My Ipod plug into stereo, some how the stereo not work and burn the battery, its make my ipod can't turn on at all, if I need to repair it how much its cost, do you think?

Hi, I put my Ipod into the stereo, some how the power of the stereo burned out & make my ipod not work anymore. If I plug my ipod into computer its not on and the battery feel very hot, so if I send it out to fix, how much do you think its cost? And how do I check online to see what generation I was bought? I bought it online with Apple. Thanks.
Tran Thai.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

HT201412 after loading in the new 6.1 software on my iphone4 is locked on the plug into Itunes pic.then "iphone could not be restored. The device isn't eligible for the requested build

after loading in the new 6.1 software on my iphone4 is locked on the plug into Itunes pic.then "iphone could not be restored. The device isn't eligible for the requested build

Any Error messages or Alerts...?

IPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'

iPhone 3G plugged into PC(Windows 7) 'USB is Not Recognized' and unable to restore; stuck on 'Connect to iTunes'
I was in the process of putting another firmware for my iPhone(an .ipsw via. itunes) and the house had a power cut. The computer was in the middle of restoring the iPhone but never finished. The apple logo came on and then came onto the 'connect to itunes' screen. My sim card was in but there is no option to slide for emergency. When I Plug it into my computer, a message pops up saying that the 'USB Device Not Recognized', I've tried to plugging my iPhone into my laptop and other Computers but the same message occurs (all windows 7). Other articles say that the error is with the iPhone, I need help!! Can anybody offer some advice on what to do?
oh yeah, bit tight so not willing to spend any money;-)

Apple support:
Network Printer Troubleshooting
Reset Printing System

I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

Hi i have an iphone 5 the screen in broken the lock button is not working and now the phone wont charge do u think warranty will cover my phone for a replacement or no?

HI so to be clear
screen cracked
lock button isent working
wont charge
do you think apple will still cover this under a replacement warrenty?

Depends how that happened and how long the warranty is still left .....u can replace the screen ...and does the home button work? If so then go to settings> general> accessibility >assistive touch( it has many functions like locking the screen ,screenshotting just by touching the screen
Hope this helps

How do u fix the keyboard not working issue on the new ios7

how do u fix the issue of the keyboard not working on the ios 7 OS? i experieced it on my MacBook Pro recently.

Briss wrote:
how do u fix the issue of the keyboard not working on the ios 7 OS?
iOS 7 is not a MBP OS.
i experieced it on my MacBook Pro recently.
Exactly what did you experience?
Ciao.

Why does the installer not open and finish the install after it downloads?

I do not not understand why the downloader will not open and finish the install after it downloads - all I get is more advertising junk trying to sell me things I don't need.

The Adobe Download Assistant. I took a screen shot, and it is just kind of stuck here.

Ive forgoten my password for my ipod alredy tried dfu and to restore not working and when i tried th dfu my ipod whent off know wont come back on the battery isnt low??

help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

On startup I get an Alert dialog that tells me that some security feature is not working and I should correct things in the Firefox profile. What's going on?

On Mac OS X 10.6.6, MacBook Pro.
When I launch Firefox I get an Alert that says,
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
If I click OK, it goes away and Firefox seems to work fine, but I don't like this situation. Anyone know what this is?
I've trashed the old Firefox (which left a few dynamic libs open and I had to restart to empty the trash) and I installed the latest Firefox (3.6.14), but the problem remains. I found a profile for Firefox in the /Library/Cache folder, but I don't know what to do with it. My disk has plenty of room.
Any help or pointers appreciated

There are a few possible causes of that error, for details on fixing it see https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Why does the earphone jack on the HPdv7 NOT work when on the notebook stand and using replicator?

