My cousin tried to restore his Iphone without a back up and now when he turn on the phone its stuck in the apple logo like it its all deleted need help on what to do !!
tried everything used itunes but it doesnt appear in the device list so i cannot do much what else can i try?
just relax and try this http://support.apple.com/kb/HT1808
Similar Messages
-
i really need help I AM VERY FRUSTRATED
If you have a SIM password on the device, you need to contact the carrier about that. However, if you are referring to unlocking the phone to enable you to use it with a different carrier's SIM, then you need to contact the carrier the device is locked to, see if they provide unlocking, and then see if you qualify for an unlock. Only the carrier the device is locked to can unlock the phone.
-
i restored my iphone 3gs to factory settings and now when i turn it on it says to connect it to itunes well i tried that and its not working then i tried to hold the power button for three seconds then the home button for ten seconds but still nothing please help asap
If iTunes doesn't recognize it, do this:
http://www.apple.com/support/ipad/assistant/itunes/ -
I am trying to restore my iphone 3 I backed up to icloud and it tells me on the computer it is restored but the phone is still just hanging ou with a picture of a cord connecting to an itune symbol? help
Hello Bethandfive,
You may need to restore the iPhone while it is in what's called 'recovery mode.'
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Notes:
In certain situations, an iPhone, iPad, or iPod touch will automatically go into recovery mode after an update or restore issue. If your device is already in recovery mode, you can attempt to restore using iTunes.
Cheers,
Allen -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error. -
OS 8.0 update OTA to my 4S has killed the device. After the initial attempt failed I tried via iTune Restore and got Error 29.
Attempts to restore to an older version (7.1.2) failed as well. Same error.
The phone is stuck in the familiar "connect to iTunes" screen.
Has iOS8 destroyed my phone?Hi vijay294,
Welcome to the Apple Support Communities!
I understand that you received a restore error while attempting to update to iOS 8 and now you see the Connect to iTunes graphic on your display. In this situation, I would recommend using recovery mode to restore your iPhone. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
my iphone 4 had went black and now it wont turn back on i was jsut texting on it a few mins. ago then when i went to check my texts it was black i tried holding the power button down but that didnt work can someone please help
Hi alicia243,
Thanks for visiting Apple Support Communities.
If your iPhone wont power on, I recommend going through these steps first:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy -
I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name. How can I restore the names to my recent calls list?
Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.
-
i left my ipod 5g touch without charging for days and now when i put it in the charger it doesnt charge does it need a new battery or dead ?? where can i buy a new battery in egypt?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and maybe:
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?
I restored my iphone 4 using i tune and now it is asking for activation. How to activate it..?
Setting up and activating iPhone
To set up and activate iPhone, turn on iPhone and follow the Setup Assistant. The Setup Assistant
steps you through the setup process, including connecting to a Wi-Fi network, signing in with or
creating a free Apple ID, setting up iCloud, turning on recommended features such as Location
Services and Find My iPhone, and activating iPhone with your carrier. You can also restore from
an iCloud or iTunes backup during setup.
Activation can be done over a Wi-Fi network or, with iPhone 4S or later, over your carrier’s cellular
network (not available in all areas). If neither option is available, you need to connect iPhone to
your computer running iTunes for activation. You might also read http://support.apple.com/kb/TS3424 -
i restored my iphone via setting-general-reset, and now it has been on the loading screen for 24 hours?
You need to connect to the compuer via the lighting cable that came with it. IF that failes follow this article http://support.apple.com/kb/HT1808
-
After I did a backup from iTunes I noticed 3 of my contacts were gone and then tried to restore from a old backup, worked once and now it won't again. Why is iTunes restore not working correctly?
I thought all my contacts were saved in iTunes, never had this problem before. Besides manually restoring them myself, is there any other way to retrive them?iCloud
https://www.icloud.com/ -
i have restored my iphone 5 (6.1.4) and now im activating it says disconnect and reconnect how can i fix the need help fast
What you me
-
I tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
i tried to update my iphone 4 to i6.1 and now the phone wont turn on or charge
Um, connect to iTunes?
Maybe you are looking for
-
How to create a group of devices in MARS
Hi folks. I have quite a list of devices which MARS pulls syslog from and the client's security policy requires to run periodic queries against those devices (they are 871 routers). Is there any way to create a group of devices and add it to the "Rep
-
out of 25 dvds 3 work properly. My problems now are: the movie plays fine and then in sum spots my audio sounds garbled, I've tried different DVDs with same results, some work some don't. I have set the properties to encode "professional" with same r
-
Itunes cannot connect to istore
itunes cannot connect to istore
-
Hi, In my application, there is a table and an input form. I have bound the table and input fields in the form to the same context node. Now when I am validating the form, the input fields values are getting showed in the table. I have to show th
-
@ Start-up: Stuck after chime! No Apple Logo, No Spininng Wheel! But...
OK I tried to enable front row on my old powermac. Long story short it didn't work and made my clock and search icons disappear from my menu bar. I found some info about how to restore both by by downloading an reinstalling the latest combo os update