My iTunes won't start up and i cant fix it HELP!!!!!!!!

Ok when ever i try to open up iTunes a message box appears and says "The folder "iTunes" cannot be found or created, and i required. The default location for this folder is inside the "My Music" folder." so that is what shows up, it was working last night and its not working now, i reinstalled but didnt work. So please help me out
  Windows XP Pro  

Perhaps this will help:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
Good luck.

Similar Messages

  • ITunes won't start up and can't be quit

    Hi everyone,
    this morning I was asked to install some updates, which I did. I didn't even check what they were, just authorized it. Now I can't get iTunes to start up. It just won't do it. I see the little blue dot underneath the icon in the dock but it won't open and says application not responsive or something like that. I also can't force quit it. I need to restart the computer to quit it. I also noticed that it takes absolute ages to reboot...I'm talking Windows standards (eeek!).
    Does anyone have any idea what is going on here?
    Cheers,
    Claudia

    I'm having the same problem. Logging in as my self or someone else doesn't help. Every once in a while iTunes will start and work, but after a while it will no longer be on the screen and if I go to Force Quit it show iTunes as not responding, but it won't force quit. Any help out there would be great.

  • It says that itunes was not installed correctly, and i cant fix it. what do i do?

    first it said that a file was missing and i needed to uninstall and reinsall. so i tried that and it did nothing. so i got the new virsion (10.3 ?) now it says that it was not installed correctly and i need to reinsall to fix it. so i did and it didnt do anything. i still get the same massage, "not insalled correctly. please reinstall"

    Hello megszlee
    It sounds like there was an issue when installing the update. The following article may be of assistance:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • Have a 32g itouch and when i connect it to imac and itunes iOS 5 isnt there and i cant upgrade any help

    i cant seem to find or have ios 5  or the instructions to upgrade  r coming up when  i bring itunes up i have the latest itunes installed  i have the latest snow leporad have gotten osx line yet does that make a diffrence

    Are you sure you don't have a 2G 32 GB iPod Touch? If you do, it can only go as high as iOS 4.2.1.  See this article to help you identify what generation your iPod Touch is.
    http://support.apple.com/kb/ht1353
    What happens when you click the Check for Updates button from under your iPod's Summary tab in iTunes?
    B-rock

  • Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

    Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

       Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

  • ITunes won't start and asks to reinstall after iTunes10 update.

    iTunes won't start and asks to reinstall after iTunes10 update. I have tries reinstalling, but it comes up with it again. I have uninstalled every Apple program and reinstalled them but still the same.

    What's the precise text of your message, Callum? There's a few different ones I can think of that mention reinstalling iTunes.

  • TS1717 My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer

    My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer. 

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • IPod Touch not recognized in Windows & iTunes won't start unknown error -50

    I have been trying to fix a connectivity issue with my iPod touch for almost 6 hours now. I've read all over the iPod Touch forums and none of the solutions worked for me. I've installed and uninstalled iTunes multiple times and nothing seems to work.
    Also, earlier this evening iTunes was working but it wouldn't recognize my iPod touch although it would charge. Now that iTunes won't start I'm also having problems with charging my iPod and at no time, was my iPod ever recognized in 'My Computer'.
    Someone please help! I'm at my wits end without being able to use and update my iPod. All help/insight/suggestions are appreciated and thanks in advance!

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • ITunes won't start up when connecting iPhone

    My wife has been having this trouble for awhile, and now I started having the same trouble too. She has an iMac G5 running latest versions of Leopard and iTunes. I have a Power Mac G4 (Gigabit Ethernet model) running the latest version of Tiger and iTunes I also have a USB 2.0 PCI card which has already been tested and is operating properly. Both of our iPhones are the original model running iPhone 2.0, but this problem was happening on her setup before the 2.0/MobileMe fiasco.
    Basically, iTunes won't start on her machine when she sets her iPhone into the iPhone Dock, even though it does show that it is charging. When she clicks iTunes, it syncs new data from her iMac to her iphone, but new data on her iPhone doesn't transfer to her iMac (remember, this is BEFORE the MobileMe/2.0 update). I've tried different sync cables, plugging it in to different USB ports, and always it's the same- it may work properly when I unplug the cable and plug it back in again, but after I remove the iPhone from its dock and set it back in, it malfunctions the same as I just described. It initiates a sync if iTunes is running, but not if iTunes is shut down. The crazy thing is, her syncing was working perfectly both ways until about two months before the MobileMe/2.0 switch, so I know it has nothing to do with that.
    Today, my Power Mac and iPhone started displaying the same symptoms, but with a twist- I put my iPhone into its cradle, and nothing- no charging screen and tone, no syncing startup, nothing. I turn iTunes off, pull the iPhone out of the cradle, and set it back in again- nothing. iTunes won't even start up; and when I start it up myself, it still doesn't recognize the iPhone is there. I plug the iPhone into a wall charger using the same cable I sync with, and it starts charging with no problems. I plug my iPhone cradle back into my external USB hub, connected to one of the USB 1.1 ports, and the syncing/charging works flawlessly. The weird thing is, my 4th Generation iPod Photo is on a different dock with a different cable, plugged into the same USB 2.0 card, and iTunes starts and syncs with no problems with that iPod every time.
    I've taken my wife's iMac, her iPhone, and her iPhone dock and cable in to the Apple Store's Genius Bar, but they weren't able to figure out the problem. They tried to redirect the syncing issues by trying to demonstrate iPhone 2.0's wireless push/pull capabilities, but they couldn't get that to work properly, even though all the settings on the imac and the iPhone were correct. All they could suggest was that I must have had a "bad upgrade" when I upgraded to Leopard (6 months ago?!?), and that I should try an "Archive and Install" of Leopard again to see if that sorts out the issue- something I do not really have the time to do (and my wife can't really be without her Mac for that long since she uses it for work).
    I see a lot of similar issues on Apple's iPhone support pages with iTunes not recognizing iPhones when they're plugged in, or not charging when plugged in, etc. I've spent a lot of money on our Macs and our iPhones based on the idea (from Apple's own marketing) that Apple's products "just work". And darn it, with all the money I've invested into these products I just want them to WORK- EVERY TIME, without fail! These are the kind of problems I left behind in the Windows world, and I don't want their ugly heads to surface here too.

