My macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this

    My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this.My OS is OS X 10.6.8.

    Usual first things to try are a smc and pram reset.

  • Why my macbook pro freezes when I export pictures to usb flash memory

    I am a new mbp user and mainly organize my travel pictures using my macbook but recently I cannot export my pictures to "burn" or copy to other flash memory.
    I have been diligently backing up using the time machine but as the file size grows i think I am running out of memory. Or is that the reason why?
    Can anybody help?
    Many thanks
    hlfrombc

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

  • This will be my first time buying a laptop and I was thinking about the macbook pro with retina display but the price is a little to high I was wondering for any suggestions?  Like other ways to get it cheaper?

    This will be my first time buying a laptop and I was thinking about the macbook pro with retina display but the price is a little to high I was wondering for any suggestions?  Like other ways to get it cheaper?

    Actually you could get student discount from apple and a 10% dicksmith with limited time and I think jb hi fi gives even better discount. But lets see what other people think?

  • Why does my macbook pro freeze when updating my iPhone to iOS 4

    when i try to uodate my iphone 4 to ios 5, my macbook pro freezes up in itunes and i cant use it. i try to close out but nothing works, it cant force quit, and it just doesnt like me. please help!

    Everyone is trying to update their iPhones. The servers get clogged. Wait several days and try to do it at an off peak time.

  • Macbook Pro Freezes When USB Plugged In

    Just like the title says, my Mid 2012 Macbook Pro 13 running 10.8.2 freezes for an averge of 15 seconds whenever I plug anything into the USB ports. It varies depending on what is plugged in. Phones, both iPhone and Android make it freeze for about 15 seconds, USB drives are usually just a couple seconds. I dont even know where to begin when trouble shooting this. Any ideas? Thanks in advance.

    Hi guys,
    I have the same problem with my MacBook Pro. When I plug in any usb device I get a short freeze of the pc for about 5 seconds. During my tests, I noticed that the freezing starts from the first time that i move the touchpad. It means that if I plug the usb device and I move the touchpad after 30 seconds, I get the freazing from that time for 5 seconds. if I continue to move the touchpad while I plug in the usb I don't get any freeze. Moreover, I noticed that if in the meantime that I plug in the usb I move the touchpad without any interruption, I don't get any freezing.
    I don't know if the problem could be related to the touchpad or not... Help!!!
    Here my log:
    24/02/2013 22:12:44.000
    kernel[0]
    USBMSC Identifier (non-unique): 088810000000 0x1f75 0x888 0x15
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Mounted /dev/rdisk3s1 (Read-Write, label "Data HD", NTFS 3.1)
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners,nosuid,adap tiveuid,adaptivegid
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners ,nosuid,allow_other,nonempty,relatime,fsname=/dev/disk3s1,volname=Data HD
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    License: Valid.
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    Ownership and permissions disabled, configuration type 1
    24/02/2013 22:12:45.991
    fseventsd[44]
    check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x1041d1528)
    24/02/2013 22:12:46.076
    fseventsd[44]
    log dir: /Volumes/Data HD/.fseventsd getting new uuid: C8912524-D7CB-46FE-99AE-420260B97608
    24/02/2013 22:12:50.000
    kernel[0]
    USBF:
    107857.423
    AppleUSBEHCI[0xffffff8014dc8000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1d, timing out! (Addr: 2, EP: 0)
    24/02/2013 22:12:50.511
    hidd[43]
    MultitouchHID: device bootloaded
    24/02/2013 22:12:50.000
    kernel[0]
    AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
    24/02/2013 22:12:50.000
    kernel[0]
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized

  • MacBook Pro Freezes When Viewing Any Video with new iTunes

    I, too, am having problems with the latest iTunes update. My MacBook Pro freezes completely. Total lock-up. This happens when trying to view any video, including video podcasts. I have to hold down the power button for several seconds to get my laptop to turn off. Any other MBP users experiencing this?

    Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

  • MacBook Pro freezes when trying to shutdown

    My macbook pro freezes and the screen turns blank when i try to turn it off. instead i have to hold down the power button and get the "mac os x shut down or something" message. it happens randomly and i cant figure out what to do. i have tried all of the restarts and have done a virus scan, although i know macs dont get viruses. any help?
    2.2 GHz, 2 GB, 128 Video RAM, 15in Leopard, Intel Core 2 Duo

    Please post the specs of your macbook pro including hard drive size and amount of free space, graphics card, and installed RAM.  This will help folks help you.

  • MacBook Pro freezes when using any app other than the web browser.

