My CP1518NI prints with out of alignment. Calibrating and updating firmware did nothing. Fix?

My CP1518ni prints out of alignment.  I tried re-calibrating several times with no change.  I updated the firmware, also without any improvement.  I override the message that my toner cartridges are out so that I can use all of the toner.  Some say that that causes alignment problems.  How can I solve this problem.  My operating system is Windows 7 (64 bit).  I would appreciate any help.  Thank you.

I am having the same problem. It just started happening after nearly two years. I ran a diagnostics page and it is the magenta that is off. The magenta bar on the bottom of the page is at an angle. It  is aligned on the right but on the left side it is about 1/16th of an inch low. I also updated the firmware and ran the calibration twice. I have 1/3 of toner left in the magenta, black and cyan. The yellow is getting down to about 15% left. I would love a solution. 

Similar Messages

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

  • Need to print with out comma

    Hi all,
    My table is loaded like this 123,678 .00 .I need to extract the data without comma like this 1234678.00
    can any one help me to resolve this issue?
    Thanks in advance.

    You can do this.
    data: str(15) type c value '123,678.00'.
    translate str using ', '.
    condense str no-gaps.
    ABAP related questions should be posted in the ABAP forum. 
    As I see you have done.
    need to print with out comma
    Regards,
    Rich Heilman
    Message was edited by: Rich Heilman

  • How to print with out preview?

    Hello,
             How to print with out preview the report, I want to send the report direct to a printer with out a preview it.

    I believe with Crystal Enterprise (or BOE), when you schedule a report you can use the Print Settings to tell CE to print the report immediately (although I have never done this).
    HTH,
    Carl

  • My iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

    my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

    Hey jestinsinclairr,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694#10
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Have a nice day,
    Mario

  • Can I purchase and turn on iTunes match from my iPhone 5 with out a computer? And if so how?

    Can I purchase and turn on iTunes Match from my iPhone 5 with out a computer? And if so how?

    You can't do it from your phone. If they are iTunes purchased songs then you should be able to copy them to your laptop via File > Devices > Transfer Purchases. For music from other sources, anf i you haven't got them on your backup of your library, then you will need a third-party program on your computer to copy them back - there are some listed half-way down this page which might work : https://discussions.apple.com/docs/DOC-3991
    You might also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS

    Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?

    Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
    Backup your data if you haven't already:
    https://discussions.apple.com/docs/DOC-1992
    If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
    If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
    http://support.apple.com/kb/DL1726
    Make sure your hard drive is not over 85% full.
    Make sure Spotlight is not indexing.
    Make sure Time Machine is not running when you do other tasks.
    Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
    https://discussions.apple.com/docs/DOC-3036
    Remove any other system cache cleaning applications.
    Reset the SMC:
    http://support.apple.com/kb/ht3964
    Reset the PRAM:
    http://support.apple.com/kb/ht1379
    Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
    http://www.macmaps.com/frayguide.html
    If there are still issues, you may need to replace the battery:
    https://www.apple.com/batteries/replacements.html

  • HT1349 i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

    i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

    i had 4 point something i dont know lol but i used to text anyways with my wifi on "textfree app" until i updated like a dummy i didnt know they would ask for the sim card and my day got ruined . all  i wanted to know is if i put a sim card like if i buy a at&t card for 4$ on amazon if it would unlock it and i can use it again for i can play angry birds -_-  but u kinda made my day better thanks

  • Can we do poduct costing with out using cost sheet  and overhead rates

    Hi,
    can we do product costing with out using cost sheets and overhead rates.
    In that cast , how the cost estimation happens ?

    Hi,
    a costing sheet is used to calculate (on a base) overhead values. If you dont need / want to use this functionality just create/use a costing variant where not costing sheet is assigned.
    Use this costing variant in CK11N or KKPAN, depending if ou have a quantity structure or not.
    best regards, Christian

  • HT1218 3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection.  Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently.  Want to try and update firmware of Timecapsule, but it will not display an "Update" ico

    3TB Timecapsule version 7.6.4 is CONSTANTLY losing WAN connection.  Comcast is our carrier, and I've ruled out the modem as it downloads at 30mbs consistently. 
    Want to try and update firmware of Timecapsule, but it will not display an "Update" icon.
    Grrrrr.....makes me miss my stupid PC set up as I could force it to do what I want!
    Intermittent connection screws up Netflix, VOIP phone, Amazon, Streaming music via Spotify/Pandora, general internet access.....whole family is ****** off.
    Any tips/tricks/ideas???
    dave

    Downgrade firmware to 7.6.1 .. as the latest is just lousy.
    It is easy to downgrade.. hold down the option key whilst you click the version number. in Macs.. lots of stuff is hidden behind an option key.
    I also strongly recommend a factory reset and use all SMB names.. not apple type names..
    ie TC name.. TCgen4
    Wireless name TCwifi (or give names to both bands.. TC24ghz and TC5ghz).
    That helps all the non-apple part of the world.. connect.
    Also Mavericks has now changed over to SMB as well. So even Mac is now windows networking.
    Generally these two things. .7.6.1 firmware and SMB names will fix it.. if not post again as is another step that is possible.. controlling the WAN speed of the TC.

  • Excel printing looks out of alignment

    All in One C410A. Print works fine in all programs except MS Excel. My printouts look like the printheads are out of alighnment; both vertical and horizontal depending on the file. This did not happen until I moved to the C410. My old C309 the print was perfect.

