Import through CHARM gives ERROR that dependecies of predecessaor

Import through CHARM gives ERROR that dependecies of predecessaor transport requests exists and the import fails through CHARM in solution manager.
we are having many occurrences that are being reported where ChaRM is not capable of releasing a transport because it is asking for the dependencies to be released first, even though the dependencies are already in Production.
let us know if we can change the configuration in CHARM or in the Solman Projects so that when we import the request we dont get this dependencies again

Hi Michael,
If the objects are locked under another transport request which are not released, only then you will get an Error saying Objects are locked by Request.
1. You either release the Requests which holds those objects and then try to release the Charm request.
OR
2. Check under which tranports requests does these objects are locked and then goto t.code se03 and Unlock those objects and then try to release the Request thorugh Charm
Regards,
Lohith

Similar Messages

Whenever i put my iphone for restoration itunes gives error that disk is full what do i do?

whenever i put my iphone for restoration itunes gives error that disk is full what do i do?

Is your PC disk full?

Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

Can't instal firefox 4, Gives error that my comupter needs to reboot to uninstall an older vesion. But I have uninstalled the other version and have rebooted 4 times now.

I have a similar problem installed firefox 4.0 update (x86 en-us) am told to reboot all the time. I cannot uninstall and it has also messed up my email attachments which I cannot now open except if they are microsot office.

Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Standard PML Message XSD Import in PI Gives Error ::AII -PI-ECC Integration

Hi Experts,
We are currently integrating the AII system with ECC using PI as a middleware. We are trying to post one type of message in AII which will check the tag event in that message and do the required action in AII.
Now point is AII team is expecting a PML mesage as below -
<?xml version="1.0" encoding="utf-8" ?>
- <pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 ./PML/SchemaFiles/Interchange/PMLCore.xsd">
<pmluid:ID xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" />
- <pmlcore:Observation>
<pmlcore:DateTime>2012-02-08T16:41:26.760</pmlcore:DateTime>
<pmlcore:Command>TAG_DECOM_BATCH</pmlcore:Command>
- <pmlcore:Data>
- <pmlcore:XML>
<PRODUCT>TRN_PROD_13</PRODUCT>
<BATCH_ID>ATRN_PROD13B</BATCH_ID>
<LogicalDeviceID>DG_AMBOISE_LINE_1</LogicalDeviceID>
</pmlcore:XML>
</pmlcore:Data>
</pmlcore:Observation>
</pmlcore:Sensor>
And they have also provided the standard PML message xsd to us but when we are importing it in to XI it is giving the below error -
Change list activated; note the following information
Check result for External Definition: PML | urn:sugata_PI_LFTP: Document check found errors
Cause: Loaded document contains incorrect XSD definition
Name of '/schema/element("XML")' starts with 'xml'
as we can see in the above XML there is a tag called <pmlcore:XML> if we change this to something like <pmlcore:ABC>
it is imported successfully and we can see the message structure in the XSD also.
As PML XSDs are standard so the AII team is also not changing the same as mentioned above.
Please advise how can we import this XSD in PI with tag name XML?
Another question, which is very confusing to us - is PI able to send PML message as mentioned above? or PI will send a simple XML as below -
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Batch_DECOMM xmlns:ns0="http://pfizer.com/serialization/batch_expiration">
- <Observation>
<DateTime>2012/02/08</DateTime>
<Command>TAG_DECOM_BATCH</Command>
- <Data>
- <XML>
<PRODUCT>F000000211</PRODUCT>
<BATCH_ID>00000TESTAII001</BATCH_ID>
<DOCUMENT_NO>0000000004811027</DOCUMENT_NO>
<LogicalDeviceID>DG_GLOBAL</LogicalDeviceID>
</XML>
</Data>
</Observation>
</ns0:MT_Batch_DECOMM>
and AII will convert it to PML message using some PML engine or PML converter in AII?
Request your urgent help in this regard. Any help will be appreciated and rewarded.
The standard XSDs we are using are - PMLCore.xsd and Identifier.xsd , first one is referring the second one.
Thanks
Sugata B Majumder

