My ipod touch screen has gone white with bright white spots, I have restored it but it is still white.  It shows in ITunes but I cant do anything with it.  Can anyone help please

My Ipod touch screen has gone white with bright white spots on it.  I have restored it and it shows in ITunes but the screen is still white.  Is there anything I can do? The warranty has run out so I will have to pay for any repairs (if it can be repaired).  Any help would be much appreciated.  Thank you in advance.

If you still have problems after restoring the iPod to factory defaults/new iPod then you very likely have a hardware problem.  I would make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • HT4972 i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?

    i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?

    Would this matter then? can you not update the 3g to the lastest software?

  • Hi, I had to renew my iPhone 4s and I backed up all my data to iCloud and since starting up and transferring my information over i cant receive or send messages, can anyone help please

    Hi, I had to renew my iPhone 4s and backed up all my data to iCloud and since starting it up and transferring my information over I cant send or receive messages, can anyone help please

    Hi there,
    Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
    When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
    Some infos can help you.
    Kind regards,

  • My ipod touch screen has gone white

    Please help my Ipod screen has gone white with a feint image

    If not successful
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod Touch screen has gone white with grey lines

    I have had my iPod Touch for a year and a half, so unfortunately it is out of warranty. About two months ago it started behaving strangely. Every other time I turned it on there would be a white screen which after a few seconds would get slightly darker with vertical grey lines. The screen was still responsive, and you could hear clicking. Turning the iPod off and back on would resolve the problem and the screen would reappear with no problems at all.
    Unfortunately this got worse. Now I am unable to turn the iPod on without getting the white screen with grey lines. The iPod is still responsive. I can plug it into itunes and browse it normally.
    I've reset the iPod many times and completely reset it through iTunes with no luck.
    Any suggestions? Is this a hardware fault and is it possible to resolve? Or is there something else I can try? Any help would be very appreciated.

    My old Touch 2G has the same issue. The Apple Store Genius couldn't tell what's the problem. However, I observed that the white grey striped display appears almost every time (or at least far more often) when the iPod lays on a ground. It is fixed by tilting it 90°, so that the dock connector is pointing to the ground.
    And sometimes the density of stripes changes by pressing home (no, I don't mean switching from spotlight to first home screen page, because this happens in lock screen, when home button does nothing) or pulling out the dock cable. So I think it's something near the dock connector and home button. Hardware fail, maybe the not so fitting dock cable in the rounded dock connector is the issue.

  • Ipod classic screen has gone blank possibly not charging

    My Ipod classic screen has gone completely blank. It is 5 months old. I am in San Salvador and cannot get any support from the i shop here. Can you help.

    Hello allan63,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're not seeing anything on your iPod classic's display, please follow the steps in the article linked to below.
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    Cheers,
    Alex H.

  • My itouch screen is frozen, wont slide to unlock. have done what adviced with buttons...can anyone help please?

    my itouch scrren is frozen, it wont slide to unlock..i have done all that was adviced with the buttons but that didnt work..can anyone help please?

    Force iPad into Recovery Mode
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times.

  • Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    I have same problem.
    However, I am unable to turn on Assistive Touch.
    At one time I was able to activate it, but it went away and now I cant reactivate.
    What is the solution?

  • TS3510 I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

    I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

    I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
    As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
    Hope that helps get some on the right path to resolving their issues!

  • My ipod touch screen has turned white. the screen has turned bright white. it is not going by reseting also. when  i  shift screens then it leaves a trail and i dont know what to do. please help.

    my ipod touch screen has turned bright white. the things are visible but partially and when shift the screen it leaves trails behind. i dont know what to do help please.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • No audio for full screen on iTunes 11.1.1. can anyone help please?

    just updated to i tunes 11.1.1. the design was a bad enough of a surprise. but more importantly, if i try to play videos in full screen,the audio vanishes.
    can anyone help please? anyone having the same problem? cheers

    That was an issue that lots of people were having with 11.1 (including myself). I thought this update would fix that, but alas, no.
    Although I did discover that the Surround channel (if a movie has it) DOES work in full screen... just not the regular Stereo audio.

  • Touch screen has gone black

    Printer works great when triggered from the computer,
    but the touch screen has gone to black, permanently.
    No matter how much i press,it stays black.
    I've unplugged and replugged.
    Downloaded a new driver which allows me to trigger the scan from the computer,
    but i can't get to the fax.
    Is this a driver issue, a hardware issue...?  Not sure what firmware is.
    This question was solved.
    View Solution.

