My form application does not find my report (10.2.1)
where do i have to tell to oracle forms to look for my reports ? default.env ? , where do i set my oracle reports path ?.
can i generate rep files for runnign from forms insted of rdf ?
thanks a lot.
No, my bad. It should be in your ENV file but I think Forms has actually stopped reading REPORTS_PATH so try putting your rdf in your FORMS_PATH instead (ie where your fmx's are). Or try setting REPORTS_PATH in your registry instead. I'm not in my office and cant remember exactly...
Message was edited by:
kndwds
Similar Messages
-
Iphone stolen - Find my iphone application does not find my phone
Dear all,
yesterday evening my iphone 5 was probably stolen.
After I discovered that (approx. 30 to 50 min. after it was stolen), I tried to call my phone, but the phone was already turned off. I went home immediatly, logged-in into icloud and started "find my iphone app" and requested "erase" as soon as the phone goes online somewhere.
The problem I have now, is that several times I logged into that "find my iphone app" in iCloud in my brower, sometimes I received the message that "find my iphone app" cannot start. I did send report to Apple already.
I do have an old iphone 4 as well, which is also connected to my cloud. That phone is online and right in front of me.
When I start "find my iphone app" the phone cannot be found… it says the device is "offline". But it's not.
So I'm afraid now that the "erase" request for my iPhone 5 is useless and does not work.
On that phone is really sensitive data from work, so it must be erased.
Anyone knows what I can do now?
Thanks!
DanielIt sounds like you are doing everything you can given the circumstances. Heres a link that may help. I don't think it has any new information but to make sure you report it to your local law enforcement.
Reporting a lost or stolen Apple product -
From the Web application does not display the report...
Hello,
I have a Web application in VS 2010 (NET 4.0) running reports in VS 2003 (NET 1.1) and CR XI. What should I consider for the reports to run well? When setting up the basics of the folder where the reports are in IIS 7.5, item I keep in the Application Pool: NET 1.1, but when in the same IIS server I click on Browse *: 80, I generated the following error: HTTP Error 500.19 - Internal Server Error
The requested page can not be accessed Because the related configuration data for the page is invalid.
I can do, thanks.Reports are made in VS 2003 (. NET 1.1) and CR XI using a framework. This framework is placed in the web server (Windows 2008 Server R2) and called from VS 2010.
Sorry, I'm still having problem understanding this.
Only CRVS2010 will work with VS2010. The reports can be created in any version of CR you want, but to load the reports in VS2010, you need CRVS2010, create a project in VS2010, then deploy the project and the CRVS2010 runtime(?).
E.g.;
1) Create report using CR XI
2) Install CRVS2010 on a computer that has VS2010
3) Create a project using CRVS2010 in VS 2010 - can use any framework you want
4) Deploy VS2010 project
5) Install CRVS2010 runtime
- Ludek -
The form filling application does not seem to be working
The automatic form filling does not appear to be working
You have or had an extension installed (MegaUpload toolbar) that has changed the user agent from Firefox/3.6.4 to Firefox/2.0.0.4.
You can see the Firefox version at the top and the user agent at bottom of the "Help > About" window (Mac: Firefox > About Mozilla Firefox).
You can check the '''general.useragent''' prefs on the '''about:config''' page.
You can open the ''about:config'' page via the location bar, just like you open a website.
Filter: '''general.useragent'''
If ''general.useragent'' prefs are bold (user set) then you can right-click that pref and choose ''Reset''.
See [[Web sites or add-ons incorrectly report incompatible browser]] and [[Finding your Firefox version]]
See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
To see all the History and Cookie options, select: Firefox > Preferences > Privacy > History: Firefox will: "Use custom settings for history" - See [[Options window - Privacy panel]]
Firefox > Preferences > Privacy > History: "Remember search and form history"
See also [[Form autocomplete]] -
Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks
*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc. -
Compiling fmb module in Form builder does not change the fmx file
Hi,
I am using Oracle Forms Builder version 10.1.2.0.2 To edit 10g2 forms.
In the last month, it happened twice that an fmb file I edited in the forms builder did not change the fmx aftrer compilation.
namely, when I opened the fmx file in the application, I didn't see the changes, but they were present in the fmb form opened in the Form Builder.
Usually when we have the fmx file open in the application, the form builder won't let me compile it - showing the following error:
FRM-30087: Unable to create form file
When this error happens and the changes are not reflected, this error message doesn't appear even though the fmx file is open in the application.
I tried deleting the fmx file, and then opening it in the application to see if there is another copy of it.
The application gave an error 40010 - can't read form.
When I recompiled the file, the fmb didn't show any changes either, even though the file was created again in the file system.
