My internet is only connecting when the time capsule is performing a backup how can I fix this? I use the wireless for my computer and not connecting is frustrating.
The airport time capsule 2TB is only connecting to the web when performing a backup, it just started doing this how do I fix it?
That is a weird one.. never heard of it drop out except doing backups.
Reset the TC to factory settings.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup with all short names no spaces and pure alphanumeric.
It should then work fine.. but I need more info if you still have problems.
What modem? Is it a router?
How is the TC connected?
Is the computer running Mavericks?
Similar Messages
-
since installing the latest version... when I open a new window it opens everything I have minimized too... very annoying. How can I fix this, I minimize to go back to a window not have multiple windows open.
== This happened ==
Every time Firefox opened
== after installed last version...Well, then isn't there some way to induce Firefox to give Windows parameters that make it open the fershlugginer window in the *same* position, instead of an offset position?
Dafydd -
When I burn a disk from my playlist the songs are out of order. How can I fix this? Thanks!
I'm not 100% sure but I think you create your play order manually then select the playlist, right click it (or use ctrl+click) & select "Copy to play order".
I think when you burn that playlist it should obey that order, it has been so long since I made a mix CD that I'm not certain, good luck. -
when I try to download Mavericks OS from the App store, it says "waiting". The download process doesnt actually start. How can i fix this?
- Temporarily disable anti virus software if installed.
- Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select Mountain Lion. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase. -
When i try to sync my ipad with the itunes on my computer it gives me an error message. " The sync session failed to start. How can i fix this?? I had to uninstall itunes on my computer because of runtime error R6034.
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?
You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.
-
Error message (-51) keeps coming up when I try to send music from iTunes to my iPhone and then the music won't come over. How can I fix this message?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I made an iMovie from iPhoto pictures that both look GREAT. Watching the DVD i burned on a Playstation2 makes the pics look fuzzy. Why? how can i fix this?
MPRWhen you watch on your Mac, it is at or near HD 1920x1080 pixels (about 2 megapixels), depending on the resolution of your screen. Most photos today are 5 megapixels or greater, depending on your camera, but anything over 2 megapixels must be reduced when put in a video.
When you create a DVD, you must further reduce it to 640x480, standard definition. This is about 0.3 megapixels. iDVD will do this for you.
You can fix by creating an HD movie in iMovie. You can Share this using Share/Export Using QuickTime to an MP4 container using the h.264 codec. You can then put this movie on your PS3 using a USB thumb drive.
That should give you good resolution.
(NEVER MIND, YOU SAID PS2 not PS3, my apologies) -
My ipod is stuck in permanent shuffle. It won't play albums or my playlists in the order that they were created. How can I fix this?
Do yo have Shuffle turned on?
- On the Now Playing screen on the right hand side below the scrubber bar are crossed arrows. That is the Shuffle control. Tap it until it is white for no shuffle
- There is also Shake to Shuffle in Settings>Music
If still problem:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing
iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result -
I have a Photopshop Elements 10.0 on my Mac, I purchased it in English, did an upgrade of my Mac to OS Yosemite and suddenly the language of Photoshop is German. How can I fix this ?
I have found another solution. I upgraded to Yosemite and found the the App Store version of PSE 10 (which didn't change) was suddenly in German. Close PSE if it is open. Use the Finder and go to the PSE 10 application in the Applications folder. Right click (or ctl-click) on it and select "Show Package Contents". Then go to Contents>Locales and delete the de_DE folder. (I imagine you could also rename it to something starting with a letter after "e". I think PSE is probably using the first language it comes to in this Locale folder.) Start PSE. It worked for me. Hope this helped.
-
How to burn an iMovie to DVD without losing quality? I have iMovie 10.0.5 and iMac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this problem? I have tried the apps BURN and DVD Creator for MAC. I need to finish this DVD asap and becoming more and more frustrated. Why would Apple give us iMovie and not provide us an app to burn it to a DVD and / or take away the iDVD?
Alicia McGinnisWhy is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see. -
I can´t remove or update iTunes on my computer since the file itunes.msi is missing. How can I fix this?
What version of Windows?
Are you signed into the computer with an Administrator account? -
I keep getting the message "unable to verify account information" how do I fix this? It happened out of no where and I tried re-entering the exchange info and it won't stop giving me the message...any ideas?!?
I already reset network settings like someone suggested, but still cannot get my exchange acct to work.I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris -
Hello! I use the VSCO preset that was easy to download and use right away a few months ago. This morning I did the same thing and it downloaded successfully but none of the presets are listed under the new VSCO folder I bought. How can I fix this? Does Lightroom have a limit on presets?
Hello! I use the VSCO preset that was easy to download and use right away a few months ago. This morning I did the same thing and it downloaded successfully but none of the presets are listed under the new VSCO folder I bought. How can I fix this? Does Lightroom have a limit on presets?
Maybe you are looking for
-
Issue with Correlation in 11g related to Number of Instances
Hi , I am working on the correlation sample application and i observed like correlation is working fine but it seems two instances are creating in EM console, As per my knowledge when we are working with correlation we should only one instance, Can a
-
Hi there, I got a BB 9320, then replaced it through the vendor for this same issue but it is still occuring. When using my phone, fully charged or not, the screen will go black and LED light is off for a 3-30 seconds mid task and the device becomes
-
Choosing block size for RAID 0 & Final Cut
Hi. I now have 3 500GB internal Seagate drives in bays 2/3/4 and want to make a striped 1.5TB RAID to use with Final Cut Studio 2. The help page talks about choosing a "large" data block size for use with video, but makes no specific size suggestion.
-
How to set the date and time format from Windows Server 2008 R2
Hi, I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal? Yoshika04
-
Quiz slides not to be counted in quiz summary at end - Captivate 4
I have created a course which has quiz slides at the beginning of the cours which I have marked to not be graded. These slides are knowledge checks and should not be graded nor be counted. Then I have quiz slides at the end of the course that I do