    AND ALSO I TOTALLY UNINSTALLED ANY OF MY
    ANTIVIRIS THINGYS AND THE SPYWARE STUFF.I D/K WHAT TO
    DO ANYMORE!
    *~PLEZ HELP ME!~*
    Hi yesy
    If you are sure you disabled your AV/antispy and you get the flash of a licence it sounds like you may have a malware infection. Look out for posts by b noir and get hold of ewido - its a free AV programme - google and you should find.
    BTW, you may be in Florida and I'm in the UK, but don't shout - you're just next door in cyberspace!:) I understand your frustration coz I've been in your place. There are some really helpful folks on this forum - seek, and you shall find!
    Local retailer custom built pc. Pentium 4 chip 2.4GHz Windows XP SP2 20Gb iPod
    Local retailer custom built pc. Pentium 4 chip 2.4GHz   Windows XP   SP2 20Gb iPod

  • Please help - iTunes won't start anymore: unknown error -69

    Hello out there,
    please can anybody help me: all of a sudden my iTunes won't start any more - it only shows a message stating an unknown error -69 and then quits.
    I did not change anything on my system before that, so I just don't know what could trigger that...
    I am using iTunes 7.0.2 on Windows XP SP2, both German versions.
    Before posting this question I searched the archives and tried the following, all to no avail:
    1. disabled "safe mode" in QuickTime audio options -> problem remains
    2. set speakers to "stereo headphones" in Windows sound options -> problem remains
    3. deinstalled iTunes, downloaded the installation file again and reinstalled it -> problem remains
    4. deinstalled iTunes and QuickTime, downloaded QuickTime stand-alone version, installed this and afterwards iTunes again -> problem remains
    5. deinstalled iTunes and QuickTime again, deleted all iTunes and QuickTime data folders, reinstalled everything again -> problem remains
    6. ran a CHKDSK an the drive iTunes is on -> no problems found
    It still won't start, always giving this unknown error -69.
    Please, does anybody know what to do?
    Any hints and help are much appreciated!
    Thanks a lot
    and best regards
    Frank
    PC   Windows XP  

    See if this helps: iTunes displays a -69 error when syncing iPod

  • Itunes won't start - I get error message to re install due to missing registers

    iTunes won't start - get error meassage to reinstall - did that 9 times still won't start

    See Troubleshooting issues with iTunes for Windows updates. Should you run into problems please post the full and precise text of any error messages.
    tt2

  • Itunes won't start-says it has to shut down

    i started having problems with itunes and downlaoded the new itunes. won't start. in the error report it sayd its a compatability issue. when i send the report to ms though, they claim it to be an itunes problem. i could use a lot of help.

    +when i tried to start quicktime it produced the same message as itunes with a little change to it. in the last part of the code it was 1482appcomp.txt.+
    That problem will be causing the iTunes problem.
    So let's try swapping out your existing QuickTime for a fresh copy.
    Head into your Add/Remove programs. Uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    Switch off antivirus and antispyware applications prior to the repair install.
    Go into Add/Remove and select itunes. click "Change" and then click "Repair".
    If the repair install goes through okay, restart the PC and try launching itunes again. Does it launch properly now?
    (If, however, you get an error message on any of the install or uninstalls, let us know what that message says. Precise text, please. Include any error message numbers if you're getting any.)

