My canon mp240 won't print since I started using 10.7

I can't use my Canon MP240 since I upgraded to 10.7.2?? Why not? Please help me

Depending on which version of Canon's printer drivers you are using, you may need to download and install the latest version to work with the Lion OS:
http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_serie s/pixma_mp240#DriversAndSoft0ware
Hope this helps

Similar Messages

My Kodak AiO 3250 won't print since installing OS X Yosemite.

My Kodak AiO 3250 won't print since installing OS X Yosemite. I get error message on printer, "An unexpected error occurred. Check for problem at the printer a ..." Dialogue box ran out of space, couldn't determine the whole message. I've contacted Kodak, no response so far. Any other suggestions?

Hi guys,
This is not Apple's fault. Kodak is the one responsible for updating drivers for their new printers and from what I have heard Kodak is pulling out of the printer business and are behind on updating their drivers. This video on how to install a new printer might help and explains how sometimes old drivers can still work if you don't use air print.
-crazy

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I upgraded to 10.9.2 and now my Canon MX870 won't print. Their driver site only listed drivers for 10.6. How do I make this work?

I just looked at the Canon site and it has Mavericks drivers.
http://www.usa.canon.com/cusa/macosx_lion/multifunction_printers/pixma_mx_series /pixma_mx870?selectedName=DriversAndSoftware

Canon ip6600D Won't Print

Brand new Canon ip6600D won't print through iPhoto, specifically print job tries to print but after approx. 10 seconds of trying it defaults to "job stopped." Prints fine through Web browser and all other apps. Are there hidden iPhoto printing prefs somewhere that can be deleted? Previously had a Canon i990 printer and never had a problem with it. Thanks for any suggestions.
iMac G5 Mac OS X (10.4.3)

Aaron:
All I can think of is to remove the Canon print drivers and then reinstall them. You might go to Canon's site to see if there is a newer driver than what you've got. Also run Disk Utility and repair disk permissions. You might try that first.
If neither help I would run OnyX and clean out both the user and system caches. Your first restart afterward will be slower but will get back to normal on subsequent restarts.

Canon iP8500 won't print OSX 10.6.3 apps

My Canon iP8500 won't print OSX 10.6.3 apps, it causes them to crash. It crashes Safari, Mail, Text Edit. Other apps (Excel, Word) print fine. I've updates to the new driver (10.30.3.0) to no avail. Any suggestions?

Try opening Disk Utility, selecting the OS X partition and then pressing Repair Disk Permissions.
You could also try opening Print & Fax, moving your mouse over the Printers list, and while holding down the Control key, click your mouse. This will make the Reset printing system pop-up appear. Select this and restart your Mac. This action will delete your printer queues but not your printer driver. So you will just need to open Print & Fax again and add the iP8500.

HT3669 Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this opt

Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

HT201250 My mac cannot access to the backup disc since I started using os 10.7.4

Hi all,
Since I started using os 10.7.4, i cannot use time capsule to back up.
"The backup disk image “/Volumes/*************/*’s iMac.sparsebundle” could not be accessed (error -1)."
WIll this issue be fixed if I upgrade to Mountain Lion

I've tried but the situation is same.
First, back up disc is supposed to be appeared on the desk top when I start backing up but it's not.
For some reason I cannnot access to the back up disk.
I delete the old record in key chain and fix the name of network, my mac not to contain "'s".

Ever since I started using icloud I can't save any pictures to my phone. Why?

Ever since I started using icloud I can't save any pictures to my phone. Why?

Let's find out what's going on sylfle! Are you able to edit photos when you aren't saving to contacts? When did this start?
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Since I started using Lion (10.7.2) I'm prompted to type my password if I want to add a folder or put something in the trash. Is there a way to stop this from happening?

Since I started using Lion (10.7.2) I'm prompted to type my password if I want to add a folder or put something in the trash. Is there a way to stop this from happening?

It sounds like the permissions on your Home folder are snarky.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
Restart Lion and hold down the Command and R keys.
You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
In the Terminal window, type resetpassword and hit Return.
The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

TS3276 why do my email messages disappear from my inbox since I started using OSX Mountain Lion on my mac?

