My head goes spinning??

I'm slowly learning flash anamation. It seems everytime I think I'm making a bit of progress I hit a wall. My latest issue came when I tried to animate a full body. Everything seemed ok until I classic tweened a bit more of the time line. What happend with the head really caught me by suprise. I make a head turn and then the head starts to spin in the air. I started over and still get the same problem. You can see it fifteen seconds in. Also some how my projects hand seemed to stop working right and i'm not sure what I did or how to get it back on track. There seems to be some part of classic tweens and shape that I keep running into issues with. SO any advice would really help.
http://www.mediafire.com/?kigeca3uemkt5wn

The first file I uploaded had a few other issues that may have distracted from the head issue. I have those all fixed. Well fixed enough so it's not a distraction.
http://www.mediafire.com/?zwvhqccbtm64byd

Similar Messages

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

Ipod wont turn on (file !), "can't mount ipod", disk goes spin, stop, spin,

Hello everyone. HELP! Major problems with the ipod, 4th generation, click-wheel, non color screen. It will not turn on fully. You here the disk spin, then stop, then start spinning over and over and you see a file with ! next to it. It will restart and it does the same thing. I have tried many times. It is formated to PC and is usually used with windows. But when it is plugged in, the computer and ipod updater do not recognize it, it tries and it says "can't mount ipod". I have tried switching to disk mode, which seems to work, but then in restarts in a few seconds and goes back to the file! and the spinning. I have tried all this on the mac also, thinking if the mac recognizes it, I can just restore it and go from there. No luck. I have tried the disk utility, which does not recogize that the ipod is present either. Please help! I've searched the posts many times and nothing answers my questions. The ipod is just over a year old, so I doubt apple would replace it. Went to the store today in London and the line was hours long and you cannot make an appointment online because they are so busy! eeks.

I don't know if it is a permanent fix, I saw that someone asked an apple employee about it and he said if anything, it is a temporary fix. However, I had the same problem about 7 days ago, dropped it, and the ipod worked perfectly. Just today it was up to its old antics again, except this time with the sad icon instead of the !folder, and instead of wasting any time I dropped it once again and it now works perfectly. So maybe ipods just need to be dropped every once in a while.

HP 4515 Scanner does not work. Scanner head goes up but doesn't return

In this PSC ... the scanner is not working ... Have tried everything like updating Drivers etc....  Actually the problem is with Scanner itself because its "Copy" function (on the printer Touchscreen ) which first scans the document and then prints also doesn't scan... it struck on "Now copying" screen... Using scanner under PC, shows scanning and struck there... then I have to restart printer. I have also made a video of this problem ... At https://youtu.be/2bW65iY9z-k Here's what I did in the video  1. Opened the scanner cover.2. Pressed the copy button and chose to copy a blank page by adding nothing on scanner to see how scanner head moves.3. Scanner head (with bulb off) moves up to the other end of the scanner.... then it tries to come back and some light also blink but nothing after that. And it is struck there. The printer takes the page but it doesnt start print anything.4. I shut down the printer via Touchscreen ... the printer throws the blank page out .... the scanner head still on the other end.5. I then power off the printer via unplugging it and switch it back on .... the scanner head now comes back to home position Video is at https://youtu.be/2bW65iY9z-k Clearly the scanner head is not jammed because it comes back smoothly after switch-off and again powering on... means the scanner head is moving smoothely up down ... Any suggestion on how to fix that... Plz dont suggest HP Print and Scan Doctor because it also hangs/struck while scanning... I also tried opening the scanner glass but its not that easy esp in this model as its scanner screws are below the scanner and easy to unscrew all...

Hey , I understand that the scanning mechanism within your HP Deskjet Ink Advantage 4515 e-All-in-One Printer is not functioning properly. I would like to assist you today with resolving this issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. Because your machine is also getting 'stuck' on 'Now Copying', and the scanner bar (bulb) is not responding properly within your machine, I believe that your HP Deskjet is encountering either a power or a Firmware Programming failure, rather then a scanning mechanism hardware failure. With that being said, can I please have you follow the steps below to resolve this issue.   Step 1: Check Power: Please plug your printer directly into a wall outlet for power. Power strips and surge protectors may cause your printer to lack power and not respond properly. Once your printer has been plugged directly into a wall outlet please test the Copy function. Should Copying still 'stall' on 'Now Copying' please proceed to the next step.   Step 2: Power Reset: With the printer ON, disconnect the power cable from the rear of your printerLeave the power cable disconnected for 30 secondsPlug the power cable back inYour printer should start back up on its ownOnce your printer returns to the ready state please perform another test Copy. Should Copying standalone still fail, please proceed.   Step 3: Update Firmware: The Firmware is the internal programming within your printer. Essentially it is the 'brains' of your printer and controls what the printer does and how the printer does it. If the internal programming within your machine is corrupt it may cause performance issues within your product. Please click here for detailed instructions on updating the Firmware from the front panel of your printer. Once the Firmware has been successfully updated please test Copying from the front panel again. Should Copying now work, please attempt a Scan.
  Please respond to this post with the result of your troubleshooting. Should the issue persist, there is an additional programming Reset I will have you perform. I look forward to hearing from you!