  • Itunes won't start up - can't find usr/lib/libstdc++.6.dylib

    Hi,
    I had to reinstall the OS 10.3.9 on my ti-book. I did an archive and install, but now iTunes won't start up. Console says it can't find this dynamic library:
    usr/lib/libstdc++.6.dylib
    Since I have a lot of my songs in my personal lib on this machine, and podcast susbscriptions, etc - I don't want to lose them if possible.
    Is there a way to just install this lib, or will I have to reinstall iTunes altogheter?
    I searched for the above file, but can't find it on the disk.
    thx.
    'mark

    Do you have any iTunes plugins? You may want to get rid of them and try again.
    Also, have you tried removing the corresponding com.apple.itunes.plist files from <youraccount>/Library/Preferences, logging out, logging back in again (or rebooting) and then relaunching iTunes? I don't think an archive and install will refresh this file for you. Nor will reinstalling iTunes.

  • TS1717 itunes won't start because it says the folder was made in newer version, what should be done?

    itunes won't start because it says the folder was made in newer version, what should be done?

    If you haven't deliberately tried to downgrade iTunes then it is possible the library is corrupt. This approach should work.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Update 7.43 to 7.6 - iTunes won't start  but have iTunes.exe Task

    Hi There!
    I updated my Company-Computer from iTunes 7.4.3 to 7.6 and now iTunes won't start.
    All it does is: It shows the waitcursor for a few seconds and I get a Task in the Taskmanager that says iTunes.exe
    But it won't show the EULA where I am asked to accept Apples Terms.
    I updated my Laptop too and that works fine.
    I checked all the Services that where running (on both systems) and they where identical.
    What else could prevent the EULA window from appering? And if I acceped the EULA would iTunes start ok?
    Has anyone had the same problem and what could I do?
    So far I deinstalled iTunes and everything else (AppleLike) and cleaned the registry of all iTunes and Quicktime branches. After a reboot I installed it again - so far it didn't help.
    Has anyone an idea what I could try else (reinstalling windows ist out of the question since it is may workplace PC; everything else works fine.
    Thanks in advance
    René

    Hey Everyone,
    I am going to add to the long list of outrage. I JUST purchased (like literally...9 hours ago...) an 8GB iPod Touch and after installation I ran into the EXACT same problem. Since I am a new owner this is the first time I have iTunes installed on my computer. So of course I downloaded the most recent version (as instructed). Like everyone else in this thread is saying, you try to open up the iTunes application but the GUI doesn't appear at all. Apparently "something" is running because its process is active in the Task manager but there is nothing on my screen! What's the problem here??? I've done everything short of reinstalling XP (thats actually kind of unnecessary as you shouldn't have to uninstall an entire OS just to get an application to work...update files or clean the registry--sure...uninstall then reinstall--no..). Yes, obviously this is an Apple product so there won't be many (if any) conflicts when connecting to an Apple device (like a Macbook). But seriously guys....seriously???
    What is more outrageous to me, besides the fact that this is a widespread problem...is the fact that this is a CURRENT problem that has YET to be even identified or rectified by anyone from Apple. I went on this forum, thinking that this was some known occurrence that happened maybe months ago and could be fixed immediately--but I am viewing messages from this week and even TODAY!
    This is absolutely unacceptable. Who needs to be contacted concerning conflict resolution with Apple hardware? Or does Apple wish to have another iPhone-esque debacle like a few months ago?
    Not to be rude, but I am not the average user that knows nothing about software and/or hardware (as I'm sure alot of others are knowledgeable). I am not "that person" that doesn't plug in the computer into the outlet then wonders why its not working. I don't mean to come here with an air of anger but this is truly ridiculous...lets get the ball rolling on a fix or start drafting up those $299.99 refunds...

Maybe you are looking for

  • Date issue while transfering pics from macbook to external drive

    Hello I am transferring pictures from my Macbook to an external hard drive and my issue is that the date of the picture (date of creation/modified) is being replaced by the date of the transfer- So let say that all my 2013 pictures have now the date

  • Print spooling

    I am having trouble printing form a DOS based application on one of our work stations. I am trying ot print to an OKIPAGE 14ex connected directly to the Netware server running version 5.0. The workstation prints just fine from Windows but not from th

  • UPDATE query suggestions

    We have a need for an update query, but we're starting with a SELECT statment to make sure that the update will only change the required number of records. We started with: select t1.act_num, t1.text || ' ' || (select text                            

  • ... Edit in place ...

    Hi, I'm triying to setup a device to use it as edit in place. I've 3 MBP, one of them is the server with ESATA hard disk share. I access to the hard disk via network. this hard disk is setup for proxies etc ... I just want to manage project version i

  • Antenna/Reception problem

    I am just trying to take a find oute if the reception issue is anyhow related to size. Could you just post yes or no and then the size. I am just curious of this since I have a 16gig on order at Best Buy and they keep telling me they have not had an