My files doesn't like to my audio

Hello! I don't have audio, but when I restart all over again my mac, the audio works, but when I use time machine and recover my files, my audio doesn't work again, what's wrong? =0

Try this, use a wooden tooth pick, or a Q-tip with the end cut off, and "ans gently massage the headphone jack" to help release the micro switch that switches between analog and digital output for the jack. There is a micro switch that gets stuck in the digital mode. (you can tell if there is a red light when you look in the headphone jack). This is the most common problem with this issue. If this does not fix it, please repost, as there are a number of other fixes. I hope this helps you. ATB

Similar Messages

Create desktop quietly fails - doesn't like my ".portal" file

Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal" file.
After going through the sequence of clicks, it just comes back quietly but the
desktop is not there. It only does this if I "Choose a Template". It seems that
it doesn't like something in my template file but gives no indication of what.
If I revert back to an old template file, it works. However, I also re-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil

Jeff,
Thanks for the reply.
The .portal file was created in workshop and workshop reads it fine.
I discovered that after deleting all my books and pages from the Admin Portal
library, it imported my .portal file successfully. I'm thinking it finds some
"Definition Label" conflict between those in the .portal file and what's in the
library.
Phil
"Jeff Mueller" <[email protected]> wrote:
>
Hi Phil - was there no error message on the console? If not, please
check the
portalServer.log file and/or wl-domain.log file for that server session.
There
should be an error message listed there. It sounds like it's most likely
bad
xml in the .portal file. Did you create the new .portal file in Workshop?
Does
it open correctly there?
Jeff
"Phil Grimm" <[email protected]> wrote:
Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal"
file.
After going through the sequence of clicks, it just comes back quietly
but the
desktop is not there. It only does this if I "Choose a Template". It
seems that
it doesn't like something in my template file but gives no indication
of what.
If I revert back to an old template file, it works. However, I alsore-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil

Encore CS4 Flash output - server doesn't like file names

Apparently my ftp server for my web site does not like files with spaces in the names, but Encore seems to use spaces in some of the file names for the png files in the menus. Is there any way around this? Can I force it to replace spaces with underscores? Can I go in and manually change the links and the file names (there aren't too many). this is very annoying - how could this happen?
Thanks,
Scott

If your server doesn't like spaces in file names, it's likely due to HTML address rules. However, these files won't be linked via HTML, but through the AuthoredContent.xml file directly into the SWF playing in the Flash player, which doesn't have the same limitations as HTML.
If your server is kicking a fuss up about this, replace the single space character in the PNG filename with an underscore character (do this at file system level), then edit the AuthoredContent.xml file and replace the space character in the PNG filename with an underscore character. Save everything, and then upload the files in the same hierarchy that Encore exports.
That should do it.

JSP referencinc taglib.tld in JAR file doesn't work.

I have some custom tags which work fine under Weblogic 5.1 when I do a
 normal deployment of files, including the taglib.tld. However, when I
 try to reference the taglib.tld located in a JAR file, then weblogic
 throws an error saying that it cannot resolve into a valid tag library.
 I am only doing this because I am testing the same site agains both
 iPlanet Web Server and Weblogic. iPlanet will only find the taglib.tld
 when it is in a JAR file.
 Can anyone shed some light on referencing the taglib.tld in a JAR file.
 This should work, as it is covered in the JSP 1.1 specification.
 FYI - the jar file is in the same location as the JSP which references
 it. The URI to the JAR file (in the JSP) is from the root of the site.
 Thanks for any help.
 -Scott Edwards


Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Read From Binary File doesn´t work on MCB2400 in LV2009 Embedded ARM

Hello,
I try to read a Binary File from SD-Card on my MCB2400 Board with LV2009 Embedded for ARM.
But the output is always 0, if I use my VI on the MCB2400. If use the same VI on the PC it works fine with the same binary file.
The
access to the SD-Card on the MCB2400 works in other cases finde, if I
try to read from a text-file it works without any problems.
Are thre any constraints for the "Read From Binary File"-Node in Embedded in comparison to the same node on PC ?
I have noticed that there is also a problem
with the reading of textfiles. If the sice of the file is about 100Byte
it doesn´t work anymore, too. I can´t understand it, because I read
always just one Byte. And even if the implementation in Labview is so
bad that it allways reads the total file in the ram it sould work. The
MCB2400 has 32MegaByte RAM, so 100Byte or even a few MegaByte should
work.
But this doesn´t seem to be the Problem for the Binary-Problem. Because even a 50byte Binary-File doesn´t work.
bye & thanks
amin
Solved!
Go to Solution.
Attachments:
SD_Card_Read-test.vi ‏12 KB

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

Firefox doesn't play video and audio, cann't download anything!

