My laptop is running slow after getting it back from HP repair

I brought my Laptop to HP for repair because the hinges were detached from the pc. After I got it back the problem was fixed but now my laptop is running slow. The windows booting is slower, the internet is slower, the entire computer freezes up once and awhile for a total of 10 seconds, my programs and apps take longer to display on the screen. I did an anti virus and malware scan, all came back good. I did a clean windows install, I did a disk defragment, a registry clean, a Ccleaner clean up, driver update, but nothing is fixing the issue. I did 2 very long hard drive tests, one in the bios, and one using a downloaded software and all came back as passing but I suspect it has to be the hard drive. I did a memory test incase it might be a Ram issue but that also passed.

joemorgan788 wrote:
Edit: I also forgot to mention that after recieving my laptop back from HP they gave me a paper that says what was replaced on my laptop. It was the motherboard, hard drive, optical disk drive, and the broken plastic that caused hinges to come off.
They changed all that because of some broken hinges?????
Please indicate the full model of your computer g7-xxxxx
Are Windows updates up to date and are you using Win 8 or 8.1?
What AV program are you using?
How long has this been going on and could you send a screen shot of the Startup items in Task Manager?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

Macbook Pro not working right after getting it back from Apple Store

I had to bring my last generation Macbook Pro into the Apple store to have a faulty optic drive and logic board replaced. I just got home and the date in the preferences was set to 2001 and it will not connect to my network, even though I am typing this on another Mac using the same connection. It does see it, it just shows a message with an exclamation mark in the Airport area saying no internet connection.
Any ideas of what I may need to do? Are both of these a sign that they may have messed something up? I did reboot it after getting it back.
Thanks.

Just bring it back. Have them check it out and demonstrate that it's working properly.

Ipod terribly scratched after getting it back from apple

so after i get my unfixed ipod back from apple i open the box and my ipod is very scratched. when i play music, i get this bad distorted sound, it is not from my headphones, i tried those on my computer and they sounded fine... should i just put in another claim to apple saying they messed up my ipod? or should i call them and talk to them first?
Windows XP

Call them, 1 800 MY APPLE

No audio in quicktime after getting MacBook back from Apple Store

Since getting my MacBook back from the shop (they claim it was a mechanical HD failure but it seems more likely the crash was caused by the 10.4.11 update), Quicktime movies play with video, but no sound. I've tried going into the MIDI Audio utility, but all I see is "Audio output not supported." The text is grey and I can't do anything.
Anyone have any ideas?

Take your computer back to the Apple Store so that your computer can be fixed properly.
When it’s time to pick up your computer from the repair shop/Apple Store:
* Before you leave the repair shop/Apple Store, make sure you have the repair tech(s) power the comp up and demonstrate that it is indeed working & repaired properly too your satisfaction.*

Ultranav not recognized at all by windows 7 after getting it back from servicing

Hello,
I just got back my W530 form servicing due to BSODs, they replaced the memories, mother board, and a power cable, and now the Ultranav pointing device doesn't work, and isn't listsed in the device manager.
What should I try? I have already tried installing the drivers from the website to no avail.
Thanks!

After I install the driver from the Lenovo website, and I open the mouse setting in Windows, I get the following error.
If I uninstall it, and reboot, the problem still exists.
Any suggestions?

BSOD after getting it back from servicing

Hello everyone,
I recently had to send my W530 in for servicing due to random sleeping / lockouts.
I got it back and they replaced the motherboard, SATA7 C500AF, the two 4GB PC3-12800 DDR3, AUO 15.6FDH.
The first time I boot it up I get a screen telling me that I have to choose between safe mode, restarting it from a known working ..., and restarting windows normally. So I restarted windows normally and I got the BSOD.
I believe I will have to restore Windows 7 via CD, am I correct? What can I try?
Thanks!