SOAP request without HEADER goes through

Hi Guys,
I wonder if any one has seen this issue. While testing through SOAPUI, if I provide header then validation happens properly. But if no header is provided then the PeoplSoft CI-based web service fails to notice MISSING HEADER and returns results.
thanks

Hi John,
What is the issue here? Userid and password not bening sent to Siebel web server. If yes, then thats not an issue :). Thats how it works.SelfServiceTemplateRuleQueryPage doesn't need any user id and password to send back the response.
Vikram

Firefox goes Spinning Beachball all of the time under Mac OS X 10.7.5. I have to force quit it!

It does this all of time. I'm using Chrome right now & it doesn't! I have to stop using the browser that I have used for many years & now I'm using Chrome. Gosh, no issue like that!

Hi jayfmn, <br>
please upgrade to the latest Firefox and also maybe this article will help you:<br> [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]

My heads in a spin - Older Dual 2.7 or Newer Dual 2 Power Mac

So - story so far
I bought a iMac intel. Yep I got sold on all the hype of 2x faster, the look of it, etc, but wasn't happy with it, it had problems, I returned it, and got a refund. But now I still need a mac.
My needs for a Mac are to take up video editing as a hobby. I have Motion waiting and ready to go.
So now I have faced facts and realised I would be better off with a PowerMac than a Intel Imac for all sorts of reasons (Eg Rosetta, Lack Of Universal Sofware, Lack of expansion, etc)
But my head is in a spin - I have the opportunity to buy a Power Mac G5 2.7GHZ DP (refurb) or a PowerMac Power Mac G5 DC 2.0GHz (New).
My question is this. Am I better with a older Dual (eg no PCI Express, DDR Ram, etc) which has a meaty processor - or the newer Dual Core G5 Power Mac 2.0 (which does have PCI express, DDR2).
The G5 CD 2Ghz has a less than adequate video card (GF6600LE 128mb) which of course I would have to change, but this model is newer and £300 ($600) cheaper.
Or should I pay the extra for the 2.7Ghz Dual, (which has a Radeon 9650 256mb).
Head is spinning - the decisions, the decisions
Any advise greatly appreciated.

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the tag. This not only gives points to the posters, but points anyonesearching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...

I'm Going To Have A New Hard Drive Installed (500GB)

Hi...
I’m going to have a 500GB hard drive installed (highest available so far - from what I know) in my MacBook Pro (bought March 2008) 17inch. I was wondering if there is anything I should pay attention to? And I’m going to go with a clean install (not to have the hard drive cloned over) - after I get it home, I’ll put the OS in myself and then all my other software etc... But what cross’s my mind is my “iTunes”...
What’s going to happen to my iTunes - and what can I do to keep all my songs and stuff?
Any comments, suggestions and opinions are welcome....
Thank you in advance...

No..... Your right - it just takes time for things to sink in - putting together a software program along with a “case” that will make my removed hard drive act like an external hard drive takes time to sink in.
Is this right? Am I going to have a new empty hard drive in the laptop with my removed hard drive in a case, enabling it to be used as an external hard drive? If so, then were dose the software go?
Do I need to download it first to the (soon to be removed) hard drive? And then access it when it becomes an external hard drive?
But the whole issue might be irrelevant because I really want to do a new install of my OS - I’ve been through the wringer with screen sharing and other products that have come and gone (passwords, screen names, ID’s, emails) MobileMe, Time Capsule, iWeb, BlueTooth, In home networks, Skype, iChat, AIM, Bonjour.... My head is spinning... Because my iMac and laptop are all using my one email (or at least at first they were) and one password and one email (sounds simple) but it’s not... If you wanna talk to someone using my iMac while I’m out and about in town - the computer’s think your trying to talk to yourself, the same email address (same passwords etc) - and in a lot of situations, you run into trouble trying to do this - or at least - you get confused (is that my email for the iMac or is that the email for my laptop - system preference this, system preference that)...
I’m even ready, willing and able to forget about the songs on my iTune just to have a clean install (but that’s just between you and me)...
So in closing - as long as that removed hard drive can be used as an external hard drive with the use of a “case” then I’m good to go... I’ll take it from there....
But please let me know if I can not use my soon to be “removed” hard drive as an external hard drive... Then I’m (maybe) willing to forget about my iTune’s... (I don’t know - I’ll see)....

