My inbox says its receiving 200 mails but only 3 in the inbox, why is this? It also says its sending 3 when I am only sending 1.
When using mail the system shows information that it has received mail (today it said 300) but only 2 or 3 come up in the inbox. It never used to do this. Why? Similarly when sending mail it says sending 3 of 3 when I am only sending 1 email.
Back up all data.
Select the problem mailboxes in the mailbox list, then select
Mailbox ▹ Rebuild
from the menu bar.
Similar Messages
-
User receives notification mail but not workitem.
Hi,
i have encountred an issue that one user from his SAP inbox executed workitem many times resulting in a workitem stuck then
he forwarded his workitem to another user.
The other user is receiving notification mails but not workitem.
Plz help me on this issue.
Thnx in advance.
Regards,
satishHi Vamshi,
Goto t-code SCOT; double-click SMTP and specify the mail-host and mail-port for the respective mail server.
Make the ‘Node in use’ check box as checked.
Click on the ‘Internet->set’ button under ‘Supported address types’ to specify the email-address of the recipient
Specify the email-address of the recipient who is going to receive the alert mails.
Specify ‘*’ in case of multiple email-ids.
Goto Menu->Settings->Default Domain and specify the domain id of the company.
Save the settings done in SCOT.
Next you need to define the Alert rools.
Regards,
Rajendar K -
I have no SEND button when I write an e-mail. I am receiving e-mails but cannot reply
Everything was fine this morning. I received and replied to e-mails. Then all of a sudden I went to write an e-mail. Wrote the e-mail but did not have a Send button, nor the toolbar that it was on. In fact the whole layout of "Write" looked different. I am still receiving e-mails but cannot reply to them. Why?
Many thanks - I now have a Send button and used it to send a reply to you.
-
I cannot send mail from Firefox. Can receive E-mail but cannot send it. This worked OK until today. I have had firefox for many years. Just reinstalled Mozilla and still cannot send E-mail from firefox.
I use comcast.net for E-mail,using Mozilla to get there.If your Office email account's SMTP authenticated?
Any error message provided and if so, what?
Are you also accessing an email account and SMTP server provided by SBCGlobal.net with either email client and if so, are you able to send messages with this account and SMTP server when connected to the internet via SBCGlobal.net at home?
And let me get this straight - both email clients work fine without any problems sending messages with your Office email account and SMTP server when connected to the internet at a friend's house that uses another ISP besides SBCGlobal.net but this is an Apple problem?
If an Apple problem, then you'd have problems sending messages with this account and SMTP server regardless whose network and ISP you are connected to.
Regardless what this more than likely under-trained or just unaware person at SBCGlobal.net told you, all ISPs have restrictions on using an SMTP server that is outside of their network or that isn't provided by the ISP used for connecting to the internet.
Some ISPs allow the use of an authenticated server only that is outside of their network but some block its use regardless.
Within the last year or so, SBCGlobal.net made a drastic change in regards to such restrictions and conveniently neglected to inform their customers beforehand. Those using an SMTP server that was outside of SBCGlobal.net's network regardless if the SMTP server was authenticated were required to "opt out" of Port 25 blocking with SBCGlobal.net in order to use an SMTP server that was outside of their network which was working fine before this change was made.
Have you opted out of Port 25 blocking with SBCGlobal.net? -
837 - can receive e-mail but cannot send.
Hi guys,
I've just installed a 837 at restaurant. The client checks his e-mail via outlook. He can receive e-mail but gets errors when trying to send. Any ideas. Everything else works great.
Thanks in advance.Hi Guys,
The guru in our office that configured this router
says that he cannot figure out why we cannot send e-mail via outlook. I put the old router and cable modem back in at the site and we could send and receive e-mail via outlook fine. ( PPOE setup )
Put the Cisco back in and no luck.
This is the config file. If anybody can point me in the right direction to make the change I will try it at the site. We are using port 4 (10.100.100.1)to connect to a linksys for public internet access. He is behind the 192.168.100.xxx subnet.
Hope this helps.
Thanks in advance.
