My data usage resets when I don't want it to

I have a monthly data allowance from my provider. Every renewal, I reset my data usage on my iPhone to keep track of usage. It's accurate. However, sometimes when I check, it seems to have reset itself meaning I have to check with my provider as to what usage has accumulated in the current period, and the data they provide is not accurate to the moment as iPhone usage would indicate.
Why does the iPhone reset itself?

I'm having the same problem started recently a couple days ago (around April 1st). I've discovered I can click even if I turn off "Tap to Click" just by barely putting pressure on the trackpad. I'm fairly certain this is a hardware issue but it may be a software issue not sure.

Similar Messages

By what time zone does Verizon use to log data usage? When I checked my current usage, there is data used logged in at early morning times and I don't have anyone else who is up at these times.

By what time zone does Verizon use to log data usage? When I checked my current usage, there is data used logged in at early morning times and I don't have anyone else who is up at these times. I also have 1.8+ GB charged to my allowance that I don't understand at all how it is mine because the highest I've ever logged at any given time has been barely 0.5 GB. I'm cruising along at .04-.07 GB and all of a sudden appears a 1.8+ GB deduction/usage and it makes me wonder what the ???? is going on. Is Verizon posting fraudulent usage amounts just to drive up my usage so I have to buy more Gigs?

The time is not the time of actual use, but the time a tower reports the use. The data would have been used anytime prior to that time. Usually, but no always, the usage happened between the time prior and the time reported.
For example:
9:00 AM   1.23 MB
7:05 AM   0.01 MB
1:15 AM 350.03 MB
8:00 PM   23.89 MB
This does not indicate 350 MB was used at 1:15 AM. It really tell you 350 MB was used sometime between 8:00 PM and 1:15 AM.
The times are local time zone as far as I can tell.

Date/time resets when battery runs out on E51

Any ideeas how to solve the problem?

There is a little auxilliary in the phone. This is the battery that keeps the clock going when the main battery is removed or flat.
Usually the date/time resets when there is a fault with this auxilliary battery. You can get it replaced at your nearest Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Why Does Save As-PDF/A reduce file size when I don't want it to?

I scanned a 4-paged printed card with my Epson Perfection 4490 scanner in order to digitally archive it. Each page is about 5x7 inches, and I scanned at 100 percent. I scanned each page as an individual TIFF image file, at 600 samples per inch.
I brought each TIFF image file into Photoshop one at a time. I saved each TIFF as a JPEG, at Quality: 8, Baseline ("Standard").
Then, I brought the JPEG's into Adobe Acrobat Pro to create a 4-paged PDF. Initially, the file size of the saved 4-paged PDF was 5 MB. (Later, I determined the individual JPEG's add up to 5.2 MB.) When saving as PDF/A, the final format that I want to use, the file size was unexpectedly reduced from 5 MB to 2.5 MB.
What is the reason for the file size being reduced to 2.5 MB? I had already done the compression that I wanted in Photoshop. The PDF was not downsampled. I purposely did not use Optimizer.
I did a test. This time, in Photoshop, I compressed each TIFF to JPEG, at Quality: 5, Baseline ("Standard"), the Medium setting instead of the High setting. After bringing these JPEG's into Adobe Acrobat Pro, the saved 4-paged PDF was 2.8 MB in size, an expected smaller size. Saving as PDF/A produced a file of 2.6 MB in size, very close to the same size this time, possibly indicating it accepting the Medium quality level.
Apparently, saving as PDF/A reduces the quality level of JPEG's to Medium quality, when they are of higher quality to begin with. It seems to be designed to optimize even when I don't want it to.

Here's the Audit Space Usage for the original 5 MB file. It shows the images taking up the majority of the space, as expected:

When I use the keyboard on my iphone 5, the keyboard takes a mind of its own. If I press a letter sometimeIs it puts the letter twice. It puts periods when I don't want it to. And if I hesitate on a letter it starts erasing everything I just typed.

When I use the keyboard on my iphone 5, the keyboard takes a mind of its own. If I press a letter sometimes it puts the letter twice. It puts periods when I don't want it to and if I hesitate, the keyboard starts erasing everything I just typed. Is there a setting I need to change to make this go away?

What user troubleshooting have you tried? The user troubleshooting steps are restart, reset, restore from backup and restore as new. Usually a reset will fix most of the unusual actions by the device.

How can I prevent Magic Mouse from scrolling horizontally when I don't want it to?

I recently purchased a Magic Mouse to go with OS 10.6 Snow Leopard. It's a great mouse but it causes 2 problems:
If I leave it on "Scroll with interia" in System Preferences/Mouse, it scrolls horizontally when I don't want it to. Since I mostly work in Word documents, I often lose my place in the document this way. On the other hand, checking "Scroll without inertia" makes vertical scrolling, which I do all the time, a lot harder.
The mouse seems to cause what I think of as "fractures" in Word documents--words and parts of sentences will disappear or get crunched together , then reappear when I select the place where they vanished. They also reappear if I scroll vertically to get the problem area off the screen and then return to it. This wastes a lot of time at best; at worst, I'm afraid I'll lose work. The problem occurred once in a while with a Logitech bluetooth mouse I was using, but not as bad and not all the time.
I love the mouse's ergonomics and would like to keep it, but if I can't solve this problem, I'll have to return it. Would be very, very grateful for any tips! Thanks.

Always nervous about recommending sites I have no personal experience of. On the plus side it doesn't relate to any of the bad sites I am familiar with and it appears to be the developer's site ... but there is no contact point for you to ask questions. You said in your initial post it was to go with Snow Leopard but this version says it is meant for 10.7 and above. Did you notice that? I also notice several other references to Word and mouse and one person found the solution lay in the updating of word 2011 to its highest level. I can offer no more.

