for the utility to find the express is to hard reset the express. What gives? I bought both of these express stations over a year ago and they've been working fine til now. Because they are older and updated to 6.3, I shouldn't update them to the 802.11n7.3.1 update or should I? Is there something different about this new airport utility in Leopard that is causing the problem?
Like I said, I've done this exact same thing many times and its pretty straight forward but I'm stumped.
Anyone? Thanks in advance

I've got the solution! It took me some fair hours, though...
It seems the Airport Express can not handle the WEP-encryption properly, nor the 64 or the 128 bit versions. Here's how to work around it:
1) change your routers encryption to WPA2 with passkey (WPA-2-PSK). You may use the 10-digit code supplied with most routers or any of your own choice.
2) Change all wireless cards in your network to WPA2-PSK. It can take some time to figure it all out, but in the end you'll fix it. I had to download a new driver for my D-Link card DWL-G650 for instance.
3) Do the usual config thing with the Airport Express. Choose to connect to an existing network, apply the 10-digit passkey (be sure to choose the WPA2-PSK-option in the drop down-menu).
4) Off you go! Itunes will find the remote speakers, green lights all over and everybody turns happy...
/W

Airport Express Will Not Reset or Join WDS Network

I have an Airport Extreme which is a WDS main. The Express will not join the network. I reset the Extreme, set up the network again, and did a hard reset of the Express. Airport Utility will not see the Express either from my iMac or MB Pro regardless of whether I connect directly through Ethernet, or wirelessly. The Express flashes amber. I've read the proposed solutions given to others with the same problems, but nothing works for me.
I know I'm doing something incorrectly, but can't figure out what's going on. Any help would be greatly appreciated.
Thanks

A couple of suggestions:
1. do a factory default reset of the Airport Express. Follow the instructions to the letter, which means don't let go of the reset button until you see the four green flashes in a row. This can take a bit longer than Apple's article suggests - up to 10-15 seconds.
2. when setting up the WDS (and I suggest you do this all wirelessly) make sure the Mac, the Airport Extreme, and the Airport Express are all in the same room. I suggest you use the iMac - MacBook Pros seem to have their own share of wireless network problems.

Lync 2013 Photos will not update from AD

I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

I have a 2010 macbook pro 2010 13.3" laptop that will not update from 10.6.3

I have an Apple macBook pro that will not update at all. It is a 13.3 model the initial load is 10.6.3. The battery is dead as well and the pram seems to not hold as well, time reset even when plugged in on restart. any update leads to the spinning wheel freezing, and i mean freeze even the dvd drive stops working completely. Any ideas?

You can update to higher versions of Snow Leopard by applying the combo updates, anyway. Your predicament may come from the fact that a prior update didn't install properly, and is blocking the install of other updates. You should download the combo updates from Apple's website, and apply them.
You'll find the 10.6.8 update here. You'll still have to apply the various security updates that have been released since, if any.

Does anyone know why my 2nd gen iPod calendars will not update from my Macbook pro starting as of Oct. 20, 2012? I tried restoring to factory settings and genius's did DFR type restore....no results.

As of Oct 20, 2012, my calendars will not load from my Macbook Pro to my iPod. Tried resetting to factory settings and installing just my work calendar... unsuccessful. Genius at my Apple store tried a DFR (?) type reset... still no calendars. All other functions of the iPod is working fine. Any suggestions?

10.8.2. And I have been keeping up with updates, but I thought they all involved fixes to Logic Pro and Aperture (but there may have been an update to OXS...is there any way to see when fixes were released?) The Genius's at our store were stumped and told me to contact Apple.... but without Apple care, I will be charged a fee.... and my iPod is in pristine shape. Is there a way to request Technical support for a problem they are possibly causing?

After Leopard install, all three Airport Expresses will not work...

I have three Airport Express' that worked completely fine before I installed Leopard. After the installation, the Airport Utility will not even detect them. No matter how many times I try to reset them, unplug them, or yell at them, they will not be recognized by the Airport Utility. Currently, all three units are completely useless and just flashing amber. I have tried to look through the topics to see if anyone else has the same issue but, I could not find one that seem to be a duplicate of this problem.
Please help.
-F.

My guess - are you trying to connect to them wirelessly?
If so, the only solution I found was to hook them up with an ethernet cable to the Mac.
Airport then finds them OK and you can upgrade the firmware / software to latest versions.
Hope that helps
Andy

No matter what I try, Camera Raw will not update from 8.3 to 8.4.1 in PS CC

I've tried completely uninstalling Bridge and Photoshop CC and reinstalling and I'm still on Camera Raw 8.3.
It just will not update.
I also tried the link to manually install and it just says the patch is not applicable.
Any ideas why even after completely removing and reinstalling both Bridge and Photoshop my Camera Raw will not update?
Thanks

When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply. Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum. So as you say, I had not read the thread, because it was on a forum I didn't subscribe to. So be shocked and perhaps awed as is necessary. My treat.
Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
Keeping Photoshop Up-To-Date
You might check what version of PS-CC you have. 14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know.
If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates. It may need to be run several times.
Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
The CS Cleaner can be found, here:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

My Airport Express will not update from 7.4.1 to 7.6.1.

Similar Messages

Maybe you are looking for