    My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • MacBook Pro freezes when using 3D software

    Every time I use heavy 3D software (such as Archicad or World of Warcraft) with the graphic card NVIDIA GeForce 9600M GT, after few minutes the system freezes, audio loops and I need to forcibly shutdown the MacBook Pro. It's a very BAD issue. How can I resolve it? May I have to replace the MacBook Pro with a non-defective one?

    I've had exactly this problem (though with the 9400 as well). The machine went back under warranty and has just been returned after the logic board was replaced. I'm still testing to see if the fix has solved the problem.
    This seems a fairly widespread issue and has been called the Black Screen of Death.

  • Macbook Pro freezes when I unplug USB hub

    When I unplug my USB hub from my Macbook Pro it freezes up and I have to turn it off and back on. I did not have this problem before, it just starting happening recently. The only thing plugged into the hub at the moment is my keyboard which has the wireless reciever for my mouse plugged into it. Any solutions would be greatly appreciated as this makes it a hassle to take my Macbook anywhere.
    The USB hub is Gigaware brand, my keyboard is Apple, and my mouse is a Logitech MX Revolution, if that helps. I also have a LaCie 1tb external hard drive plugged in but that's using the firewire 800 slot so I wouldn't think that would affect it.

    I have a somewhat similar problem with my Macbook Pro and USB hub - it just started happening last week as well. I have a USB (external power) hub that hooks to an audio interface, piano keyboard, wireless keyboard and mouse. I normally have my laptop off when I hook up the hub because I've been traveling. Last week I plugged it in while the computer was on and the hub froze. I turned off the computer and unplugged everything. I turned everything back on and the hub worked...for a few minutes. Now anytime I run any type of audio or video from the computer (itunes, LogicPro, internet video) the hub freezes as soon as I press play. Then the program (like Itunes) freezes and I have to force quit. This makes me wonder if it is not the hub but something that the computer is using to run audio and video. None of my external equipment has caused problems for a year now - there is no new equipment - and just the standard Mac software updates.

  • MacBook Pro Freezes when waking up..

    My MacBook Pro has started to freeze up, everytime I try to wake it. When ever I'm done using my Mac I simply Log Off and close the lid. When I return I open the Lid. And thats when I get the Log In screen, and the spinning beach ball. It never seems to time out. I have to do a hard reset by holding the power button. I searched the support page. And Apple's recomendation was to DL EFI update1.9 . (My Mac Book is a Mid 2010) But when I try to run it I get an error message: Software not supported by your system. Does anyone have any suggestions...
    Thanx

    Last resort, but if it fixes your problem then I guess that is a plus. If you are under warranty, I would suggest you cash that in while you can. Please reads the risks or unsaved work:
    So here is how to change power management (Hybernation) to see if this fixes your problem:
    You can change the way your computer hybernates from hybernatemode 3 to 0.
    3 = RAM is powered on while sleeping, but RAM contents are also written to disk before sleeping. In the event of total power loss, the system enters hibernation mode automatically. The downside to this mode is that it is very slow. The upside is that it is very unlikely that you will lose any unsaved work should your mbp lose power.
    0 = RAM powered on while sleeping, safe sleep disabled, and super-fast wake. The downside to this mode is that it does not save any of your work, should your mbp lose power, and you would have to remember to manually save before putting to sleep. The upside is that your computer would sleep & wake up in around 2 seconds.
    Go to Terminal & type:
    pmset -g | grep hibernatemode
    That should give you a result of 3.
    To change it to 0 type:
    sudo pmset -a hibernatemode 0
    It might ask you to enter your password.
    Then delete the old sleepimage file:
    cd /var/vm
    sudo rm sleepimage
    Just remember, saving will have to be done manually by you,

  • Macbook Pro freezes when disconnected from Internet

    I'm so frustrated, I was doing important work and now I'm about to pull my hair out, I need to finish what I was doing but I can't even turn on my computer without it freezing, I literally can't even move the mouse because it freezes right on loading screen every time I restart, here's the story.
    I disconnected the Internet for just a few seconds, then the computer froze. So naturally I restarted the computer, but each time I restart, it just freezes, I can't move the mouse, I can't click on anything, it's just frozen. Let me know how frustrating that is that you don't have computer access after working on important files.
    I have a 2008 non unibody Macbook pro with OS X mavericks, I knew the computer froze when I turned off wifi, but I correlated that with the app that I was running, since I wasn't running the app this time, I thought I could turn off wifi no problem.
    But like I said, now I can't even restart or use it at all. I can't even use safe mode because it freezes there too. I can do the cmd+shift+ctrl+r thing and I can connect to the Internet that way, but there's nothing I can do from there. Once I restart, the Internet connection is still disconnected in the main operating system.