Hi Mark,
Thanks for the input. I have also thought the same using XSLT or JAVA as in PI7.1 the tag XML is not allowed in xsd. But I got surprise when I have created a data type having a field name as XML and xsd for this has been successfully generated.
Any ways I have handled the entire structure target payload creation in XSLT. here is the XSLT code I have written-
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
   <xsl:comment>
   This XSLT Mapping is designed to handle the PML structure required by SAP AII system.This XSL Transformation will create PML Standard Message in SAP PI.
   Author: majums15
</xsl:comment>
<pmlcore:Sensor xmlns:pmlcore="urn:autoid:specification:interchange:PMLCore:xml:schema:1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:autoid:specification:interchange:PMLCore:xml:schema:1 ./PML/SchemaFiles/Interchange/PMLCore.xsd">
<pmluid:ID xmlns:pmluid="urn:autoid:specification:universal:Identifier:xml:schema:1" />
      <pmlcore:Observation>
      <pmlcore:DateTime>
     <xsl:value-of select="substring(//EDI_DC40/CREDAT,1,4 )" />
<xsl:text>-</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CREDAT,5,2 )" />
<xsl:text>-</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CREDAT,7,2 )" />
<xsl:text>T</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CRETIM,1,2)" />
<xsl:text>:</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CRETIM,3,2)" />
<xsl:text>:</xsl:text>
<xsl:value-of select="substring(//EDI_DC40/CRETIM,5,2)" />
</pmlcore:DateTime>
        <pmlcore:Command>TAG_DECOM_BATCH</pmlcore:Command>
        <pmlcore:Data>
          <pmlcore:XML>
           <xsl:element name="PRODUCT">
           <xsl:value-of select="//ZBATMAS/IDOC/ZE1BATMAS/MATNR" />
            </xsl:element>
             <xsl:element name="BATCH_ID">
             <xsl:value-of select="//ZBATMAS/IDOC/ZE1BATMAS/LICHA" />
              </xsl:element>
            <xsl:element name="LogicalDeviceID">
             <xsl:text>DG_GLOBAL</xsl:text>
              </xsl:element>
             <xsl:element name="DOCUMENT_NO">
             <xsl:value-of select="//ZBATMAS/IDOC/EDI_DC40/DOCNUM" />
              </xsl:element>
            </pmlcore:XML>
        </pmlcore:Data>
      </pmlcore:Observation>
    </pmlcore:Sensor>
</xsl:template>
</xsl:stylesheet>
Thanks
Sugata B

Integrating SAP UI5 application in Portal through LPD_Cust gives error

Hi Team,
In our scenario we are calling sap UI5 application in portal through LPD_Cust . We receive error SAP UI5 mobile is not supported in your browser . When we call same application through portal directly it opens properly( In both cases we are using same page and iView).
We have set the property of iview in portal as open in header less window in standard mode.But in Lpd_cust we don't have option of open in standard window.
Is there any work around available which launches application properly.

I think you are experiencing problems thru the document mode of your browser.
The Quirks of Browser Rendering
1) If you are running ldp_cust, you could open the page properties in a new window.
2) set the document mode for the portal: Ajax Framework Page - Portal - SAP Library
iView: Browser Document Mode ( com.sap.portal.BrowserDocumentMode )
This iView adds an X-UA-Compatible header into the framework page that affects the Browser Mode and the Document Mode in Microsoft Internet Explorer. The default value is IE=EmulateIE7 that sets the Browser Mode in Microsoft Internet Explorer to IE7 Compatibility View and the Document Mode toQuirks .
If you are supporting IE9 standards mode, use IE=Edge. Remember that ALL applications in your portal need to support this!
3) See if the problem is the document mode. When you open the SAP UI5 application, press F12 and change the browser mode to Standards.

Because I have deleted photos, Iphoto gives error that it cannot find the photos

Because I have deleted photos in my albums, Iphoto gives an error for each file saying it cannot find the file. Is there a way to stop it from looking for deleted pics?

Are you running a "referenced" library?
If you are did you delete the source photo via the Finder and not from in iPhoto? It sounds as if you did. If that's the case then drag the thumbnail to the Apple Trash Bin and empty it. That will stop the error message.
If you're running a managed library and deleted the original file via the Finder that's the reason. The same fix applies.
WARNING: Never delete a photo that's in the iPhoto library via the Finder. That damages/corrupts the library as you've experienced.
OT

Import from scanner give error message "This file already exists in this catalogue"

I can import from the scanner occasionally, but often times get this error message. " this file already exists in this catalogue" and the scanned picture is discarded.
I see others have had it as well, but no solutions were posted. I'm running Photoshop elements 11 with all current updates.

Thanks for the reply. My Image wasn't in a version set however. I scanned a new photo which was successsful. I then scanned a second photo different from the first, which failed. I think possibly the software for my HP scanner is at fault, since it always names the scans as image1.jpg. It doesn't give an option to increment successive scans to a different name which probably caused the problem.

