View Paycheck Stub Error: (Form xyz does not exist)
Hi Portal Knowledgeable ones,
I am running EP 6.0 SP 13. My SAP target is ECC 5.0.
I have a problem in the ESS application. When I attempt to view the paycheck stub for any employee, the portal returns the error:
<b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZCHK does not exist</b>
Form ZCHK is our custom paystub form.
Thanks,
Kevin
<i></i>
Had to include form via IMG.
Similar Messages
-
Short dump with error FORM "CLEAR_SPECIAL_TABLES" does not exist"
Hi All,
We are experiencing an issue in our development system. We have recently upgraded to ECC6 from ECC5. While executing FBL3N transaction, we are getting a dump with description Syntax error in program "RFEPOS00 ".
The following syntax error occurred in program "RFEPOS00 " in include "RFPOSFZ0 "
line 1072:
"FORM "CLEAR_SPECIAL_TABLES" does not exist"
I checked in our previous systems, the subroutine CLEAR_SPECIAL_TABLES exists with an empty body in include RFPOSFC1.
And it is created by DDIC.
As per the comments in the include RFPOSFC1, we tried to generate the program RFXPRA33. But it is giving same error FORM "CLEAR_SPECIAL_TABLES" does not exist" .
Any help to resolving this issue will be appreciatable.
Thanks in advance.
Edited by: Kumar.ktk on Jun 8, 2010 1:36 PMHi,
We just had this issue after an upgrade and the solution was to compare the coding with an unupgraded system,
there we found that this missing form exists in an include with this documentation:
Function LINE_ITEMS_SPECIAL_FIELDS
caller L0F14I01, AFTER_SAVE_T021S, tcode O7R3
In case of errors: Start RFXPRA33
FORM CLEAR_SPECIAL_TABLES.
ENDFORM.
After we executed program: RFXPRA33 all errors were resolved,
Hope this helps,
Mickey -
ESS Payslip error : Form ZF01 does not exist
Hi,
We have created a form in PE51 that is ZF01 and include IMG.
But we r getting the following error message:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form ZF01 does not exist
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
Regards
AnumitDid you have to configure anything else in the img like the badi:define settings or the provide salary statement as pdf. We are past the form doe'n't exist, but we are getting a similiar message.
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when calling method INIT of class CL_HRXSS_REM
Can you help. -
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
The statement above is in the pop up error box every time, when I launch Firefox. If I click ok in the box Firefox then opens. How do I fix this initializing/launch problem?Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br /> -
ORACLE error 959 encountered ORA-00959: tablespace 'xyz' does not exist
im importing a dump to a newly created BD and im using 11g. I have already tablespaces and user for the dump to be imported.
The problems is, i have a total of 5 tablespaces created, all 4 are working well except the one tablespace and im receiving a 959 error(IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'xyz' does not exist). The log mentions that the tablespace does not exist even if this tablespace exist in the list of tablespace and datafiles created.
Hope you could help me with this. Thanks
Edited by: user8667617 on Feb 18, 2010 11:06 PMSQL> Select name from v$datafile;
NAME
C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSTEM01.DBF
C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSAUX01.DBF
F:\ORC11DBUNDO\UNDOTBS01.DBF
E:\ORC11DBUSER\USERS01.DBF
E:\ORC11DBUSER\INT_TRANSACTIONS_DATA.DBF
E:\ORC11DBUSER\INT_DATA.DBF
E:\ORC11DBUSER\CAS_DATA.DBF
E:\ORC11DBUSER\COS_DATA.DBF
E:\ORC11DBUSER\INT_ONLINE_TRANSACTIONS_DATA.DBF
9 rows selected.
SQL> Select * from v$tablespace;
TS# NAME INC BIG FLA ENC
0 SYSTEM YES NO YES
1 SYSAUX YES NO YES
2 UNDOTBS1 YES NO YES
4 USERS YES NO YES
3 TEMP NO NO YES
6 INT_TRANSACTIONS_DATA YES NO YES
7 INT_DATA YES NO YES
8 CAS_DATA YES NO YES
9 COS_DATA YES NO YES
10 INT_ONLINE_TRANSACTIONS_DATA YES NO YES
10 rows selected.
