My Macbook Air is sending a message saying my hard drive is almost full. What software is recommended to delete unused files and to delete duplicated files? Thank you.

What software is recommended to create space in my Macbook Air's hard drive?

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
          iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Similar Messages

  • My Macbook air keeps getting a message saying that the startup disk is full. I don't have picture, music, or movies on it. Im not sure whats wrong with it.

    My Macbook air keeps getting a message saying that the startup disk is full. I don't have picture, music, or movies on it. Im not sure whats wrong with it.

    The first step is to check and see how much space really is there.  From the desktop right click on the drive in the upper right corner (at least it's there by default) and select "Get Info" to see how much space it reports as free.
    It's not just media files that eat up disk space, though they are often a major contributor.  Do you happen to be running one of the virtual machine programs (Parallels or VMWare Fusion)?  When you create a guest drive there you normally have a fairly decent amount of disk space dedicated to it and that can fill the drive.
    As well, a quick fix that may buy you some time is to empty the trash if you've not done so recently.  Click on the trash folder in your dock and then in the window that comes up select the option to empty the trash.
    If you can free up some space, there are programs that will help you find what files and directories are using disk space.  I've used Space Gremlin (in the App store) for that sort of thing, though there others.  If you run that sort of utlity you'll get some idea about what is really eating up the drive space.

  • It keeps saying my hard drive is almost full even though I delete as much as possible and use an external hard drive, cant figure out where else I need to look?

    I've tried to keep my computer as organized and clean as possible. I only have 400 songs and not a ton of pictures. I can't figure out where else I need to look on my hard drive. Any suggestions?

    I can't really figure out how much I have left in memory but here is some basic info:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,5
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
    Is there somewhere to look to see a breakdown of what memory is used where?
    Thanks for your help!

  • Connect macbook pro to macbook air as if it were an external hard drive?

    can i connect my macbook pro to my macbook air as if it were an external hard drive?
    i tried using migration assistant, which will work, but i want to look through my stuff as if it were an available external harddrive, then click and drag stuff onto my new computer.

    If you are using Ethernet to connect the two computers, then enable File Sharing on the MBP. Select the MBP's Desktop drive icon. Press COMMAND-I to open the Get Info window, check the box labeled "Shared Folder." You should then be able to mount the MBP's shared drive on the MBA's Desktop and browse to your heart's content.

  • My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

    You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2.  USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head.   The fastest speeds you can typically get are about 300 Mbps.   Firewire, on the other hand, has very little overhead.  The fastest speeds you can get are very nearly 800 Mbps.  You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus.  Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it. 
    Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance.  A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
    USB 2 will work perfectly fine... just not as fast.
    Also... it's much safer to move the entire Aperture library than to "relocate masters".  Your images must be managed.  You can Aperture manage them, or you can manage them.  But someone has to manage them.  If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge.  If you do, you'll break the links to your masters and start having problems with missing masters.  If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
    Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.)  There are only two kinds of hard drives in the world:  (1) those that have failed and (2) those that are going to fail.  There are no exceptions to this rule.  Hard drives are cheap.  Backup software is built into Aperture and into your Mac.

  • Getting a message saying my hard drive has bad health.

    Hello!
    Theres a problem with my computer. Ive recently got a program to tell my Hard Drive's health. when I opened it it sayed this:
    The Program is: Hard Disk Sentinel
    Its saying my computer's hard drive has 53 Days to live?
    And the health is bad? By the way I have a Compaq Presario CQ57  Notebook PC.
    I take good care of my computer and most of the time it stays at my desk.
    Is this true? Is this fake? Will I have to replace it?
                                                                                                                                                                                       Thanks,
                                                                                                                                                                                                Sean

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    There is no way to know exactly when a hard drive may fail. The software most likely relies on S.M.A.R.T. data to try to predict when a failure may occur. Using the hard drive diagnostics provided by HP at boot up or drive diagnostics from the hard drive manufacturer should indicate the status of the hard drive.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I HAVE BEEN USING MID 2011 MACBOOK AIR 11 INCH.I AM LOSING MY HARD DRIVE SPACE WITHOUT ANY REASON.FIRST IT WAS 84.1 GB NOW IT IS 83.9 AND SLOWLY LOSING SPACE.WHY IS THAT?? PLS PLS HELP

    I have macbook air mid 2011 .. Now i am losing my hard drive space without any apparent reason..I am not downloading anything not i am adding anything still that i am losing my hard drive space for no apparent reason..pls pls help..

