My first Applet gives error (been thru tutorial)

My HTML code:
<HTML>
<HEAD>
<TITLE> A Simple Program </TITLE>
</HEAD>
<BODY>
Here is the output of my program:
<APPLET CODE="HelloWorld.class" WIDTH=150 HEIGHT=25>
</APPLET>
</BODY>
</HTML>
My Applet code:
import java.applet.Applet;
import java.awt.Graphics;
public class HelloWorld extends Applet {
public void paint(Graphics g) {
g.drawString("Hello world!", 50, 25);
Both HelloWorld.html and HelloWorld.class are stored on my desktop.
My result:
Here is the output of my program:
...this is followed by a 150x25 pixel gray area! I dont see the words "Hello world!" written anywhere.
where am i going wrong?...all help appreciated!

all that i have installed is j2sdk1.4.1_01
i'd appreciate if you cud kindly either direct me to a site which tells me what all i need to run this or briefly list it out here itself
i have IE version6...I get no exception/error messages on the status bar...where else shall i be looking for an error message?
On checking the Tools->Internet Options under Microsoft VM, I had "JIT compiler for virtual machine enabled" checked...I have gone ahead and checked "Java Console"
What do u mean by "Which JVM did you compile with"?...Perhaps by mistake but I did not come across the concept of 'compiling' while going thru the Java Applet tutorial on this site!
please advise!

Similar Messages

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

In Windows 7, iTunes gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

I have same error except that i get it even when my phone is not connected.

SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Database connectivity problem in applet, but connects successfully thru app

hi all
my following code works successfully in appletviwer...
but in browser (ie 6.0)it does not even show textarea and
gives error at status bar as "exception : java.lang.NullPointerException: null string"
there is no problem to registerDriver...
but error is at getconnection...
os: windows xp, database : oracle8i, web server: apache
my db server,web server and html,class file all are on same machine...
pls help...
what could be the problem? may i need to do some web server settings?
thanks in advance
//CODE
import java.sql.*;
import oracle.jdbc.driver.*;
import java.awt.*;
public class AppletJdbc extends java.applet.Applet
     public void init ()
          TextArea outtext= new TextArea();
          add(outtext);
          Connection conn;
          try
               // Load the Oracle JDBC driver
               DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
               conn = DriverManager.getConnection("jdbc:oracle:thin:@172.25.12.46:1521:test","scott","tiger");
               outtext.appendText("connected");
          catch(Exception e)
               outtext.appendText(e.getMessage());
}

hi
yes i am accessing it in browser by giving("http://172.25.12.46/myfile.html"),
i think problem nullpointerexception was with TextArea..
now i have removed textarea and displaying messages just by
System.out.println...
it is giving java.lang.SecurityException
changes required to do in C:\jdk1.3\jre\lib\security\java.policy file
to make applet run from appletviewer:
following permissions added:
grant {
permission java.util.PropertyPermission "oracle.jserver.version", "read, write";
grant {
permission java.net.SocketPermission "172.25.12.46", "accept, connect, listen, resolve";
is there any setting required to make for browser?
some of u have suggested me to use servelts...
actually i am developing project for my oraganization, which will be used in intranet only and not on internet...
is it necessary to use servelts or direct db connectivity thru applet will do?
thankx

Firefox 8.0 loading MSN Homepage gives error 'problems loading page' every timebut the page eventually loads - Any solution?

Firefox 8.0 gives error message "problem loading page" when loading MSN homepage. This occurs every time.
The error is: "Firefox can't find the server at www.%3ciframe%20marginheight=%220%22%20marginwidth=%220%22%20name=%22wxbuttonframe%22%20id=%22wxbuttonframe%22%20height=%22283%22%20src=%22http.com."
Is there a solution?

I get an e-mail with go-comics and the ones I want to post links to I'll open in the browser as I read them in the e-mail so I regularly have a dozen tabs open (all the same site) by the time I'm through the e-mail. Every third or fourth page will hang up on something (connecting to or waiting for) sometimes not loading a single image, sometimes loading half the page, sometimes loading everything but the comic (because, hey, why put that as the first thing to load when you've got all these ads and crap to throw at your paying customers?).
At some point a couple of months ago I got some malware associated with trovisearch (I do not know how that got past security and java blocker but it did, probably some hidden crap in something from CNET) that somehow spoofed a page for Housecall and added five or six pieces of malware and adware. I cleaned for two days after and still can't find anything left on the computer even though I've been running scans constantly to try to make Firefox work right. I downloaded and ran a scan using Kaspersky during that time and then uninstalled it. That very well may be the cause of the post-refresh SSL issue.
I have Spybot and Malwarebytes scan logs from the time of the infection if that would help in any way. It doesn't look like there's a way to attach .xml files in this forum, though.
I can also run hijack this and copy and paste if that would help.
I'm currently running Windows Defender and rely on that and Noscript and adblocker plus to keep me isolated from most attacks (I don't have those add-ons re-installed yet). I also run Peerblock because they add malicious sites and known hacking sources (like Chinanet) to what they block as well as all the fake p2p stuff that's constantly pinging the computer. If I'm treading around in perilous waters I run Sandboxie.
Chrome is working as normal but Firefox feels like dial-up or worse right now and without adblocker I might as well be using IE.