Hi, grndnl
Yes, I can. Apologies for not being in more detail in my last post. When entering Event Viewer, open the tree for Windows Logs in the left pane and then select System Logs. You should see the central pane change and a very large list appear in it. Scroll through the list to the last time a BSOD occurred and see if any warnings or errors are present during that time.
If nothing is appearing here, there is also a setting that will make the BSOD stay on the screen indefinitely until you restart the system by pressing the power button. This will allow you to copy down the codes and/or take a photo of the screen. To get to this option, open the start menu and right-click on Computer and select Properties. A window will open up. Select Advanced system settings from the right. Another winodw will appear. In this window, select Settings underneath Startup and Recovery. There will be a box in here labelled Automatically restart. Make sure this box is unchecked, then select OK. Select Apply, then OK from the previous menu and you should be set.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

My macbook is running slow after upgrading to yosemite

Other's have posted similar experiences by when I ran etrecheck I didn't get a bunch of fails and yet my computer is extremely sluggish since moving from snow leopard to Yosemite. So much so, that I'm considering going back. Programs load slowly and switching between programs has a delayed response. Reminds me of the PC I had before I bought my macbook in 2008.
Any ideas on what might be causing the slow down?
Problem description:
Mac is running slow after upgrading to Yosemite.
EtreCheck version: 2.1.1 (104)
Report generated December 10, 2014 at 10:51:13 AM PST
Hardware Information: ℹ️
MacBook (13-inch, Aluminum, Late 2008) (Verified)
MacBook - model: MacBook5,1
1 2 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
Cinema Display 1680 x 1050
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:33:11
Disk Information: ℹ️
ST9500420AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (196.94 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS21N
USB Information: ℹ️
Microsoft Microsoft® 2.4GHz Transceiver V1.0
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/StartupItems/Parallels
[not loaded] com.parallels.kext.Pvsvnic (3.0) [Support]
/System/Library/Extensions
[not loaded] com.parallels.kext.ConnectUSB (3.0.0) [Support]
[not loaded] com.parallels.kext.Pvsnet (3.0) [Support]
[not loaded] com.parallels.kext.hypervisor (3.0) [Support]
[not loaded] com.parallels.kext.vmmain (3.0) [Support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Parallels: Path: /Library/StartupItems/Parallels
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[running] com.adobe.AdobeCreativeCloud.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
User Login Items: ℹ️
Citations Application (/Applications/Papers.app/Contents/SharedSupport/Citations.app)
iTunesHelper UNKNOWNHidden (missing value)
Time Out Application (/Users/[redacted]/.Trash/Time Out.app)
AdobeResourceSynchronizer Application (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
iTunesHelper UNKNOWN (missing value)
Caffeine Application (/Applications/Caffeine .app)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Garmin ANT Agent Application (/Applications/Garmin ANT Agent.app)
Google Drive Application (/Applications/Google Drive.app)
Stickies Application (/Applications/Stickies.app)
Dropbox Application (/Applications/Dropbox.app)
Box Sync Application (/Applications/Box Sync.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
XPSLauncher Application (/Applications/Xerox/PrintingScout/XPSLauncher.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
AmazonMP3DownloaderPlugin1017287: Version: AmazonMP3DownloaderPlugin 1.0.17 [Support]
Google Earth Web Plug-in: Version: 5.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.2.1.11 [Support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
wkDimdimControl: Version: 1.01
DirectorShockwave: Version: 11.6.6r636 [Support]
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
fbplugin_1_0_3: Version: Unknown [Support]
Move_Media_Player: Version: npmnqmp 071505000006 [Support]
Safari Extensions: ℹ️
Extensions: No such file or directory
3rd Party Preference Panes: ℹ️
BrowserPlus [Support]
Carbonite [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 302.31 GB
Destinations:
Lottia [Local]
Total size: 1.00 TB
Total number of backups: 65
Oldest backup: 2010-12-28 19:41:55 +0000
Last backup: 2014-12-03 21:58:08 +0000
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 302.31 GB X 3)
Top Processes by CPU: ℹ️
      70% iPhoto
      20% TOCGenerator
      18% WindowServer
      9% Time Out Break
      6% CarboniteDaemon
Top Processes by Memory: ℹ️
463 MB iPhoto
137 MB Mail
116 MB Google Chrome
106 MB WindowServer
99 MB iTunes
Virtual Memory Information: ℹ️
114 MB Free RAM
1.39 GB Active RAM
1.21 GB Inactive RAM
857 MB Wired RAM
6.24 GB Page-ins
34 MB Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 09:18:41 AM Self test - passed
Dec 9, 2014, 03:44:57 PM fontd_2014-12-09-154457_Postelsia.crash
Dec 9, 2014, 12:12:52 PM CarboniteDaemon_2014-12-09-121252_Postelsia.cpu_resource.diag [Details]
Dec 8, 2014, 10:27:45 AM CarboniteDaemon_2014-12-08-102745_Postelsia.cpu_resource.diag [Details]
Dec 7, 2014, 01:04:27 PM CarboniteDaemon_2014-12-07-130427_Postelsia.cpu_resource.diag [Details]

Also resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Upgrading RAM till 8GB could also help the system performance.