Why do my old email messages disappear from my inbox since I started using OSX Mountain Lion on my mac? These are not messages that I have deleted on other linked devices such as my iPad.

Why do my old email messages disappear from my inbox since I started using OSX Mountain Lion on my mac? These are not messages that I have deleted on other linked devices such as my iPad.

I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

Deauthorize all, then authorize the active computer.

Firefox sync worked fine until I upgraded Firefox to version 5.0.1, then all my bookmarks added since I started use Firefox sync dissapeared

Since I upgraded to Firefox 5.0.1 all bookmarks I added since I started use Firefox Sync dissapeared, only old bookmarks remain. Before upgrade syncing worked fine.

Install the following Add-on until Google releases a new version of their toolbar that is compatible with Firefox 5. Google needs to test their toolbar with Firefox 5 and change one line in their code to make it compatilbe. Most Add-ons that worked with Firefox 4 should still work with Firefox 5, but the developers need to update a line in their Add-on's code to indicate with which versions of Firefox the Add-on is compatible. The following Add-on adds a "Compatibility" button in your Add-ons > Extensions that you may need to click after installing it and restarting Firefox.
*Add-on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/15003

8500A won't print since I replaced ink cartridges.

Hi. Ever since I replaced all the ink cartridges (with genuine HP parts) on my printer it won't print except very faintly in two of the colours, and not at all in the other two. I've cleaned the printheads, and tried to align the printheads. Aligning the printheads failed. Why would the printer suddently stop working after replacing the cartridges, and what else can I do to fix the problem? I found a page about replacing the printheads, but can't find any info any where about where to buy these parts or how much they cost. I tried to find a repair place near me but the search came up with no results. Any help you can provide would be appreciated.

Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet Pro 8500A, on Windows 7, after replacing your Ink Cartridges. I am happy to help! Please, try the steps within this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series. If the guide does not resolve your issue, Please contact HP, phone support for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Officejet 8600 won't print since Yosemite upgrade

I have a problem installing the HP driver since I updated Yosemite. I get these messages.
So I can't install properly.
I have delted the printer in the system preferences, repaired disk permissions, and reinstalled 3.0 driver. The messages above are what I receive during installation.
What I am experiencing regarding printing is my second print job won't print until I put the computer to sleep and then open it up again. The weird thing is is it will print my first job even after it has printed it once.
Here is the print list.
This is what I see... Opening printer connection shows at the top all the time. The job that is listed will print and then say 100% complete when it is finished printing. Then when I send another job this is what the list looks like:
The second job listed won't print until I put the computer to sleep and then it will print.

Hi,
From the Applications folder open the Hewlett-Packard folder and follow the Uninstall option to remove the software.
Next click the Go menu (you may have to click of Finder for the go menu to appear), then click on Computer and open the active volume of your OS, that will more likely be listed as Macintosh-HD.
Open the System folder, then open the Library folder
(If the library folder is hidden and not listed, click on Go > Go to folder, type Library and click on OK.
Open the Extentions folder and locate both of the MaxtorPowSecDriver.kext and the IOFireWireMxBt.kext files, copy those files to your desktop and then delete it from the Extensions folder (for backup porpuses be sure not to delete those till you are fully up and running with no issues).
Next repair the disk permissions as following:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, download and install the following software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-125213-3&cc=us&dlc=en&lc=en...
Finally, reboot your Mac and ensure that everything is up and running.. once you have verified it delete the files copied to your desktop.
Please let me know of any difference,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Canon i80 won't print

Having a problem with Canon i80 which won't print. The document goes to the que but does not print. Any suggestions?

Hi tunanut1,
Removing and reinstalling the printer on your computer may resolve the issue you are experiencing. You can also try removing the USB cable from the printer and the computer and then reconnecting the cable to both devices to ensure that the connections are secure, or try using a different USB cable if you have one available.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My canon mp240 won't print since I started using 10.7

Similar Messages

Maybe you are looking for