My Disk Utility is not working, also can't eject a mp3 player

I attached the mp3 player to the computer and downloaded some music on it. This went OK. When I went to eject it by right clicking on the player and choosing eject, it would not eject. So I opened Disk Utility to try and eject the disk and now find that Disk Utility won't open.
When I do force-quit Disk Utility the message says Disk Utility is not responding so there is a problem with Disk utility.
This is the first time I've had problems with Disk Utility and with ejecting a disk.
I don't want to pull the mp3 player out as it could do something funny to the disk as that happened before when I accidentally removed the mp3 player without ejecting it first.
However, the mp3 player has been OK for a while now and this happens.
What can I do?
Should I restart the computer and see if that solves the problems?

Are you receiving an error message when you try to eject via the Finder? Normally you should get a message along the lines "The disk * could not be ejected because the application * is using it" or something like that.
You could just shut down and unplug the mp3 player then, but it would be interesting to find out the cause of the problem. Do you know exactly what files are on the player?

Similar Messages

Disk Utility is not working for me.

I have had a nightmare trying to install a Boot Camp partition on my brand new 27" iMac with 3TB Fusion Drive and running 10.8.4.
When trying to use Boot Camp Assistant, it would start the partition, then not finish. I quit BCA, tried repairing both the partition and the disk, that didn't help either. So I went into Disk Utility to create a new partition with no file system on it, assuming I could just use Boot Camp Assistant to format it when the partition was created. It would start, but not finish. I tried Repairing the disk and the partition, neither helped.
So I booted with CMD+R, launched Disk Utility, and tried to create a 500GB empty partition. It started and just never quit, so I CMD+Q, got out of it, went back to Disk Utility, I found that I now have a 1.22TB empty partition and a 1.78TB Mac Partition. This is probably my own fault, I should have just let it run, but after 20 minutes, it wasn't moving.
I figured that would work okay, so I tried installing with BCA, but found it's looking for an HFS+ partition to resize and wouldn't work with an empty partition, so I figured I'd just format the empty partition as HFS+ and install with BCA. Unfortunately, I can't get Disk Utility to format the partition. I select the empty space, it puts a white block on it like normal titled Untitled 2, I select Mac OS Extended (Journaled), hit apply, something flashes very briefly over the "capacity" line, and then nothing happens. Hit revert and it shows up with the Macintosh HD partition and the empty partition. No matter what format I choose, nothing happens. If I try to exit, it tells me that changes have not been saved.
I'm trying to just extend the Mac partition, but the resizing option is not available. I can't drag it to cover the Free Space partition, I can't type in the Size to resize it by number, I can't do anything. I've tried to repair the disk and the partition, nothing happens. I can't reclaim the space no matter what I do.
At this point, all I want to do is recover the entire space of the hard drive for Mac OS. I'll try again with Boot Camp Assistant after Apple works the kinks out.
Any help would be appreciated.

The Boot Camp Assistant in 10.8.4 should be able to partition your 3TB+ drive so you can have Windows. If Disk Utility is not working then your disk is corrupt. Backup all your data using Time Machine. Erase the volume and restore from Time Machine backup. You can use the ‘OS X Recovery Disk Assistant’ (http://support.apple.com/kb/DL1433). Open Recovery Disk Assistant and follow the on screen instructions to create a Recovery HD on the external drive. When the Recovery Disk Assistant completes, the partition will not be visible in the Finder. To access the external Recovery HD, connect the drive, then restart the computer and hold the Option key. Select Recovery HD from the Startup Manager. You would need to re-install Mountain Lion up to 10.8.4. Then ran Boot Camp Assistant and then install Windows. Once you have confirmed that Windows is running then open up Migration Assistant (in the utilities folder) and migrate your Time Machine backup back on to the hard drive.

