My Ipod's screen doesn't start.

Hi,
I have an Ipod nano 6th generation (with the touch screen) and one day it decided for no reason to not start. First I thought the battery was dead. But after 6 straight hours of recharge from a wall plug, it wouldn't start anyway. I tried to plug it onto my computer and Itunes could easily recognize it and sync it. But the screen of my Ipod wasn't turning on at any time even if my computer detected it.
I tried to restore it, but the problem stayed and I tried many solutions there were on the little booklet  and on the Apple's website (like pressing the power button and the ''-'' button for 6 seconds). Also, I searched throughout the forum but I didn't find any people who had the same problem.
I have an Acer computer with windows 7, but I don't think the problem comes from my computer because it did its job very well, it is just that the screen doesn't start at all.
So, should I return it to the store where I bought it or there is still something to do for that?
Any help would be very appreciated.
Felix

oh and by the way, the day before it was working very well and I didn't broke it up. I mean I didn't overheated or dropped water on it, etc. It just started to not work for no apparent reason.

Similar Messages

  • TS2771 my ipod touch screen doesn't respond  but only if tap what i want and tap it twice again. it like tap and a double tap

    my ipod touch screen doesn't respond  but only if tap what i want and tap it twice again. it like tap and a double tap

    I think you have an Accessibility feature turned on. Triple click the Home button and then try to go to Settings>General>Accessibility and turn all Accessibility features off. To scroll you may have to use three fingers. If proem see:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • Ipod touch screen doesn't work

    The Ipod is not broken, cracked and still seems to operate. However, I can't seem to access my Ipod touch because the screen doesn't react to my touch ...  any fixes for this ?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • IPod Touch G1 doesn't start after update

    I manually updated a friend's iPod from 1.1.? to 2.2.1 using the "Shift/Options + click Restore" method, but when the update started I briefly got the "Connect to iTunes" picture with a tiny white line across the screen.
    The screen went white and iTunes displayed an error, which translated in English is "UNKNOWN ERROR 1403", and it featured an Help button that took me to a broken link.
    I reset the iPod with Lock+Home, but after the screen went black nothing happened. I tried to use DFU mode but my computer doesn't detect it.
    Here is the debug log. I have removed from it the unused network cards.
    Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
    Sony Corporation VGN-FZ21M
    iTunes 8.1.1.10
    QuickTime 7.6
    FairPlay 1.3.6
    Libreria aggiornamento iPod 8.1d19
    Driver CD 2.1.0.1
    DLL driver CD 2.1.1.1
    Apple Mobile Device 2.4.1.7
    Driver Apple Mobile Device 1.40.0.0
    Numero di serie di iTunes D1209*603
    L'utente attuale non è amministratore.
    La data e l'ora locali sono 2009-05-11 16:08:38.
    iTunes non funziona in modalità sicura.
    Informazioni sull'apparato di visualizzazione:
    NVIDIA, NVIDIA GeForce 8400M GT
    ** Informazioni plugin esterni **
    Nessun plugin esterno installato.
    ** Test connettività di rete **
    Informazioni adattatore di rete
    Nome adattatore: {7A52A3B2-2D6E-47D3-9E21-35F2ACA7ECA5}
    Descrizione: Intel(R) Wireless WiFi Link 4965AGN
    Indirizzo IP: 192.168.1.64
    Maschera di sottorete: 255.255.255.0
    Gateway di default: 192.168.1.1
    DHCP abilitato: Sì
    Server DHCP: 192.168.1.1
    Assegnazione ottenuta: Mon May 11 16:06:25 2009
    Scadenza assegnazione: Mon May 11 16:09:25 2009
    Server DNS: 192.168.1.1
    192.168.1.1
    Connessione attiva: LAN Connection
    Connesso: Sì
    In linea: Sì
    Utilizzo modem: No
    Utilizzo LAN: Sì
    Utilizzo proxy: No
    Supporto SSL 3.0: Attivo
    Supporto TLS 1.0: Attivo
    Informazioni firewall
    Windows Firewall è attivo.
    iTunes è abilitato in Windows Firewall.
    Tentativo di connessione al sito web di Apple riuscito.
    Tentativo di connessione ad iTunes Store riuscito.
    Tentativo di connessione sicura ad iTunes Store riuscito.
    Tentativo di collegamento sicuro al server di attivazione di iPhone riuscito.
    L'ultimo accesso al negozio è stato il 2009-05-11 16:04:46.
    ** Test connettività iPod/iPhone **
    iPodService 8.1.1.10 attualmente funzionante.
    iTunesHelper 8.1.1.10 attualmente funzionante.
    Apple Mobile Device service 2.12.36.0 attualmente funzionante.
    Controller USB (Universal serial bus):
    Intel(R) ICH8 Family USB Universal Host Controller - 2830. Il dispositivo funziona correttamente.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831. Il dispositivo funziona correttamente.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832. Il dispositivo funziona correttamente.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834. Il dispositivo funziona correttamente.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835. Il dispositivo funziona correttamente.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Il dispositivo funziona correttamente.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Il dispositivo funziona correttamente.
    Controller host FireWire (IEEE 1394) verificati.
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Il dispositivo funziona correttamente.
    Dispositivi più recenti al momento non collegati:
    iPod touch eseguo versione firmware 1.1.5
    Numero di serie: 1B739*W4N
    ** Test connettività iPhone/iPod Touch **
    Nessun iPhone o iPod rilevato.