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

Help needed in doing a first applet !

Dear People,
My goals are humble. Only to do a first applet
my MyFirstApplet.html and MyFirstApplet.java are below
If I try to open the html document in the web browser
I see a grey rectangle which indicates I think that
the applet capability has not been enabled for the browser.
Yet I did download the plugin .
thank you in advance
Stan
import javax.swing.JApplet;
import java.awt.Graphics;
public classMyFirstApplet extends JApplet
public void paint(Graphics g)
g.drawString("To climb a ladder, start at the bottom rung",20,90);
<html>
<head>
<title> MyFirstApplet
</title>
<body>
<applet code = "MyFirstApplet.class" width = 300 height = 200 >
</applet>
</body>
</html>

I would try to color the background to see if it is even getting addd to the applet.
import javax.swing.JApplet;
import java.awt.Graphics;
public classMyFirstApplet extends JApplet
punlic void init(){
this.setSize(300,300);//setst the size
this.setbackground(Color.red);//sets the color of the background
public void paint(Graphics g)
g.setForeground(Color.black);//sets the color of the text
g.drawString("To climb a ladder, start at the bottom rung",20,90);
thy that and let me know if it worked,.
steve

Select query gives error in Code inspector and extended program check

Hi,
I have a query .
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE endda EQ c_date AND
z_nca_required EQ c_yes.
This query gives me an error in Code inspector like :
Large table pa0001: No first field of table index in WHERE condition
I have one more query that gives error in extended program check
SELECT SINGLE stell ename
      INTO (g_stell, g_name)
      FROM pa0001
      WHERE pernr EQ wa_nca_tab-pernr AND
            endda EQ c_date.
The warning says:
*In "SELECT SINGLE ...", the WHERE condition for the key field "SEQNR" does not
test for equality. Therefore, the single record in question may not be unique.*
Its too urgent.
Please reply.
Regards,
Binay.

The first field is PERNR .. so if UR not giving pernr it will fetch
all the data from the said table and between the given dates ..
Check if this is your requirement ...
write the select as ...
where r_pernr is a range ...
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE pernr in r_pernr <----
             endda EQ c_date AND
             z_nca_required EQ c_yes.
As UR using select single it's expecting to use all the key
fields in the where condition ...
U can ignore this warning message

Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?

Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?

Like many others I have been reading about online I am having the same error. I tried the fix listed above and simply wasted 30 minutes of my time. I scheduled a time for Apple to call and help me through this and their solution was for me to call Microsoft for some reason?!! iTunes made me upgrade then stopped working - I really don't see how this is a Microsoft problem??
Like Darren if a solution is not found quickly I will also have to sell my phone as the only way to get videos and music on my phone is through the software that you made me upgrade, broke and won't help me fix.

When run adcfgclone.pl gives error

Hi,
when run adcfgclone.pl appTier it gives error pleas have a look steps i did and Errors file below.
Target System Database SID : dev
Target System Database Server Node [erpdev] : devdata.npfco.com
Target System Base Directory : /oracle/PROD
Target System Tools ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.2] :
Target System Web ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.3] :
Target System APPL_TOP Directory [oracle/PROD/apps/apps_st/appl] :
Target System COMMON_TOP Directory [oracle/PROD/apps/apps_st/comn] :
Target System Instance Home Directory [oracle/PROD/inst] :
Target System Root Service [enabled] :
Target System Web Entry Point Services [enabled] :
Target System Web Application Services [enabled] :
Target System Batch Processing Services [enabled] :
Target System Other Services [disabled] :
Do you want to preserve the Display [erpappl:0.0] (y/n) ? : n
Target System Display [erpdev:0.0] :
RC-00217: Warning: Configuration home directory (s_config_home) evaluates to /oracle/PROD/inst/apps/dev_erpdev. A directory with this name already exists and is not empty.
Do you want to continue (y/n) ? : y
Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 3
Checking the port pool 3
done: Port Pool 3 is free
Report file located at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
Complete port information available at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
RC-40201: Unable to connect to Database dev.
Backing up /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml to /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml.bak
Creating the new APPL_TOP Context file from :
/oracle/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml
Log file located at /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1116232223.log
Check Clone Context logfile /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1116232223.log for details.
/oracle/PROD/apps/apps_st/comn/clone/bin/adchkutl.sh: line 80: [: 5.2: integer expression expected
Running Rapid Clone with command:
perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
Running:
perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
APPS Password :
Beginning application tier Apply - Mon Nov 16 23:23:21 2009
/oracle/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /oracle/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/java:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/share.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/srvm.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier -e /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml -stage /oracle/PROD/apps/apps_st/comn/clone -showProgress
APPS Password : Log file located at /oracle/PROD/inst/apps/dev_erpdev/admin/log/ApplyAppsTier_11162323.log
/ 90% completed
RC-50004: Fatal: Error occurred in ApplyAppsTier:
StackTrace -
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFile.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V

