T-Bird does not spell check the subject line of an email. (v24.4.0).

Hello,
When composing an email I have chosen to have Thunderbird 24.4.0. check for misspelled words with both underline and spell check prior to sending.
While testing I noticed that it underlined and spell checked everything except the "Subject" line.
Thunderbird will underline misspelled words in the "Subject" line but won't look for a correct word prior to sending as it does with the body of the email.
Are you aware of this and is a fix on the way?
Thanks so much
-v-

Absolutely NO themes or add-ons whatsoever on my system. I run the program "as is" when downloaded (v.24.4.0). I restarted in safe mode as a you suggested. I got the same results - no spell checking in the subject line. Spell check drops directly to the body of the email. Spell checked the body fine. Running WIndows 7. I have also uninstalled and reinstalled to see if that would correct the problem. It did not.

Similar Messages

Automatically checking the subject line (AppleScript?)

Hi All
My organisation has implemented protective marking of email - basically all email must have a standard classification phrase embedded in the subject line. I have writtten an applescript which will automatically create a clean new message window in Mail with the appropriate configuration - that's easy. I want to roll this out to other Mac users also, and I want to make it robust. The problem is that if users forget to mark their email it won't get out past the server.
What I want to do is to automatically check all outgoing email (preferably sent in the usual way by hitting the Send button), to make sure the subject line is appropriately marked. If it isn't then the mail should be held up and the user should be prompted to add the required marking. I had hoped to be able to do this via a rule - check the subject line for the marking - and if absent run an applescript to add it.
Is this possible? My attempts have failed - everything seems to be geared towards incomeing or received email. Are there better ways? I have no experience developing plugins for mail - are there any templates out there?
Thanks in advance
Dave Mitchell

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also http://kb.mozillazine.org/Find_bar_opens_when_typing_in_textbox

Can you create a To Do from the Subject line of an email?

Does anyone know if it's possible to create a To Do from the subject line of an email in Mail?
Here's what I'm trying to do. I open a mail message, then I can highlight any text in the body of the message. When I do this, the To Do button becomes enabled. If I highlight the subject of the message, the To Do button remains disabled.
Is there any way of doing this aside from highlighting text, then changing the text?
Thanks!

Open Mail Help from the Help menu. One of the main topics listed is how to create to-dos. Click on it to see what you are able "to do."

I can't open the subject line in my email....when email is sent it has 2 lines of junk in subject box

The subject box in me email does not open to allow me to put in a subject...when I send the email the subject is 3 lines long that I did not enter. Subject lines works in all other broswers...just not firefox.....The wordage is:
var sndplD = "1043"; var sndgID +{0756ECB-CDD8-465-9135-BBEA799A505A}...etc.

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can I edit the Subject Line of an email I've received?

When the sender inserts vague or misleading text in the Subject Line (or leaves it blank), sometimes I'd like to edit it - makes organization and retrieval of information which might be in the email easier for me.
I've tried opening the email file with a text editor (TextWrangler) and editing the "Subject" line. That partially works: When the message is open for reading, my edited Subject appears near the top of the message.
However, when looking a list of emails in a Mailbox, Mail still displays the unedited Subject - which defeats my purpose.
What am I missing, here?
-gw

Hi Gary, I think Mail is using stored info, not sure which of these two hold that, but...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Incorrect PO number in the subject line of a email

Dear All,
Our customer has implemented the PO be email functionality. Configuration is done to get the PO number on the subject line. This works fine when individual release is done. But when we perform the collective release, only One PO number is picked in the subject line of the email for all the Purchase orders.
The following is the customization:
Replacement of Text symbols
Program SAPLMEPO
FORM routine TEXT_SYMBOL_REPLACE
Processing routines for the output type : ZSAPFM06P
FORM Rotine: OLD_ENTRY_NEU
Kindly let me know if somebody has had a similar problem.
Best regards
Vinod

