My computer is new iMac 27" with Mountain Lion but doesn't recongnized in AppStore as installed, My computer is new iMac 27" with Mountain Lion but doesn't recongnized in AppStore as installed

I bought my iMac in winter. Early 2013. Mountain Lion was included.
One day, a copy program was running and seemed to get always running asking me not to stop...
I disconnected electricity.
Afterwards, the computer refused to start on.
I carried it to MicroLogic firm in Quebec City (west).
They made a repair and my computer is working as well from this time.
When I now open AppleStore, the sticker says MountainLion is not installed.
Why?

Log out of the App Store and then log back in with your Apple ID and password. See if that will let AS recognize the system you're running.
Or you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - check again.
OT

Similar Messages

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Installing OS on a new HDD for imac with no installed HDD

Hi all
I am looking to buy an iMac 27", but it doesnt come with a HDD
So I wanted to know if I buy a new HDD for it, can I install Mavericks onto it and fit it to the iMac? How would I go about doing this?
I dont have access to another mac but I do have access to a windows machine. Can I do it from there?
Any help appreciated
Thanks

Where are you buying an iMac 27-inch, Late 2009 model that has no internal hard disk drive?
Having to assume it was removed by an original owner, does the computer work? Was it tested by use of an externally enclosed HDD with a correct bootable system installed?
There are various repair and upgrade guides online, several topics among them and several are free to view or use. There likely is an iFixit guide that may cover that vintage of iMac 27-inch build year model.
Not sure which iMac 27-inch model guide applies to your computer,
some appear here http://www.ifixit.com/Device/iMac_Intel
While considering the hard disk drive, be sure that if there are any sensors or special cables required to be in place and attached to a new replacement, they are in place and working; some users of later models found when a hard disk drive was replaced, their fans ran at high and uncontrolled speeds due to lack of sensor input. The default situation was for the computer act as though the unit was overheated. And third party fan control software to set a fan at low slower speeds does not take into account faster speeds are needed to cool iMacs. Yours may not exhibit this issue, but I am not certain either way.
When you get it set up, with HDD and original Snow Leopard installed & updated to 10.6.8, be sure to check to see if there are any hardware or firmware updates. I see there was one listed for your model and it may already be installed...
•27-inch iMac EFI FW Update 1.0:
http://support.apple.com/kb/DL1031
Hopefully this helps...
Good luck & happy computing!

TS1389 I used to have another email address associated with Itunes and transfered my songs to my new Imac now some of the songs wont play because they were athorised on another computer and I cannot remember my old Itunes password associated with the old

I used to have another email address associated with Itunes and transfered my songs to my new Imac now some of the songs wont play because they were athorised on another computer and I cannot remember my old Itunes password associated with the old email.

Hello Johnny Reptile,
The following article details the necessary steps for resetting your old Apple ID's password.
Apple ID: Changing your password
http://support.apple.com/kb/HT5624
Cheers,
Allen

How do I install premire 10 to new imac with ML

I get the error message listed below when I try to install from the original DVD for adobe premire.
I purchased an iMac with version 10.8.5
I am trying to install from my original DVD's Adobe Premire 10 Elements installed alright but the premire will NOT install.
can someone please help me
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 16 error(s), 12 warning(s)
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Camera Profiles Installer_6.4_AdobeCameraRawProfile6.0All 6.4.0.0 will be uninstalled now.
----------- Payload: {6F3A624B-1B72-4081-96E8-23261F389C5C} AdobeTypeSupport CS5 10.0.0.0 -----------
ERROR: DF027: Unable to copy file from "/private/tmp/.tempdir4KALYJ5W/Assets2/universal/Unicode/Mappings/Win/CP932.TXT" to "/Library/Application Support/Adobe/TypeSupport/CS5/Unicode/Mappings/Win/CP932.TXT" Error 0(Seq 49)
ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 49)
ERROR: DF024: Unable to restore file at "/Library/Application Support/Adobe/TypeSupport/CS5/Unicode/Mappings/Win/CP932.TXT" from backup at "/private/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/Cleanup At Startup/.tempsqKv3N" Error 0(Seq 49)
ERROR: DW063: Error rolling back command ARKDeleteFileCommand(Seq 49)
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Elements Common Frameworks 10: Install failed
ERROR: DW050: - Elements Inspiration Browser: Install failed
ERROR: DW050: - Elements 10 Organizer: Failed due to Language Pack installation failure
ERROR: DW050: - Smartsound3: Install failed
ERROR: DW050: - Photoshop Camera Raw for Elements 10: Install failed
ERROR: DW050: - Smartsound1: Install failed
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - Adobe Premiere Elements 10: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Elements 10_LangPacken_US: Install failed
ERROR: DW050: - Elements 10 Organizer_AdobeElements10Organizer_en_US: Install failed
ERROR: DW050: - Smartsound2: Install failed

You may need to contact Adobe for install issues
Select a reason, then click I STILL NEED HELP to activate Premiere Elements chat
-http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

Installing PSE 9 on new iMac with no CD Drive.

