My document scanner will not be recongnized anymore after install of maverick

I have a ds 600 document scanner, it used to work in preview and scan documents now it is not recognized any suggestion went to brother web site for update it did no good. please help

message says Your photo library will not be readable by previous versions of iPhoto after the upgrade.
Are you seeing this? Has iPhoto changed the colors from sunset red to turquoise?
I assume, after the upgrade to Mavericks an update to iPhoto 9.5 got automatically installed? Then what you are seeing is a normal warning message.
iPhoto needs to upgrade your iPhoto library to a new format to be able to work with it. Only this will cause the iPhoto library to be in a new format and you will no longer be able to open the library with older versions of iPhoto. Are you using your iPhoto library on other computers with older iPhoto versions as well? If not, that is no problem and you can let iPhoto upgrade the library.  Just press the "upgrade" button.
Only take care to have a backup of the library before you proceed and let iPhoto convert it, just in case you will want to revert to an older system version.
-- Léonie
What happens to my existing photos?
Your existing photos are stored in your iPhoto library, and they will be still accesible after the upgrade of the iPhoto library to the format that iPhoto 9.5 needs to work with this library.

Similar Messages

  • HT4972 my computer will not recognise my iphone after installing the latest version of itunes any ideas how to rectify this

    my computer will not recognise my iphone after installing the latest version of itunes any ideas how to fix this

    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • Will not print black ink after installing new HP cartridge

    HP Officejet 4620, Windows 7....installed new HP black ink cartridge and now it will not print black at all. I followed all online tips in the help section, even cleaned the vents on the cartridge itself but only prints blank page. No error messages are shown. Diagnostics ran and says all is working correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working just fine before inserting new black cartridge.
    This question was solved.
    View Solution.

    I just spent  1 1/2 hours on the phone with HP Tech Support but it was worth it.  They are sending a replacement printer no charge to me (expect I chose to pay extra for next day shipping).  Even though my printer is out of warranty!!!  I normally buy HP products anyway but will definintely stay with this brand based on their excellent customer service and support.  Thank you once again for your initial help online and for directing me on the right path!!!

  • Adobe acrobat pro will not open 3 weeks after installing design web pro?

    I installed Design web premium on my computer and all programs work and adobe acrobat pro worked for 3 weeks and now it will not open.  I am at a loss. Help!!!

    If Acrobat will open, go to Help>Repair to try to fix it. If not, go to Control Panel>Programs & Preferences and update from there. After the update, go back to the help menu and do the updates.

  • Acrobat will not accept license code after installing cs4 premium upgrade

    We just upgraded to CS4 premium, from CS3 premium. In doing so acrobat replaced Acrobat 8 pro with Acrobat 9 pro.
    All our tools only work in Acrobat 8 pro, so we unistalled the Acrobat 9 pro and the software will not accept the keys from the product boxes that was used to install the software. the 30 day trial period comes up where you can enter a number or buy "version 9".
    Is there anything special to fix this mess that anyone has found?
    We are a printing company and use tools from enfocus, quite, and other special plugins that only support up to version 8?
    Before we totally uninstall CS4 premium we wanted to see if anyone else has had this issuse or knows who to get with at Adobe to get a key that will work for the licensed software.
    Stephen
    API

    You'll need to contact Adobe customer service at 800-833-6687.

  • New Epson WF-7620 will not print; is offline after installing setup software

    This is a problem that took me many hours to solve; but I did solve it.  I thought I would offer it up so no one has to go thru the pain I did.
    The problem is that during the Epson set-up procedure for Wireless printing, the mac cannot find the printer (or verify the printer exists) even though the printer has an IP address assigned to it.  The reason for this is the printer (mine at least) comes configured with Bonjour turned off . . . and you'll need to turn this in for any mac to add the printer in a conventional way.
    The way to turn Bonjour on is as follows:
    1.  Pull up a browser and type in the IP address assigned to the printer.  On my home wifi network it will be something like XXX.168.1.3 where XXX is some 3 digit number.  Once you pass thru the security queries the browser puts up, proceed to that site.  You'll see a web page with detail on the printer.  Go to Wifi/Network Settings->Services->Protocol.  Find the Bonjour Settings and click on Use Bonjour.  Exit this page and you'll see your printer when you add a Printer from Settings->Printers & Scanners--> the Plus sign (to add).