Goto NACE .
u2022 Select EF and click on OUTPUT TYPES.
u2022 Then select Output Type NEU and click on processing routines .
u2022 In that you have to add a new entry - medium 5 .
u2022 Then you need to assign a program, form routine and form.
u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as
TEXT_SYMBOL_REPLACE .
u2022 Now the subject will be PO No. XXXXXXXXXX.
u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
u2022 Now while creating a new purchase order , change the medium to External Send .
u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
u2022 Goto tcode ME9F .
u2022 Execute.
u2022 Select the checkbox and click on Output Message.
u2022 You will get a message MAII 00000000000001 generated .
u2022 Use note no 191470

How do I change the subject line on incoming email

On my old PC I could easily start typing in the subject line of a received email. This would allow me to search for a name later on when looking for an invoice. I dont know how to change the subject line of an incoming email to my imac?

This site tells you how to edit the subject of a message. I just tested using OS X 10.8.5 and it worked, without altering the time & date stamp, or the original sender info.
http://email.about.com/od/macosxmailtips/qt/et_edit_receive.htm
Steps copied below:
Drag and drop the desired message out of Mac OS X Mail onto the Desktop.
Ctrl-click on the message copy on the Desktop.
Select Open With | TextEdit from the menu.
Make the desired changes to the message source.To change a message's subject, look for "Subject:" at the beginning of a line starting from the top. (hint, you can use 'Command-F' to bring up a search window to help you find the "Subject").
Close TextEdit saving the document.
Ctrl-click on the message on the Desktop again.
Select Open With | Mail from the menu this time.
Now select Message | Copy To followed by the message's original folder from the menu in Mac OS X Mail.
Close the message window.
Delete the message copy from your Desktop.
Optionally, delete the original message in Mac OS X Mail. (when I tested this, the original message was no longer there. Not sure what happened to it, but the changes worked without editing the time, date, or original sender information.)

Textfield Title to populate in the subject line of a email button

I need for the a textfield title to automatically populate in the subject line of the email button
What code goes in sub = ?
var sub
sub =
var ebody
Thanks

I created two buttons - one named "Real Email Button"(submit) and one named "Submit Button (regular)"
Real Email button has the addresses listed and the "Submit As" set to PDF:
Submit Button has the following code:
Button2.event__click.submit.target
= "mailto:[email protected],?cc=[email protected]; [email protected]?subject= " +
CTitle.rawValue;Button2.execEvent("click");
I would like the textfield title (CTitle) to automatically populate in the subject line - what is missing in my code?
Thanks

Is there a way to add the information from a custom field into the subject line of notification email

I have a field in my form that I would like to add to the Subject line in the email notification form. Is there a way to pull that out of the form and add it?

Try with t.code AUT10 -Audit trail using which you can see the change histories.
Regards,

Mail app does not spell check

I have Mail prefs set to 'Check spelling as I type' but it does not. It does not check spelling using contextual menu either. It used to do both these things but they seem to have wandered off. Can anyone help?

I'd say your Mail preferences file is corrupt, so if that's true, you need to re-create it like this:
Quit Mail.
Go to Home/Library/Mail and:
*If you have an IMAP account (that includes MobileMe or .Mac accounts)*
move the account folders for those IMAP accounts to your Desktop.
Then restart Mail, setup those account(s) again and wait for Mail to download your email again. Re-set your preferences for everything, then check to see if the problem continues.
If not, then problem solved and you can delete the mail account folders on your Desktop.

When I enter a subject in the help "search box" and enter, it does not go to the subject but goes back to the screen before I clicked on the help option at the top of the screen

I cannot get thehelp option to work. When I click on the help option at the top of the screen, I get the page with the Search option, but when I enter a subject to search, tescreen returns me to the point where I started before clicking on "help". Is the help file corrupted? How can I fix?

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I work a long list. Each line has a link that I click on to work. I then click submit. It does not return to the last line worked. Goes to the begining.