I could not find a way to consistently reproduce this problem.
Did you ever encounter such a problem?
I noticed the edit -> preferences -> general menu has the option to "save befor building".
Does it mean the Form Builder keeps a cached copy of the fmb in memory, and when this error happens it compiles the original file system fmb file rather than the cached memory copy with the changes?
Thanks,
Eyal Azran
Configuration Management Engineer - IsracardHey Craig,
Thank you for your response.
I verified the version of the forms on the Application Server and they are the same.
This problem is quite tricky to reproduce, it happens once every few months!
(we have about 10 developers, who are developing and testing on multiple servers - so far two of the servers showed this issue)
I've determined that the reason this happens is that:
1. The compiled fmx is vied in the application.
** for some reason, the frmweb.exe process on the server does not terminate properly **
2. The developer compiles the form again in Form Builder
3. The Form Builder does not detect that the form is open in the mal-terminated process
There usually is an error message here saying the fmx module is locked - this error happens because this message is not displayed.
I will attach an image of the process monitoring tool we use ( ProceXP ) showing the ghost process that locks the fmx module.
<edit>oops, I guess I can't attach the image- I can e-mail it if you'd like</edit>
If anyone has an idea for a solution, this will help immensely.
Eyal
Edited by: Hey_Al on 06:04 06/05/2010 -
Sometimes JavaFX form (BorderPane) does not show correctly
We have a problem with a JavaFX application running on Java 7. Sometimes a form (BorderPane) does not show correctly – it seems to be transparent (i.e. content previously shown at the same place is still visible). Controls seem to be present and respond to events – e.g. we can close the form by blindly clicking the appropriate button. Once the issue happens it is persistent, i.e. next time we open the form, it behaves the same.
We have no reproducible scenario leading to the issue. It just happens here and there – we have not been able to identify any pattern yet.
Additional information:
the form (BorderPane) is loaded during application start-up but it is not shown initially,
to show the form we remove previous contents from a StackPane and add the form instead,
to hide the form we do the reverse.
Do you have any ideas how to diagnose the problem? Where to look first? What kind of diagnostic code could we put in the application that would help us?I am unaware of any such issue being reported previously.
Without a reproducible test case, you are unlikely to get much assistance.
Other than the creation of a minimal test case which reproduces the issue, I could not even advise how you might go about diagnosing and fixing your issue.
There were many bug fixes implemented for Java 8.
I advise you to upgrade your test environment to the latest Java early access release (currently Java 8u40) and test to verify if your issue replicates in that version.
If the issue still reproduces, create a bug report which includes your test case and full environment details. -
HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.
Mail application does not work after upgrade to Mavericks.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful. -
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc
My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help
You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
http://support.apple.com/kb/TS1538 -
Software does not find the Database server
Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth -
The application does not use the screen and run in the background
Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
private SSGameCanvas gameCanvas ;
private Command exitCommand ;
private Player player = null;
public void startApp() {
try {
// create new game thread
gameCanvas = new SSGameCanvas();
gameCanvas.start(); // start game thread
exitCommand = new Command("Exit",Command.EXIT,1);
gameCanvas.addCommand(exitCommand);
gameCanvas.setCommandListener(this);
Display.getDisplay(this).setCurrent(gameCanvas);
catch (java.io.IOException e)
e.printStackTrace();
try {
// start sounds
InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
player = Manager.createPlayer(in,"audio/x-wav");
player.setLoopCount(1);
player.start();
catch (MediaException ex)
ex.printStackTrace();
catch (IOException ex)
ex.printStackTrace();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
if (player != null) {
player.close();
System.gc();
public void commandAction(Command command, Displayable displayable) {
if (command == exitCommand)
destroyApp(true);
notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
protected GameManager gameManager;
protected boolean running;
private int tick=0;
private static int WIDTH;
private static int HEIGHT;
private int mDelay = 20;
Form mainForm;
Display display;
//private int MaxTime;
public SSGameCanvas() throws IOException{
super(true);
gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
public void start() {
this.running = true;
Thread t = new Thread(this);
t.start();
public void stop() {
running = false;
public void render(Graphics g) {
WIDTH = getWidth();
HEIGHT = getHeight();
// Clear the Canvas.
g.setColor(0, 0, 50);
g.fillRect(0,0,WIDTH-1,HEIGHT-1);
// draw border
g.setColor(200,0,0);
g.drawRect(0,0,WIDTH-1,HEIGHT-1);
// draw game canvas
gameManager.paint(g);
public void run() {
while (running) {
// draw graphics
render(getGraphics());
// advance to next graphics
advance(tick++);
// display
flushGraphics();
try { Thread.sleep(mDelay); }
catch (InterruptedException ie) {}
public void advance(int ticks) {
// advance to next game canvas
gameManager.advance(ticks);
this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PMHi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj -
View Paycheck Stub Error: (Form xyz does not exist)
Hi Portal Knowledgeable ones,
I am running EP 6.0 SP 13. My SAP target is ECC 5.0.