    Try Linc's suggestion first.  That should cure your issue.  If not, here's something else to consider:
    PrinterMaccer wrote:
    I installed the software from the site ...
    Apple keeps a set of current software for Epson printers.  You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key).  Then download Apple's software version from here:
    Epson Printer Drivers v2.18 for OS X
    Finally, set up the printer as shown here:
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • New SpeedGrade CC will not launch or open after install

    I am unable to launch or open the new SpeedGrade CC after downloading and installing on a MacPro tower (MacOS 10.8.4).
    I have repaired permissions, uninstalled several timeswith the Adobe Uninstaller and reinstalled several times via Creative Cloud, emptied the /tmp folder, etc. with restarts inbetween.
    All the other CC apps that I downloaded open fine. Only SpeedGrade refuses to open. Clicking the app icon only causes it to bounce once and do nothing else.
    Any thoughts on what to try next?
    Thank you,
    - john

    MacOSX 10.8.4
    I seem to have solved the issue....
    It appears the Speedgrade installer was confused by the fact that Root (System Administrator) was enabled on this machine.
    I logged in as Root.  Launched Speedgrade and it opened just fine.  I quit, copied the prefs from System Administrator's Documents folder and placed them in my User/Documents/Adobe folder.
    Logged back in as myself.  Still didn't work.
    Disabled Root User
    http://support.apple.com/kb/PH11331
    Speedgrade now launches perfectly.
    Not sure why I had Root enabled on this machine.  I must have done it years ago to fix something else.

  • HT1386 My ipod touch will not sync to itunes after installing version 11.  My computer recognizes that it is connected, but itunes, media moneky, and sharepod would not recognize it.  I tried every suggestion apple and other community folks suggested-no l

    itunes diagnostics only finds that no ipod is connected when it really is.  I have tried different cords, unistalled/reinstalled itunes, erased my ipod started over, restarted computer, etc.  My ipod is useless now that I cannot sync it wth itunes and there is now no music on it.  Its a paper weight now.  All of the posts I have read have no solution for this.  I would love to go back to itunes 10 because none of this occured until I downloaded that version. 

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Flex apps will not run in Browser after install

    I am running IE 6 (Wintel) and have tried both installers for
    the most recent Flash player -- activeX and the other standalone
    one. I cannot view any Flex apps now in my browser - most notably
    the derby examples. It seems to hang on a screen that has the title
    "Flash Player Installation" -- like something in the apps is
    sniffing for the player, not finding it, and then hanging on some
    "automatic" install hook that has been built for Flex but not
    completely implemented yet. That is my suspicion, but I just want
    it to work -- do I need to uninstall/reboot/install again ? Any
    tips would be greatly appreciated as I need to start a Flex 2
    project next week. thanks.

    You definatately need to run the unistaller 1st. Also make
    sure that all IE browser are closed, and that nothing that could
    possibly be using IE functionality (things like outlook, file
    manager etc...) are not running or the uninstall may well fail.
    Once this is succefully accomplished, re-install.

  • Contribute will not edit web page after installing Security Update 2007-004

    I have been unable to edit my web site with Contribute 3.11 after I installed the 2007-004 Security update. When I select the web page to edit the spinning beach ball appears and if I look in top it shows Contribute using 100% of the system. I have to do a force quit on it to be able to do anything.
    Has anyone else noticed a problem with this or have a possible solution? Thank you.
    Intel 20 in iMac   Mac OS X (10.4.9)   Powerbook 15in 1.67

    You might want to ask in the forums where Contribute users and Adobe hang out, if you haven't already:
    http://www.adobe.com/support/forums/

  • My Officejet Pro 8500 A910 will not print green anymore

    I have a Officejet Pro 8500 A910 and it will not print green anymore. I have done the cleaning procedure and  there is ink in every color. When I print the PQ Diagnostics report  the green box i missing. What can I do?