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
interface Ethernet2
ip address 10.100.100.1 255.255.255.0
ip access-group 106 in
ip nat inside
ip virtual-reassembly
no cdp enable
hold-queue 100 out
interface ATM0
no ip address
atm vc-per-vp 256
no atm ilmi-keepalive
dsl operating-mode auto
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet1
duplex auto
speed auto
interface FastEthernet2
duplex auto
speed auto
interface FastEthernet3
duplex auto
speed auto
interface FastEthernet4
duplex auto
speed auto
interface Dialer1
description ip address negotiated
ip address negotiated
ip access-group 111 in
ip mtu 1492
ip nat outside
ip inspect myfw out
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password xxx
ppp pap sent-username [email protected] password xxxx
ppp ipcp dns request
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 192.168.100.250 5631 interface Dialer1 5631
ip nat inside source static udp 192.168.100.250 5632 interface Dialer1 5632
access-list 102 permit ip 192.168.100.0 0.0.0.255 any
access-list 102 permit ip 10.100.100.0 0.0.0.255 any
access-list 105 deny ip 192.168.100.0 0.0.0.255 10.100.100.0 0.0.0.255
access-list 105 permit ip any any
access-list 106 deny ip 10.100.100.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 106 permit ip any any
access-list 111 permit udp any any eq 5632
access-list 111 permit tcp any any eq 5631
access-list 111 permit tcp any any eq telnet
access-list 111 permit icmp any any administratively-prohibited
access-list 111 permit icmp any any echo
access-list 111 permit icmp any any echo-reply
access-list 111 permit icmp any any packet-too-big
access-list 111 permit icmp any any time-exceeded
access-list 111 permit icmp any any traceroute
access-list 111 permit icmp any any unreachable
access-list 111 permit udp any eq bootps any eq bootpc
access-list 111 permit udp any eq bootps any eq bootps
access-list 111 permit udp any eq domain any
access-list 111 permit esp any any
access-list 111 permit udp any any eq isakmp
access-list 111 permit udp any any eq 10000
access-list 111 permit tcp any any eq 1723
access-list 111 permit tcp any any eq 139
access-list 111 permit udp any any eq netbios-ns
access-list 111 permit udp any any eq netbios-dgm
access-list 111 permit gre any any
access-list 111 deny ip any any
dialer-list 1 protocol ip permit
control-plane
line con 0
exec-timeout 120 0
modem enable
stopbits 1
line aux 0
modem InOut
modem autoconfigure type usr_sportster
stopbits 1
speed 19200
flowcontrol hardware
line vty 0 4
exec-timeout 120 0
login local
length 0
scheduler max-task-time 5000
end -
My i phone 4 receives e -mails but cant send them
My I phone 4 receives e-mails but cannot send them (previously could send and receivce to hotmail and cloud) any suggestions? O2 said it was a fault with the phone, apple says it is not, it is technical instead so not covered under warranty, not impressed!
Did you verify your outgoing mail server settings? Is it isolated to just carrier or wifi as well?
http://support.apple.com/kb/HT4519 -
I just purchased an ipad2 and I can receive e-mails but I can't reply to or forward them. I also can't send a new e-mail. I receive a message that the e-mail has been placed in the outbox because the server won't allow 'relaying.' On my laptop, using the same e-mail server, I am fine. What can I do to make the ipad2 e-mail function properly?
Contact whoever manages your email server and ask them what ports and security to use for SMTP from remote locations. ISPs and email admins often require different SMTP settings when sending email when not connected to the server's or ISP's network.
-
iPhone 4S. My e-mail service provider is Embarq. I am receiving e-mails, but I cannot SEND/REPLY to e-mails. I get message that recipient was rejected by the server because it does not allow relaying. Any suggestions.
Problem has been solved thanks to a posting by AmberDrivingKendal on 5/15/11. More Like This section was a great help.
-
I use outlook for my e-mail on my home computer. I bought an iphone5 and set up mail I am receiving e-mails but cannot send. Not sure what my outgoing mail setting should look like on my phone.
When you set up the email account on your iPhone you probably did not set up the outgoing mail server correctly. Incoming and outgoing are two separate sets of settings. You need to set up both, and also enter your username and password for both.
