My MacBook Pro, even when connected to the power chord, will turn on for a few seconds then shut back off. Any ideas on what is wrong?

I Am trying to turn on my MacBook Pro laptop, but when I do, it starts to turn on for a few seconds then shuts off again. It has around 80% charge and even if the power chord is connected it won't turn on. Need some help because I am out of the US right now and there are not a Mac store or anything that I could go to.

HAve you tried using a different power chord? If the power chord is not the issue, it could be the power supply inside your mac.

Similar Messages

  • My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

    WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sing out and sing back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • I have an Ipad 2, I recently downloaded IOS 7.0.4, now when I open up Safari to search the internet it will come up for a split second then dissapear and take me back to the home screen. So it wont even let me search for anything.

    So can anyone tell me how to fix this problem? I cant surf the web because as soon as I click on the Safari icon it will pop up for a split second then dissapear and take me to the Ipad homescreen. This happened when I downloaded the IOS 7.0.4.  I have the IPAD 2.

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • TS4000 Tasks Disappear on Outlook 2007 (Windows 7) when added on iOS 6 device.  They appear for a few seconds, then disappear.

    I just installed iCloud for Windows on my Windows 7 PC, running Outlook 2007 and IE9.  I have been dealing with an annoying issue for years with my iOS 6 devices, where I enter a reminder (which is sync'd to my MS Exchange server), and the reminder doesn't show up in Outlook until the day after the due date.  I thought installing the iCloud control panel might help this issue.  Now the task shows up for a few seconds, then disappears (from Outlook Today screen).  It shows up in the task list if I click it, but not in my Today view, which is what I use to track my tasks.  Any ideas why this disappearance may be occurring?

    I had this same thing happen to me.  I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen. 

  • HT201210 on my iPad I get an image of the USB connection and an arrow pointing to the itunes icon for a few seconds then it switches off.  connected  to itunes via USB get a message that itunes has detected an ipad in recovery mode must restore when i do

    When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603.  I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November -  any ideas ?

    Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • While actively using the iPhone 5, Apple logo will randomly appear for a few seconds, then show up at the lock screen

    This is the weirdest thing I've ever seen an iPhone do.  I recently got the iPhone 5 from Verizon, 16GB (if that even matters) running iOS 6.0 respectively.  This has happened 3-5 times since I started using it last Friday when they started to deliver.  When this incident occurs, I'll be using my phone, as in it's unlocked and it's not just sitting.  Then, the Apple logo will appear and if I didn't know any better, I'd think my phone was turning on.  However, it only stays that way for a few seconds until it shows the lock screen, imitaing a startup.  The weird thing is, the startup time is ~30 seconds everytime I turn my device off and turn it back on.  This incident where it'll appear to be just turning on while I'm using the phone will only last for ~5 seconds.  Plus, during the incident, it nevers actually turns off the display or goes completely black.  It'll just snap directly from me using the phone to the Apple logo, then the lock screen after a few seconds.  Also, cellular services are immediately recognized after the incident, when starting up it usually take about 30 seconds.  I can't confirm this or not, but I believe this incident occurs when I press the home button to exit an app.  However, when it happens it strikes me by surprise and I can't confirm or not if this happens only when I'm exiting an app.  Not sure if this is an iPhone 5 specific problem or an iOS 6 problem...I can't really assume it's a bad power connection, since like I said it doesn't imitate a full startup of the phone, it just goes throught the screens (Apple logo -> lock screen.)
    And as a side note, I restart my phone daily.  And as rare of a problem this is, I'm not going to restore or wipe my phone and start fresh.  Just wanted to see if there was anybody else experiencing this problem and to make the problem aware. Thanks in advance for any help!!

    I had this same thing happen to me.  I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen. 

  • Sometimes my iMac starts with white lettering across the screen on a black ground and after switching off for a few seconds starts on ok ! Any ideas

    Sometimes my iMac starts up with white lettering acrossthe screen on a black background - when it's switched off for a few seconds it starts up ok. Can anyone tell me why this happens ?

    I have read on here that a PRAM reset can cure this problem:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • New Macbook Pro 15 -when i remove the power charger the computer shuts down

    Hello,
    I just bought my new macbook pro 15 inch from my campus store (first mac- finally converted from pc) and i was loving it.
    Then it randomly shut down. so i try to turn it back on... no response. so i plug in the charger and boots up so i forgot about it but then when i took the charger out it shuts down again. and when the charger is in the battery status is saying that its not charging. Anyone have any ideas??
    Thanks,
    Andrew

    Reset the SMC (System Management Controller) and re-calibrate the Battery then if it keeps doing the same thing call Apple and make an appointment for them to take a look at it.

  • I'm trying to install a game onto my MacBook Pro.  When I put the game in, nothing pops up for me to install it and when I go to "Finder" and click on the game this message pops up saying "there is no application set up to open this document".  Help!

    Does anyone have any ideas on how to fix this and get the game up and running??

