My iPod 5th Generation was working perfectly fine and within the next ten minutes, it had shut off and won't turn back on

I was using my iPod and it was working fine and then I locked it and it randomly shut off. This has happened to me in the past, and I would just do the home button and lock button to manually reset it. Unfortunately, my home button is now breaking. I tried connecting the USB to my computer and it won't connect that either. Any ideas on what to do? I'm almost always in a wi-fi zone so this is usually my main source of communication.

Turn on without Home/Power Button

Similar Messages

  • My ipad was playing music then just shut off, it won' t turn back on and the battery was not dead. Never happened before, what do i do?

    I was playing music and all the sudden my ipad turned off and will not turn back on.THe batterie was at 80% and this has never happened before, it still won't turn on even when charging
    WHat do i do?

    Does a Reset work? Mostly unlikely! [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
    See here http://support.apple.com/kb/HT1808
    Note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.

  • Why would my iPhone work perfectly fine but when it gets to 48% it randomly shuts off?

    Why would my iPhone randomly shut off at 48%? Then say its at 1%. The only way I can use it is if it ha more than 48% battery

    This is usually the feature of faulty battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing. If there is Warranty or AppleCare this will be covered.

  • I pod touch 5th generation was working fine died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue if it on and the apple logo is about to appear but it never does nor does anyother picture. If i hold the

    I pod touch 5th generation was working fine (Not sure what the last ios i downloaded was it should be ios 8 or higher). The battery died so i charged it. Now that it is charged when i hold the power button the screen turns dark blue as if it's powering on and the apple logo is about to appear but it never does nor do any other type of images on the screen. If i hold the home button Siri will say "Siri is not available please connect to internet" but there is still no image on the screen. I've tried holding down the home and power button it restart it but doing this just gave me the same results. How do i fix this problem? What's wrong with my i pod?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer  keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

    hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer  keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

    https://discussions.apple.com/message/23791369#23791369
    https://discussions.apple.com/thread/5325044?tstart=0
    more
    https://www.google.dk/search?q=restore+iphone+error+29&oq=restore+iphone+error+2 9&aqs=chrome..69i57j0l5.4603j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

  • Hi everyone,I have an Ipod 5 and its not sliding.it was working perfectly fine till last night.It was charging and  i was texting,so then my mom called me then when i came back its stop sliding(i cant get in)HELP!!!

    hi everyone,I have an Ipod 5 and its not sliding.it was working perfectly fine till last night.It was charging and  i was texting,so then my mom called me then when i came back its stop sliding(i cant get in)HELP!!!

    If not successful try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

    I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

    I tried just about everything and finally brought my Ipod touch to the apple store.  The tech installed ios 4.3.5 but still no WIFI.  He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
    The "solution" was bizarre.  On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
    I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting.  It worked!  I must admit the fix does not work reliably, so I may still go for the exchange.  Still, I am now convinced that it is a hardware problem.    i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon.  The chilled component would work long enough to identify what needed replacement.  Perhaps something similar is happening here.
    For anyone wanting to try this, I found it more convenient to place the back of my ipod on a  frozen cold pack until the wifi is restored.  It seems to happen when condensation forms on the face.  I used a towel to wipe off the moisture so as not to add to the problem.

  • TS1398 My ipod touch (geration 4) wont load my internet it just keeps giving me the loading sign. It was working perfectly fine untill yesterday for some random reason and now it wont load at all. What can I do to fix it?

    My ipod touch (geration 4) wont load my internet it just keeps giving me the loading sign. It was working perfectly fine untill yesterday for some random reason and now it wont load at all. Again it just gives me a loading sign and the wifi symbol wont come up.

    Does the iPod connect to other networks?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My Ipod shut off and wont turn back on even when its been fully charged, and it was working perfectly fine 4 hours ago. What do I do?

    I don't know what happened as it was working perfectly fine, and all of a sudden it shuts off and even when I pressed down on the on and home buttons at the same time, it wouldn't turn on. I don't know what to do.

    Try here:
    iPod touch: Hardware troubleshooting

  • Ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may

    ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do

    I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do

    You can try drying it out internally by wrapping the unit in a paper towel and putting it in a bag with a dessicant safe for electronics such as silica gel pellets, or failing that in a bag of dry, uncooked rice, for a few days. It's very probable that it's been permanently damaged, but it's possible that if you dry it out, it may then work. If after a few days in the bag it still has problems, then you'll need to pay to get it exchanged (by Apple) or repaired (by a third-party repair service) or buy a new iPhone.
    Good luck.

  • I have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

    i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Malvinfromny wrote:
    ... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • My iMessage on my Mac book pro is saying that I have no network connection and it won't let me sign in, it was working perfectly fine at first then one day after updating it just stoped working.

    My iMessage on my Mac book pro is saying that I have no network connection and it won't let me sign in, it was working perfectly fine at first then one day after updating it just stoped working.

    I have network connection and it still says I don't, I've restart my computer mulitple times everytime it says I don't have connection.

  • TS3899 I can't access my yahoo emails in the email in the iPhone 5c it was working perfectly fine earlier an now it quit

    I can't access my yahoo emails in the email in the iPhone 5c it was working perfectly fine earlier an now it quit

    I have a similar problem. I was receiving email on my iPhone for months, and then it quit working. When it quit working, I continued to receive emails on my iPad even though the server and port settings were exactly the same between the two devices. I tried deleting and re-adding my email account on the iPhone and restarting my iPhone, but I still couldn't receive email on the device. The only way I could get email to work on my iPhone was to switch to using a POP3 email server (this is the server that my phone auto detected when I re-added my email account) -- the server that was working previously and that is still working on my iPad is an IMAP email server. Since the IMAP server settings continue to work on my iPad, it seems that the problem is with my iPhone and not my email server.
    iPhone 5s Version 8.1.3 (12B466)
    iPad 2 Version 8.1.3 (12B466)

  • HT201441 Why is my iPhone asking for activation if it was working perfectly fine?

    My phone was working perfectly fine but when I turned it on it said activation required, it asked for my Apple  ID AND I typed it in and it said "could not activate iPhone"! Why did this randomly happen?

    Did you recently update the iOS version or restore from backup?
    What is the exact complete text of the error message you are receiving?

Maybe you are looking for

  • I get a runtime error when I try to open itunes, any help?

    I get a runtime error when I try to open itunes, any help?

  • Changing Resolution Settings Within Project

    Hi Guys, Ok, here's my problem..... I have captured my footage at 1920 x 1080 25fps and 48Khz with my Canon DSLR and imported it into my FCP project.  I deliberately created my sequence settings at 1280 x 720 25fps as this was to be the output format

  • Buying old imac g4 - price?

    Hello there, Wondering how I can find out how much I should pay for an iMac g4 17" ? It has been treated well as far as I know, the owner is a friend. It has been sitting in a box a lot and I will get a chance to test it first. Wondering what tests I

  • How to display all the rows in a JTable ???

    Hi, i want to display blank lines in a JTable if there is not enough rows to fill in it. For the moment, there is nothing in the JTable if i have nothing in my tables. Where am i wrong ?? Thanks !!

  • How to track repair status.

    I sent in my newly purchased S230U for repair to a depot (flextronics?) located in Newmarket, Toronto, Canada.  I was given the "case number" of A0XXFVH.  Now, how do I track the status of the repair?  EasyServ website does not recognize the case num