[applmgr@erpdev bin]$ perl adcfgclone.pl appsTier
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications Rapid Clone
Version 12.0.0
adcfgclone Version 120.20.12000000.12
Enter the APPS password :
/oracle/PROD/apps/apps_st/comn/clone/bin/adchkutl.sh: line 80: [: 5.2: integer expression expected
Running:
/oracle/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -cp /oracle/PROD/apps/apps_st/comn/clone/jlib/java:/oracle/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext -e /oracle/PROD/apps/apps_st/comn/clone/bin/../context/apps/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_18493.lst -stage /oracle/PROD/apps/apps_st/comn/clone 2> /tmp/adcfgclone_18493.err; echo $? > /tmp/adcfgclone_18493.res
Log file located at /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1117063328.log
Provide the values required for creation of the new APPL_TOP Context file.
Target System Hostname (virtual or normal) [erpdev] :
Target System Database SID : dev
Target System Database Server Node [erpdev] : devdata
Target System Base Directory : /oracle/PROD
Target System Tools ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.2] :
Target System Web ORACLE_HOME Directory [oracle/PROD/apps/tech_st/10.1.3] :
Target System APPL_TOP Directory [oracle/PROD/apps/apps_st/appl] :
Target System COMMON_TOP Directory [oracle/PROD/apps/apps_st/comn] :
Target System Instance Home Directory [oracle/PROD/inst] :
Target System Root Service [enabled] :
Target System Web Entry Point Services [enabled] :
Target System Web Application Services [enabled] :
Target System Batch Processing Services [enabled] :
Target System Other Services [disabled] :
Do you want to preserve the Display [erpappl:0.0] (y/n) ? : n
Target System Display [erpdev:0.0] :
RC-00217: Warning: Configuration home directory (s_config_home) evaluates to /oracle/PROD/inst/apps/dev_erpdev. A directory with this name already exists and is not empty.
Do you want to continue (y/n) ? : y
Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 51
Checking the port pool 51
done: Port Pool 51 is free
Report file located at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
Complete port information available at /oracle/PROD/inst/apps/dev_erpdev/temp/portpool.lst
RC-40201: Unable to connect to Database dev.
Backing up /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml to /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml4.bak
Creating the new APPL_TOP Context file from :
/oracle/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
The new APPL_TOP context file has been created :
/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml
Log file located at /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1117063328.log
Check Clone Context logfile /oracle/PROD/apps/apps_st/comn/clone/bin/CloneContext_1117063328.log for details.
/oracle/PROD/apps/apps_st/comn/clone/bin/adchkutl.sh: line 80: [: 5.2: integer expression expected
Running Rapid Clone with command:
perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
Running:
perl /oracle/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/oracle/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/oracle/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml showProgress contextValidated=true
APPS Password :
Beginning application tier Apply - Tue Nov 17 06:34:12 2009
/oracle/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /oracle/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/java:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/share.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/oui/srvm.jar:/oracle/PROD/apps/apps_st/comn/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier -e /oracle/PROD/inst/apps/dev_erpdev/appl/admin/dev_erpdev.xml -stage /oracle/PROD/apps/apps_st/comn/clone -showProgress
APPS Password : Log file located at /oracle/PROD/inst/apps/dev_erpdev/admin/log/ApplyAppsTier_11170634.log
\ 89% completed
RC-50004: Fatal: Error occurred in ApplyAppsTier:
StackTrace -
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodError: oracle.apps.ad.autoconfig.InstantiateFile.writeReport(Ljava/util/Vector;Loracle/apps/ad/util/LogFile;I)V
at oracle.apps.ad.clone.ApplyApplTop.checkAutoConfigErr(ApplyApplTop.java:590)
at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:558)
at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
... 6 more