Disk utility functions not working properly

Most functions on my disk utility are not working FOr example the burn button is dimmed and out of function I tried erasin the com.apple.diskutility.plst but nothing happen
Message was edited by: DDGT

DDGT:
Let me just post some general directions and see if you recognize them as the way you did them:
1. Repair Disk Permissions
While booted from your internal HDD
Go to (Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left column and First Aid in main column.
Click Repair Disk Permissions at bottom left.
2. Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
+A problem with the restore function also accured ( i tried to restore my Macintosh HD to an external if anything wrong happens Un fortunatly the Hd has something wrong and DU cant fix it properly+
First tell me about the HDD to which you are trying to install.
• Is it a firewire, firewire/USB, or USB HDD?
• Does the HDD have anything on it currently?
• Was the HDD formatted Mac OS Extended before you attempted installation?
• What method did you use in trying to backup the internal HDD to the external? e.g. what software did you use? Were you using Disk Utility or another backup software?
You responses will help me give you specific directions in terms of how to go about accomplishing what you wish to do.
Please post back with information on the points noted above.
Cheers
cornelius

Disk Utility backup not working under Cmd R mode

I upgraded my OS to 10.8.2. After doing so, when I do my normal system backup with Disk Utility, the system goes into sleep mode and the backup stops. I've done this many times in the past so I am not new to this. I've read a few articles/posts with people having the same issue. Why is apple not fixing this important bug? I can't backup my system. I have "verified disk" and it has no errors so that's not the issue. The backup image starts to backup to my usb external drive then the screen dims and the system goes to sleep after about 5% and the flash drive stops flashing so it's not longer backing up. When I press escape or any key, it resumes the backup but this takes hours. I can't sit in front of the computer to keep moving my mouse. HELP!!!
I use Disk Utility 13. I reboot and press Command R and then use the Disk Utility from there.

You need automatic, frequent backups that don't require you to shut down the system, and that preserve some history. Using Disk Utility in Recovery is good for backing up a system that won't boot, or when preparing to erase and restore a volume, but what happens if you delete a file and then decide a week or a month later that you needed it?

Disk utility is not working with 10.9

when i try to open disk utility , a massage appear says (you cant use this version of the application "Dish Utility" with this version of OS X)
Anyone know how to solve this ?

So, it seems you update to 10.9 but disk utility didn;t update?
Run software update to make sure verything is up to date.
After that, I'm at a loss.
i am not fond of incremental upgrades. Back in the days of DVDs I did clean installs - always.
Grant

10.4.5 updater and Disk Util now not working

getting "Disk Utility internal error Disk Utility has lost its connection with the Disk Management tool and cannot continue. Please quit and relaunch Disk Utility"
1. quit and relaunch Disk Utility still no joy
2. login as another user - no joy
3. try removing iTunes packages - no joy
4. restart Tiger Server- no joy

yeah, now we have the answer to your question, I didnt have time to include this tactic in my previous post:
a. load Tiger DVD client disk into Mac mini hosting Tiger Server 10.4.5
b. launch Disk Utility
c. click Verify Perms
d. DU finds various problems, finishes stating it repaired them
e. click Verify Perms again
f. DU finds various problems, finishes stating it repaired them
g. click Verify Perms again
h. DU find no problems, finishes stating it repaired them
So, restart this Tiger Server with its own hard drive, then run DU from that hard drive: same error message once again
Perhaps this is a benign error ?

Flash disk utility is NOT working...

I have a Compaq Mini 110c-1105DX netbook and have been trying unsuccessfully for well over a year to get some kind of recovery disks. I've purchased a phantom DVD burner to create iso files to transfer off the netbook and save on dvds, that was unsuccessful. Purchased an 8 GB flash drive to use with the suggested Flash Disk recovery program... it was too small. Invested in anotehr flash drive - 16 GB... and all I get is errors.
It formats the drive, then gets down to "copying the recovery image" and then gives an error:
the error box is entitled MAKE RUFD7
the message is:
copy file fails
from d:\preload\base.wim to f:\preload\base.wim
what am I supposed to do? phone support was no help, they said basically that they can guarantee that these add-on programs will work on any specific model! He recommended I just buy a USB dvd burner... well, had I not purchased 2 apparently useless flash drives I probably could have. Has anyone else had this problem and gotten past it?
I'm soooo frustrated!