I bought a new iMac and cannot figure out how to install a new copy of Elements 9. I have a disc that I previously used to install on my Macbook, but now I do not have a Cd drive on my new computer. Tried to transfer the software using an external hard drive but it did not work. Any help?

First of all this:
Tried to transfer the software using an external hard drive but it did not work
Did you try to migrate an installed version of PSE? If so, you have your work cut out for you before you can install it.
As for the disc, if you have access to another computer, even a windows computer, you can copy the files from the disc to something like a thumb drive and use that. If you're near an Apple Store they will sometimes let you make the copy there.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I hv lost my icon for iphoto on my Imac Mac OSX10.5.8.   I still hv my pics but can no longer creat albums and events. If I upgrade to the latest Mountain Lion, will my pics go into the new iphoto?       I would like to update Mountain lion.Will

I hv lost my icon for iphoto on my Imac Mac OSX10.5.8.   I still hv my pics but can no longer creat albums and events. If I upgrade to the latest Mountain Lion, will my pics go into the new iphoto?

From where did you lose the iPhoto icon? From the Dock? If so, then it's still in your Applications folder. Find it there then drag the icon back into the Dock. If it's no longer in Applications perhaps you've moved or renamed it. Use Spotlight to search for "iphoto."
Upgrading to Mountain Lion will not affect your iPhoto Library unless you erase the hard drive first. Be sure you backup before any system upgrade.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Trying to install SL on a new hard-drive for my iMac, when asked which disk to install on it gave me no options, i followed advice from another forum and created a partition, now can't boot from the new drive at all. Help?

I've had **** with my iMac, the hard-drive failed so i replaced it with a new 1TB Samsung drive. Then when i tried to install SL from the install disk, all went to plan until it asked me which drive i wanted to install it on, where it came up with a box where my options should have been, but instead it didn't give me any options to install it on any drive i.e. it asked which drive i wanted to install it on but no drives came up to select.
So i followed the advice from another forum, look at the 'Extended Hard-drive preparation' response
( https://discussions.apple.com/message/10576009#10576009 )
After following these instructions i have now got a new partition, but when i restarted my computer to install SL on the drive, the option to boot from the drive is now not available, now i must boot from the install disk, whereas before i was able to boot from either the install disk or the hard drive. The hard drive is still visible in disk utility as it always has been, but i am now unable to boot from it, let alone install SL.
Please help my iMac has been broken for months and i've been trying to fix it for so long and am getting problem after problem. Thank you!
<div class="mcePaste" id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;" mcestyle="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;"></div>

Hi db2
That off the shelf MS-DOS / FAT-32 drive needs to re-partitioned GUID Partition Table / Mac OS Extended (Journaled) before you can install OS X and Startup your Intel iMac from it.
1. Boot from your original install or retail SL DVD and open Disk Utility.
2. Highlight the new HD in the list of drives and select the Partition tab.
3. Under Volume Scheme select 1 Partition and click on the Options... button.
4. Select GUID Partition Table in the drop down window and click OK.
5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
6. Once thats done, then you can do a clean SL Install, Restore from TM , your old HD or Bootable Clone.
Dennis

I just installed iLife on my new Imac version 10.8.2 and now I can't open my iPhoto app. It says that I Photo is damaged or incomplete. What do I do to restore my iPhoto and pictures!

I just installed iLife on my new iMac 10.8.2 version and now I can't open my iPhoto app. It says it is damaged or incomplete. What can I do to get it back along with all of my picutures? I was told by an Apple employee at my one to one training that it was OK to install iLife to get the iDVD that I wanted. Help!

I have installed iLife a few times and because of photostream, the version on the disc must be updated. Software update usually takes care of it. It sounds like you installed an old version over a new version. I've not tried that.
You have a late 2012 machine, if you open the Mac app store from the dock, you should be able to go to the purchased tab and download/install the right version of iphoto. Honestly, you should not have used that disc on this new of mac or at least only installed iDVD & iWeb but not garageband, iphoto, and iMovie.
If the Mac App Store shows iphoto as installed already, drag the app from your applications folder to the trash and reinstall it again from the Mac App Store. That is the version you need. You may find garageband and imovie have similar problems.
good luck.
PS. your photos are in your photo folder in your home folder. don't touch those, I'm talking about the app "iphoto" in the applications folder.