Javascript to put text of selected tab in a header element at top of page

Create a simple html document a header and main div's.   tab menu, say three tabs, in the main div. Want the header to display the text of the selected tab.
Here is the example with default SpryTabbedPanels.js and SpryTabbedPanels.css.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="header">Content for id "header" Goes Here :Want this to be the text of the selected tab.</div>
<div id="main">
<div id="TabbedPanels1" class="TabbedPanels">
    <ul class="TabbedPanelsTabGroup">
      <li class="TabbedPanelsTab" tabindex="0">Tab 1 text</li>
      <li class="TabbedPanelsTab" tabindex="0">Tab 2 text</li>
      <li class="TabbedPanelsTab" tabindex="0">Tab 3 text<br />
      </li>
    </ul>
    <div class="TabbedPanelsContentGroup">
      <div class="TabbedPanelsContent">Content 1</div>
      <div class="TabbedPanelsContent">Content 2</div>
      <div class="TabbedPanelsContent">Content 3</div>
    </div>
</div>
main content
</div>
<script type="text/javascript">

</script>
</body>
</html>
Anyone have a javascript for this?

Just to clarify:

Header Value Condition to Distribute at Item

Hi dear all.
Please clarify me about the following issue, already discussed here.
There was already a suggestion proposed which I went through but unfortunately without the expected results. Let me go a little bit more in detail.
How can we configure the condition type such that It would be possible to maintain the Fixed amount at header and then it should automatically distribute equally for the items (Based on quantity).
I will enter the Condition Type ZM00 amount at Header as 2000 EUR and in the items it should automatically split up as :
Ex ->Condition Type Item Qty Amount as it shoulb be distributed.
Item A Qty=1 PC, so ZM00 => 400 EUR
Item B Qty=2 PC, so ZM00 => 800 EUR
Item C Qty=2 PC, so ZM00 => 800 EUR
According the suggestion, I made:
In <b>Control data 1</b> TAB
put calculation type as <b>C</b>
In <b>group condition</b> TAB
<b>active</b> group condition.
By doing so at Custo, running the process, by entering the amount of 2000 EUR at Header, going back the Overview we see the following distribution:
Item A Qty=1 PC, so ZM00 => 2000 EUR
Item B Qty=2 PC, so ZM00 => 4000 EUR
Item C Qty=2 PC, so ZM00 => 4000 EUR
It looks like (at it is actually) that the value of 2000 EUR has been understood as a <b>unit value</b> and not a total value, as it should.
How to make the system understand it by just inputing the value without maintaining "per x units" (in this case would be 5). Actually the unit price is not relevant, only a total value. The quantity would be then just a distributing criteria.
When I enter the value 2000 per 5 (PC) then the result is correct.
You also mentioned the Condition Group activation. Can someone please clarify me what is the logic behind? In fact, the type of materials for which the total value is due to be distributed in this example according, let's say the quantity, is assigned to a specific material group. How is then possible for ZM00 to address its total value to these three items? Remember that there is no condition record maintained for ZM00. He's just a manual entry, decided on that moment.
I really appreciate your prompt reply, as there is some urgency on solving this riddle.
Thanks in advance and Best Regards
Rui Viegas

Hi Pathik.
Regarding the requirements you mentioned I have to say:
There is no sales order. I've created a delivery based on a Project (CNS0). Then I'm trying to create a Pro Forma invoice. Only at this stage the pricing will run.
On the delivery I can have several materials, as I can have more then one material group involved. That's probably were the problem begins. The Group Condition, in this case, can have some problems on identifying which materials to look for. I made what you told me. Anyway, in the ZM00 settings I've place the Group Condition Rotine 003 (Pricing Material Group). It also required me to flag the RoundDiffComp.
After placing the value 2000 EUR under the 'Amount' column, here's the distribution I got:
Item 10 A Qty=1 Net Value = 0
Item 20 B Qty=1 Net Value = 0
Item 30 C Qty=1 Net Value = 2000
Any suggestion?
On the Tab 'Changes that can be made' I have also:
Manual entries 'C'
Delete - X
Amount/ Percent - 'X'

Why Do Pages Headers Go Away on a Two Page Document When I select No Header for Page One

MacBook Pro 15 Retina, Mid 2014 Chassis, Yosemite 10.10
In the PAGES application. I am writing a simple business letter I copied from a prior letter. The letter is two pages long. I add a header in the second page and it appears on the first page as well. I correct the problem, and unselect the box that indicates I want the same header on all pages. The header goes away on page one and on page two.
I cannot access a header for page two. It is as gone as gone can be.
I assume there is at least some amount of QA on this stuff, or do the customers do all of that?