Can anyone help me with this? I've now used up my ONE restore disk creation... and it doesn't work. Is there any other way to test this? It looks like junk when I boot from it.
Can I make a windows restore disk instead? Would that put win7 back without all the HP bloatware?
I'm assuming HP's little program was faulty and they don't care, so I have nothing. The program itself proclaimed itself successful after it finished. Unfortunately the netbook didn't agree...

I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too.

I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help. can anybody help me with my problem? thanks!

When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
Also have you tried all possible troubleshooting steps found over here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

HT201240 how do a reset my mac os x if my disk drive do not work? I bought this laptop from a local exchange group on facebook! can anyone help me ?

Can someone help me i bought a macbook os x and it has a password to login but the person i bought it from does not know the password so im stuck with a macbook that i cannot login ? it there a way to reset it? ALSO I read that you can restart it with the cds and i got some but the disk drive does not work !

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
     OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

Disk Utility: Does it work or not? What has changed?

Hello:
After upgrading just about five hours ago to Leopard, and applying all upgrades and updates as well as security updates, I have noticed that Disk Utility is not th same snappy piece of software it used to be.
In Tiger, I used to run Disk Utility every time there was an upgrade or update and it took usually from less than a minute to sometimes a couple minutes. This time I get the bar immediately stating a 'less than a minute' operation but it results in something about 10 or more minutes.
It would be great if anyone from Apple or even someone with Technical information would post why is this, and what has changed with Disk Utility and how can we make sure that new permissions are fixed when the new Disk Utility can't do so. Like in my case I receive the following after the long wait.
+Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.+
+Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.+
+Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.+
+ACL found but not expected on "Applications".+
+ACL found but not expected on "Library".+

On my Mac it normally runs fine and fast. The SUID errors your getting are harmless. See this.
Apple OS X 10.5: Disk Utility's Repair Disk Permissions reports a permissions issue with ARDAgent
If they bother you run the Mac OS X 10.5.1 Update again. It got rid of all mine when I did this.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Disk Utility reports "resource busy" and can't create an disk image

HI,
Just succesfully updated to Mountain Lion on my MBA and iMac. No problems. A very smooth proces.
But, on my iMac the Disk Utility are not able to create new images at all! I'm not sure if this relates directly to the update, as
DU works fine on the MBA.
I have tried to create a simple disk image from a folder, sparse bundle disk images and sparse disk images - with and without encryption.
They al gave this output from DU: "Unable to create "MYDiskImage.sparsebundle." (Resource busy).
I understand from other postings on the web that others have experienced the same message from time to time, but have not seen a fix for it anywhere.
I can see the "disk iamge" in the DU window (left pane) but are not able to locate it with Finder or on the computer anywhere, but are even able to "repair the
disk image with DU, but then there is actually no disk image when trying to locate it. Very strange.
Any help?
The DU log has this info:
1. Creating a sparsebundle
2012-08-01 07:46:16 +0200: Creating Image “MyDiskImage.sparsebundle”
2012-08-01 07:46:16 +0200: Initializing…
2012-08-01 07:46:16 +0200: Creating…
2012-08-01 07:46:27 +0200: Formatting…
2012-08-01 07:46:28 +0200: Finishing…
2012-08-01 07:46:29 +0200: Unable to create “MyDiskImage.sparsebundle.” (Resource busy)
2012-08-01 07:46:29 +0200:
2012-08-01 07:47:01 +0200: Verify and Repair volume “disk3s2”
2012-08-01 07:47:01 +0200: Starting repair tool:
2012-08-01 07:47:01 +0200: Checking file system2012-08-01 07:47:01 +0200: Checking Journaled HFS Plus volume.
2. Creating a disk image from a folder
2012-08-01 07:59:10 +0200: Creating Image “Parallels køb juli 2012.dmg”
2012-08-01 07:59:10 +0200: Initializing…
2012-08-01 07:59:11 +0200: Creating…
2012-08-01 07:59:20 +0200: Finishing…
2012-08-01 07:59:21 +0200: Unable to create “Parallels køb juli 2012.” (Resource busy)
2012-08-01 07:59:21 +0200:

Hi Darth,
Thanks for the suggestion. Somehow I managed to solve the issue (the question was posted in July), I think I restarted the computer a couple of times, but it's interesting that you mention Drive Genius and Drive Pulse, as I also had that app running!
Maybe Drive Pulse was also turned of here in my process and helped to solve the issue.
Anyhow, thanks.

My hardware RAID 1 only showing up in disk utility and not finder.

Last week I finally was able to take my early 2011 iMac in to have my Seagate 1TB hard drive replaced for the recall.
Late 2010 model iMac
OS X 10.6.8
OWC Mercury Elite Pro 4TB x 4TB Hardware RAID
When I took it in the RAID 1 was working just fine. When I finally got the iMac back and booted everything up the RAID 1 was getting the dialog box that read "The disk you inserted was not readable by this computer."
I have tried going into disk utility to see if I can verify the disk and then saw it is coming up as two different volumes... Along with those two different volumes, I can not go to click verify as it is greyed out.
I contacted OWC and they said they have never heard of this and had two solutions, to try a software like diskwarrior, or if that didnt work I can take the drives out and try another external dock to see if it is the RAID hardware.
If anyone has any ideas as to what could help with this situation that would be great as I was under the impression (and told by a number of other people) that having a RAID 1 as my backup was good and should not need anything else. I just want to be able to get all the data off then I will rebuild it or send it into OWC.
Thanks!!!!

So a fault in the Hardware Raid controller could make it not read properly? I am planning on having a good backup set up after this!
As for the screenshot, the original was not set up with the SoftRaid. When I got the computer back I installed that to see if that may pick it up and make it at least readable to save the data on it. The two in question are the highlighted 4TB drives, which befor also read as one drive as it was set up in the OWC enclosure as a hardware raid.

My external HD will show in Disk Utility but not in Finder

Here is the External hard drive info.
Type :           Partition
          Disk Identifier :           disk1s2
          Mount Point :           Not mounted
          File System :           Mac OS Extended (Journaled)
          Connection Bus :           USB
          Device Tree :           IODeviceTree:/PCI0/EHC2@1A,7
          Writable :           Yes
          Universal Unique Identifier :           A15B5F63-3A83-30E2-B2D2-7EF07CF136BE
          Capacity :           999.86 GB (999,860,912,128 Bytes)
          Owners Enabled :           No
          Can Turn Owners Off :           Yes
          Can Be Formatted :           Yes
          Bootable :           Yes
          Supports Journaling :           Yes
          Journaled :           No
          Disk Number :           1
          Partition Number :           2
It will show up in Disk Utility but not show up in finder. Ive tried mounting it, verifing it, repairing it. Nothing is working. I dont know what else to do! Please somebody help! I was in the process of backing this up when this happend

