My iPhone suddenly went down 3 days ago???? Was working fine in the a.m but

My iPhone suddenly went down 3 days ago???? Was working fine in the a.m but in the p.m CRASH!! Have tried to restore it 7 times but continually get various error messages starting " Itunes could not perform a restore due to an unknown error" The error message numbers varied from (1009), (1002), and (20000)!!!!!??????????
My iTunes version is up to date. I have performed all the trouble-shooting tasks including trying to restore on a different pc without success!!!
Please help.
Regards,
Ciaran

Thanks Allan for your helpful reply....Since I posted that question a UPS truck is, hopefully, winging its way to do a like-for-like swap...Thank God!!!!..so fingers and toes crossed now for a trouble-free life with my new iPhone!!!

Similar Messages

HT4061 Iphone suddenly turned off after it was working fine. How can I turn it on again?

Iphone suddenly turned off after it was working fine. How can I turn it on again?

Hi Bobgriff43,
If your iPhone will not turn on, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

2 days ago was working fine. Now click on icon and it doesnt open

Have uninstalled firefox then reinstalled. Did not work. Have no problem getting internet explorer or any website. This problem literally showed up overnight last Sat 3/7. Would like to get firefox back. Thanks

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks

Hi, i have purchased iPhone 5 about 15 days ago, its working well but only one problem that it has is that some time its losting signal and appear as no serves. would you please help me in this reqard. thanks

Well, it could be that your carrier doesn't have a signal when it looses its signal. You could try resetting network settings which might help - Settings/General/Reset/Reset Network Settings. You'll need to set up any wi-fi networks you connect too again. If you're still having issues, contact your carrier.
Good luck!

My apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to.. Help

my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...

Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke

Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup

My ipad is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini about a month ago

My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini

I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777

HT4628 i have mac book pro, it was working fine with my wi fi but today i found it does not show wi fi indication "on" so no internet working. please suggest me the solution.

I have mac book pro. It was working fine on my wi fi but today it doesn't show wi fi indication and my wi fi link is not mentioned in the list. but it shows other links which are not mine.
I reset my wi fi but no any result. but at the sametime my iphone is working alright on the same wi fi that means wi fi is ok. Please guide me !!!

Hey nondeplume,
I'd check out the following article and see if that helps resolve the connection issues you're experiencing on your MacBook Pro:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Hope that helps,
David

ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

I loaded mozilla 6 on my new laptop. it was working fine for a few weeks, but now will not launch at all. how to fix??

I loaded mozilla 6 on my hp laptop and it was working fine for a few weeks, but now it will not launch at all wheather I clip on the icon or type in the site. there is no message or warning, it just does not start up. I am a long time firefox user.

Hi Gamon,
Do you see any error message on your screen when you open up Acrobat? What happens when you open Acrobat?
Regards,
Rahul

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

A friend's eMac was working fine until the name of the administrator was changed incorrectly in Systems Accounts

I am trying to fix a friend’s eMac. It was working fine until the name of the administrator was changed incorrectly in Systems Accounts. Upon restart the computer failed to mount. I tried to reinstall Tiger and could not. The destination to do this install could not be found. While in Disk Utilities I tried to repair and then zero out erase the hard drive, this also could not be successfully done. The hard drive was working perfectly before the name change. I may try to load Tiger from the eMac onto an external drive and then hope to erase the eMac internal drive.
Thank you for your thoughts on this as it would be a shame to retire this trusted computer.
Nick M.

Hello,
Thank you very much for your attention to this. Yesterday I was able to get the eMac to install Leopard onto an external drive. I had hoped that once done I would be able to initialize or erase the content of the internal drive in Disk Utility, but was not able to do so, I only received error messages telling me my request failed. This was also true when I tried to create partitions on it. So in effect, the computer runs, but only from the external drive. I could not even find the internal drive while running from the external drive. Where is it? And the internal drive only occasionally shows up in Disk Utility.
As for holding Option and Alt, the internal drive did not show up.
And Leopard was running on the eMac when I lost contact with it. Again, all failed when a name of the administrator was changed, but was not properly done. Or something like this.
Is there anyway I can use Terminal to help reach the internal drive?
I realize I am asking a lot of questions.
And I thank you for your time,
Nick M.

Infragistics UltraWebListbar was working fine with the earlier version of the firfox. But it crashes after updating to version 12.

I am using infragistics UltraWebListbar to display list of menu in one of my page.
It was working fine with the earlier version of the firfox. But it crashes after updating to version 12.
Following are the few details from the stack trace
System.Convert.ToInt32(String value) +63
Infragistics.WebUI.UltraWebListbar.UltraWebListbar.getRenderer() +237

It's a third-party application, ask Infragistics support board. Maybe they have a fix or a dev version to fix your issue.

My nano 6th gen was working fine until the updates

My nano 6th gen was working fine until the updates now it's on the pc but not iTunes! I've uninstalled and reinstalled iTunes but nothing is working! Please help!

Here is an apple article that might help:
http://support.apple.com/kb/ht1925
i

I am having the same problem that Paul Birgy is having. It was working fine until the update.

I am having the same problem that Paul Birgy is having.   I can send email from my program but now the reciever cannot read it. Before the update my emails I sent from my program were readable by the reciever.

I send out invoices from Peachtree Premium Accounting 2005. I click on the email icon on top of page and it goes to Microsoft office outlook 2007. It shows as an attachment and in the message it tells the receiver they need adobe reader installed in their computer to read it.   It was all working fine until the last update for adobe reader.
Now they get error message.   Adobe Reader could not open "Invoice #106.PDF" because it is either not a supported file type or because the file has been damaged (for example it was sent as an email attachment and wasn't correctly decoded.)
This started March 3, 2010. Since then I have been faxing out of the Peachtree program. That still works fine.
This problem seemed to start right after one of the updates. I was told to try and reinstall Adobe Reader. I have tried that twice and still have the same problem.
To the best of my knowledge I have not had any problems with Peachtree.
Cathy
Date: Tue, 25 May 2010 14:40:25 -0600
From: [email protected]
To: [email protected]
Subject: I am having the same problem that Paul Birgy is having. It was working fine until the update.
Sounds like either
A. Something in your accounting software is corrupting the file or;
B. Something in your email is corrupting the file (some email providors use compression to make the transfer faster which can mess up a PDF).
What hapens when they try and open it? Do they get an error message? If so, what is it (this matters)?
At any rate, it's doubtful that this is a Reader issue but give us some more detail and maybe someone can help here.
>

My iPhone suddenly went down 3 days ago???? Was working fine in the a.m but

Similar Messages

Maybe you are looking for