    On the original computer, using the correct account the iPod is tied to, purchase and download the update.
    After you have the download then do the install.
    You're making it a two step process since that seems to cut down on problems.

  • Help with ipod video, screen doesn't work

    My ipod started acting weird when I updated the ipod software. My screen will freeze, but it's not black or white, it shows the "Do not disconect" sign but with a bunch of little color squares all over the screen. I've tried everything, restore it, reset it, everything and as soon as it turns on, the screen goes like this.
    can anyone help me?
    thanks!

    Try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store.

  • RTorrent+Screen doesn't start properly from systemd

    I decided to finally upgrade my system from init.d to systemd.
    Pretty much everything went smoothly except my rtorrent+screen startup.
    I'm using mostly the ruTorrent webui for controlling rtorrent. I'm using a service that starts rTorrent in a detatched GNU screen.
    This is my problem, when I start the service, rtorrent is just king of sleeping and not responding/doesn't create a SCGI socket I use to connect my webui to the rtorrent client.
    If I attach the screen the problem goes away and rtorrent resumes normal operation. If I run the exact same commands through a shell, it also works perfectly.
    I've also tried to run a basic screen as a service with rtorrent in my ~/.screenrc .
    Can anyone help? I've got no idea how to do debug this more than checking so that rtorrent and the service are running.
    This is my service:
    [Unit]
    Description=rTorrent
    [Service]
    Type=forking
    ExecStart=/usr/bin/screen -d -m -S rtorrent /usr/bin/rtorrent
    ExecStop=/usr/bin/killall -w -s 2 rtorrent
    [Install]
    WantedBy=multi-user.target
    My systemctl status output:
    rtorrent.service - rTorrent
    Loaded: loaded (/etc/systemd/system/rtorrent.service; enabled)
    Active: active (running) since Thu 2013-01-24 21:50:10 CET; 54s ago
    Process: 1130 ExecStart=/usr/bin/screen -d -m -S rtorrent /usr/bin/rtorrent (code=exited, status=0/SUCCESS)
    Main PID: 1131 (screen)
    CGroup: name=systemd:/system/rtorrent.service
    1131 /usr/bin/SCREEN -d -m -S rtorrent /usr/bin/rtorrent
    1133 rtorrent
    Jan 24 21:50:10 Laptop systemd[1]: Starting rTorrent...
    Jan 24 21:50:10 Laptop systemd[1]: Started rTorrent.
    ps -aux | grep rtorrent output
    root 1131 0.0 0.0 15560 1008 ? Ss 21:50 0:00 /usr/bin/SCREEN -d -m -S rtorrent /usr/bin/rtorrent
    root 1133 0.0 0.1 201528 5172 pts/0 Ssl+ 21:50 0:00 rtorrent

    This works for me, YMMV:
    /etc/systemd/system/screen.service
    [Unit]
    Description=Detached screen session
    After=network.target
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    User=tomk
    ExecStart=/usr/bin/screen -dm
    [Install]
    Wants=network.target
    WantedBy=multi-user.target
    ~/.screenrc
    screen -t rtorrent 5 /usr/bin/rtorrent

  • IPod Touch Screen Doesn't Respond

    I've Had my ipod touch 3g for about 6 days now. Everything was going well but after i synced my ipod touch, my screen just stop respond. I've tried restoring it many times and its just fail. What should i do? Could i go to the Apple store and get a new one?
    Message was edited by: iKanji

    Hi iKanji,
    Is the screen stuck at a sync prompt? As I've had this happen with my iPhone many times in the past.... It's a strange predicament that you can get into and I don't now the cause...
    At times I try to connect and disconnect my device from the dock connector until the device's OS realizes that one of the jobs are stuck and it reboots that prompt. Then all is fine.
    Again this issue was with my iPhone and it was a lot worse before the 3.1.2 update. It happens very rarely now, and does come back to life once the OS of the device realizes that this is occuring. Until then, the screen and power buttons are totally useless..
    Very frustrating, but this is the only solution I've seen work for me.
    Good luck and let me know if this helps.