SQL>
here are the result of my query and it seems that the tablespace is recognized by the DB.
is there still any reason why? also when i try to drop the said tablespace in getting a response of the "tablespace does not exist" but when i try to create the tablespace it says that "ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_TS1) violated"
hope you can help me with this. -
Hi,
I have created a table as like below to hold pictures on the
database.
SQL> create table img_store
(iname varchar2(20), picture BLOB);
Using Oracle Portal-> Application-> create new 'FORM' based on
table, an "Upload Image Form" was created as a portlet.
The form allow to browse images which you want to upload into
database, but when i click on 'Insert' button after browsed the
image to store the image path to the column, an error message
displayed:
Error: Path ID does not exist. (WWC-50001)
Anyone can advice to me on this? Thanks.
Regards,
Sherlynhi chrigel,
i searched for the problem and found a few references to it in our bug database. i strongly suggest to open a TAR with support to analyze the problem. they will see if a patch is available for this problem or open a new bug.
thanks,
christian -
Error message "Location XYZ does not exist for item1" Message no. BBP_PD047
Hi all,
When i do confirmation for PO in SRM, the system gives error message "Location XYZ does not exist for item1" when i enter Location for the plant thought the Location is mapped to Plant in ECC system. System shows error when i click on check button, it allowing me add locations.
This is happening when confirming the PO line items having differernt plants and it is not happeing all the time, sometimes it does't work. I
f all the line items have same Plants, there is no issue.
I am not able to understand why it is working some time and not working other time.(message no: BBP_PD047 in SLG1)
can some one help me in understanding this?
Thanks,
RaviIs this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team -
The name "XYZ" does not exist in the namespace
I was getting error "The name “XYZ” does not exist in the namespace " at here
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>
How to solve?
namespace DictionaryApp.Model
public class VisiableConverter : IValueConverter
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object Convert(
object value,
Type targetType,
object parameter,
CultureInfo culture)
bool visibility = (bool)value;
return visibility ? Visibility.Visible : Visibility.Collapsed;
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
public object ConvertBack(
object value,
Type targetType,
object parameter,
CultureInfo culture)
Visibility visibility = (Visibility)value;
return (visibility == Visibility.Visible);
Next, add the converter in the UserControl's resources. In m
y simple project, I had to create this section - but hopefully you're already using this in your real apps!
You may also need to add an xmlns attribute in page.xaml for your project's namespace.
x:Class="DictionaryApp.PageDictionary"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:DictionaryApp"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:ms="using:DictionaryApp.Model"
mc:Ignorable="d">
<UserControl.Resources>
<ms:VisiableConverter x:Key="VisiableConverter"></ms:VisiableConverter>
</UserControl.Resources>I think the not implemented exceptions could be causing the issue. I would implement this functions also
public object Convert(object value, Type targetType, object parameter, string language)
throw new NotImplementedException();
and
public object ConvertBack(object value, Type targetType, object parameter, string language)
throw new NotImplementedException(); -
Transporting Process Chain - error Source system does not exist
Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
ThanksHi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
Example:
Source BW with source system AAA.
Target BW with source system BBB where the source system AAA
corresponds to the source system BBB.
Entry in RSLOGSYSMAP in the target BW:
Original source system: AAA, target source system: BBB.
Give the DDIC user in the source BW in client 000 the
authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh -
Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????https://support.mozilla.com/en-US/questions/756907
-
Form HR_SGTAXIR8A2002 does not exist
Hi,
When I try to run the IR8 form from Portal ESS I get the following exception:
"Form HR_SGTAXIR8A2002 does not exist"
It is a sapscript form. I used se71 and activated the form (but first I copied it from 000 because it was not available in our client). The language EN seems to be ok.
1. Am I missing some steps for activation?
2. Where can I see the program/transaction where this form is used? Is there a configuration table containing the sapscript forms and associated programs?
Any help is appreciated.