    Here are the Mac requirements:
    System Requirements Mac Version (*)
    Mac OS X 10.6.1, 10.7.1, 10.8.1 or 10.9.1
    1.83 GHz cpu or better
    Nvidia Geforce 8600, ATI Radeon X1600 or better (min 256 MB VRAM)
    1 GB RAM
    2 GB free hard drive space
    DVD-ROM Drive
    Are you sure that you have the Mac version, as there is a Windows version, as well as a few game console versions.
    Sounds as though that may be a Windows or other version.

  • My iPhone will not power on. When on a charger or plugged into a computer, the apple logo will come on for a few seconds, go off within a second, then come on every minute or so and do it again. This is all without ever actually powering on.

    I have tried all methods of resetting and it still does the same thing. iTunes does not even recognize the phone. Any ideas on the issue?

    Hello Breanneg,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    Best of luck,
    Mario

  • The screen backlight of my mbp 15 stays dim even when connected to the power source. Anyone else dealt with this problem?

    It also seems that my sound can no longer be controlled by the keys on my keypad. Has anyone else experience this? I am running osx 10.6.8.

    IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Can't listen to any music on my iPhone 5, when I press play it just skips to the next song, does that for a few seconds, then goes back to artist/album/song list. HELP!!

    I just updated my iTunes on my laptop to the newest version. I connected my iPhone five to the laptop, and it asked me something about a restore. I wasn't thinking, confused "restore" with "sync" and I just hit yes.... I know, dumb. Anyways, I logged into iTunes on my laptop, downloaded all my purchased songs through the cloud, did a backup, then disconnected it. When I used my phone again, everything was different. All my backgrounds had changed, my apps were rearranged, I had old apps on my phone that I had previously deleted, etc., all signs pointing to me restoring my phone to a previous version.. None of that bothered me, I knew how to deal with it and just changed everything back to the way I had it before the restore, and everything was fine.
    Until I went to listen to some music on my iPod. I made my album choice, selected a song, and instead if it playing, it was silence. I looked at my phone and it was skipping through the songs without ever playing a single sound. That bar that shows how far through the song you are? It never moved from zero, but my songs were skipping and skipping and skipping, almost like I was hitting the "skip track" button, only faster.
    Should I re-restore my phone? Would that possibly fix it? I've checked, and my iOS and my iTunes and iPod version are all up to date.
    PLEASE HELP ME!! I can't find this topic anywhere in support, and I NEEEEEED my music.

    Hello avenmaven,
    Thank you for all the information you provided, and congratulations on your new laptop! 
    I do not think this has to do with setting up iCloud on your new computer.  You might not have the option to manually manage music checked on your devices.  This box would need to be checked if you are dragging content over to your iPhone or trying to delete by pressing the delete key:
    You can find more information at the full article:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/ht1535
    I hope this gets you back on track! Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iPod won't sync with iTunes on my new laptop!  ITunes registers my iPod, but when I tell it to sync, the sync signal in the top (spooling) window flashes up for a millisecond, and then no more.  Any ideas gratefully received!

    Hi All, Really hope some of you techies may have suggestions for this as it's driving me nuts.  I actually have a new PC and a new laptop, and the same thing happens with both machines.  With my PC, the first time I plugged my iPod in, I was asked whether I wanted to wipe everything on my iPod, and reload as per the library on my new machine.  As I use my iPod in my zumba and dance classes, I was very weary of doing this before I had checked to ensure all my music was in my library, so at that point I replied 'No'.  Since then, i~Tunes registers my iPod, but will not sync to the library (and playlists) on my i
    Tunes.  It seems bonkers to have to go as far as uninstalling, then reinstalling, iTunes.  Is there really no other way to get round this?
    Any suggestions gratefully received!

    thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess. 
    That would convenient, but sadly it is not the case. Sorry!
    Either way your welcome and best of luck!
    B-rock

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

Maybe you are looking for

  • Adding a Subreport to existing report and getting this error, "Unable to connect: incorrect log on parameters"

    I have taken on an existing vb.net project done in Visual Studio 2008 with crystal reports version Crystal Report XI. The reports on their own work very well. Problem is I need to add information to my report which is a 'many-to-one' situation where

  • Flash Player fails to load on start-up

    I recently upgraded to Flash Player 11.2.202.235 for my Win 7 64 bit system and have had nothing but problems since.  I can install Flash Player and it works fine, until I shut down or restart my system.  Once the system restarts, it is as if Flash P

  • How to send mail in html format in jsp???

    Hello everybody, I have two jsp pages.In one page I have the heading like Date,Transaction.I am retriving data from my second jsp page.And I hae included the second jsp page to my first jsp page.How to send mail this content in html format. Thanks Sr

  • Whitelist implementation and test?

    I want to configure a whitelist for SpamAssassin I have modified local.cf, adding 'whitelist_from [email protected]' and restarted amavisd successfully but the amavis.log does not indicate that the whitelist lookup is working. Specifically it reports

  • EAS 6.5 fix pack 3 login issues

    I was successful in installing the base s/w for 6.5 and was able to login with the admin password login. Installed the fix pack 3, install logs shows no errors, but logging into the console for the first time with the admin password login gives me th