My calendar date is not automatically changing, what's the proper setting?
My calendar date is not automatically changing, what's the proper setting?
If the population of the ObservableList (independent of any UI considerations takes a long time, then you probably want to do the populations off the JavaFX application thread (e.g. via a javafx.concurrent.Task)).
If you do populate the list in a Task, standard threading cautions apply in terms of not updating items in the scene graph off the JavaFX application thread and ensuring that the system is absent of race conditions, etc.
Look over the documentation of http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Cell.html and that may help you.
The JavaFX controls such as ListView have been carefully designed to exhibit high performance even when backed by extremely large lists (through the concept of virtualization explained in the Cell documentation). For example, if the backing list is updated but the portion of the list being updated is not within the currently displayed list contents, (I would hope) the update would be very efficient.
Similar Messages
-
Ownership/Group/Permissions What is the proper setting for free access?
When we first get a customer supplied disk, it is copied to our G5. It looks like whomever is logged into the G5 and copies the disk becomes the owner of that folder and their permissions are applied to the enclosed copied files.
We never know who will wind up working on these files and I want anyone to have free and open access to the files.
So what it the proper choice under the ownership & permissions?
My thinking would be:
Owner = System
Group = Everyone
Access = Read & Write
There are bunch of acromyms under these pulldown menus which mean nothing to me.Choosing 'everyone' and 'read & write' should work fine.
You could change the owner to 'system', but there's no need. -
What are the proper setting for connecting a mic to the line out?
How should I set this up in my system and garageband preferences?
http://thehangtime.com/gb/gbfaq2.html#micline
-
What Are The Proper Settings In Audio/MIDI Setup?
In the Audio Input, Line In, what is the proper setting for Hz? 44100, 48, 96, And should the 2ch be 16bit, 20bit or 24 bit? Right now I'm using an older gray iMic as the Audio in
ThanksSteve B5 wrote:
what is the proper setting for Hz?
44100
And should the 2ch be 16bit, 20bit or 24 bit?
16 is standard, 24-bit (new to GB4) is the highest resolution -
the songs on the iPod on Itunes are grey and can not be changed while in the library are ok, what happen?
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content. -
i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?
Have you went to Settings>General Time&Date and correct the time. Make sure the time zone is correct too. Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.
-
Data Associtions not enabling while i am trying to do data mapping with data Associtions in BPM studio what is the reson?
Shouldn't @StartDate be an input parameter to the stored procedure? @RunDate also?
Example for sp with parameters:
http://www.sqlusa.com/bestpractices2008/stored-procedure-parameters/
The last error will go away upon a successful sp compile.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.
I have this exact same issue!
I was on 2.0.1 running fine until late last week, noticed emails would not show up unless I had opened them in outlook. I thought I ran into a bug so I upgraded to 2.0.2. Now I can sync my email if outlook had them opened previously, but no calendar or contacts at all. I don't think my exchange admins will move me to another server, any other ideas?
I love my iphone but if these features don't work I can't use it. I would appreciate any ideas. -
On my mini ipad, when I'm on the internet -- a few times I will see a blue small pop-up boxes telling me to allow down/load or add something like the bubble-splash game or something similar. I jusr click ignore and it goes away.. I'm not sure why it's showing up lately.. I'm not sure if it's a virus or hacked in or a web brower matter..
Should I go to the cookies/histories in the safari setting and have it cleared out? Will that help resolve that??
And what does the advance-setting of the clearing the website data does? Sorry, I'm not familiar.. what's is that used for? Should I use that feature as well?? Thank you!This indicates corrupt files.
A restore should resolve. -
What is the proper way to convert a VHD from dynamic to basic without losing data?
Hi,
What is the proper way to convert a VHD from dynamic to basic without losing data?
