My Kodak AiO 3250 won't print since installing OS X Yosemite.

My Kodak AiO 3250 won't print since installing OS X Yosemite. I get error message on printer, "An unexpected error occurred. Check for problem at the printer a ..." Dialogue box ran out of space, couldn't determine the whole message. I've contacted Kodak, no response so far. Any other suggestions?

Hi guys,
This is not Apple's fault. Kodak is the one responsible for updating drivers for their new printers and from what I have heard Kodak is pulling out of the printer business and are behind on updating their drivers. This video on how to install a new printer might help and explains how sometimes old drivers can still work if you don't use air print.
-crazy

Similar Messages

Kodak 5210 is no longer printing since my upgrade to Yosemite.

It will now only print colours but no wording for some reason. Test prints etc are all fine.

It will now only print colours but no wording for some reason.
Could you provide more information please? Is it printing at all?
If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Kodak printers - Yosemite

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

My hp photosmart D110 printer won't scan or print since I upgraded to Yosemite. Any suggestions?

Hey clutterfromduluth,
Thanks for the question. I understand that you are experiencing issues with your printer/scanner after updating to OS X Yosemite. To troubleshoot this issue check out the following:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.

Airprint v Kodak AIO series 7 wifi printer

Help, I just downloaded the updated OS for my IPad. My main hope was to print direct but it appears that only HP printers are supported ???? will there be an upgrade to include printers such as my Kodak AIO series 7 wifi printer - annoyingly my printer works fine with my DELL laptop (windows) and my brand new Macbook air ???

http://www.pcworld.com/businesscenter/article/211306/printervendors_keep_a_close_eye_onairprint.html
Maybe useful.

Since installing OS X Yosemite my Acrobat 8 fails to work

Since installing OS X Yosemite my Acrobat 8 Professional fails to work. I get a dialogue pop up saying:
Then closes the application preventing myself creating multiple page PDFs
Can anyone help resolve this issue?

Acrobat 8 is not compatible with Yosemite. You need to switch to Acrobat XI
(you can't upgrade because Acrobat 8 is also too old to qualify for an
upgrade).
On Fri, Jan 23, 2015 at 10:07 AM, olidillon <[email protected]>

The sound on my Mac Pro doesn't seem to be working since installing OS X Yosemite - help!

The sound on my Mac Pro doesn't seem to be working since installing OS X Yosemite - help!

I had a smilier issue... If you're using external speakers (as opposed to the ones on the display), you may need to re-select them in System Preferences. Some preference choices seem to reset with the Yosemite install.

Glitch since installing OS X Yosemite. When I download a docx MS Word doc and try to open it the word icon flashes up and does not open.

Glitch since installing OS X Yosemite. When I download a docx MS Word doc and try to open it the word icon flashes up and does not open.

Step one is to log into a newly created admin user account and see if the problem persists.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

8500A won't print since I replaced ink cartridges.

Hi. Ever since I replaced all the ink cartridges (with genuine HP parts) on my printer it won't print except very faintly in two of the colours, and not at all in the other two. I've cleaned the printheads, and tried to align the printheads. Aligning the printheads failed. Why would the printer suddently stop working after replacing the cartridges, and what else can I do to fix the problem? I found a page about replacing the printheads, but can't find any info any where about where to buy these parts or how much they cost. I tried to find a repair place near me but the search came up with no results. Any help you can provide would be appreciated.

Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet Pro 8500A, on Windows 7, after replacing your Ink Cartridges. I am happy to help! Please, try the steps within this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series. If the guide does not resolve your issue, Please contact HP, phone support for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Officejet 8600 won't print since Yosemite upgrade

I have a problem installing the HP driver since I updated Yosemite. I get these messages.
So I can't install properly.
I have delted the printer in the system preferences, repaired disk permissions, and reinstalled 3.0 driver. The messages above are what I receive during installation.
What I am experiencing regarding printing is my second print job won't print until I put the computer to sleep and then open it up again. The weird thing is is it will print my first job even after it has printed it once.
Here is the print list.
This is what I see... Opening printer connection shows at the top all the time. The job that is listed will print and then say 100% complete when it is finished printing. Then when I send another job this is what the list looks like:
The second job listed won't print until I put the computer to sleep and then it will print.