Also, here is the log of my disk utility with my external. Im not sure if that will help at all
===== Tuesday, September 3, 2013 11:18:20 AM Pacific Daylight Time =====
2013-09-03 11:18:24 -0700: Verifying partition map for “Seagate Backup+ RD Media”
2013-09-03 11:18:24 -0700: Starting verification tool:
2013-09-03 11:18:24 -0700: Checking prerequisites
2013-09-03 11:18:27 -0700: Checking the partition list
2013-09-03 11:18:27 -0700: Checking for an EFI system partition
2013-09-03 11:18:27 -0700: Checking the EFI system partition’s size
2013-09-03 11:18:27 -0700: Checking the EFI system partition’s file system
2013-09-03 11:18:27 -0700: Checking all HFS data partition loader spaces
2013-09-03 11:18:27 -0700: Checking Core Storage Physical Volume partitions
2013-09-03 11:18:27 -0700: The partition map appears to be OK
2013-09-03 11:18:27 -0700:
2013-09-03 11:18:27 -0700:
2013-09-03 11:18:43 -0700: Verifying and repairing partition map for “Seagate Backup+ RD Media”
2013-09-03 11:18:43 -0700: Starting repair tool:
2013-09-03 11:18:43 -0700: Checking prerequisites
2013-09-03 11:18:43 -0700: Checking the partition list
2013-09-03 11:18:43 -0700: Adjusting partition map to fit whole disk as required
2013-09-03 11:18:43 -0700: Checking for an EFI system partition
2013-09-03 11:18:43 -0700: Checking the EFI system partition’s size
2013-09-03 11:18:43 -0700: Checking the EFI system partition’s file system
2013-09-03 11:18:44 -0700: Checking all HFS data partition loader spaces
2013-09-03 11:18:44 -0700: Reviewing boot support loaders
2013-09-03 11:18:44 -0700: Checking Core Storage Physical Volume partitions
2013-09-03 11:18:44 -0700: Updating Windows boot.ini files as required
2013-09-03 11:18:44 -0700: The partition map appears to be OK
2013-09-03 11:18:44 -0700:
2013-09-03 11:18:44 -0700:
2013-09-03 11:18:46 -0700: Verifying volume “Steven Polanco Mac”
2013-09-03 11:18:46 -0700: Starting verification tool:
2013-09-03 11:18:46 -0700: Checking file system2013-09-03 11:18:55 -0700: Checking Journaled HFS Plus volume.
2013-09-03 11:18:55 -0700: Checking extents overflow file.
2013-09-03 11:18:56 -0700: Checking catalog file.
2013-09-03 11:19:10 -0700: Checking multi-linked files.
2013-09-03 11:19:10 -0700: Checking catalog hierarchy.
2013-09-03 11:19:22 -0700: Checking extended attributes file.
2013-09-03 11:19:34 -0700: Checking volume bitmap.
2013-09-03 11:19:35 -0700: Checking volume information.
2013-09-03 11:19:35 -0700: The volume Steven Polanco Mac appears to be OK.
2013-09-03 11:19:35 -0700: Repair tool completed:
2013-09-03 11:19:35 -0700:
2013-09-03 11:19:35 -0700:
2013-09-03 11:19:39 -0700: Verify and Repair volume “Steven Polanco Mac”
2013-09-03 11:19:39 -0700: Starting repair tool:
2013-09-03 11:19:39 -0700: Checking file system2013-09-03 11:19:39 -0700: Checking Journaled HFS Plus volume.
2013-09-03 11:19:39 -0700: Checking extents overflow file.
2013-09-03 11:19:40 -0700: Checking catalog file.
2013-09-03 11:19:54 -0700: Checking multi-linked files.
2013-09-03 11:19:54 -0700: Checking catalog hierarchy.
2013-09-03 11:20:06 -0700: Checking extended attributes file.
2013-09-03 11:20:18 -0700: Checking volume bitmap.
2013-09-03 11:20:19 -0700: Checking volume information.
2013-09-03 11:20:19 -0700: The volume Steven Polanco Mac appears to be OK.
2013-09-03 11:20:19 -0700: Volume repair complete.2013-09-03 11:20:19 -0700: Updating boot support partitions for the volume as required.2013-09-03 11:20:29 -0700: Repair tool completed:
2013-09-03 11:20:29 -0700:
2013-09-03 11:20:29 -0700:

My Disk Utility is not working, also can't eject a mp3 player

Similar Messages

Maybe you are looking for