A very strange problem occurred a few days ago. I didn't pay attention on it at first ( I thought it was caused by my provider) but now I found that it's a real problem. Firefox doesn't play video or audio. For instance, it starts loading and that's all. The same is with playing music. In addition, I can't download any files and view a big image as quick as early.
What is more interesting sometimes Firefox just begins to work in ordinary way.

There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Perian, which rolls several codecs into one package, might also work.
If you just want to play the movie any way you can, you can also give this player a try:
http://www.videolan.org/vlc/
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

MP3-Library doesn't like some of MediaSource's ID3 t

Just a tip for MP3-Library users:
On rare occasions, MediaSource 3.30.2 will produce an ID3 tag that MP3-Library doesn't like. (This is pretty rare -- out of 45 tracks I updated the tags on, 6 did this.) This results in the file being displayed as corrupted. If you select "Analyze/Fix MP3," it finds a frame or two with random specifications at the very start of the file, followed by a single bad frame, and then all good frames.
If you check all availiable fix options (delete selected frames [check the junk and bad ones], delete garbage before st frame, delete garbage after last frame), it lops about 30 bytes off the end of the tag/header and takes a few good frames off the start of the file.
According to MP3Utility and EncSpot, there's nothing wrong with the files, and they play just fine in MediaSource, Winamp, and on the Zen. The header data that was destroyed doesn't affect the ID3 data. It only seems to have removed the Xing header. (No, I don't use Xing. LAME 3.97 alpha puts Xing-compatible headers on its VBR files.)
The following are the summary data that MP3Utility shows. This is from the original file, fresh out of LAME:
File size: 3,63,232 bytes
Offset to first frame header: 2,630 bytes
MPEG version .0; Layer III
Bitrate: VBR (Xing); Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 47 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 8,945
Estimated time: 3:54 (234 secs.)
This is after importing the file into the PC Music Library and clicking "Update Tag." I didn't modify anything, just told it to re-write the ID3 tag:
File size: 3,63,232 bytes
Offset to first frame header: 2,630 bytes
MPEG version .0; Layer III
Bitrate: VBR (Xing); Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 47 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 8,945
Estimated time: 3:54 (234 secs.)
And this is after MP3-Library "fixed" it:
File size: 3,629,325 bytes
Offset to first frame header: 2,600 bytes
MPEG version .0; Layer III
Bitrate: 224 kbps; Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 73 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 4,96
Estimated time: 2:0 (30 secs.)
No, MP3-Library DIDN'T chop 04 seconds off the file. The estimated frame count and length are WRONG because the Xing header was destroyed by MP3-Library. This header would normally tell MP3Utility how long the file really is, otherwise it takes the bitrate of the first frame and extrapolates that over the file length. (Without this header, many programs' progress sliders won't be as accurate.)
So, if MP3-Library tells you a file is corrupted after going through MediaSource and the file wasn't corrupted before, DON'T fix it. You'll only make things worse. I've never seen MediaSource or my Zen actually damage a file.
(At first, I told it to fix 'em. Now I'm going through and restoring the backups it made.)

i have used mp3-libary many times before because it said a large amount of my collection was corrupted. but it seams to be better.as i havent used media source to import them so i think they may have actually be corrupt. but interesting findings.

Dashboard doesn't work and com.apple.dashboard* files doesn't exist

Like the headline says, my dashboard doesn't work at all, and my com.apple.dashboard* -files doesn't exist in the preferences file.
Is there annyway to redownload or reinstall it?
Please help!

Hello there,
Have you tried killing the Dock Process through Activity monitoring and then relaunching it? I would also try logging out and then back in or doing a complete reboot of the machine to see if that helps.
If still no luck, it may be a good idea to trash the dashboard preference file.
The two dashboard preference files are in the following directory:
yourusername -> Library -> Preferences ->
The file names are:
com.apple.dashboard.client.plist
com.apple.dashboard.plist
Hope this helps.
B-rock

Voice file doesn't work anymore

Hi,
I recently had this meeting, so I decided to capture the sound in iMovie HD. The reason why I choose for iMovie is because I don't have Quicktime Pro and wanted to edit some of it right away.
Now, when I open the project in iMovie, the recorded audio file (called something like "Voice 1") seems to be damaged or unplayable. I don't hear anything when I try to play it. I can't seem to export it. Also, there's no volume, just the name of the audiofile.
What can I do to make it playable again? Is it stored somewhere? I used to be able to listen to it, but not anymore. I haven't changed anything. Sorry for my bad English!
~ Alex
EDIT: I see that this is in the wrong forum, I'll just wait and repost it later on. My apologies!
Message was edited by: Alexuanne