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

How do I stop the screen from magnifying or zooming in when I don't want it to?

The screen keeps enlarging when I don't want it to. How can I turn off this function in Lion?

There are a few ways to get the screen to "enlarge", so it depends on what you are doing to make it happen.
For example, on a trackpad you can double-tap (not click) with two fingers to zoom in web pages. Or you can slide two fingers in a spreading out fashion to zoom in.
Do you have any notion about what you are doing when the undesired enlarging occurs?
charlie

How do I turn off Firefox checking for updates (I am fed up with Firefox continually asking to update when I don't want to due to previous bad experiences)

I would like to turn off firefox checking for updates
I don't want to update due to previous bad experiences with updates (version 4 and version 5)
I am frustrated by being reminded on a daily basis to update when I don't want to

Use
*'''Firefox button -> Options -> |Advanced | -> |Update|''' and uncheck the update option, or opt to ask first.
* see [[Options window - Advanced panel#w_update-tab]]_update-tab
* and to downgrade
**[[installing a previous version of Firefox]]
** and the download itself [http://www.mozilla.com/en-US/firefox/all-older.html]
Also note that currently
* firefox 3.6 is still supported, and has had recent security updates
* plans are to continue supporting it despite any comment on the download page
**(not sure how long for but see https://wiki.mozilla.org/Firefox/Planning/2011-09-07#Questions.2C_Comments.2C_FYI ) confirming continuing support for Firefox 3.6
* Firefox 3.6 has updated with security fixes, so is I think now 3.6.22 ; but it is NOT currently trying to upgrade its users to the current firefox release (Firefox 6)

Why am I always forced to upgrade Firefox when I don't want to?

I asked this question once b4, & never got a response. Probably because Firefox sucks royally, & they're afraid to answer my question. I'm always forced to upgrade Firefox when I don't want to. I get this stupid little pop-up for 1-4 days saying the new version is available. I ignore it, & without warning upon starting up my computer, Firefox upgrades itself. First of all, I F'ING H8 THAT! Second of all, I WANT TO MAKE THE BLOODY CHOICE WHETHER OR NOT I WANT ANOTHER SUBSTANDARD FIREFOX UPGRADE!! The ONLY reason I stay w/Firefox is that IE sucks even more, & you can't play any Facebook games w/IE. Firefox dev's, I realize I'm just an insignificant user & you don't really care about any of us, but really, must you force us to upgrade? Hmmm, I may just move on over to Chrome.

You can turn off automatic updates, for details see the "Configuring update options" section of this article - https://support.mozilla.com/kb/Updating+Firefox
Turning off automatic updates in Chrome is not as easy, it involved editing the registry.

My wifi keeps coming on when i don't want it to. How do i disable it and keep it off?

My wifi keeps coming on when i don't want it to. How do i disable it and keep it off?

kcquestions,
That's a very good question! It's important to be on the network you want to be on. How are you turning the wi-fi off? If you go into your settings there should be a wi-fi switch as the second option from the top. If we turn it off there it shouldn't come back on until you tell it to. If you select that and press the menu button (3 dots in the top right corner) you can also turn off "Allow wi-fi scanning" which can help not get notified of them when wi-fi is off.
AndrewT_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

I have 2 cell numbers on my account both have different dates of when the data usage resets. where can I find the correct date ?

I have 2 cell phones on my account. Both have different dates for the data usage to reset. Where do I find the correct date for this data usage to change?

rumfeltb, that's kind of odd. Are both lines on the same plan? You can view your billing cycle date online at My Verizon or at the My Verizon Mobile Application. Click http://vz.to/1nvKlnG to sign in as the Account Owner.
For more tips on how to manage your data usage, click http://vz.to/1hvu4tP
LasinaH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

FireFox does SESSION RESTORE when I don't want it to

I made sure I set everything to go back to my homepage:
Options, General, When Firefox starts : Show my homepage
(Google news)
But:
When I watch msnbc news from their streaming window, I continue to surf the net, while keeping msnbc's video window open (I like to listen to the news when I surf the web).
When I'm done viewing a site I close the webpage (but keeping nsmbc's video window open). When I re open Firefox, it will go to the last page I viewed, not my homepage.

Once I had the problem that firefox was opening the pop-up windows even when I didn't want them to be opened. Well I don't know how I corrected the problem. I think you should try to reset your settings and then try again.

Firefox blocks popups when I don't want it to

I had to reset Firefox and it works fine now with one exception: It blocks popups even though I don't want it to. I have unchecked the box in Options that relates to blocking popups. I have rebooted several times all to no avail. Practically every web site I seek is blocked until I hit the "allow" button that appears when I try to open the site. I can't find anything in the tech docs to answer this question and don't know where else to look.

Once I had the problem that firefox was opening the pop-up windows even when I didn't want them to be opened. Well I don't know how I corrected the problem. I think you should try to reset your settings and then try again.

ITunes 8 keeps randomly opening when I don't want it to.

I just downloaded the new iTunes 8 yesterday, and today while working on my computer, iTunes Randomly opens up when i don't click on it or anything. is there anyway to make this stop or how can i get the old version of itunes back?

I have to agree. I've been using iTunes/iPods exclusively for listening to podcasts since 2008, and within the past year it's just gotten increasingly frustrating and confusing to use both iTunes and my iPod for this purpose. I just found this thread because my iPod auto-deleted a podcast that I'd only listened to for 10 minutes; and I don't want it to ever delete podcasts without my consent. Truly infuriating.

My data usage resets when I don't want it to

Similar Messages

Maybe you are looking for