-
i cannot find my account password, i tried to receiving e-mail but there is no answer from itunes store.
my account's e-mail has a word '+' for using multiple account to accessing another country's store.
for example. 1. [email protected] 2. [email protected] 3. [email protected]
like this.
so, i forgot it. but there is no way to find my password.
and i couldn't find any answer for this situation.
i think there is a problem that my account has + word. so maybe apple's automatic answering system does not work with that.
please help me. thank you.When you get into General just scroll all the way to the bottom. It's the last entry. For more help with this see:
What to do before selling or giving away your iPhone, iPad, or iPod touch -
TS2755 since updating to ios7 I can receive e-mails, but cannot send e-mails from my phone
since updating to ios7 I can receive e-mails but cannot send e-mails from my phone
Hi there ritawilk,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
-Griff W. -
Can receive E-mails but won't send e-mails
Why can we receive e-mails but cannot send them out?
Hello,
What happens when you try send email?
See also:
*[http://mzl.la/1f8x6ld Sending and Receiving Emails]
*[http://mzl.la/1k5DWjq Thunderbird in safe mode]
*[http://mzl.la/1ml3Fmj Using multiple profiles] -
Am on Business BT Broadband and am in the process of setting up my BT Connect e-mail address. System allows me to receive e-mails but I can't send them - any suggestions on how to resolve this?
Your email service may be blocking access to send emails from a point outside their network. If your email service has a browser interface try connecting to it to send an email.
-
Receiving e mail but unable to send
I am receiving e mails but unable to send
Who is your email provider?
Have you contacted them to make sure the outgoing mail settings are correct? -
Receive e mail but when trying a link screen freezes
I receive e mails but when using a link from the e mail screen freezes for 15minutes or so.
How to overcome?I would focus on getting just one of these services running first--Gmail runs fine for inbound and outbound mail on my Yosemite/Apple Mail system. Let's check your outgoing Mail settings for Gmail:
Is the "Outgoing Mail Server (SMTP)" for your Gmail account (under Preferences/Accounts) set to a definition you made for Gmail, as opposed to some other e-mail service? And is "Use only this server" for this Gmail account checked?
Is this Gmail outgoing server definition (choose it via "Edit SMTP Server List") set according to the Google documentation (https://support.google.com/mail/troubleshooter/1668960?hl=en&from=13275&rd=1)?
On my system, under Account Information for my outgoing Gmail server settings, I have "smtp.gmail.com" as the Server Name and "TLS Certificate" set to None. Under Advanced, I have "Automatically detect and maintain account settings" checked, Port set to 465, "Use SSL" checked, "Authentication" set to Password, "Allow insecure authentication" unchecked, and my User Name (which includes the @gmail.com extension) and password. If you're using 2-step verification, you need an "app password" from Google instead of the one you'd type in a web browser. I've seen Mail drop this SMTP password setting if I don't save the configuration before editing a different account setup.
If you've made changes, save them and exit Mail, then restart it and verify the changes took hold.
There could also be an issue with redundant or corrupt entries in your Login Keychain (via Keychain Access) for your Gmail account, but I'd focus on the Mail preferences first.
Maybe you are looking for
-
Problem with JTree while expanding/collapsing a node
Hi, I'm using a JTree for displaying the file system. Here, i want that whenever a node get expanded, it should show the latest files/directories under that node. Now, what i'm doing is, getting all the files/dir's using files.listFiles(), under that
-
I have a MacBook Pro that needs to have the OS installed. The Superdrive is disfunctional and I thought I could load the OS through an iMac Firewired to the MacBook. First, is this even possible. It seems intuitive...Insert the OS into the iMac an
-
I want to put some ringtones on my iphone. I've looked through all the support info. I go to itunes. Some of the menu commands are black (useable) and some are grey (not an option). Under the "store" tab - the "create ringtones" command is grey and t
-
Cold Fusion 8 License Exception
We purchased ColdFusion 8 Standard Edition and are running one Website on IIS. When I had people looking at some CF templates with mockups, I got a License Exception disallowed IP addresses error. Please advise- the only fix I found listed in this CF
-
How to print column wise records
Hi, I am very sorry. Actually i have searched many pages but i didn't find my solution. plez any body halp me out from this problem.. Actually my table structure is this.. Employe_payroll:- Empid|Salary|Month|Year So record stores in row wise in each