    I have never heard of a relation between the enabled state of Time Machine, and boot. Its probably coincidental.
    Try booting in Safe Mode (hold down shift key, whilst booting). Then check for apllications in your Users & Groups preferences that are starting up with login. Disable all startup apps, then eanable them one at a time, booting normall. See which app is possibly hanging.
    You can also try doing a Repair Permissions and Repair Disk on your startup drive. This must be done within Disk Utility when booted to your Recovery Partition. To boot to the Recovery Partition, hold down the OPTION key while booting, and select the Recovery Partition drive to boot from. Then run Disk Utility.

  • Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

    Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

    Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
    In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
    iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
    There are other ways to share files but for those two applications this is the simplest way.
    Best of luck.

  • Mountain lion will not install - messages says the hard drive is for time machine

    basically i have gone thru the install process
    I get to screen that asks which drive to install
    I have 3 drives that show up
    Mac-ssd
    bootcamp
    mac storage drive
    it will not let me pick any drive(have not tried bootcamp)
    it says that this drive is being used by time machine
    lesnorvell

    Your Mac has a directory named Backups.backupdb located on it.  If you have good time machine backups somewhere else, you can delete the directory and ML will allow you to select the drive.

  • Since installing Maverick my MacBook Air is no longer showing my external Hard drive, which I connect via USB.

    I know the external hard drive is working and the USB port works also.
    I have seen lots of complicated answers on here but nothing I can understand.
    Any help appriciated.
    Lesley

    The WD hard drive itself is probably fine, the enclosure has likely failed. WD externals are notorius for cheap enclosures failing. Try a different cable first. You can take the drive out and install it in a better enclosure, like one from OWC.
    http://eshop.macsales.com/

  • My old macbook air crashed so i got a new hard drive. i successfully restored all the music i bought on itunes but there are a lot of other songs that i did not obtain through itunes that i cant figure out how to move from my phone to my computer.

    i would like to know how to solve this problem without erasing what is currently on my phone.

    You can transfer songs that you didn't buy from the iTunes store but it requires third party software such as Suneti. This is one of the best programs I know for the task and unfortunately I'm not aware of any freeware programs that transfer music from an iOS device to the computer.

  • My macbook air won't load.  Says start up disk is full but I can't get the home page to open

    My Macbook air won't load.  Says the start up disk is full but won't open the home page so I can do anything about it

    Step 1   
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later. 
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

  • I cannot open a PDF attachment. Get message saying Preview does not recognize it. What is Preview?

    Cannot open a PDF attachment. I get a message saying Preview does not recognize it. What is Preview?

    CLICKY CLICK---> Preview - Apple Support
    Care to share which OS you are using?
    ===========
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    Click on your name Welcome "your name."
    Click on your name link
    Click on the BIO tab.  Scroll down to the bottom till you see "My Products."  This is the section where you can edit your profile.
    CLICKY CLICK-----> Help us to help you on these forums

  • TS3276 I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

    I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

    Open System Preferences > Sound > Sound Effects
    Select:  Play user interface sound effects
    And make sure the Mute box is not selected.
    Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
    Make a selection from the:  New messages sound  pop up menu.

  • My phone keep asking me to sign in to itunes store and will not allow me to download apps. it sends a message saying "Cannot connect to itunes store" what do i do?

    my phone keep asking me to sign in to iTunes store and will not allow me to download apps. it sends a message saying "Cannot connect to itunes store" what do i do?

    Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it.  So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
    Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID).  If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

Maybe you are looking for

  • Contact Sheet placement help in PS CC

    I'm still using Photoshop CC (not 2014) and would like to make sure my images all appear in a set position on a 9x12 document. This is not happening for me and the file name is located about 2 inches lower. This is very vague but any advise on how to

  • How to view the flashwebsites in iphone3g

    hi, safari is not opening the flash websites, is it possible to view the flash website....

  • Maintain number range object for object J_1IRG23A1, year 2011

    hi when i try to maintain no range for object J_1IRG23A1 with t code SNRO i get following error please specify an existing number range object how to rectify Thnx

  • SAP HELP Library

    is there anyway to download only the SAP Library for SAP 4.6c? or is it available in PDF Format? for example SAP Help for MM?

  • Solaris 10_69 -- 3/05

    I had installed 10_69 about a month ago. As this was an early release, I'd like to upgrade to the current official release. Is this upgrade possible, or will I need to do a clean install of 5/03? Thanks!