Hi,
I recently had this meeting, so I decided to capture the sound in iMovie HD. The reason why I choose for iMovie is because I don't have Quicktime Pro and wanted to edit some of it right away.
Now, when I open the project in iMovie, the recorded audio file (called something like "Voice 1") seems to be damaged or unplayable. I don't hear anything when I try to play it. I can't seem to export it. Also, there's no volume, just the name of the audiofile.
What can I do to make it playable again? Is it stored somewhere? I used to be able to listen to it, but not anymore. I haven't changed anything. Sorry for my bad English!
~ Alex
EDIT: I see that this is in the wrong forum, I'll just wait and repost it later on. My apologies!
Message was edited by: Alexuanne

Bridge doesn't like gif

My Bridge doesn't like gif extensions on the pictures. He cal-laps, the program re-installed on my mac, but the same problem. By gif it stops and I have to forced stop to quit the program. hen open again and the same problem appears.
jpg. or png ole but gif bridge won't replace or open or...

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

File doesn't sound the same when I return to it

I worked hard on a mix of a tune back in December. I have a bounce from that session that I listen to as a reference, but when I open the Logic File, some regions don't play, automation is off and all sorts of things are not the same. It's like the whole file has reverted to some old version with an old mix. The date of the last save matches the date of the bounce, so I cannot figure out why the file doesn't play down the way that I left it, even though I left it months ago.
Any thoughts?
Much appreciated...

Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate.

Server doesn't like web galleries from CS4

I've been trying to export a web gallery from Bridge, but when it's uploaded I get this error:
Forbidden
You don't have permission to access /Kauffman-2009/index.html on this server.
Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request.
The server doesn't have issues with other index.html files, it seems like there's something specific to the Bridge created ones. Does anyone know why this might be happening?

2 things to look for...
1) check to make sure that you have assigned read permissions to that directory. This is not something done in Adobe software. Consult your hosting provider for assistance.
2) check to make sure you do not have odd characters in your image filenames and descriptions used in the gallery. I recall the gallery function fell apart on previous versions if you had '&' in the filename or title/description because Adobe's script/function neglected to escape odd characters in the XML. I have not tried this in CS4; maybe it was fixed.

My Applet Jar file doesn't work !!

hello ,
I have written this java applet :
import java.awt.*;
import javax.swing.*;
import java.applet.Applet;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.URL;
public class test4 extends Applet implements ActionListener{
 private static final long serialVersionUID = 1L;
 private JButton B1 =new JButton("Forward ");
 private JButton B2 =new JButton("Backward");
 private JButton B3 =new JButton("Left");
 private JButton B4 =new JButton("Right");
private JPanel P1 = new JPanel();
private JPanel P2 = new JPanel();
private JPanel P3 = new JPanel();
private JPanel P4 = new JPanel();
private JPanel P5 = new JPanel();
private JPanel P6 = new JPanel();
private JLabel L3 = new JLabel(" ");
private JLabel L4 = new JLabel(" ");
private JLabel L5 = new JLabel(" ");
private JLabel L6 = new JLabel(" ");
private JLabel L7 = new JLabel(" ");
JSplitPane sppSplitPane0 = new JSplitPane( );
 public test4()
 JFrame.setDefaultLookAndFeelDecorated(true);
 sppSplitPane0.setDividerLocation( 250 );
 P3.add(L4);
 P3.add(B1);
 P3.add(L5);
 P5.add(B3);
 P5.add(L3);
 P5.add(B4);
 P4.add(L6);
 P4.add(B2);
P4.add(L7);
 P1.setLayout(new BorderLayout());
 P1.add("North",P3);
 P1.add("Center",P5);
 P1.add("South",P4);
 P2.setLayout(new BorderLayout());
 P2.add("North" , P1);
 B1.addActionListener(this);
 B2.addActionListener(this);
 B3.addActionListener(this);
 B4.addActionListener(this);
 sppSplitPane0.setLeftComponent(P2);
 sppSplitPane0.setRightComponent(P6);
 public void actionPerformed(ActionEvent e) {
 try {
 if (e.getSource() == B4) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?R");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else
 if (e.getSource() == B3) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?L");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else
 if (e.getSource() == B2) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?B");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?F");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 } catch (Exception err) {
 System.err.println("Error!\n" + err);
 showStatus("Error, look in Java Console for details!");
 public static void main(String[] args) {
 test t=new test();
 JFrame frame =new JFrame();
 frame.add(t.sppSplitPane0);
 frame.setSize(1100,700);
 frame.setVisible(true);
i made a jar file :
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!
please help me .
Edited by: Amera on Dec 27, 2009 2:51 PM

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Jar file doesn't work

I am quite new to java so I hope my question is not stupid.
I used bluej to realize an application.It works when executing the main method in bluej,but when I create the jar file,it simpy doesn't work.I have included the main class when creating the jar file.When double-clicking on the jar file, it makes the typical error sound of windows,but it doesn't show any message.
What is the problem?

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

My files doesn't like to my audio

Similar Messages

Maybe you are looking for