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time -been

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.

I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Mac book pro running slow and getting pop ups

mac book pro running slow and getting pop ups

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Imac 11,2 running slower after installing software updates

I purchased my imac 11,2 Sept. 2010. I recently downloaded my software updates that included airport utility, itunes and canon printer software update. Since these downloads, the imac has been very slow. Does anybody have any suggestions why my imac runs slower after software updates and what can be done to get my imac back to previous speed.

isis24680,
Welcome to the Apple Discussions!
Did you run Disk Utility> Repair Permissions? Do you have your eMac in display-only sleep overnight, or use a utility such as OnyX, or otherwise ensure the Unix crom maintenenace scripts run? OS X 10.4.2 (in 7/05) included provision to force the maintenance scripts when sufficiently oberdue; it's possible you're seeing the Mac trying to catch up on a year-plus worth of maintenance.
Do you have anything showing in System Preferences> Others, especially anything that adds to the menu bar? You'll need to check that any add-on system utilities or background programs are updated to run properly under 10.4.6; a quick way to check is to Start Up in Safe Mode and see if performance returns to normal.
Open Applications> Utilities> Activity Monitor, show all tasks, and sort the list by CPU. Is their anything regularly showing up at more than say 15% of the CPU usage?

Video both in source window and edit window stops after just a few seconds. It also runs slow after a few seconds.

Video both in source window and edit window stops after just a few seconds. It also runs slow after a few seconds. I don't if the problem is the fact that it;'s a Vimeo down load. Any one got a suggestion as to why?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Computer runs slow after installation

Hi,
A little over a month ago I installed Tiger (using CDs) onto my iBook 10.1.5 OSX, 256MB, Power PC G3. A couple of times the computer ran slow at the start up but I would just re-start the computer and then it ran fine. This morning I turned it on I can't get it to stop running slow. Start up takes forever and any application I open takes a long time to start and runs slow after. What can I do to fix this?
Thank you,
Melissa

You have adequate free hard drive space but keep an eye on it.
But I do use quite a bit of memory on my itunes, about 5GB.
How did you determine this?
If you read the link I provided carefully, OS X makes automatic/dynamic use of Paging or Virtual Memory regardless the amount of RAM installed which uses available free hard drive space when utilized. This is released when logging out of your account and after a shutdown and/or a restart.
The less RAM you have installed, the more Paging or Virtual Memory will be used depending on the number of running applications at a time and what each application is performing. This can make the system feel and operate more slowly.
Check Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.

Macbook Pro still running slow after reformat

So my Macbook pro, which is about 3-4 years old now, just started running slow after the latest update i did, whichever the latest one was. Possibly a security update or whatever it was. So i decided it was time to reformat and just clear out the stuff on my computer so i erased the HD and reinstalled Snow Leopard. After all that it still lags and is slow. Its slow on things like scrolling down a web page, or opening programs, or when i use expose, it isn't super smooth like it normally is.
My MBP has 4gb of ram and 2.2ghz. I have also tried to repair the disk permissions, but didnt seem to help drastically. Any suggestions?

Hi there,
Have you applied all updates? Using Software Update or manually? Checked for EFI and SMC versions?
Don't you have any clue from Console logs?
Repair as T posted and bring back news and info about your Graphic Card.
Good luck.

Why is my safari running slow after updating my mac?

My safari is running slow after completing a software update. I have cleared the cache. It did not help.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
If you're running OS X 10.9 or later, select the Advanced tab in the Preferences window and uncheck the box marked
Stop plug-ins to save power
Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Enable Private Browsing in the Safari menu. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If Parental Controls is active for any user, please turn it off and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

My laptop is running slow after getting it back from HP repair

Similar Messages

Maybe you are looking for