I have a problem in the ESS application. When I attempt to view the paycheck stub for any employee, the portal returns the error:
<b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZCHK does not exist</b>
Form ZCHK is our custom paystub form.
Thanks,
Kevin
<i></i>Had to include form via IMG.
-
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br /> -
Deployed application does not contain javascript files
Hello,
I am a unexperienced user of the BPM Studio. When I start my application in Oracle BPM my application does not contain the javascript files. It is quite weird, because the path to the .js files is proper - the application works on other computers. I have observed several weird things:
- when I lookup the application in Firebug, when I try to lookup the source of the .js files, firebug console presents something like this (i deleted most of the html so that it is easy to read):
<html><head><title>Apache Tomcat/5.5.15 - Error report</title>
<body>HTTP Status 404 - /workspace//webRoot/webResources/js/jquery-1.4.2.min.js
Status report message /workspace//webRoot/webResources/js/jquery-1.4.2.min.js
The requested resource (/workspace//webRoot/webResources/js/jquery-1.4.2.min.js) is not available.
<h3>Apache Tomcat/5.5.15</h3></body></html>- as i said - the application works just fine on other computers, without having to edit the path to the .js files
- the application doesn't deploy the application (at least I think it does not) in the OraBPMStudioHome - the application is in the following folder:
C:\Users\<username>\AppData\Local\VirtualStore\Program Files\OraBPMStudioHome\webapps\workspace\webRoot
I am using OracleBPM Studio 10gR3, my system is Windows 7 Proffessional 64bit. Could the fact, that my system is 64 bit, cause the error?
I haven't changed anything in the web.xml, workspace.properties files.
It looks as if the server didn't include my js files. What may be causing this? I tried to locate the folder where the Tomcat Server deployes the application, and copying the js files where they should be manually, but that didn't work out well - the web application still does not see them.
By the way, the double // slashes in the path to the .js file are fine on other computers, but is that proper?
My application uses other scripts, not only jQuery, so changing the link to the jQuery file, won't work.
I'd be very happy for any solution, thanks in advance!
Chris Mejka
Edited by: 789731 on 2010-08-20 01:20Nope, that's not the case; all the imports are handled by the <fuego:webResources /> tag, like this:
<script type="text/javascript" src="<fuego:webResources relativePath='js/jquery-1.4.2.min.js'/>"></script>If that helps, the folder structure, with the .js files is as follows: ../webRoot/webResources/js/ ....
As I said before - none of my colleagues, who use this application, has this problem, the application runs fine on other computers. The only (or at least that's what I think) difference, is that I use a 64 bit OS... Maybe that's the problem? Or maybe something is wrong in one of my BPM configuration files?
Edited by: 789731 on 2010-08-20 02:29
Edited by: 789731 on 2010-08-20 04:42 -
30:6519:Target application does not exist.
Hello,
I want to delete an existing application, but I'm getting the following error "Target application does not exist" and I can't delete neither deploy.
Do you know what I can do to resolve this issue?
Regards,
RodrigoHello Tod,
I'm talking about EPMA, version 11.1.1.3.
I can see the application in EAS and in the Planning Database.
In the log I'm get the following errors:
java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale pt_PT
java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale pt_PT
java.lang.Exception: APP_NONE_SELECTED
at HspLogOn.Handle(Unknown Source)
at HspLogOn.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
As aditional information this happened after I migrate the application artifcats.
Your help is much appreciated. I don't know what to do.
Regards,
Rodrigo
Maybe you are looking for
-
Controlling Business transaction field in COSS and COSP table
Hi all, I am trying to understand the idea of the field business transaction in tables COSS and COSP (where as much as I understood are the line items in CO - please corect me if I am wrong). It seems logically that this field is connected somehow to
-
Fileopen Initialization Failure(2)
I receently updated both Acrobat 8 standard and Adobe Reader 9 up to their latest versions. Whenever I open a PDF with either product I get the following message Fileopen Initialization Failure(2) you will not be able to open protected documents. I
-
Help?
-
Can anyone tell me how to remove JS:Psyme trojan infection? Or where can I get the information? Thanks
-
Why does it take so long to install updates for MacBook Pro?
My Dell Desktop never took so long to install system updates or updates to my iPod. I thought since this is a Mac, that updating my iPod would be fairly quick...12 hours is unacceptable. Any thoughts would be greatly appreciated.