My Pavilion dv9815nr let me plug my earphones into the pc while it was on the desk extender or stand, and the sound of the speakers would be cut out -- which was especially a good idea late in the evening and helped keep peace in the family. I liked this VISTA machine very much and was quite happy with it for not quite 3 years. Unfortunately, the Optical drive gave out, or at least the BUS died and the techies recommended the purchase of a new machine since a repair was apparently expensive. In order to stay closely to the concept of a full keyboard laptop using a notebook stand with wireless keyboard and mouse, I bought end March a Paviliion dv7 as a replacement machine. Other than a series of minor mishaps, most of the problems were encountered with the peripherals and I am on a second wireless keyboard, mouse and replicator. Also a number of odd occurrences related to audio were fixed by obtaining the proper drivers. but now I have encountered something that appears to be simply sloppy design. When this laptop is in use on the notebook stand and linked to the replicator, the earphone jack on the left side of the PC is dead. The jack works fine and cuts out the speakers when the USB lead for the replicator is removed. There is a very impractical solution to the problem and that consists of plugging the earphone mini-plug into the jack located on the replicator. Since the replicator has a niche location on the back of the notebook stand, this is not a very practical solution. Any good ideas to get around this?

I went through the installation where the bar shows the percentages downloaded and installed. Once it shows 100% it asks me to click Finish. I do. Then I go to yahoo to check and it continues to show that the plugin is missing and that I need to download Adobe Flash which I thought that I just did. Am I missing something in terms of installing??
Kent M. Farrar

Updated the iOS and now my iPhone 4 will not work and shows the usb with an arrow to iTunes. iTunes on my computer does not recognize it and will not sync it!! I hate being with out my iPhone

I recently updated to the new iOS through my computer with my iPhone 4 pluged in via USB. It has shut down my phone and just shows the iTunes icon with the USB cord to plug in. When I try to sync my phone with the computer iTunes does not recognize it!! So now my iPhone is useless and I really need it back to working order!! Please help......Hilda

Hello Hilda Louise
Start with the article below to get your iPhone to be recognized in iTunes again. Then you will probably need to restore it to get it back up and running.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

Color adjustment on Multi-cam clip in 10.1 not working and crash the app

In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
Anyone having similar issue?
Any solution?

In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
Anyone having similar issue?
Any solution?

My Macbook Pro runs VERY slow when unplugged. The battery charges and runs ok. Ran an SMC reset (no success), Safe mode (did not work), and hardware check (came back ok). What can I try next to fix this?

Hello all,
I am new to posting on this forum but I really hope that someone out there can help me out. I have a 13" MacBook Pro, 2.53 GHz Core 2 Duo, 4GB 1067 MHz DDR3, running OSX 10.6.8. My problem is that when I unplug the laptop form the charger and run it on the battery, the computer becomes unresponsive to any commands at all. It basically really slows down to a crawl. Even when rebooting it will take 5-10 minutes or more to do so. The odd thing is, when it gets plugged back in while any of this is going on, within a minute or two it works perfectly. It has been in a mac authorized repair shop for 7 weeks and has had a new logic board and a new hard drive replaced. The battery was tested and charges fine, holds a charge when unplugged, and the system profile shows the battery at Normal. Recently, many knowledgeable mac enthusiasts gave me tip that might help. Here is what I did: Ran an SMC reboot (no success), rebooted the computer under safe mode then unplugged it to test (no success), and ran a hardware test on the install disk (showed hardware ok)
I am at a loss as to what to do next. It has become impossible to use this laptop for my classes when it is unplugged. I am about ready to just go buy a new one, and call this one a goner.
I am hoping someone reading this can help with any other ideas on its problem. Help? Anyone?
Steve

LPBassman,
since the tech in your IT department was able to copy your daughter’s data from her MacBook Pro’s internal disk, I’d suggest completely erasing the internal disk (using Disk Utility in Recovery mode, reformatting it with a “Mac OS Extended (Journaled)” filesystem), reïnstalling its original version of Mac OS X (either Snow Leopard from the grey Mac OS X Install DVD if it originally came with two grey DVDs, or Lion via OS X Internet Recovery if no grey DVDs originally came with it), running Software Update to get it to 10.6.8 or 10.7.5 respectively, reïnstalling Mavericks, running Software Update again to get it up to date, and finally restoring your daughter’s data.

Nokia weather not working and show "The latest for...

Hello every one,
I'm in Egypt and I haven't been able to load a weather forecast for in Nokia Weather, it show "The latest forecast is not available." why?

hey , member in nokia support discussions in arabic told me to update software by nokia suite or software update in mobile , but I can't do that now because the Internet has slow, so if you do that tell me pleas and thank you

My Ipod plug into stereo, some how the stereo not work and burn the battery, its make my ipod can't turn on at all, if I need to repair it how much its cost, do you think?

Similar Messages

Maybe you are looking for