I go to the Insurance Auto Auction website to access a list of vehicles up for auction. When using "explorer" I can follow the link and set a bid value then click submit. It will return me to the last position on one the list. Firefox will sometimes doe this too but more often than not it brings me back to the top of the list. When I am looking at 300 units this becomes very frustrating.

Try opening each link in a new Tab, and when you're done with each Tab, close it. The "list" page will be sitting exactly where you left it, ''unless that page did an automatic refresh to add newer information while you were viewing a different tab.''
Middle-click a link
or use { Ctrl + click }
or right-click and use Open Link in New Tab

How to replace the subject line of the subimitted email with the filled in data?

Hi,
I am creating a very simple form using adobe acrobat X standard. The user will submit the form using submit button which emails me the form. All the users have adobe acrobat X standard installed on their computers. I have a text field in my report called 'Project Title' and the user will write the project name in front of that. I want this project name to appear in the subject line of teh email. How do I do that? What javascript to use?
I found this example which does exactly what I am looking for. But I don't know how to view the java code use. http://forums.adobe.com/thread/462681
Any help would be appreciated.
Thanks,
Sandeep

Read this tutorial: http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address

Editing the subject line of a received email in Outlook 2010.

I'm not sure if this is intended or not, but a coworker of mine pointed this out to me. Are you supposed to be able to edit the subject line in an email that you receive from someone, BEFORE replying to it? For instance if you double click on an email to
view it in a separate window you can select the text in the subject field, edit it. and save it as the original.
Example here http://tinypic.com/r/2bdykh/7
In this example the subject line originally read "This is a test.". I've deleted "est." leaving what you see.
You can then save it so that it looks like the person who sent the message sent it to you with a completely different subject. (I can see where this could be used maliciously within the workplace or otherwise).
Just something i was curious about. Any thoughts?

Arjan is actually right. You can always edit the SUBJECT of a message.
It is just not so obvious how you have to do it - although Arjan described it.
This is because you first have to ENABLE editing of a message (email).
1) open one mail you want to change by double-clicking it
2) press the button which looks like a hyphan with a triangle under it in the top row on the right which opens a pull-down menu to access 'Customize Quick Access Toolbar'
3) choose 'More commands
4) customize the toolbar in the middle by 'choose commandos from': go to 'All Commands'
5) choose 'Edit message'
6) press the 'Add button' so that it gets added to the Quick Access Toolbar of an opened email / message
7) confirm by pressing 'ok'
If you now press the new (green) Edit Message button in the email you opened you can go to the subject line and change it to you needs, afterwards press the save-button
-> the email gets saved with the new subject
Once you enabled editing of an email you can easily do it for every mail without to running again through the whole procedure.
Thanks Arjan for the hint - I was already searching since long for a solution of this 'problem'. I use it to rename titles of emails which had either no subject, a wrong or misleading title. This helps me to find them easier back.

Can I enter a subject line into automated emails from the web?

Hi everyone
I'm setting up a button on my website to enable visitors to subscribe to my mailing list.
The button opens up a new email, addressed to me, which the visitors will send back to me, thus giving me their email address.
Is there any way I can fill in the subject line for these emails so it says something like "Add me to your mailing list".
I suppose it's a bit like when you email photos from iPhoto and the subject line e.g. "10 great photos" is already filled in.
Would really appreciate any advice.
Thanks in advance

You need to break it down into several pieces:
1. An event that causes mail to be sent.
2. Creation of the content to include in the mail.
3. Creation and sending of the mail message.
JavaMail will help you with #3. The rest are up to you.
JavaMail comes with several examples that show you
how to create a mail message and send it, given the
email address of the recipient, the content, the mail
server address, etc.
There's also pointers to many documents and tutorials
that will help you learn JavaMail. See the JavaMail
web site. And don't forget to read the FAQ.
If you have more specific questions, feel free to
post them here.

T-Bird does not spell check the subject line of an email. (v24.4.0).

Similar Messages

Maybe you are looking for