  • Blue flashing screen - doesn't start up

    I just had new RAM replaced on my iMac due to faulty RAM under waranty, and everything seemed to be working fine. I downloaded some updates today and restarted the computer. Now on start up the computer loads to an alternating blue screen and won't load.
    When I restared the computer, I had just completed a back up, and left the external hard drive attached. Could this have created a problem?
    I have tried to do the basic troubleshooting start ups but have had no luck. Do I need to do a reinstall off disc? If I do, do I loose everything that's on the hard drive?
    Any suggestions on what could be the problem?

    Hello s:
    Welcome to Apple discussions.
    I would take the computer back to whoever installed the RAM (under warranty). From what you posted, nothing you did should have caused a problem.
    When I restared the computer, I had just completed a back up, and left the external hard drive attached. Could this have created a problem?
    I seriously doubt it. My external drives are always connected.
    Before you do anything else, I really do think that whoever replaced the RAM should fix the problem for you. There could, of course, be something else, but that is a good place to start.
    Barry

  • My iPod touch screen doesn't shut off. The auto lock is set for two mintues, and everything else is working fine. I've noticed it only fails to shut off when in the music screen. How do I get the screen to shut off without using the lock button?

    Please help. This is really annoying and it runs my battery down. My auto lock is set to two minutes. I've checked several times. Thanks.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipod updater doesn't start

    hi
    sorry for my english
    When I want to start the ipod updater, it doesn't start. What I've got to do?

    Are you getting any error messages when you try to start up the iPod Updater? Include any error numbers that may accompany an error message as well.
    Or, do you simply double-click on the iPod Updater and it doesn't even load, or nothing happens?
    -Kylene

  • Satellite L670 - screen dosen't "start"

    I'm trying to fix the named laptop. The problem is that screen doesn't start (remains blank) when I press the power button. I can hear the fan is turning and if I put a dvd/cd in the drive i can hear it turning. The problem occurs randomly and last for a couple of days then i can start the laptop normally, windows 7 loads normally and the only problem is overheating. However on the next switch-on again the same problems.
    I have tried to remove the battery and power cable and pressing the start button for 1-2 minutes trick, but it doesn't seem to work. When it did load i have scanned it for viruses and hardware problems (with various tools but nothing was found). I used slim drivers program to update some drivers but again no result.
    I have tried to connect it another monitor but again both screen remained blank.
    What could be the problem?
    Satellite L670 (European model)

    You mentioned the overheating problem.
    I guess this might be the main reason why the notebook does not work properly.
    The high internal temperature may affect the internal parts like graphic card, RAM, motherboard as well as CPU.
    I cannot say for sure what part might be the troublemaker but in my opinion its not display issue.
    In case of display problems, you should be able to use the notebook in connection with external monitor but obviously this isnt possible
    The RAM replacement is not very tricky it could be worth to test new RAM modules but this is just one possible troublemaker
    There is no warranty that after RAM replacement, the notebook would work flawlessly.

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • TS1286 My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??

    My screen had a black out and since then, my ipod touch is not getting started. it just shows ' connect ipod to itunes'. Even after doing that, my Itouch doesn't appear anywhere in Itunes. Help !! ??

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen

    Music doesn't start when selected from playlist have to push pause then start. Always playing one track behind what is on screen as my I-pad worksorks fine

    Same problem here, since upgrading to IOS-5.  Whenever I try to shuffle or play a genius mix (or even simply play an album) the iPod will skip the first one or two songs, play one song and then 'crash'.  I say 'crash' because it selects the next song and then nothing happens - the player isn't paused, and it appears to think it's playing, but the time bar doesn't change and no sounds come out.  Occasionally I've noticed the album artwork is wrong too.
    Rebooting does NOT work - I've tried it a number of times.
    Is this just an iPod problem??  If so, I would be surprised if Apple do anything quickly about it - they're more worried about iPhone problems I expect, and we (iPod users) are just the poor relations...  C'mon Apple - SORT IT OUT!!!!

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

Maybe you are looking for

  • How do I transfer music from my ipod touch to a new itunes library on a different laptop

    I have purchased a new laptop and have downloaded itunes. I now want to transfer the content from my ipod touch to the itunes library on the new computer. I have tried 'tramsfer purchases" but it has only transferred a small % of the material purchas

  • My pdf get covert to word i dont want to

    all my pdf files are converted to word i dont want to be kindly help me Regards Gasper Jesudas

  • Need ABAP code for Datasource Enhancement

    Hi All, I need no Enhance the WBS Element(PS_PSP_PNR) to2 LIS_02_ITM Datasource the table EKKN Having WBS element From EKKN Table We have to take the filed Append to the2LIS_02_ITM datasource Please any one give me ABAP code which is write in CMOD Th

  • SLD Naming strategy

    I have different application that sends files into FTP in different folders. Do I need to create <b>one</b> business/techical system in SLD with generic name like FILE_SYSTEM? This system will have several channell in ID. Or I need to create each bus

  • My Adobe Air project shown as open source...

    Hey all, wonder why when my project installed on my computer, when I open the installation directory I can see the *.html files source, *.js source.. and all files of my project?