Our VM is running Windows Server 2008 R2 SP1
Thanks in advancedHi efebo,
"After you convert a basic disk to a dynamic disk, you cannot change the dynamic volumes back to partitions. Instead, you must delete all dynamic volumes on the disk and then use the
Convert To Basic Disk command. If you want to keep your data, you must first back it up or move it to another volume. "
Please refer to following link:
http://technet.microsoft.com/en-us/library/cc731274.aspx
You can try to backup the dynamic volume via Windows Server Backup then restore it to a new basic VHD file ( the space is recommended to be larger than or equal to the old one ) .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
What is the proper way to change rowHeight? (possibly animate?)
What is the proper way to change rowHeight for UITableView? I set tableView.rowHeight and do a [tableView reloadData]. Is this necessary? Also, is it possible to animate the height change? It is not a standard transition.
Not a perfect solution for your animation question - but....
in the function where you want to change the height
WARNING PSUDO CODE
//indexPath is the path for theCell you want to edit
thePlaceThatYouStoreYourHeights[x] = aNewHeight;
[tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade];
[tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationTop];
and inside of - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath (NSIndexPath *)indexPath
return thePlaceThatYouStoreYourHeights[indexPath.row];
Basic flow
1. Store new desired height somewhere
2. Remove the cell deleteRowsAtIndexPaths
3. UITableView paints the animation for the "remove" transition **see note
4. Re-add the cell insertRowsAtIndexPaths (which subsequently kicks of a call to heightForRowAtIndexPath before animating)
5. UITableView paints the animation for the "add" transition
You do NOT need to call reloadData to get this to work.
**note: an enum such as UITableViewRowAnimationNone does not exist (it should but it doesnt seem to). the docs for InsertRowsAtIndexPaths say "A constant that either specifies the kind of animation to perform when inserting the cell or requests no animation." however there are only 5 items in the UITableViewRowAnimation enum and UITableViewRowAnimationFade resolves to 0 - so passing NO will actually get you fade. Nor will it take nil.
Hope this helps shed some light. -
What is the proper way to change a url link?
I need to tell DW to change all url links (on all pages) going to an old url to a new url. What is the proper way to do this? thanks.
Did you even read my reply properly?
'Defining a site' in DW has everything to do leveraging most functionality with FUNDAMENTALS of DW usage.
'Change links sitewide' is an option within DW that will change links across sites by replacing an old link with a new - for DW to do this for more than just ONE FILE in your site, DW has to know what other files make up your site. This is why 'Defining a site' is critical.
If you do feel otherwise, please go ahead and wait for somebody else (an expert) to post his views on this. Let's see what they have to say.
Either which way, I really think you should change your attitude while posting on this forum. That will not only help you, but all of us here.
Good luck. -
I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response
Hi ..
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Make sure your Mac OS X software is up to date.
Disconnect the iPad from your Mac.
Open System Preferences > Software Update > Check Now
If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices. -
i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you
Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
I cleared the cache and my site does not update! What's the secret?
I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginningshello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.
Maybe you are looking for
-
How to Validate or test SJW parameter For HS CAN Node?
Hi All, To paraphrase the Question asked in the post, If the CAN parameters for Baud rate, Tq, BRP ,Prop Seg 1, PRop Seg 2 are all programmed with proper Tq. How to test them ? I have worked on CAN Stress Tool to test Sample point of a CAN Bit for a
-
Ist mein MacBook Pro, 15", 2,53 GHz, Mitte 2009, mit der CS6 kompatibel? Welche Probleme gibt es dabei?
-
All my projects have been made using a Sony FX1, WHICH IS not A FULL HD camera. I want to replace the camera with a EX1 which it full HD. Will I be able to finish of projects that were shot with the old camera and join the old and new footage togethe
-
Strange behavior in the top link bar and open in a new tab
Hello, I am having a strange behavior in the top link bar. Every element in the menu has the "open in a new tab"-option checked and is working fine but is not working at all in a sub site which inherit the menu. I have look at the code thinking that
-
%@ include file="invoiceFtpPush.xhtml" % in jsp
Hi All, I want to include my xhtml page into my jsp page like : <%@ include file="invoiceFtpPush.xhtml" %>I want to know is it possible or not? if not possible then any alternative or if possible then how can i do it? Right now it is not working. Any