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Best way to install Windows 8 on an iMac with 1tb Fusion drive

I just ordered my first iMac. Not my first mac, I have owned numerous Mac laptops in the past but am finally ready to make the switch for my main desktop .
Now I need to installed windows 8.1 because I need to run visual studio. That is literally the only app I need to run.
Ordered with the below specs:
27" imac
i7 processor
1tb fusion drive
16gb ram.
I am thinking of two options:
1) use parallels or vmware fusion and create a 200gb windows virtual machine and give this machine 6gb ram (4gb is recommend by more couldn't hurt). since the fusion drive works at a block level, my windows OS and vs should parts of the VM file should get moved to the SSD as I will be using it a lot. my main goal is max performance. i will be working on metro apps (not windows phone apps). any recommendation on which is better? parallels or vmware? stability and performance is key. i don't need any fancy UI integration and i won't run any games. happy to run windows in fullscreen mode.
2) create a 200gb partition and run bootcamp. cleary more stable but will it be faster than above because i am assuming the ssd caching will not working here?
per mircorosft website they give instructions for both options above, but i am looking for realworld experience in what will get be most stability in terms of network IO (working on UPNP apps so need stable network bridging) and then performance is key.
HDD size is not a big deal for me as most of my media lives in my synology NAS.

virtual machine will be more stable
bootcamp will be faster but the only place you will notice is if you play new 3d games on diwndows

How can I install iWork '09 on new MacBook with Lion?

I have an install DVD for iWork '09 (9.0.3), and I've been running iWork on my iMac for several years without a problem, even after upgrading to Lion. Now I have a new MacBook Air with Lion preloaded and am trying to install iWork on the new machine. I was able to install from the DVD using drive sharing, but when I try to open Pages, Numbers or Keynote, I get a message that says "Pages cannot be opened because of a problem" -- presumably because I need to update iWork for Lion. After downloading the iWork 9.1 update, I tried to open it but get an error message that says "A newer version of Keynote has already been installed."
This doesn't make sense to me, since the version I installed from the DVD is definitely older. How can I update iWork to run on my new machine?
By the way, I tried just copying the programs from my iMac with AirDrop, and I get the first error message I mentioned above.

MN,
I don't know why the Drive Sharing idea didn't work. I can think of reasons that copying with AirDrop wouldn't work.
At some point you may just want to give up and purchase Pages using the Mac App Store. It's ridiculously cheap and easy.
I worry that you have so much inoperable iWork stuff on this computer that it needs a good clean-up, whichever way you decide to go.
Yvan Koenig has a script to do the purging of old copies of iWork files that you can run before you make any more attempts at installing iWork or any of its components. It the last item on this page as of this writing...
Script Link
Jerry

HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

How to instal iMovie6 in my new iMAC

What is the best way to install iMovie6 to my new iMac that is on it's way...I read so much about how no one likes the new iMovie8. So should I use firewire and transfer it or should I use the disc? The reason I ask is because I have so many plugins in iMovie6 and it would be faster to use firewire. But then someone said it might knock out iMovie8. So another question would be should I rename iMovie6 before I transfer it to the new machine? Someone told me that adding iMovie6 to the new iMac may knock out iMove8.If I use the disc should I re-name iMovie8 first? Or would it be better to use the iLife6 disc to the new machine.
Thanks
Sue

Ellyn, while both of the previous solutions offered would get you iMovie 06 on your computer, they wouldn't get you all of your plug ins, and other documents currently on your existing mac.
When your new computer arrives, and before you start it up the first time, position it next to you existing mac. Connect the two with a firewire cable. Restart your old mac while holding down the T key. This will eventually produce a firewire logo on the screen of your old mac. When you see the logo you can let go of the T key. You haven't hurt your old mac or lost any info. You're starting it in TARGET mode to allow the new computer to transfer all of your old files when you boot it for the first time.
Now you can turn on your new iMac. It will go through a start up process and will ask you if you want to copy your old files from an existing mac. Click yes (or ok) and there ya go. It will take about 15 minutes to copy your files over, maybe longer if you have a lot.
But all of your existing software installs, documents, passwords, layout, and desktop preferences will be copied over. You can then set it up differently if you like.
This way, all of your plug ins, and you're existing iMovie preferences will transfer and be ready to go with your new computer.

I downloaded carbon copy. transferred entire internal hd to new replacement HD thru USB. computer booted from replacement hrdrive. then installed replacement hard rive into iMac. when rebooting imac did not recognized new replacement hd.

i downloaded carbon copy. transferred entire internal hd to new replacement HD thru USB adapter kit. computer booted from replacement hrdrive. then i erased the internal hardrive and reloaded the operating system.( i needed to find out if the hard drive was bad or virus/worm was the cause). then installed replacement hard drive into iMac. when rebooting, imac did not recognized new replacement hd. i also upgraded memory at the same time. ok what did i do wrong. do i have to remove the new replacement hardrive to extract the data.

It should not matter. CCC will "clone" the recovery partition as well, but not knowing exactly what operation you had CCC perform it is difficult to know what may have gone wrong - it has many customizable options and you have to choose the correct one.
I have performed the same transplant as you described and didn't have a problem, but if your Mac is not recognizing the internal HD you really have no choice other than to reinitialize it as suggested. After that, install OS X, upgrade to Mountain Lion if required, and migrate your old account(s) from your backup.
my backups have backups.
I assume you didn't mean that literally. Have redundant backups - don't "back up your backups".

My computer is new iMac 27" with Mountain Lion but doesn't recongnized in AppStore as installed, My computer is new iMac 27" with Mountain Lion but doesn't recongnized in AppStore as installed

Similar Messages

Maybe you are looking for