Hello Peter,
Thanks for the reply.
I want to make sure I understand.
So I want to write a simple business letter, say to you. All standard settings, profile for a business letter.
I write the first page, and I happen to go one paragraph into the second page. At the upper right hand corner of the second page I "mouse over" the header, select the right side box, and enter To Peter, Page Two. Then I navigate to Document Inspector, under headers and footers, I select "Hide on First Page of Section." But that is not right? Because it doesn't solve my problem?
Just to make sure I understand, even though I am in the second page of the section, selecting the option will make the page headers go away for page one and page two? Forgive me I appreciate your help and am not blaming you. Apple expects me to not only go through the search to find this setting as it does not default, but Apple also wants me to create a second section for the second page, and then enter the header, then navigate to Documents Inspector and then select "Hide on First Page of Section?"
By the time I go through all of that, then save and print the two business pages, I then create an envelope in a new Pages document. Give it a name, enter your address, and then print, and save the envelope.
Thanks again Peter.
Does anyone else think that seems like a lot of extra work to get a two page, simple business letter, into the post?
Cheers,
Ken

I'm trying to add a header beside my logo and center the header only

I'm trying to add a header beside my logo and center the header only

Have you got a code for your master-head? If not try something like this:
HTML goes like this:
<div id="masthead">
<div id="logo">
</div>
<div id="header">
Header Goes Here </div>
</div>
Your CSS goes like this:
#masthead {
min-width: 600px;
#logo {
float: left;
width: 200px;
#header {
margin-left:200px;
text-align: center;
If this not what you want then please post a link of your work you have already done so that basic CSS code can be given to center your text.

Header on question (Didnt have a title last time)

Just like the sit we are on the "header" on the top with the search bar adjust as you move the site to the side. Then when it get small enough it stops shrinking. I tried to do this but all i can do is when you move the site to the side the box becomes bigger and the text goes into two rows.
Any ideas on help?
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="ddsfsdf.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="header">Content for id "header" Goes Here</div>
</body>
</html>
(CSS)
#header {
width: 100%;
height: 100%;
margin: 0px;
padding: 0px;
background-color: #eeeeee;
min-height: 100%;

Basically there are 3 types of web pages:
Fixed-width in pixels or ems.
Fluid width in %.
Semi-Fluid width in px and %.
Fluid:
==========
body {width: 98%}
Fixed & centered:
===============
body {
width: 960px;
margin:0 auto; /**this is centered on screen**/
Semi-Fluid :
==========
body {
width: 100%;
max-width: 1280px;
min-width: 800px;
To further complicate matters, there are responsive and adaptive sites that adjust layouts to fit varous devices (desktops, tablets and smartphones).
Decide who your target audience is and build layout accordingly.
Nancy O.

Hinted streaming, fast start and fast start compressed header

Hi,
I am trying to export a movie trailer from FCP through Compressor for use on a website hosted by Wordpress. I am using h.264 and am trying to decide whether it is optimal to use hinted streaming, fast start or fast start compressed header. I found this discussion stream:
http://discussions.apple.com/thread.jspa?messageID=10451326
which was helpful, but stated explicitly to not use fast start compressed header. Can someone explain why not? I am also interested in a more in depth explanation of how/when you would choose each of these options.
Any insight would be greatly appreciated.
Thanks,
Becky

The header information would normally be at the end of the file. Fast Start places it at the beginning so that this is the first part of the file to be loaded. This means that you can start playing the movie before it has finished downloading.
Fast Start Compressed Header goes one step further by compressing the header, but it is not always compatible with applications and I believe Adobe Flash Player is unable to play it.
Hinting tells the server the optimal method of streaming the movie, but this is only relevant if you have a streaming server (expensive). For most people, Fast Start will suffice.

Sync problem on nested talking head sequence when using dissolves

Hi everyone.
I'm working on a small project that involves a talking head chroma keyed on a still. I've nested the sequence and mixed down the sound at the same time in order to keep everything in sync.
Now I'm adding stills (with a small amount of motion) to Track 2. Sync is ok when stills are cut in but the talking head goes out of sync when I try to dissolve from the still back to the interview.
Is there a way to lock the video and audio of the interview together?
Thanks for your help.
Cheers,
Chris

Hi all,
For those who are interested, I have found a few things that worked for me, though I'm not sure why it worked.
This sync issue is one of those dreaded "intermittent" problems which would occur when I played out my timeline to tape. Here's what I did:
1. I changes the RT setting on the timeline from safe RT to unlimited RT. It seemed to give me a smoother playback of the first 8 minutes of my timeline previously cut. everything stayed in sync.
2. When the last minute or so played out. It lost sync. My solution was to adjust the length of the still on track 2 by 2-5 frames thereby delaying the dissolve back to the talking head. This small timing adjustment made all the difference. But again, I'm not sure why.
Just thought I'd share.
Cheers,
Chris

My head goes spinning??

Similar Messages

Maybe you are looking for