My ipad got disabled, saying "ipad disable connect to itunes"
my ipad got disabled, i don't know hot it happens it's saying "ipad is disable connect to itunes"
but itunes cannot connect to my ipad because it is protected with password...
what should i do? i need help, can someone help me,,, pleeeeeeease
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should be able to reset the iPad and resync your content to it
Similar Messages
-
HT1766 how to totally reset iPad when it says disabled connect to iTunes
my son got an ipad. it was never connected to my computer. he made a 4 digit password to lock and unlock. but when he changed the 4 digit number, after so many times of putting wrong number in, the screen on ipad says Ipad is disabled, connect to itunes. so I connected to my computer, it NOW SAYS on computer after I plug in, Itunes cannot connect to the ipad because the ipad is locked. you must enter your passcode on the ipad to connect to itunes....
BUT, ON IPAD SCREEN , LIKE I SAID, IPAD IS DISABLED MUST CONNECT TO ITUNES.. that is the only screen on.. I tried to shut off power..etc.. I DONT KNOW WHAT TO DO! no other screen will come uphttp://support.apple.com/kb/HT1212
-
IPad Air says iPad is disabled connect to iTunes and STILL not able to use it. VERY UNHAPPY
After uploading IOS8 on 9-17-14 my iPad Air says "iPad is disabled, connect to iTunes.". I have followed all the suggestions from Apple and tried to erase my iPad, but I am VERY UNHAPPY as none of these have resolved the problem. Apple, please provide the support when you have new downloads...
Apple are not involved in tracking/locating stolen or lost devices. Have you reported it to the police ?
Did you have Find My iPad enabled in Settings > iCloud ? If you did and you had iOS 7 installed on it then it should be harder to remove from your account, and the police could try locating it via http://www.icloud.com -
Ckian Trishan's ipad is disabled.it say's "ipad is disabled. connect to itunes." i did the suggested steps but it doesn't work. what shall i do?
If those steps didn't work then you will need to try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808 -
How do I unlock my ipad when it says it's disabled connect to itunes?
How do I unlock my iPad when it says it's disabled connect to iTunes?
You have to wipe your iPad, and restore as new. Everything you had on there is now gone, unless you had it elsewhere.
-
The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????
Maybe a reset would help, to be followed by trying the recovery again.
To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Then do the recovery.
If this doesn't solve it, I recommend visiting an Authorized Apple Service Center. -
i have entered the wong password on mi iPad 2 too many times and it says disabled connect to iTunes so when i plug it into the computer , iTunes says pad locked cannot sync until you unlock the iPad but i don't remember the password nor can i put it in
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore -
I need some helpful instructions on how to get my iPad back to normal because it says iPad is disabled connect to itunes. I've gone through the restoration process many times and it does not work. The iPad just seems to fail when its almost done restoring. Much help is needed please!
Hi LittleKritter13,
Thanks for visiting Apple Support Communities.
I recommend the steps in this article if your iPad does not complete the restore process:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
If the issue persists, the method in this article may also help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy -
on my ipad it says ipad is disabled connect to itunes but i try and connect it to itunes and says i needvto wright the password in the ipad first but cant help please
I have the same problem with my ipod touch ... but im trying to find a way to fix it without restoring it...
but one fix is to shut it down completely ... then press and hold BOTH the power button and the home button .. hold both of those 4 ten seconds .. then release the power button but still hold down the home button .. and then it'll show something that says "connect to itunes" once u get it connected to itunes , click the restore button ... BEWARE THIS WILL WIPE OUT EVERYTHING ON YOUR IPOD!!! IT WILL RESTORE IT BACK TO FACTORY SETTINGS , AS IF U JUST BOUGHT IT !!!!! then it should work fine again .. but u will lose all data on there besides the things you have synced with itunes already..
Thats y im iffy with doing this , im trying to find a fix where i wont have 2 restore it but i dont think there is 1 :'(
good luck tho
~sam -
HT201263 ipad saying ipad disabled connect to itunes
i have put in the wrong pin code for my ipad 3 and on the screen it is saying = ipad disabled connect to itunes.
i dont belive i have updated this ipad on my computer before so im not sure if it will find it ?????iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Cheers, Tom -
My son was trying to open my iPad and he entered the wrong password so many times. Now, the iPad is completely disabled. It says iPad is disabled connect to iTunes. I already did this several times on my laptop but nothing is happening. Is there anyone who can help please?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
when i turn on my ipad it say ipad disabled connect to itunes and i have it plugged into my computer but i tunes does not show any device shat do i do
You can try this first and see if it helps
iOS: Device not recognized in iTunes for Windows
If the iPad still is not recognized in iTunes you can try recovery mode. I hope that you have a backup that you can restore from.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
my ipad has a passcode but i forgot it and i tried many times and it says "Ipad is disabled connect to itunes" so i did that and it pops up and says "you must enter your passcode to access this itunes account"
THave you looked at this link http://support.apple.com/kb/HT1212
-
ipad is disabled, how can i un-disable it? The message on the iPad says connect to iTunes. nothing happens. what can i do?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
Dear experts I have a problem with the ecc orders I am using the standard order or. I have created an order in the ecc which is not moving to crm, i checked the queues at ecc side nothing was found. when i checked in smw01 bdocs are generated with ma
-
Photoshop Elements 10 organizer inoperable see Apple beach ball
Hello people, Problem with PS10 organizer, it doesn't work. I see the Apple beachball rolling. I'm running 10.8.2 (Mountain Lion) on my iMac, current on updates. Using iPhoto 11, current on updates. I've been using my PS8 to do my work, and saving it
-
Hi , <b>i am working on N-step Item level approval workflow. i am facing a problem. up to first level approval is working fine. when two approval come to picture , workflow doesn't work. my problem is , say for example. SC has two items, first item n
-
Dear sir, Can i delete P.R from system --pl tell me how to delete it so that it can not be visible in ME5A. - Pl suggest km
-
Hi All, What are the typical issues which one faces during FI AP-MM intergartion. Thanks Dev