My MacBookPro 10.7.5 had been streaming tv thru the mini port/HDMI cable. Suddenly it stopped working. My tv screen is now black. I have tried restarting the computer with the cord connected. The computer is otherwise working.
I had been streaming tv with my MacBookPro 10.7.5 for several years using a cord from the mini port to the HDMI plug on the TV. Suddenly it stopped working. My computer otherwise works fine but there is my computer screen image is no longer being transmitted to the tv. The tv is black. I have it on the correct input.
I tried restarting the computer with the cord attached. Thanks in advance.
Test the cord on another external display or test with another cord.
Ciao.
Similar Messages
-
My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/
Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?
-
I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.
If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Problems since 5.0 was upgraded.
An extra extension might have snuck in. These can be bundled with other software you might have installed recently.
Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable. (Or if completely unwanted, remove.)
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that get rid of the extra tab?
Note: I suggest also visiting the Windows Control Panel, Uninstall a Program, and clicking the "Installed on" column header. This should bring the most recent additions to the top and group them by install date so you can investigate how unexpected software might have been installed. -
every time i open firefox black bars cover the browser or when i am typing. it only happens on the firefox browser.
- Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try restoring on another computer
- Last, make an appointment at the Genius Bar of an Apple store. That way you can demonstrate the problem.
Apple Retail Store - Genius Bar -
I updated my iphone 4s and now it wont sych with my itunes. It goes through the process and says sych comlete but then nothing is updated on my phone. I have tried restarting everything and restarted the apple mobile device but nothing seems to work. Please help!!!!
ClaireDid "everything" include this: http://support.apple.com/kb/HT1808 and this: http://support.apple.com/kb/TS1275, which says:
Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue. -
my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?
iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes? -
Printer is not connected, yet the cord connects the printer to the computer
printer is not connected, yet the cord connects the printer to the computer, HP Office jet 6700, computer Mac OSX 10.9.4
Hello jbsarts,
Welcome to the HP Forums.
I see that you are having an issue with a connection error.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning. The document may have "Scanning" in the Title, but it will troubleshoot the issue just the same.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Am having all kinds of trouble enabling Home Sharing on Apple TV 3. Had been working previously, but now I am unable to share files between TV, Ipods and iMac. I have tried restarting all hardware, systems and connections. I recently upgraded modem, would this have an effect on connectivity?
U may need to check the settings on ur PC or Mac.
-
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
AdamIf you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install. -
Last night, my system was still using Firefox 3.5.8. I was playing Farmville on Facebook and everything was working fine. This morning, I log onto my computer and find that I am upgraded to Firefox 3.6. I have been trying to play Farmville all morning, and the Adobe Flash Player keeps crashing. I have tried to update the Flash Player. I have tried restarting the computer. Nothing is working.
== URL of affected sites ==
http://facebook.comTo anyone experiencing this problem after trying the steps I posted above, try this potential solution:
# Open Tools->Add-Ons->Plugins, find Shockwave Flash, and press Disable
# Hold down the '''Windows logo key''' and press '''R''' to bring up the ''Run'' dialog.
# Type '''%APPDATA%''' and press OK.
# Open the Adobe folder
# Right click on the Flash Player folder and press '''Rename'''. Type in ''Old Flash Player'' as the new name.
# Go back to the Application Data or AppData folder. (On Windows XP, click '''Up''' in the toolbar. On Windows 7 or Vista, click AppData in the address bar)
# Open the Macromedia folder and repeat step #5
# Go back to the add-ons window from step #1, and press Enable on Shockwave Flash
# Try Farmville, Youtube, and other affected sites to see if the problem is fixed. -
I have 2 apps that have been waiting to update for a week. I don't really care about the update, I would just like to use them, but the are stuck waiting. I have tried powering down, syncing with my computer...all fails. Any ideas?
At this point you have no choice but to update the or delete them and reinstall them since you wont be able to use them until they update - or come out of the "waiting" loop.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again. -
My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge on any outlet. Also it will not start when it is unplugged when my battery is at 50%. It also will shut down immediately if I unplug it from the charger, even though it says it isnt being charged by it. Can anyone help with this problem?
So you have the 13" aluminum notebook that just says "MacBook" on the display, correct?
You can get a new battery for $100 from Other World Computing here.
Alternatively, you can get one through Apple for $130 here.
I personally would go through OWC - they're a highly-recommended third party for these kinds of parts and their batteries work just as well as Apple's.
~Lyssa -
I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy
Maybe you are looking for
-
How do I get the charging port cover open on my I-pad, so that I can insert the charger?
I'm trying to connect an Ipad to a USB charger (30 pin, I believe) there is a little black plastic cover over what appears to be the charging port. How do I get this to open ?
-
I can't make it to the login screen
When I turn on my iMac after a routine shutdown it won't load the login window. It gets to the blue screen but when it's time for the login panel to boot it just freezes. I've tried booting in safe mode, I loading the disk utility from the installati
-
I have table T_PROCESS ,here there are contains 2 columns... Process_flag Process_type 1 END DATE CHANGE:PLAN ID CHANGE 1 PLAN ID CHANGE 1 MENU OPTION INSERT 1 END DATE CHANGE:PLAN ID CHANGE:MENU OPTION INSERT 1 END DATE CHANGE:PLAN
-
Hi Gurus Need yr expertise... I have followed the OSS instruction to create the service cond type for SD - JSER, JSTE & JSTS but it was marked as statistical.. How do we post it to FI if it is marked as statistical? How can I reflect the % automatica
-
My java program runs fine even if i don't specify access specifier of class
Hi, My java program runs fine even if i don't specify access specifier of class as public . Then why do they say that atleast one class should be specified as public. please help.