    Hi @lenny15,
    Thank you for visiting the HP Support Forums!  I understand the touchscreen on your HP Photosmart 7515 is completely black, you are able to print from the computer but cannot access the front control panel.
    I would like you to perform a Hard Reset on the PS 7515:
    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.
    If after the hard reset you are still not able to access the control panel, I suggest you call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can anyone help please? daughter has new Mac book pro - decided to use her back up data from old mac and put on pro - now has old mac.  can she delete

    Can anyone help please?  daughter in panic.  Has new Mac Pro - decided to put all her old mac on new pro via back up disk - result old mac - can she reset somehow?

    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.

  • My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?

    My iMac 24 can no longer be paired with the keyboard; it doesn't recognise any keyboard at boot up, even the one it is paired with. Can anyone help, please?
    Thank. Simon

    Brian - The batteries are fine and there has only every been one keyboard paired with it. We have tried my MacPro keyboard as well, and it will not even recognise that there is a discoverable keyboard nearby.
    Thanks, Simon

  • Btinternet has changed since 21st Nov and it no longer works on the ipad. Can anyone help please?

    Can anyone help please, btinternet have changed their servers on e mail since 21st Nov and I can no longer send or receive e mails. BT say set to the following but I cannot get it to work, any suggestions please.
    Go to your iPhone/iPad home screen and tap Settings.
    Scroll down to Mail, Contacts, Calendars.
    Tap Add Account.
    Scroll down and tap Other.
    Tap Add Mail Account.
    Put the name you want people to see when they get mail from you in the Name field.
    Enter your BT Business username in the Address field. For example, [email protected] or, where you have registered a custom domain, [email protected]
    Enter your BT Business password in the Password field.
    In the Description field enter the name you want to use to identify the account.
    Tap Next. If you get an error message at this point, tap OK.
    Make sure that POP is selected at the top of the screen.
    In the Incoming Mail Server section, change the Host Name to pop.outlook.com.
    Scroll down to the Outgoing Mail Server section and change the Host Name to smtp.outlook.com.
    Tap Save.

    Hello Kitty Galore,
    It sounds like your your photos that you take on your phone are not showing in your iPad Photo Stream.
    I would check both devices to make sure that they both have Photo Stream turned on in the iCloud settings.
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/HT4486
    How do I turn on My Photo Stream?
    After your devices are up-to-date and you have set up your iCloud account, it’s easy to turn on My Photo Stream on any of your devices:
    iOS devices: Go to Settings > iCloud > Photos (Photo Stream in iOS 6), then turn on My Photo Stream.
    Mac: Go to System Preferences > iCloud, then select the checkbox for Photo Stream. Click the Options button and verify that the My Photo Stream checkbox is selected. Open the application you want to use with Photo Stream (iPhoto or Aperture) and confirm that My Photo Stream is turned on in that application. You can also adjust your my Photo Stream settings in iPhoto or Aperture Preferences.
    If it is enabled, then I would check to make sure Automatic Upload is enabled with this article:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    I imported photos to iPhoto or Aperture from my camera, but I do not see them uploaded to the My Photo Stream album, though the service is enabled.
    In iPhoto or Aperture, navigate to Preferences > Photo Stream. Ensure that Automatic Upload is enabled under My Photo Stream and that you have an active Wi-Fi or Ethernet connection.
    If Automatic Upload is not enabled, you can either enable it and import again, or manually add the newly imported photos to My Photo Stream in iPhoto or Aperture by dragging them into the My Photo Stream album in your Library.
    Cheers,
    Sterling

Maybe you are looking for

  • I have a 3gs, thats was "upgraded" with iPad software. No Longer Works

    excuse my untech saviness when I write this: I have a 3GS, it was jailbroken for me, but not only that, it was running on Ipad software. I was told the reason was at the time there werent any hacks for the 3GS software due to the 4 being out and the

  • Why is FIOS TV not available in League City, TX?

    League City has had FIOS internet for years but no TV is in sight.  Customer service told me it was because there is no local franchise agreement, but that is handedled by the state and not our local city goverment.   Other verizon territories in Tex

  • Drive Sleep Problem

    Even though I have " put the hard disks to sleep when possible" = UNCHECKED In the Energy saver system preference... it seems as though my brand new Seagate external 300 gig - newly formatted ( with apple disk utility) HFS extended ( not journaled )

  • Copy header text from Purchage Requisition to Purchage order

    hi, My scenario is i was created Purchage Requisition 10000534 and i was maintained Header Text (any thing). Then i was created Purchase Order with reference to  purchase Requisition. But in Purchase Order Header Text not copied. Purchase Requisition

  • In month mode, my calendar marks yesterday as "today"

    In month mode, my calendar marks yesterday as "today"; if I switch to "day" and back, it corrects itself. The systems seems to have the correct date and time.  Any suggestions for correcting this? I am using Outlook on my PC to sync with the iPad and