My book order does not complete

When I purchase my book and the order is in the "assembly" and "upload" process, it does not go through !
this is how it stays for the whole night until a window appears that the order was canceled ! this has happened
several times !! what should I do or what is the problem ?

This is the iPhoto for iOS forum, and I don't think you can order books from it. Suggest you post your question in the regular iPhoto forum.

Similar Messages

My book order gets stuck with the message 'your book order is not complete'

hi,
while trying to place my first order for a book, I get the message above, with the message that the book order is still being sent to the publisher.
during the book submission, I went through what appeared to be a re-registration (although, using the same details, the right information seemed to be picked up in later stages of the process.)
I am using Aperture 3 on Lion (10.7.1)
oddly, I can't get into my 'order status' part of the Account part of the Apple store either.
i'm not sure if something is incomplete, or what!
anyone have any ideas, or has experienced this in the past?
regards,
Nick

It seems that closing the application gives you the opportunity to cancel an 'in progress' book submission - the only way that I have come across.
Going in again and re-submitting has *thus far* done what is expected - I am now waiting for my confirmation email.
The address change screens are a bit of a mess, but that should not really make a huge difference if you are not having to change addresses - tabbing around the fields makes some sense of it. (apple, you may well want to fix this - contact me if screen shots would help)
Nick

Aperture book order does not go through

Hi, when I press "Buy Book" and make an order, I get a page that says "Your Order is Being Sent", but it just stops there.
I've tried on 3 different occasions but I never can make the order go through.
Can anyone please help?
Thank you!

After multiple tries, it went through.

When I rearrange the order of my photos in an album, the order does not stick for exporting for a book.

I manally rearrange my photos in an album, the order does not stick when I export to a folder in order to make a book. Also, if I have given a title to a photo, it does not seem to export with the other pictures in an album.

It's a little vague on what you're workflow is. So I'll make a guess about the book: if you're dragging those photos into an iPhoto book they will be sorted by date. So you would have to use the Photos ➙ Batch Change ➙ Date (with 1 minute between photos) menu option on those photos in the album before dragging them onto the book icon.
Photos exported to a folder on the hard drive will be sorted by the Finder either alphanumerically or chronologically. To get them in the manual order that's in the album you'll need to rename them via the Photos ➙ Batch Change ➙ Title to Text with a sequential number added to each photo. Then export to the Desktop with the option to use the Title as the new File name.
OT

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Visual Approval Action does not complete

Hello,
I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
"Cannot complete action: The activity could not be read"
When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
Any help would be highly appreciated...
Regards,
Anil

George,
Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
Please help.

Error of PO - "Purchase Order Does not exists"

Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!

there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

My Mac Book pro does not recognise the wi-fi net. How to fix it?

My Mac Book Pro does not recognise properly the Wi-Fi net at home. I've tried many ways in "preferences", but it realy does not work. When connected in the Ethernet port, it works perfectly.
Don't have any problems with other computers at home.

I don't know what you mean by "doing new concessions on DHCP"!!??? Have you tried using a static IP address to see if it works that way? Have you restricted the range of DHCP addresses available at your router? If you have maybe the other computers have used up the available range. Suggest you try a static IP address first, then we'll take it from there.

I can't get iWeb started. It does not complete the starting procedure

I can;t start iWeb. It does not complete the startup procedure, and then becomes frozen. I've installediWeb 3.04, but same results. What can I do?

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
Happy New Year

My book order does not complete

Similar Messages

Maybe you are looking for