My Headphone jack in my iphone has a peice of headphone plug stuck inside so it constantly thinks theres headphones plugged in and i cant get it out!! what do i do?!?!!? please help!
My Headphone jack in my iphone has a peice of headphone plug stuck inside so it constantly thinks theres headphones plugged in and i cant get it out!! what do i do?!?!!? please help!
Make an appointment at the genius bar. They may be able to help you.
Similar Messages
-
My iphone4 was stolen i goto fine my iphone and i acsidintal press wipe out what i do? please help
my iphone4 was stolen and i go to,,fine my iphone and i accidintal press a wipe out,,,can i truck my device..i afraid coz i wipe out,,what i do to back my iphone4 please help..,.,.
There is nothing to do. By remote wiping it, you prevented it from being further tracked.
-
Theres something in my iPhone 5 jack and i cant get it out, what do i do?
i usually keep my phone in the front pocket of my jeans, as people do, i think a piece of pocket fluff must have gotten inside the jack and when i plugged my headphones in it must've pushed it in making it stuck. i've tried getting the hoover to suck it out and used a small tooth pick to get it out but its still stuck in pretty good. i really dont know what to do, do i go to apple? will they take it apart and take it out?
Get a paperclip & unfold it. Now, get the stickest tape you can find and wrap then end, sticky side out...make sure it is FIRMLY atached to the paperclip end. Insert into headphone jack, rotate & it should get everything out. Repeat as necessary.
Finish with compressed air. -
Why did my iphone 3gs go black and now cant get it to turn back on? please help!!
my iphone 3gs was fully charged i went to my girlfriends house in the morning and it was working fine all day around 3 oclock it suddenly just off and went black i tried the "cold boot" that didnt work i tried charging it in the wall and with my computer i tried to restore my phone but itunes wont recognize it ive also tried holding the home and power button simultaneously waiting 10 sec while it is plugged into the computer releasing the home button and waiting foritunes to ask me to restore my iphone but even that doesnt work please someone help me
ps the iphone is only about 5-6 months oldTry the troubleshooting help here. http://www.apple.com/support/iphone/assistant/phone/
You may need to restore your iPhone.
If it won't restore, try here. http://support.apple.com/kb/ht1808
If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange. -
Headphone jack (the very end) is stuck in my iphone 4 and i cant get it out. How much would it cost to get it out?:/
i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
Thanks for your help but i've already tried this a couple of times. -
hi, I forgot my email and password and my iPhone need to activate i don't know what to do and i cant remember the email address or the password please help me I don't wanna lose my phone.
IF you forget your email and password and you are stuck in the activation process, it usually gives you a clue on what is your email like w********[email protected] If you really own the phone, you already have a clue on what is that email add. Then go to appleid.apple.com, click on manage my device, enter what you think is your email addy (no harm in trying that it wont lock) then click on i forget password. This will give you an option to either sent the password to an alternate email. If you have several, then sad to say you have to open it one by one and check including your spam mails. Another option is to answer some security questions you made while creating an apple id. Your last option is to call apple support. If you know the email add and you can prove ownership, they can reset the password for you
-
I pre-ordered ARTPOP on Saturday and today it says Purchased. I used my iphone to pre-order it. But it still says Purchased. Is there anything I can do, instead of having to go on a computer? Please Help! And is it going to charge me again?
Glad I'm not alone. I preorded it on my computer...
-
Security Question - i can not change it - and i have forget the anwser what can i do please help me i'm new in iPhone
There should be a blue link to your rescue e-mail there. If not, you will need to contact iTunes support. See this article: http://support.apple.com/kb/HT5312
-
I ordered mac OS and I got the email for License and I didnt get the attachement for content code. Please help me getting the content code.
It's a two email process, one email has a locked pdf with the redemption code. The second email has the password to unlock the pdf. They come separetly, so you may have to wait for the 2nd to arrive.
-
had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?
You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps
-
windows thinks my itouch is a camera and itunes says this ipod can't be used because the software isn't installed - reinstall itunes. i've done that and continue to get the same error. can someone please help?
(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
my ipod wont play music on my ihome and I know it is not the ihome because I put my brothers ipod on it and it worked I dont know what is going on please help me
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings -
I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
Can anyone please help?Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
Can't figure out what the problem is, please help!
Hey, so I have a Mac Mini which I bought nearly 3 years ago. I've been running the latest system 10.6.6, when the issues started. Everything would just unexpectedly quit and occasionally, I'd get the "You need to re-start your computer..." grey screen, also the desktop would refresh itself and not open any folders or anything at all. Finder, Console, Dashboard Client, etc all quit,´and sometimes the nmblookup thing would pop up, but before I could click Allow or Deny, it'd dissappear again.
I ran the Hardware Test, and four times out of seven it said "No Trouble Found" while three times out of seven it gave me an error code starting with 4MEM. The system profiler, meanwhile, told me that both RAM cards were OK. I did the Hard Drive verification through Utilities and it gave me some problem starting with "Key..." and said it could not be repaired.
SO, I reformatted the HD as it suggested, deleting everything (I've got it backed up though). Then, I installed Snow Leopard again, and the issues were still present. It would Quit Unexpectedly freeze up, etc. So then I went and erased the hard-drive again, and a new partition was made automatically. After that, I tried installing the original software which came with the computer. Except that after Installation Disk 1 was finished, the computer restarted and then it was just a blue screen. Nothing. It didn't ask for the second disk or aything. I tried again, and in the middle of Disk 2 Installation the grey "You need to re-start..." screen came down. ***. Now, I can't seem to install ANY Mac OS X on my computer, not what it came with, not the Snow Leopard, nothing.
Again, Hardware Tests tells me everything is ok, and the Hard Drive also says there's nothing to repair. Then what is this? I don't even know what it could be anymore! Please help if you have an idea of what this might be! Unfortunally, at the moment I have no money to send it to the repair so they'd check=/
Thanks in advance, any help would be greatly apreciated!Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!
-
My IPhones total life time calls is at 4,924,000,00 and I can't figure out if this is a glitch because I know that I have DEFIANTLY not called for that long I don't know if this will be resolved but someone PLEASE HELP
Glad it helped!
For what it's worth, I suspect you'd have to restore the phone as new to resolve the issue. If it were mine, I'd probably elect to live with the weirdness rather than go through the fuss of a restore.
Best of luck.
Maybe you are looking for
-
Is there a way to make the Form Wizard group things in the order I want it to?
I am creating a multi-page checklist. Each question has a radio button with the possible answers of yes, no or n/a. When I run the Form Wizard, it detects the boxes I created, in Word using the Developer, but it puts all the yes's in a group, all the
-
Receiving message after Payload Swap
Hi All I am stuck with a scenario where we have to deliver a PDF as an inline message and not as an attachment. The PDF is sent from an R/3 system through a Proxy as an attachment and then this is sent back into the IE Pipeline using a SOAP Channel.
-
Please help I have just bought an apple tv, my problem is that when ever i try and use the remote to do things with the TV it doues things on my iMac aswell. How do I un pair it from the iMac so it just workes with the Apple TV only
-
1 SP for multiple Marketing Form
Dear Experts.. Plz check this SP *IF @transaction_type IN ('A', 'U')AND @object_type in ('22') BEGIN If exists (SELECT T0.DocEntry FROM opor T0 inner join ousr t1 on t0.docentry = t1.userid where t0.docentry =@list_of_cols_val_tab_del AND t0.U_series
-
How to remove all transitions?
I used the automate to sequence with default transition. A few dozens of transitions were added to the sequence. How to remove all the transitions without deleting the sequence and starting from scratch please? Thanks in advance.