My laptop keyboard is having problems. I took it if to change my bottom case it worked fine prior and then after just the power key worked. I cleaned everything nothing is bent in the cable. now my power key is not working
Hi my keyboard is not working I took off the bottom case to change it prior my keyboard was fine and after just the power key worked. I checked everything no portions were bent and it plugged in good. I tried to turn it on this morning and now the power key doors not work??
Back up all data.
Triple-click anywhere in the line below to select it:
pmset -g assertions
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
Similar Messages
-
when i try starting my IPod it won't start, the Apple logo comes up for a few seconds,and then. it just shut off . I tried to charged it through an outlet, the IPod didn't eve charger so I tried to restore my setting in my computer, i tunes won't
But that requires the computer to see the ipod. I am having the same problem and I keep being told to restore it, but you have to either get the ipod to turn on or have the computer see it in order to so that. Right now I have a pretty useless 32GB ipod touch cos I cant get the thing to turn on! I can only get the apple logo for like maybe 20 seconds and it goes away. Ive charged it for days on a wall charger, on the computer usb charger, and on a speaker charger. Nothing works.
-
I use an iPod nano 5th generation. I have had it for about two years now and after about one year, I plugged in my iPod into my computer to sync more music. Here is the problem: The tab where you go to sync music to your iPod and shows the list of artists and songs you want to sync to the iPod, the tab I can get to but the list of songs and artists does not show up and the only way I can sync music to my iPod is to basically wipe my iPod and start from scratch. Obviously, I do not want to do that because I do not have all the songs in my library that I have on my iPod. I have uninstalled iTunes and then re-installed it, but it did not work and I do not know what else to do. I would really appreciate helpful guidance to get it fixed if it can be fixed. Thanks in advance
http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
Os lion crashing on mac pro now and then after startup trying to open first app
Os lion crashing on mac pro now and then after startup trying to open first app like safari, nothing seems to respond then I restart it and its ok. Then after many uses it does it again.
Take it to an Apple Store.
Claypool Addict wrote:
I've tried holding r, command + option + p + r, option + r, c.
That command does nothing.
Try option/command/R
Don't press it until you hear the chime, don't release it until you see recovery loading, don't press other random combinations unless you know what they do. -
Hello, it's been 5 days now since my imessage has not working..and i have chatted to the costumer for two times. I took thier advice and instructions just to enable to send and receive on it but unfortunately until now its still NOT working. Is there anybody who could help me please?
Try this even if you have already. Just make sure to follow the steps specifically.
Go to settings > Facetime > send and recieve > tap on your apple id and sign out. If your not signed in then that will work as well.
Go to settings > Messages > sent and recieve > tap on your apple id and sign out.
Restart the iPad by doing the slide to power off setup. Just hold the power button on the top right till it turns off.
After the iPad has been restarted:
Go to settings > Facetime > and sign in
Go to settings > Messages > and sign in
Wait about 3 min then restart the iPad again. Same instructions as above.
When you restart you should be able to use messages again. If not then call support again and talk to someone higher than the first level support they have. -
Frustratingly, since I upgraded to Yosemite 10.10, I too am having the worst problems with WiFi dropping out. I've never had this problem before on my iMac 27-inch mid 2011 model. Turning WiFi off and then back on again sometimes works. Help please. I've already tried a lot of your suggested fixes, but without success. Why hasn't Apple Fixed this?
Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter tab, if there is one. Uncheck the box marked
Wake for Wi-Fi network access
if it's checked.
Step 5
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 6
In the Wi-Fi settings, select
Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local
Click OK and then Apply.
Step 7
Reset the System Management Controller.
Step 8
Reset the PRAM.
Step 9
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 10
Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County). -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?
Try:
iTunes: Finding lost media and downloads
iTunes: How to re-create your iTunes library and playlists
Next try:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
After updating my mac to the new operating system I have had several problems. Now my printer program is not working.
Do you have any suggestions?Start by telling us what printer you hope to use.
Look at the printer manufacturers site to see if they have a 10.9 print driver.
Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
http://support.apple.com/kb/HT1341
If the model is supported you should be able to add it & the driver will be downloaded. -
Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.
Is anyone having problems playing music on their iPhone? At times, particularly when you've got headphones in songs sound like a badly scratched CD, continually skipping in various sections of the song. Problem occured post-IOS 5 update.
-
I downloaded ios7 to my iphone and now my volume control does not work 99% of the time. Is there something I need to do to correct this?
Adjust the Volume Control in Control Center, or try a RESET.............
-
I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?
There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD -
So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
I just updated to the new software and now my app Store is not working It is just a white blank page
I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?
I'm having a similar problem.
New iPad with iOS6 just downloaded.
I cannot purchase any new items from the new Apple Store now!
It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
This is not good Apple!!
Looks as if I will have to use my iPad One to purchase from the Apple Store.
Maybe you are looking for
-
Share variable value between java script and jsp
Hi, Firends: In my old web page I used a static array to hold a set of values, and now I want to use dynamic value from datbase. I created a bean to process database data and return resultset value to an array string. I convert my html page into jsp
-
Errors in execution of packages
While executing a package on one environment, it gives no compilation error and it gives error in other environment. The error messages are like LINE/COL ERROR 0/0 PL/SQL: Compilation unit analysis terminated 1/14 PLS-00905: object package_name is in
-
Hi, I have to navigate to WEB GUi on click of a button. The screen size should be a full screen. How can I achieve this irrespective of any screen resolution of the PC. Following is the BSP Javascript code. Can anyone suggest, how to approach? <thtml
-
Hiding or deleting Alias in FTP
Hi I have a problem with FTP on 10.4.10 Server. I would prefer that outside clients could not see our share points when connected via FTP. On top of that, the local network has the FTP folder as a share point so that appears mirrored within the FTP r
-
i have been trying to update for weeks now but keeps coming up with same error: cannot update this iphone at this time as cannot connect to server as it may be unavailble or temporarily down please try later. I have windows xp reinstalled itunes many