Premiere Pro stops rendering and gives error message when encounters "RGB Color Corrector"

Premiere Pro (and also Encore) stops rendering and gives error message when it encounters a clip containing the "RGB Color Corrector" in any clip. It will process clips without RGBCC, but will stop when it gets to one with RGBCC activavted. PP will render clips if other effects, such as "Fast Color Corrector", "Color Balance (HLS)", and "Three-Way Color Corrector" are selected. However, these do not have the capabilities that The other color correctors will not do what RGB color corrector does, so I need to have this working to finish a large product that is due to the client. Please help me..... I am not using the Creative Cloud version, and can't find either a download for the new update from 2013, or a phone number to talk to anyone.

Using a Win7 computer with 2.8 quad core processor, 24 gig of ram, Nvidia Quadro 5000 video card. Don't think I have any plugins. I looked at one a while back for cleaning up grainy video, but I am not sure I paid for that. Think I deleted it.
Incidentally, someone named Jim on another part of the forum mentioned that this problem has been fixed in the CC version of the program. I am using the non-CC version because I am 68 years old and only do seminars and documentation video. Don't need so many bells and whistles, and definitely don't need learning curves every few weeks. CS6.0.3 works fine for me. By the way, someone else said that maybe version 6.0.1 might work better and I should revert to that. Not sure if it is the version i have on the disk upgrade to 5.5 that I purchased in December.
As it stands now, I have 7.5 hours of a seminar that is ready to go out the door. If there is an upgrade I can get from Adobe, maybe you can tell me about it. If I have a setting incorrect in the video output format, maybe I can change that. So far it just happens with clips in my video that have RGB color correction.
Rick

ITunes gives error code -54 when sync with my iphone 5

iTunes gives error code (-54) when i try to sync with my iphone5

I am having the same issue. Since updating to iTunes 11 my iPhone 5 will no longer wirelessly sync. I am operating the latest version of Mountain Lion on a two month old Macbook Pro. When I plug in the USB I go through the steps of making sure the box is clicked to Wireslly sync, but after a few minutes of un-plugging the cord my phone dissapears from my devices. It tries to locate it, but cannot.
Furthermore, when I launched iTunes 11 for the first time my phone was synced, but since I accidenttly hit the eject button in the top right, this button has yet to come back. Even when the iPhone is linked via USB. Am I Crazy, stupid, or is this a bug?
BTW, how did MrTrav15 have this problem on 10/17 a month-and-a-half before the launching of iTunes 11?

Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
   [ Name] Microsoft-Windows-Kernel-Power
   [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   EventID 41
   Version 2
   Level 1
   Task 63
   Opcode 0
   Keywords 0x8000000000000002
- TimeCreated
   [ SystemTime] 2012-02-01T00:02:48.677610900Z
   EventRecordID 8270
   Correlation
- Execution
   [ ProcessID] 4
   [ ThreadID] 8
   Channel System
   Computer LR8K6TLC.cntr.thrivent.corp
- Security
   [ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.

We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you.

Import through CHARM gives ERROR that dependecies of predecessaor

Import through CHARM gives ERROR that dependecies of predecessaor transport requests exists and the import fails through CHARM in solution manager.
we are having many occurrences that are being reported where ChaRM is not capable of releasing a transport because it is asking for the dependencies to be released first, even though the dependencies are already in Production.
let us know if we can change the configuration in CHARM or in the Solman Projects so that when we import the request we dont get this dependencies again

Hi Michael,
If the objects are locked under another transport request which are not released, only then you will get an Error saying Objects are locked by Request.
1. You either release the Requests which holds those objects and then try to release the Charm request.
OR
2. Check under which tranports requests does these objects are locked and then goto t.code se03 and Unlock those objects and then try to release the Request thorugh Charm
Regards,
Lohith

Creating production order it gives error

Dear Sir,
I am using PP01 order type for production order we have two plant and i hAve maintained NUMBER RANGE in CO82 and also in OPJH. but when i create production order in CO01order type PP01 for one plant 1000 it gives ERROR - number range not defined same i am creating for another plant 1020 it create order production order.
Please guide me where i mainatined number range of production order for indiviual plant

Check your order type has been assigned to plant and also validate the number ranges as well.
Mahee

My first Applet gives error (been thru tutorial)

Similar Messages

Maybe you are looking for