Hi,
From the Applications folder open the Hewlett-Packard folder and follow the Uninstall option to remove the software.
Next click the Go menu (you may have to click of Finder for the go menu to appear), then click on Computer and open the active volume of your OS, that will more likely be listed as Macintosh-HD.
Open the System folder, then open the Library folder
(If the library folder is hidden and not listed, click on Go > Go to folder, type Library and click on OK.
Open the Extentions folder and locate both of the MaxtorPowSecDriver.kext and the IOFireWireMxBt.kext files, copy those files to your desktop and then delete it from the Extensions folder (for backup porpuses be sure not to delete those till you are fully up and running with no issues).
Next repair the disk permissions as following:
1. Open the the Applications folder.
2. Go to the Utilities folder.
3. Double-click on Disk Utility.
4. Select the hard drive containing the boot volume.
5. Go to the First Aid tab and select Repair Disk Permissions.
Note: This process may take several minutes depending on the Mac and amount of permissions that need to be repaired. The Progress Log will indicate when the process has been completed.
Once you are done, download and install the following software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-125213-3&cc=us&dlc=en&lc=en...
Finally, reboot your Mac and ensure that everything is up and running.. once you have verified it delete the files copied to your desktop.
Please let me know of any difference,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Preview won't print many installed fonts

Since updating to OS 10.5, Preview won't print many fonts from my pdf documents. The odd thing is, Acrobat will! The fonts are all installed in my library, so I can't figure out why Preview won't recognize them when printing. Any ideas?

Some more info: I've tried deleting prefs, ran Disk Warrior, repaired permissions, added a new user... nothing helps. What is more, when I go to print, many of Preview's drop down menu items ("color", "print settings", etc) don't fully display their information. Help!

PROP RES DLL not responding blocks my printer since installing Adobe XI Help please

An error message-PROP RES DLL not loading- appears every time I try to use my printer, since downloading Adobe XI.I then cannot use my printer.
Please advise in simple language, how I can clear up this problem.

Try reinstalling or updating your printer driver.
If you need more help with this, tell us your operating system & version, as well as the exact printer model you are using.

Internet Explorer won't open since installing Creative softw

I was asked to look at a friend's PC because she is having trouble since installing the software that came with her Creative Zen MP3 player.
Whenever we tried to open Internet Explorer, Microsoft Frontpage opened with a message about installing softwatre (Frontpage extensions?) though I don't think she has Frontpage on her PC.
I managed to get it back to normal by the use of a System Restore but then the fault reappeared after reloading the Creative software and we had then lost that System Restore point (should have saved a new one!).
I did see something with a GOOGLE search which seemed to indicate that others had this problem but could not get the full details as the message had disappeared.
I would be grateful for any suggestions on how to get Internet Explorer back.
MBMessage Edited by JMB23 on 0-25-2006 :56 AM

Satellite C55-A5388
Internet Explorer is here.
C:\Program Files\Internet Explorer\iexplore.exe
What happens when you try to execute iexplore.exe from there?
If it doesn't appear to open, start Task Manager (Ctrl + Shift + Esc). On the Processes tab, sort them by name and see if iexplore.exe is listed.
If you've done Windows updates, you probably have v11.
-Jerry

Mac Mail application won't open since installing Leopard

Hi Folks,
This is my first post - I have usually been able to locate the help I need just by searching through the discussions, but haven't found anything on this issue (hope I didn't miss it). Since installing Leopard on my MacBook (2 GHz, Intel Core 2 Duo, 80 GB HD) I cannot open the email app. (Mac Mail). The error message I get is: "+you cannot use the application "mail" with this version of Mac OS X+". Any help would be much appreciated.
Thanks!

If you had the Mail Application stored in any other directory (folder) than the root Applications Folder, you will get this error message because Leopard installs a new Mail Application in the Applications folder.
Delete your old Mail Application from its current locations, and from the dock, and run the newly installed Mail Application in the Applications Folder and you should be fine.
This is also true for several other Applications that are installed new in Leopard. I don't know them all, but you will when you run them and get the same error message.
Good luck. Hope this fixes your problem.

Compressor 4.1.3 won't open since installing Yosemite 10.10.1

Compressor 4.1.3 crashes since installing Yosemite 10.10.1 on MB Pro Retina 15" (late 2011).

Thanks for your suggestion Tom.
Before performing a clean install of Yosemite OS X 10.1.1, I decided to delete Compressor, Download it again from the App Store and reinstall.
That totally did the trick. It is not crashing on open anymore and is working perfectly once again.

Drag and drop won't work since installing InDesign CC 2014

That's it really. Any ideas?
I'm on an iMac with 10.9.4. Since installing InDesign from Creative Cloud Drag and drop, and I think cut and paste doesn't work.

google those issues.

My Kodak AiO 3250 won't print since installing OS X Yosemite.

Similar Messages

Maybe you are looking for