My ipod nano wont turn on and wont charge !!!
it was working very well , when i wake up i tried to turn it on then nothing happened i thought the battery is empty . when i plugged it in with the charger it doesn't turn on and doesn't even start charging . same when i tried to plug it in my computer with the usb cabel .. i can't fix this problem tried every thing what should i do ?! and please if the problem is my bettary . how can i know where i replace my my bettary in egypt ?? thank you ...
Hi there Abderhman mosbah,
You may find the troubleshooting steps in the article below helpful.
iPod won't turn on
http://support.apple.com/kb/TS1383
-Griff W.
Similar Messages
-
Pls help me my ipod nano wont charge even if i use other laptop or pc . The battery notification tells its full charge but when i remove my ipod its still not charged
Is it not charging at all? Did you try to reset? If YES to both, request for a replacement of the ipod. Battery or the unit itself is defective. Cheers!
-
Ipod nano keeps turning on and off
My ipod nano keeps turning off and on automatically and when I push a button once its on then it freezes, and when I reset it then it starts turning on and off again....what do I do someone please help me
Hello Mo0nangel,
Welcome to Apple Discussions.
First, try updating the iPod software. Follow the steps in this article:
Updating iPod software
If the problem persists, you may have to restore your iPod:
Restoring iPod to factory settings
Unfortunately, restoring will wipe your nano clean of all songs and photos.
Gary -
My ipod nano will turn on and play but the viewing screen will not come on and I cannot access the information to select different playing options. It glows white background light then goes dark for the entire time I am using it. Any suggestions?
I had the same problem. Someone here told me to make sure my earbuds were in securely. Push until they click in place. It solved the problem. The music still plays even though the screen goes to sleep. Hope this helps.
-
Hi, my ipod nano when turn off miss batt charg , plz help
hi dear
my ipod nano when turn off miss batt charg , plz help menastaranfromcrowley wrote:
for example : my ipod have full charg , i turn off my ipod , after 3 days my ipod doesnt turn on , and show batt doesnt charg while i dont use it
The iPod Nano battery will not charge unless you connect it to your computer, to an AC outlet with a wall adapter, a charging dock or an auto adapter/dock.
You battery is always discharging when idle or shut off. You should read the manual for your model iPod Nano regarding batteries - iPod Manuals
iPod Models -
HT1320 my ipod nano wont charge and it freezed when i started it
hello am joao i brought my new ipod today and once i started it up my ipod just freezed and i dont know why
You have 14 days to return the iPod Nano w/no questions asked. Plus you have 30 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support. Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
-
My Ipod Nano basically switched the function of turning on/off when i plug in the headphones. I found a way to beat this by plugging in my headphones an even number of times, but when I do this, the Sleep/Wake button is completely rendedered useless. As soon as the screen turns off I cannot change songs by double clicking, but I am able to change volume. The same is for trying to sleep the screen. I have tried factory resetting the ipod and using different headphones but the problem seems like it is not affected by these steps. I also tried to clean out the headphone jack and the result is the same.
Take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you.
-
When i plug the nano in, it says please wait batteries too low. so i wait.....and nothing. this really make me frustrated. i just got it and im anxious to use it .
please help me! also i have three rolling stones songs but only one of them shows up under the artist. the others will show up only in the songs list. what can i do to fix all these things??????
HP media center PC m7350n Windows XPTry these.
My iPod won't turn on.
iPod battery doesn't charge.
Make sure the Stones songs have info in the album field in iTunes. The iPod currently has a bug where songs that don't have any info entered here won't show under artists. -
My IPOD NANO keeps turning off and on by itself
My ipod keeps turning off and on. I don't know how to make it stop doing that? I can click through even start to listen to a song but then it cuts off and on and it just does that until the battery dies. Please help??
sounds wierd. Try this:
http://www.apple.com/support/ipod/five_rs/ -
my ipod got a little wet so i dried it off & put it down for a mnute to dry but the battery ran out so i pluged it in to charge (in the ame place i always charge it) but my computer cant seem to charge it cause im nan keeps flashing dead!
what do I do???
nano Windows XPmy ipod got a little wet so i dried it off & put it
down for a mnute to dry but the battery ran out so i
pluged it in to charge (in the ame place i always
charge it) but my computer cant seem to charge it
cause im nan keeps flashing dead!
what do I do???
nano
Windows XP
Your battery probably short circuited when the iPod was turned on while the battery was still wet. Leave it alone for a week or so, and then try to charge it.
CG -
My iPod Nano wont turn OFF, yes i know how to turn it off, but its not turning off. im charging it no to see if that makes a difference....please help!
iPod Nano Windows XP
Charge it until the battery appears full, then it should turn on...lol, my idea worked!!!Wow, ***. all of a sudden it worked again. THANK YOU BABY JESUS.
-
My ipod has just turned off and wont come back on
my ipod has just turned off and wont come back on but i know it had a good amount of battery left and if i plug it into my computer or docking station nothing happens please help...
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch 4g turned off and when i try to turn it on it says its not charged. so i charge it and the apple screen comes up but stays frozen like that for a really long time, and then it just goes back to the "needs to be charged" screen. please help!
- First try resetting the iPOd. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Next connect to a computer and restore the iPod if theiPod appears in iTunes.
- Next see if placing he iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
my ipod nano wont come on at all can u change tje battery urself
What have you tried so far in terms of troubleshooting? After leaving the iPod connected to an external power source to charge for at least 30 minutes, have you tried resetting it?
How to reset iPod
And yes, you can swap the battery out yourself.
B-rock -
My ipod nano wont let me download video i downloaded off of my computer
my ipod nano wont let me sync my videos on my computer
Not all video format downloaded from iTunes is compatible with ipod nano. Make sure that the file extnesion is mp4 or any quicktime formats. If not, create a version on these format using iTunes or convert using a third party software. Cheers!
-
please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?
Hey saintbless,
Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Will not turn on or screen remains dark
- Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
- If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
- If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
- If the screen remains dark and will not turn on, then your iPod may need service.
Thanks,
Matt M.
Maybe you are looking for
-
Issue with PO release (multi level approval)
Hi, Need help regarding PO release. I am working with 4 level approval process. Information: it is sequential release as I can see in workflow log, a new workflow gets generated for next level only after previous level executes the workitem. Facing
-
I have had my iMac for about a year and have just found out that I am moving to the UK from the US. I want to take it but I don't want to damage it. Can I just get a replacement power cable in the UK (like the international switchable plugs for iPads
-
No Form Fields Detected - Adobe Pro X
Hi all, Having a very frustrating time today and probably missing something simple. I have created a new PDF Form and also edited a previous Form that I have used. However, when uploading them into our software (proprietary), we get the error "No F
-
Is it possible to unload a class?
Suppose I take a classloader and load a class. Then I set my classloader to null and get rid of any objects of it that I've instantiated. Can that class be garbage collected? I'm thinking that it probably isn't possible. Even if you can get rid of al
-
Solaris 10 DS5.2Q4 with SSL/TLS with Replicaton
I have been working on configuring DS5.2Q4 on Solaris 10 11/06. I have been successful with Gary Tay's documentation (a few changes for new syntax and svcs). My current configuration only has one ldap server and using self signed certs. I would now l