My computer wont start and beeps 3 times

I was just playing Batman: Arkham Origins and my macbookpro just turned off with a beep. When i try to turn it on it just beeps 3 times 5sec pause and repeats the 3 beeps again. Its a brand new macbook pro 2013 13" 4gb ram and I havents modified any of the hardware, how can i fix it?

means your RAM has gone bad
If its a new macbook contact Apple about a replacement of your mac or a change of the logic board (if after 14 days of purchase)

Similar Messages

Computer wont start. three beeps in a row

computer wont start. gives a sound, three beeps in a row. stops, starts again

Usually means bad memory.
Power On Self-Test Beep Definition - Part 2
Intel-based Mac Power On Self Test RAM error beeps
Using Apple Hardware Test
Intel-based Macs- Using Apple Hardware Test

MacBook wont start and beep "S-O-S" when I push the power button

My wife's MacBook suddenly quit. Was working fine one day and dead the next. Screen is black. No keys work. Light on charger is green, so battery seems to be charged. White light on front is steady and not pulsing as it normally does. When I press the power button the computer beeps S-O-S in Morse code. What's wrong? Can I fix it myself? Can the Genius Bar fix it or is it dead for good? I'm sorry, I don't know what OS it's running (because it won't turn on ...) Thanks!!

Your MacBook definitely needs service. Contact Apple using expresslane.apple.com if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

My computer wont start!

My computer wont start and i dont know why!

If a SMC reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a free diagnosis.
http://support.apple.com/kb/ht3964
I assume you have a functioning power adapter attached to your MBP.
Ciao.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

My ipod wont start and itunes wont recodnize it, what happened and how do i fix it?

I recently went to: settings, general, reset, and erase all data and settings, now my ipod wont start and itunes wont recodnize it, what happened and how do i fix it?

- After being connected to a charging source for half an hour, reset the iPod and then connect to your computer and it if appears in iTunes restore the iPod via iTunes.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

HT1349 i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

i upgraded to yosemite last week, now my computer wont start. it stops at white screen with apple logo. what do i do?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

MSI Z87-G45 Gaming- computer wont start after bios update

Hello!
I just updated my bios to 1.6 --> computer wont start now but the fans are spinning, and the power led are black...
I took out the cmos battery for 30 min and shortened the JBAT1..
Can someone help me?

Well, as the G45 does not offer a backup bios your board seems to be bricked. You can try the recovery tips here: https://forum-en.msi.com/index.php?topic=174985.0
If no help rma it.

Computer wont start up

So today I went to start working on my LR and FCPX projects and when I got to the office for no reason at all my computer wont start up.
I've tried holding the "shift", "command" & "V" key from what I read to do, and now I get a black screen which pretty much said what the grey screen said.
This is the strangest thing.

According to your profile your Mac has v10.8 installed.
Startup your Mac while holding down the Command + R keys so you can access the built in utilities in OS X Recovery
From there you can repair the startup disk if necessary or restore OS X.
Hopefully you had all your important files backed up in advance just in case.

Computer wont start in any mode

my windows xp computer was just working this past week till i restarted it and it said that i needed to download a antivirus and i have one it just wont open up in safe mode or the regular mode so now the computer wont start at all and now i was wondering if i could get a new computer tower and plug in my netgear wireless G router into this new computer tower and have internet and everything

plugging in a new tower should work. its like a whole new computer with the same screen and stuff as before. mine just got a bad virus and it wont start either. might have to do the same thing.

E540 After BIOS update the computer wont start

Hi!
After I did an BIOS update from windows the computer wont start. Only the green FN key and the red "i" in the word ThinkPad lights up!
I can't access BIOS.
Tried tho remove the small CMOS battery for an minute

If these long boot symptoms, following the BIOS update occur, multiple customers have reported success in resolving them by disabling Intel AMT and setting the security chip, TPM, as active in the BIOS.
Steps to disable Intel AMT and enable TPM settings as below.
Boot into BIOS
Select Config
Select Intel AMT
Press Enter key on Intel AMT Control and select Disable
Press ESC twice
Select Security
Select Security chip and select Enable
Press F10 and click Yes.

Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.

hi, please help.
Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
Please please help!!!

Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.

Report execution start and end date/time

Hi All,
How can one find execution start and end date/times for all reports? Basically I am looking to see what reports were run on a day, when and how long it took for each to complete.
Thank you.
Denis

Hi,
The "eul5_batch_reports" holds the data about the scheduled report and if you don't have any so you will not have any data.
Take a look at "EUL5_QPP_STATS"
for example:
select
qpp.qs_doc_name,
qpp.qs_doc_details,
fu.user_name Ran_by,
qpp.qs_created_date Start_run,
qpp.qs_doc_owner Doc_owner,
qpp.qs_num_rows rows_fetch,
qpp.qs_est_elap_time estimated_time,
qpp.qs_act_elap_time Run_time,
qpp.qs_act_cpu_time Cpu_time
from eul_us.EUL5_QPP_STATS qpp,
fnd_user fu
where substr(qpp.qs_created_by,2,10)=fu.user_id
order by qs_created_date

How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

How can you prevent the mac book pro from unexpectedly shutting off and beeping three times repeatedly?

The three beeps are an indication of a hardware problem. Power On Self-Test Beep Definition - Part 2 - Apple Support

MacBook Pro won't start. Beeps 3 times.

My MacBook pro won't turn on and beeps 3 times...pause..then another 3 beeps. The light in the front blinks with the beeps. I've opened it up and taken the RAM out and put them back in, but nothing. I have an appointment at an Apple store tomorrow, but I'm just curious as to what's wrong. I'm hoping it won't cost me a ton of money. Any ideas??!

Read here > Power On Self-Test Beep Definition - Part 2
3 beeps = no good banks

My computer wont start and beeps 3 times

Similar Messages

Maybe you are looking for