Thank you,
Adalbert
PS: I know what report the Portal is calling: RPCT8AR0_01. The report did run fine in R3 from the beginning. The problem is that the report is NOT running in the portal even with all the IMG config done. Strangely, RPCT8AR0_01 never asked for HR_SGTAXIR8A2002 (I had to copy it from 000) even if the sapscript form was not in our client before the copy.
After some debugging in se37 of HRXSS_SG_IR8A_GET_PDF I see that the report is looking for the form definition in table STXFADM. The form is not in the table (but I can edit it with se71). How can I get the form in this table?
Message was edited by: Adalbert Kovacs1. Yes, I get the error after using SE71->Utilities->Copy from client.
2. I am not familiar with "driver programs" but I checked the following tables:
- STXFADM
- TNAPR (I think this is for Smartforms actually)
I don't have the form in any of these two.
So, to reformulate the problem, the error is generated by a missing entry in table STXFADM. This is a sapscript form, not a smartform. What is the table STXFADM used for and how can I add my form to the table?
Thanks,
Adalbert -
Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.
We are on mySAP ERP 2004, and using ESS 60.2 version.
In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
"Service EMPLOYEE_ORGCHART_SERVICE does not exist".
Has anyone come across this?
Any suggestions on how to fix this is highly appreciated with points.Hello John,
The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
Service Short Key - EMPLOYEE_ORGCHART_SERVICE
If its not there then you need to create one entry like this:
Service Link Text Orgchart
Service Type WebDynpro application
Link Resource EMPLOYEE_ORGCHART_SERVICE
Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
This entry will have following details if its exists(else create with following details):
Resource Key EMPLOYEE_ORGCHART_SERVICE
Description Orgchart
Server
Directory Path sap.com/ess~org
Object Name Orgchart
URL Parameter
Window Name Orgchart
Window Properties
URL for PCD Page:
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
After maintaining these entries it should work.
Regards,
Shubham -
Error: Path ID does not exist. (WWC-50001)
when i try upload a binary file via table based portal-form then i get the
Error: Path ID does not exist. (WWC-50001)
The problem is: It was working for three times and then never.
tips in this direction was be very helpfull.
Thanks
Mehmet Celikaslan
nullThomas,
This is bug # 1689009, it is fixed in 3.0.9 release. The only workaround I have is to edit the generated form package and manually remove/comment all calls to wwdoc_api.remove_document in upload_XXX procedures.
Thanks,
Dmitry -
Firefox could not install this item because "install.rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.
Well that is the message i get. I can still use firefox(version3.6.8)You get that error if an extension is using an old and no longer supported method to install a plugin.
Which plugin are you trying to install?
See also http://kb.mozillazine.org/Unable_to_install_themes_or_extensions -
Error: Selected disk does not exist (21) Module-SRE-700
Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
or S to select Secondary Boot Loader ...
or wait to boot from default configuration ...Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
Maybe you are looking for
-
Hallo everybody. Need help installing Windows on a Macbook Pro, late 2008, 8Gb RAM. This is what i have: - I have a Macbook Pro 15" late 2008 - it's running Yosemite 10.10.1 - my CD-Drive died couple a years ago, so I have replaced it with a SSD: thi
-
Hi We have used the pre - calculation server to schedule work books. The pre-calculation server is ready with status in green and when i schedule the job, the job is getting executed and the mail is getting triggered but when we open the workboo
-
Hi all. I am having trouble moving an oject around a canvas in Motion 4. I have made the object 3d, it is a "Clockwork" particle and it is tilted backwards. I now want it to move around the x and y axis of the canvas. But when I engage the motion but
-
Help! Outlook syncing problem.
My outlook calendar was wiped out last night and I can't seem to push my iphone calendar back to my outlook. My pc and iphone usually sync via wifi but I can't get my appointments to push back onto my pc either wirelessly nor manually... I would gre
-
Query contain inner join to external DB
Hi every body, I have created a new sql query that contain inner join to external db of the production software. The query also uses parameters for filter data by date . I succeeded to create a qurey that will work including inner join to the externa