    I am having the exact same issue with my 410; it looks as though the printer heads are out of alignment.
    Has anyone seen a sollution? It occurs in the middle of the page but only in Excel.

  • Printing with Epson 2880 after Apple Software Update of Epson Drivers

    I'm wondering if anyone else has noticed the loss of "Print Settings and Color Management" controls in the print dialogue when printing from Lightroom or Photoshop after the recent Driver Update (which appeared in Software Update.) Prior to the Update which I had been avoiding until it came down when I updated iTunes (again, Software Update) all print options were available with the Epson software. Oddly, if you elect allowing the printer to control the output the color and color settings are available but if you set the (Lightroom or Photoshop) dialogue to the paper profile then the color and color settings are grayed out. I talked at length with both Epson Tech support and went through the drill of removing and installing the printer and installing the newest drivers (from Epson) and nothing changed. I talked with Apple and again, nothing changed inspite of various adjustments. This is just a little disturbing since I do a considerable amount of photo printing.
    Any thoughts or opinions would be appreciated.

    I'm going to make an additional comment to my question and that is, strange as the behavior is, this may be a normal function with the update. Although during my roughly hour talk with Epson tech support, the rep was not aware and gave me reason to believe what was (not) happening in the software was in fact wrong. Clearly, the new print dialogue with it's grayed out settings is different from the previous print dialogue and print settings. If you now use a paper profile - regardless of manufacturer - the software assumes you are going to turn off color management - which is absolutely correct. Although I have not tried it, I am led to believe from some material I found deep in Epson's Support, the "color" area in the print dialogue no longer permits electing printing in "advanced" Black and White. More correctly, inorder not to have B&W grayed out you must be using glossy paper and the correct black ink cartridge is in the printer. This isn't a bad idea but sometimes I find the image is better with a Matte paper. Obviously you can, and I have, printed in B&W - you just have to be aware that within the Color settings of the print dialogue you no longer have the "option" to select B&W or advanced B&W. In some strange ways the new dialogue and settings areas of the Apple print menu for the Epson printers is simpler but it does come as a surprise when you first struggle with the changes.
    Message was edited by: PeterinKY

  • I have created a document in in design but when i print it out the borders are wrong. How do I fix this?

    I have created a document in in design and have put a border around a photo and text box, but when i print it out the border is not even. How do I fix this?
    Barry

    Hello John, Thanks for replying. I have attached the document as a PDF (is this OK). I have been tasked with designing this certificate for my local RSL sub-Branch for our up coming Centenary Of ANZAC commemorations. As most of what I do has been self taught I’m sure there is a simple answer to my problem. I have adobe CS6. This is how I set the document up. I first used the rectangle frame tool then pulled in a photo from Bridge and faded it.I then did the same with the logo. For the text I used the text frame then used the frame tool twice to form the border and adjusted the thickness. Then I set all of the margins and the document to A4  . When the document is printed it shows even borders of 12mm on the top bottom and right side but the left side is 34mm. I hope this makes some sense to you John.
    Kind regards Barry

  • Problems printing with  HP laser jet 5M and Snow Leopard

    Hello,
    Since In installed Snow Leopard on my mac I can no longer print with my HP laser jet 5M.
    I know this is because Appletalk is no longer supported, and that I should use the laser jet as IP printer. However, I couldn't figure out how to assign an IP address to the printer. It seems I can't do this by the config menus of the printer. I read somwhere it is possible to do this by terminal (telnet) but I am not familiar with unix.
    Can anybody help me to solve this problem?
    many thanks
    Marcello

    This should get you started
    http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

  • Use of "with master data & with out master data" at DTP update level

    Hello experts,
    In DTP, I check "with out master data". When I try to send corresponding transactional data, It is showing SID related error. Can anybody suggest what is the use of "with master data & with out master data" at DTP level.
    Thanks in advance,
    Zakir.

    HI
    HI in DTP level If you set this indicator, the system terminates the update of the request if no values are available for a data record.
    Load the relevant master data before you load the transaction data.
    If you set this indicator, the system terminates activation if master data is missing and produces an error message.
    If you do not set this indicator, the system generates any missing SID values during activation.
    In DataStore maintenance, if you do not set the SIDs Generation upon Activation indicator, the No Update without Master Data indicator in the DTP has no effect.
    thx
    vijju

Maybe you are looking for

  • Sync session failed to start

    Had tried force closing all apps and restarting my phone but still can't sync my iPhone4S with my computer Can anyone help?

  • Can't install Win7 on 2011 MBP

    Hi All, I have a new 2011 MBP 15 i7 with the Apple SSD and I'm trying to installing Windows 7 (64 bit Ultimate) via Boot Camp. I also tried the 32 bit version, with the same results... I used Boot Camp Assistant to make a 60GB partition, and got pret

  • Custom Cluster and role of INDX in that???

    Hi All Gurus, I need to create a custom cluster and then import and export the data to DB. I saw some threads where i saw INDX being used. Can anybody tellme what is this INDX table and how does it play a in creation of custom cluster also how do i c

  • ALE Change sales order when Delivey order already created and posted

    Dear All, We  know that ALE with message type of ORDERCHG can change the sales orde automatically when the purchase order have changes. And I can still change affect the sales order by change the purchase order even the following delivery has been cr

  • Adobe Photoshop Elements 9 Organizer Katalog außerhalb des Organizers auf Festplatte sichern

    Hallo zusammen, weiß jemand wie, ob man den Katalog des Organizers außerhalb des Organizers auf eine Festplatte sichern kann? Danke für Antworten Grüße Julian