Package/Import statements - javac gives errors while Netbeans does not

I do not know why, but when I compile/run my code with the statements
package TavisProject;
import TavisProject.LabelAndButtonFrame;
in Netbeans, everything works properly as it should. However, if I try to compile the SAME files with javac at the cmd line, I get the errors:
C:\FinalProject\src\TavisProject>javac Main.java
Main.java:22: cannot find symbol
symbol : class LabelAndButtonFrame
location: class TavisProject.Main
LabelAndButtonFrame labelAndButtonFrame = new LabelAndButtonFram
e(); // Instantiates/calls labelAndButtonFrame
^
Main.java:22: cannot find symbol
symbol : class LabelAndButtonFrame
location: class TavisProject.Main
LabelAndButtonFrame labelAndButtonFrame = new LabelAndButtonFram
e(); // Instantiates/calls labelAndButtonFrame
^
2 errors
Also, if you comment out the statements in both files, everything compiles fine with javac. Also, please note that LabelAndButtonFrame.java is in the same folder as Main.java.
I'm trying to get a batch file to work properly that will compile/create javadoc, but I can't get it to work without figuring
out what the deal is with those package/import statments causing problems.
Thanks,
Tavis
The main code is as follows:
package TavisProject;
import TavisProject.LabelAndButtonFrame;
import javax.swing.JFrame;
* @author Tavis Curry
* @version 1.0
* This Class is called MainMethod. It instantiates/calls labelAndButtonFrame.
* Uses javax.swing.JFrame
public class Main
       * Main method
          * This method will call labeAndButtonFrame, set the default close op,
          * set the size of the jframe, and set the jframe to visible
        public static void main(String args[]){
                LabelAndButtonFrame labelAndButtonFrame = new LabelAndButtonFrame(); // Instantiates/calls labelAndButtonFrame
          labelAndButtonFrame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE ); // LabelAndButtonFrame will Exit when the X-button is clicked
                labelAndButtonFrame.setSize( 550, 70 ); // Sets frame size - width by height
                labelAndButtonFrame.setVisible(true); // Shows LabelAndButtonFrame
     } // End main method
} // End class LabelAndButtonFrameMessage was edited by:
TC10284

Thanks much. That worked.
I had EVERYTHING working except this little thing.
I'm a little confused on why it makes a difference if
I set this however. Why can the compiler not find the
files if they're in the same dir?Because it doesn't find files - it finds classes.
The fact that it can use directories to organize the hierarchy is misleading. That is an easy convention but it doesn't alter the fact that it uses the class path itself along with other rules to find classes (not files.)
>
Also, now that I have to set the classpath, how would
I get this to work inside a batch file that uses env.
variables to locate the base project?
Both the java compiler and the java vm tools support a command line option which allows you to fully specify the class path.

Cs5 gives error that camera type is not supported when trying to open raw files but worked fine earlier

Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
THis is what I get when trying to open files. Half my session opened fine then all of a sudden i get this error. Won't open in LR5 Either. HELP! using LR5 AND CS5 ON A IMAC with a canon 5dm3. everyhting is up to date as i I checked..

I will try that now. It reads that it is up to date but I will reinstall. The session after it loaded just fine on the same card

SFC /scannow gives error that certain files cannot be repaired - utilman.exe hash does not match amoung others

https://drive.google.com/file/d/0B6E6-0H82S_-YjlkVlk1SkQ5Qk0/edit?usp=sharing
The CBS log is here

There's only the one error in the report... which is in the wrong forum, but I'll address it before moving the thread to a more appropriate forum.
Here's Your error message...
Line 12285: 2014-04-11 17:46:51, Info CSI 0000031d [SR] Repairing 1 components
Line 12286: 2014-04-11 17:46:51, Info CSI 0000031e [SR] Beginning Verify and Repair transaction
Line 12289: 2014-04-11 17:46:51, Info CSI 00000320 [SR] Cannot repair member file [l:22{11}]"Utilman.exe" of Microsoft-Windows-UtilMan, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
I've uploaded a file -
wtraa.zip - to my OneDrive at
Noel's OneDrive
Please download and save it.
Right-click on the saved file and select
Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping
F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.
Pick the option to use a Command Prompt
At the prompt type
DIR C:\wtraa
hit the enter key - if you get a 'Not Found' error try
DIR D:\wtraa
or
DIR E:\wtraa
The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...
XCOPY <drive>:\wtraa <drive>:\windows\winsxs /y /i /s /v /h
(e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )
run the command (it should take almost no time) and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.
Now run
SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply
Noel Paton | Nil Carborundum Illegitemi
CrashFixPC |
The Three-toed Sloth
No - I do not work for Microsoft, or any of its contractors.

Spybot causes firefox to give errors that it can't access some sites, even though other browsers still can; I reported the error to you before I knew.

Just letting you know I found the problem. I did not see that that fix was already reported anywhere.

Using the Firefox immunize with Spybot can cause problems. It dumps hundreds of block items into the permissions and really slows things down.