    Okay I solved the problem. For anyone who runs across this issue in the future, here is the solution:
    Step 1) Turn on the computer and hold CMD + Option + S, this will boot the computer into single user mode
    Step 2) Type in "Mount -uw /"
    Step 3) Type in "vi /Library/Preferences/SystemConfiguration/preferences.plist"
    Step 4) Scroll down until you find this part:
    <key>Interface</key>
    <dict>
            <key>en1</key>
            <dict>
                    <key>AirPort</key>
                    <dict>
                            <key>JoinModeFallback</key>
                            <array>
                                    <string>DoNothing</string>
                            </array>
                           <key>PowerEnabled</key>
                            <false/>
                            <key>RememberJoinedNetworks</key>
                            <true/>
                            <key>RequireAdminIBSS</key>
                            <false/>
                            <key>RequireAdminNetworkChange</key>
                            <false/>
                            <key>RequireAdminPowerToggle</key>
                            <false/>
                    </dict>
            </dict>
    </dict>
    Step 5: Edit the part where it says:
    <key>PowerEnabled</key>
    <false/>
    and change it to <true/>
    Step 6: Hit Ctrl + X, hit Y for Yes, press enter.
    Step 7: RESTART AND YOU HAVE YOUR COMPUTER BACK!!
    I panicked by the way because as someone said earlier, it's nearly impossible to fix:
    You cannot fix this problem with Safe Boot, Repair Permissions, Repair Disk, re-install Mavericks, restore from Time Machine backup, reset the SMC, reset PRAM, or boot into single-user mode.  Thus far, the only solution is to boot from a (homemade) Install OS X Mavericks USB, erase the hard drive, perform a clean Mavericks install, re-install your applications, and manually restore your data.
    Anyway I'm thankful for Ira Wolf 81 for figuring out, he deserves all the credit for this, I merely repeated his steps and found out he was right. Cheers.

  • Macbook Pro Freezes When Connected to iPod Classic!

    I have a mid 2010 Macbook Pro that is acting a little funky. Whenever I plug in my iPod Classic to add music everything works perfectly fine until I eject the iPod. My computer then basically freezes up (gives the rainbow spinwheel of death) and it will not recover. The iPod icon doesn't disappear, it just turns light grey and everytime my only option is to force quit iTunes. The problem doesn't end there, my computer is completely bogged down and I have to force shut it down. It is incredibly annoying... The iPod works perfectly fine when I plug it into my fiancee's older Macbook Pro, it ejects fine and I've run disk utility on it using that computer and there are no problems with the iPod. My mid 2010 Macbook Pro runs other USB devices just fine (iPhone, iPad, Flash Drives etc.) it's just the iPod.
    Additionally, every since I upgraded to OS X 10.7 the computer will not shut down/restart. It just goes to a grey screen with a spinny wheel and won't fully shut down (I've left it over night to no success still grey screen). I have reinstalled OS X several times so I'm confused on this one as well. Any information on either of these issues would be greatly GREATLY appreciated.

    I should add that I can quit iTunes with the iPod connected. When I try to eject the iPod by manually dragging the icon to the trash the funkiness begins (icon doesn't disappear just turns light grey, and the computer freezes). I have found the computer behaves if I put it to sleep with the iPod connected (the iPod will eject properly) and when I wake the computer up, everything works w/o funkiness, however the greyed out iPod icon will still be on the desktop. This is the only way I've found to be able to manage this iPod when connected to this MBP.

Maybe you are looking for

  • BG image issues, help plz

    I am using Macromedia DW MX. I am having some issues with the background tiling and not centering behind the nav buttons. If you look behind the top row of nav buttons you can see the BG issue. The problem is bad with IE but worse with Firefox. Anyon

  • No Firewire 800 input

    Hi, I currently have an iMac that I use to transport to my studio for tethering to my Hasselblad camera via a firewire 800. I am very keen to look at and probably purchase, the new imac due out soon but have just seen that it does not have the FW800

  • Restricted Distribution Question

    I've been researching restricted and private distribution, mainly reading: http://www.adobe.com/devnet/digitalpublishingsuite/articles/restricted-distribution-with-d igital-publishing-suite.html I understand you need an enterprise account for private

  • Cannot Reinstall Site Server - SCCM 2012 R2

    We just upgraded to SCCM 2012 R2. Everything went fine until the one secondary site server failed to upgrade.  After fiddling for awhile we just wiped the site out, reinstalled the server and rebuilt the site (same Server Name and Site Code).  Howeve

  • LR4 slow: more than 1/2 hour to load 93,000 picture library

    Running LR4.2 System: MacBook Pro, 2.53GHz Core 2 Duo, 8GB RAM, OS X 10.8.2 (Mountain Lion) I've been struggling for years now with a library that's extremely slow to load; the problem started sometime when I had LR3.  I'd hoped that LR4 would make t