    Hello FP160,
    I see that this is your first visit with us here on the HP Forums. Please let me take a moment to say "Welcome".
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    Sorry to hear that you are having some issues when it comes to printing anything in green.  I see that you have also attempted some steps in cleaning the printer.  I am going to give you a document that gives great detail in troubleshooting Print quality / Defective printouts.  This link has different documents that deal with print quality issues.
    One other thing that could be affecting the Ink Delivery System is how you have the power cable connected. If you have it connected to a power bar/strip, please remove it and connect it directly to a wall outlet.  Here is a document that uses a LaserJet printer as an example but it is meant for all HP products in general.  Please click the link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please write me back if you are still having issues or if you have additional questions.
    I look forward to hearing from you but if it is not today, I hope you have a Fantastic Tuesday.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized".  Any ideas?

    Since I downloaded Snow Leopard on my iMac, my HP all-in-one C7280 scanner will not work. It says "scanner not found, scanner could not be initialized".  Any ideas?

    Hi,
    I suggest uninstalling the printer drivers from your HP printer. The go to System Preferences> Printer & Fax and in the printer list box go ahead and reset the printing system. Do that by right clicking over the printer list box ad the option should appear. After that close system preferences and reinstall your printer drivers from the HP CD. After installation check if your printer works as expected, if it does, stop here and ignore the rest of the message.
    If you don't have the install CDs for the printer or the previous step does not work; connect your printer to your Mac via USB and then again go to system preferences. Open the Print & Fax menu and in the printer list box you should see a "+" sign. Click on it, and a new window should appear with a list of printers that are available to you. If that's the case, go ahead click your printer name and wait for the computer to look in the Apple servers for the drivers. When searching is finished click the "install" button. This process will open software update and install the neccesary drivers.
    After that, you should be able to scan documents with the Preview App.
    For more information on the printing system in OS X Snow Leopard visit:
    http://support.apple.com/kb/HT3771
    Hope this helps!

  • My fingerprint scanner will not work with Firefox 4.

    I used to be able to use my fingerprint scanner to log into all of the websites I use like Facebook, YouTube, Yahoo etc... But now since I updated to Firefox 4 it doesn't work anymore. The program that I use is called Digital Persona. How do I fix this issue?

    Another user got this from Digital Persona. <br />
    "Thank you for contacting DigitalPersona. There will be no update releases for DigitalPersona Personal in the future. There will be no updates for Firefox 4 nor Internet Explorer 9. IF they work they work, if they do not work with DPPersonal, then you will have to decide to either keep DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona is leaving the consumer market and is focusing on business applications. In fact, DigitalPersona Personal will not longer be supported after Mid-April of this year. We apologize for any inconvenience this might cause. Sincerely, Tech Team "
    You could try this extension. <br />
    https://addons.mozilla.org/en-US/firefox/addon/fingerfox-se/

  • My HP Photosmart Printer/Scanner will not scan since installing Maverick help

    Since installing Maverick my HP printer/scanner will not scan documents print or save them, how can I fix this?

    this worked for my HP printer/scanner:
    Try:
    uninstall all printer manufacturer apps and "utilities"
    go to System Preferences > Printers & Scanners > Print
    if your printer is there in the column on the left:
    control-click on your printer
    select "Reset Printing System..." and "reset" in the dialog that follows
    if your printer is not in the column on the left, go to the next step.
    do a factory reset on your printer. You'll have to consult the printer manual for how.
    if you connect to your printer/scanner via wifi, reset the wifi system:
    power down everything: modem, router, computer, and printer
    power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
    enter your wifi password in your printer so it can connect to the network
    if you do not connect via wifi, go to the next step
    go back to printers & scanners and it should see your printer and download a driver for it from Apple.If it won't, then try going to the HP website and there may be a new software package for your printer that is compatible with Mavericks. Download and install it.

  • After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

    After I upgraded to Maverick my Epson WF-2504 scanner will not work.  There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download.  It tells me to go to "software update" ???  Any suggestions?

    Thanks Arthur,
    I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
    One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
    I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here.  If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
    I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
    Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
    A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
    Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

Maybe you are looking for