Mac OSX gives error while importing photos - "Kernel Panic"

I upgraded my mac, reinstalled OSX and Lightroom , tried to import photos, mac gives error (called Kennel Panic) and restarts abandoning import. Applecare support suspect Lightroom reinstall issue. Thanks

If you want PRE to be responsive you should follow Steves' recommendation to resize to 1000x750 (SD).
At the technical level I think the maximum allowable dimensions are 4096 x 4096 - but PRE will struggle with pictures that size.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Can't sync songs after 14 gb, itunes gives errors!! Please help!

Hello to everyone, I'm using an Ipod classic, 6th generations, 2009 and i am using itunes with windows 8.1. After the new update of Itunes, i couldn't sync new songs to my Ipod, Itunes shows a lot of erros like 50, 53, 13039. I read and tried a lot of solutions to solve it, i uninstall the Itunes and reinstalled the latest version, it didn't help, i restore, reboot my ipod it didn't help, i deleted my whole library, i tried different cables to plug in, i used all of my usb slots, none of them has helped me!! I'm so close to throw my Ipod out!! I need some help and advice. I could be allowed to sync aprox. 14 gb of songs, but after the remaining space comes to 130 gb (or some other equal space) it starts to give errors that i mentioned above. The only thing that i didn't give a try is trying syncing my ipod with another pc. Is there anybody to help me? What can i do? I guess the problem is with my ipod's harddisk, i hope it is not, i don't want to pay money to get it repaired! All kind of helps will be appreciated! Have a nice day!

Thank you, but I did that. I de-selected and then re-selected but because the 13019 still won't allow the sync, all it did was completely delete everything on my Ipod! I now have no songs on my Ipod when at least before, I had all my songs but the new 12 songs! I'm freaking!

OOTB workflow gives error when user rejects in the document in publishing a major version.

Hi All,
I am using OOTB workflow with little customization with following configuration
1. Allow content approval enabled
2. Configure a workflow with following general settings true
3. Start workflow on publish of Major version only is enabled
4. workflow has following configuration enabled.
Now, when user start publishing of major version and Starts the workflow. workflow starts without any problem.
But as and when the user rejects the document it is rejected with Reject status with "Approval Status" as well as workflow status which is expected.(This is correct )
But when i look at the workflow history i can see at last line there is an Error with
An error has occurred in In [Workflow Name].
Now when user check out and check in item again and try to publish with Major version again. it gives errors that the previous version is still running.
I have trace a lot and also test with original OOTB workflow itself. it is behaving the same.
As per my findings there is problem in "Completion condition of this task process" the end task process is not being executed correctly.
I tried to end the task process with End the task process action but it is still not working.
I need some help in this issue as users are facing problems in case of rejection. I hope some one has the solution for the same.
Two things i have noticed are
1. My MS office 2010 professional plus is expired as i was using trial version
2. I have made stop inheriting tasks permission and remove all default groups as i have settings in workflow "Only allow task reception and process owner to read and edit workflow task"
3. Earlier i had also installed "Sharepoint 2010 April 2012 updates". i had also observed that (installing Sharepoint 2010 April 2012 updates) before that if user has selected "Automatically rejects the document if any participant rejected". it ends
with "rejected" status. At present it remains in inprogress and not stops with rejected status.
Can any one give me a hint what should be the problem ? Is it a problem with latest Sharepoint 2010 April 2012 updates ?
Thanks,
S. M. MANIYAR

I have done following testing.
1. The server in which i have not installed sharepoint 2010 April 2012 updates the above scenario is working fine without any problem
2. I have also observed following logs of error in server where April 2012 updates is installed.
8/28/2012 03:51:41.33 w3wp.exe (0x0F08)                       0x0A00 SharePoint Foundation
Workflow Infrastructure       88xr Unexpected WinWF Internal Error, terminating workflow Id# 8bf7fef1-c92e-4b22-a16f-480425d3adc6
08/28/2012 03:51:41.33 w3wp.exe (0x0F08)                       0x0A00 SharePoint Foundation
Workflow Infrastructure       98d4 Unexpected System.InvalidOperationException:
CompositeActivity cannot transition to 'Closed' status when there are active child context still exist for child activity.     at System.Workflow.ComponentModel.Activity.MarkClosed()     at System.Workflow.ComponentModel.ActivityExecutionContext.CloseActivity()
at Microsoft.Office.Workflow.Actions.OfficeTask.FinalClose(Object sender, EventArgs eventArgs)     at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
Following are last two lines of workflow history.
S. M. MANIYAR

Import through CHARM gives ERROR that dependecies of predecessaor

Similar Messages

Maybe you are looking for